Quantitative nanoscale measurements of the thermomechanical properties of poly-ether-ether-ketone (PEEK)

Understanding the internal structure and organization of semicrystalline polymers, especially at the nanoscale, has many challenges for researchers to date. In this article, we demonstrate a quantitative method for investigating the local viscoelastic properties (i.e., storage and loss moduli, as well as loss tangent) of semicrystalline polyether-ether ketone (PEEK) through the combination of contact resonance atomic force microscopy (CR-AFM) and in situ local heating with a thermal probe. Furthermore, the local viscoelastic properties of the crystalline and amorphous phases were decoupled by performing thermal CR-AFM array mapping near the glass transition temperature of PEEK (T_g, 143 °C). A distinct bimodal distribution of tip-sample interaction was observed for PEEK near its T_g, providing a means to estimate the T_g and the degree of crystallinity of PEEK.     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

Facile Synthesis of Cellulose Acetate Ultrafiltration Membrane with Stimuli‐Responsiveness to pH and Temperature Using the Additive of F127‐b‐PDMAEMA

We fabricate a novel cellulose acetate (CA) ultrafiltration membrane modified by block copolymer F127‐b‐ PDMAEMA, which is synthesized using F127 and DMAEMA via the ARGET ATRP method. Compared to conventional ultrafiltration membranes, the incorporation of both F127 and PDMAEMA can not only readily increase the hydrophilicity of the membrane, but also exhibit stimuli‐responsiveness to temperature and pH. Fourier transform infrared spectroscopy (FT‐IR), nuclear magnetic resonance spectroscopy (NMR), and gel permeation chromatography (GPC) are employed to analyze the structure of the F127‐b‐PDMAEMA. The membrane properties are evaluated via scanning electron microscope (SEM) imaging, porosity test, automatic target recognition Fourier transform infrared spectroscopy (ATR‐FTIR), water contact angle test and permeation test. The results indicate that the F127‐b‐PDMAEMA is an excellent pore agent, which contributes to an enhancement of the membrane in sensitivity to temperature and pH. The modified membrane also exhibits lower water contact angle (64.5°), which is attributed to the good anti‐fouling performance and high water permeation.     

Y沸石的高温合成

采用甲基三乙氧基硅烷(MTS)为添加剂, 在高温(140 °C)条件下水热合成出具有六方片状形貌的Y型沸石. 相比于100 °C左右合成的Y型沸石, 高温合成的Y沸石具有更高的硅铝比值、更大的晶体宽厚比值以及对有机挥发物具有优异的吸附性能. 通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、²⁹Si固体核磁共振(NMR)、傅里叶变换红外(FTIR)光谱、碳氢氮元素分析(CHN)、水接触角等表征, 证明了所合成的新型Y沸石具有甲基基团, 它们的存在增强了疏水性能, 提高了对有机挥发物的吸附能力.     

Resolving the Unpaired‐Electron Orbital Distribution in a Stable Organic Radical by Kondo Resonance Mapping

The adsorption geometry and the electronic structure of a Blatter radical derivative on a gold surface were investigated by a combination of high‐resolution noncontact atomic force microscopy and scanning tunneling microscopy. While the hybridization with the substrate hinders direct access to the molecular states, we show that the unpaired‐electron orbital can be probed with Ångström resolution by mapping the spatial distribution of the Kondo resonance. The Blatter derivative features a peculiar delocalization of the unpaired‐electron orbital over some but not all moieties of the molecule, such that the Kondo signature can be related to the spatial fingerprint of the orbital. We observe a direct correspondence between these two quantities, including a pronounced nodal plane structure. Finally, we demonstrate that the spatial signature of the Kondo resonance also persists upon noncovalent dimerization of molecules.     

Synthesis and thermal properties of poly(styrene-co-acrylonitrile)-graft-polyethylene glycol copolymers as novel solid–solid phase change materials for thermal energy storage

A novel poly(styrene-co-acrylonitrile)-graft-polyethylene glycol(SAN-g-PEG) copolymer was synthesized as new solid–solid phase change materials(SSPCMs) by grafting PEG to the main chain of poly(styrene-co-acrylonitrile). The chemical structure of the SAN-g-PEG was confirmed by the Fourier transform infrared(FT-IR) and proton nuclear magnetic resonance(1H NMR) spectroscopy techniques. The thermal energy storage properties and the storage durability of the SAN-g-PEG were investigated by differential scanning calorimetry(DSC). The SAN-g-PEG was endowed with the solid–solid phase transition temperatures within the range of 23–36 8C and the latent heat enthalpy ranged from 66.8 k J/kg to 68.3 k J/kg. Thermal cycling tests revealed that the SAN-g-PEG kept great heat storage durability after 1000 thermal cycles. The thermal stability was evaluated by a thermal gravity analysis(TGA), and the initial decomposition temperature(Td) of SAN-g-PEG is 350 8C, which proves that the SAN-g-PEG possessed good thermal stability.     

Patterned nonadhesive surfaces: superhydrophobicity and wetting regime transitions

Nonadhesive and water-repellent surfaces are required for many tribological applications. We study mechanisms of wetting of patterned superhydrophobic Si surfaces, including the transition between various wetting regimes during microdroplet evaporation in environmental scanning electron microscopy (ESEM) and for contact angle and contact angle hysteresis measurements. Wetting involves interactions at different scale levels: macroscale (water droplet size), microscale (surface texture size), and nanoscale (molecular size). We propose a generalized formulation of the Wenzel and Cassie equations that is consistent with the broad range of experimental data. We show that the contact angle hysteresis involves two different mechanisms and how the transition from the metastable partially wetted (Cassie) state to the homogeneously wetted (Wenzel) state depends upon droplet size and surface pattern parameters.     

氩等离子体后辉光区对聚四氟乙烯膜表面的优化改性

在理想管式反应器中, 采用Langmuir双电子探针和电子自旋共振(ESR)诊断技术分别定量测定了氩等离子体场中各活性物种的轴向分布, 并利用氩等离子体放电区及后辉光区对聚四氟乙烯(PTFE)进行了表面改性. 通过接触角测量、扫描电子显微镜和X 射线光电子能谱分析比较了改性前后常规及后辉光氩等离子体对PTFE表面结构及性能的影响. 结果表明, 氩等离子体中电子及离子浓度随轴向距离的增大迅速降低, 30 cm后接近于0, 而自由基浓度则降低缓慢, 40 cm处仍为初始浓度的96%. 氩等离子体放电功率、处理时间和气体流量强烈影响着PTFE表面润湿性的改善效果. 后辉光区因抑制电子和离子的刻蚀作用, 强化自由基反应, 使改性效果远优于常规氩等离子体. 经氩等离子体后辉光区短时间(30 s)处理后, PTFE表面化学成分发生了变化, F/C原子比从3.27降至2.30, O/C原子比从0.02增至0.09. 脱氟作用和含氧基团(如CO)的引入是有效改善PTFE表面润湿性的关键因素.     

In situ scanning tunneling microscopy: New insight for electrochemical electrode-surface investigations

The successful expansion which the scanning tunneling microscopy (STM) has had is dependent on its ability to examine surfaces on a sub-nanometric scale and on providing in situ (i.e. in the presence of bulk electrolyte) sample examination. In addition to the ability to study metals and semiconductors in vacuo, the application of the technique to surfaces in contact with an electrolytic solution has prompted increased interest amongst electrochemists. We discuss herein the technique, with particular reference to advances in electrochemical applications. A new scanning tunneling microscope for operation in electrolytic environments is described. Atomic force microscopy, scanning electrochemical microscopy and scanning ion-conducting microscopy are compared with the STM.     

Preparation and characterization of epoxy/polyhedral oligomeric silsesquioxane hybrid nanocomposites

We have prepared epoxy/polyhedral oligomeric silsesquioxane (POSS) nanocomposites by photopolymerization from octakis(glycidylsiloxy)octasilsesquioxane (OG) and diglycidyl ether of bisphenol A. We used nuclear magnetic resonance, Raman, and Fourier transform infrared spectroscopies to characterize the chemical structure of the synthetic OG. Differential scanning calorimetry and dynamic mechanical analysis (DMA) revealed that the nanocomposites possessed higher glass transition temperatures than that of the pristine epoxy resin. Furthermore, DMA indicated that all of the nanocomposites exhibited enhanced storage moduli in the rubbery state, a phenomenon that we ascribe to both the nano‐reinforcement effect of the POSS cages and the additional degree of crosslinking that resulted from the reactions between the epoxy and OG units. Thermogravimetric analysis revealed that the thermal stability of the nanocomposites was better than that of the pristine epoxy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1927–1934, 2009     

Résonance surharmonique d'ordre deux dans un contact sphère-plan

For an impact oscillator with an Hertzian contact (sphere-plane contact), we study the superharmonic resonance of order two. Without loss of contact, one can describe this resonance by approximating the elastic contact force (third order Taylor expansion) and by using the method of multiple scales. With impacts, we use a shooting method. Results show that this resonance constitutes a precursor of vibro-impact conditions.     

Structural Evolution of Pt,Au and Cu Anodes by Electrolysis up to Contact Glow Discharge Electrolysis in Alkaline Electrolytes**

Applying a voltage to metal electrodes in contact with aqueous electrolytes results in the electrolysis of water at voltages above the decomposition voltage and plasma formation in the electrolyte at much higher voltages referred to as contact glow discharge electrolysis (CGDE). While several studies explore parameters that lead to changes in the I–U characteristics in this voltage range, little is known about the evolution of the structural properties of the electrodes. Here we study this aspect on materials essential to electrocatalysis, namely Pt, Au, and Cu. The stationary I–U characteristics are almost identical for all electrodes. Detailed structural characterization by optical microscopy, scanning electron microscopy, and electrochemical approaches reveal that Pt is stable during electrolysis and CGDE, while Au and Cu exhibit a voltage-dependent oxide formation. More importantly, oxides are reduced when the Au and Cu electrodes are kept in the electrolysis solution after electrolysis. We suspect that H₂O₂ (formed during electrolysis) is responsible for the oxide reduction. The reduced oxides (which are also accessible via electrochemical reduction) form a porous film, representing a possible new class of materials in energy storage and conversion studies.     

Preparation and Characterization of Poly(methyl methacrylate)-functionalized Carboxyl Multi-wall Carbon Nanotubes

"An in situ polymerization process was used to prepare poly (methyl methacrylate) (PMMA)-functionalized carboxyl multi-walled carbon nanotubes using carboxylate carbon nanotubes and methyl methacrylate as reactants and benzoyl peroxide as an initiator agent. The functionalized multi-walled carbon nanotubes were characterized using transmission electron microscope, scanning electron microscope, nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis and Raman. The results indicate that the PMMA chains are covalently linked with the surface of carboxylate carbon nanotubes. The surface morphology is controlled by the content of carboxylate carbon nanotubes in the reactants. The PMMA functionalized multi-walled carbon nanotubes are soluble in deuterated chloroform. The storage modulus and tanffi magnitude increase as the content of CCNTs increases up to 0.3%."     

Relationship between Hot Spot Residues and Ligand Binding Hot Spots in Protein-Protein Interfaces

In the context of protein-protein interactions, the term "hot spot" refers to a residue or cluster of residues that makes a major contribution to the binding free energy, as determined by alanine scanning mutagenesis. In contrast, in pharmaceutical research, a hot spot is a site on a target protein that has high propensity for ligand binding and hence is potentially important for drug discovery. Here we examine the relationship between these two hot spot concepts by comparing alanine scanning data for a set of 15 proteins with results from mapping the protein surfaces for sites that can bind fragment-sized small molecules. We find the two types of hot spots are largely complementary; the residues protruding into hot spot regions identified by computational mapping or experimental fragment screening are almost always themselves hot spot residues as defined by alanine scanning experiments. Conversely, a residue that is found by alanine scanning to contribute little to binding rarely interacts with hot spot regions on the partner protein identified by fragment mapping. In spite of the strong correlation between the two hot spot concepts, they fundamentally differ, however. In particular, while identification of a hot spot by alanine scanning establishes the potential to generate substantial interaction energy with a binding partner, there are additional topological requirements to be a hot spot for small molecule binding. Hence, only a minority of hot spots identified by alanine scanning represent sites that are potentially useful for small inhibitor binding, and it is this subset that is identified by experimental or computational fragment screening.     

Contact atomic structure and electron transport through molecules

Using benzene sandwiched between two Au leads as a model system, we investigate from first principles the change in molecular conductance caused by different atomic structures around the metal-molecule contact. Our motivation is the variable situations that may arise in break junction experiments; our approach is a combined density functional theory and Green function technique. We focus on effects caused by (1) the presence of an additional Au atom at the contact and (2) possible changes in the molecule-lead separation. The effects of contact atomic relaxation and two different lead orientations are fully considered. We find that the presence of an additional Au atom at each of the two contacts will increase the equilibrium conductance by up to two orders of magnitude regardless of either the lead orientation or different group-VI anchoring atoms. This is due to a resonance peak near the Fermi energy from the lowest energy unoccupied molecular orbital. In the nonequilibrium properties, the resonance peak manifests itself in a negative differential conductance. We find that the dependence of the equilibrium conductance on the molecule-lead separation can be quite subtle: either very weak or very strong depending on the separation regime.     

聚氨酯改性氟代聚丙烯酸酯的合成、表征与膜形态

在二月桂酸二丁基锡(T-12)作用下,将1,6-已二异氰酸酯(HDI)与聚乙二醇(PEG-200)在70℃反应合成—NCO封端的聚氨酯预聚体(PU),然后滴加甲基丙烯酸十二氟庚酯(RfAA)、丙烯酸羟丙酯(HPAA)和偶氮二异丁腈(AIBN)在甲基异丁基甲酮(MIBK)溶液中聚合反应4～6 h,再经丁酮肟(EtAO)封端,制得了一种新型聚氨酯改性氟代聚丙烯酸酯易去污整理剂(FPUA)。用红外光谱(IR)、核磁共振氢谱(1H-NMR)、核磁共振碳谱(13C-NMR)、原子力显微镜(AFM)和扫描电镜(SEM)等对FPUA的结构、成膜形态及应用性能进行了研究。结果表明:FPUA在亲水性纤维织物和单晶硅表面均能形成非单一结构的疏水膜。该膜附着在纤维表面,能使处理后织物表面水的静态接触角达到146.5°,色拉油的接触角达到132°,且易去污效果良好。     

Surface bio-modification of poly(hydroxybutyrate-co-hydroxyhexanoate) and its aging effect

In this work, poly(hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx) film was fabricated by a solution-casting method and subsequently was modified by NaOH treatment to improve the surface hydrophilic property. Surface properties including hydrophilicity, surface appearance and functional groups were characterized by water contact angle measurement, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results showed the hydrophilicity of PHBHHx film was obviously improved by the NaOH treatment due to the topography changes promoted by the NaOH-etching and the introduction of polar groups included hydroxyl and carboxyl on the topmost surface layers. However, the modified film exhibited an aging effect: the hydrophilicity decreases with time elapsed during storage. It was found that the aging rate was strongly dependent on the crystallinity of the film and the storage environment. The sample with high-crystallinity lost hydrophilic property slower than that with low-crystallinity. Hydrophilic and low-temperature environment also prevented the modified PHBHHx from fast losing of the hydrophilicity.     

Measurements of interfacial viscoelasticity with a quartz crystal microbalance: influence of acoustic scattering from a small crystal-sample contact

We discuss the influence of a limited contact size on measurements of high-frequency interfacial viscoelasticity performed with a combination of a quartz crystal microbalance (QCM) and the Johnson-Kendall-Roberts (JKR) apparatus. In this instrument, a sphere-plate contact is established between an elastomeric lens and a quartz resonator. The analysis is carried out in the frame of the sheet-contact model, which states that both the shift of resonance frequency and the bandwidth are proportional to the contact area as long as the contact area is much smaller than the crystal itself. In particular, the ratio of the shift in bandwidth and the shift in frequency (termed the D-f ratio) is predicted to be constant and independent of geometry. However, the experiment does show a slight increase in the D-f ratio with the contact radius when the contact radius is comparable to the wavelength of sound inside the crystal. This effect can be explained by acoustic scattering.     

Impact of the state of water on the dispersion stability of a skin cream formulation elucidated by magnetic resonance techniques

This study investigated the relationship between the state of water and the dispersion stability of a skin cream formulation. Hydrophilic ointments treated with a high-pressure wet-type jet mill were used as model formulations. Spin-lattice relaxation times (T(1)) were measured by magnetic resonance techniques to estimate the state of water in samples. A shorter T(1) relaxation time was obtained from samples with higher surfactant content, whereas the processing pressure of the jet mill and 1-week storage at 40 °C did not influence the T(1) relaxation time. Observations using scanning electron microscopy (SEM) showed that coalescence occurred in samples with lower surfactant contents (1.0% by weight) following 1-week storage at 40 °C. We also investigated samples prepared using a hydrophilic surfactant with a short polyethylene glycol (PEG) chain and with PEG-4000. From the change in T(1) relaxation times after removing the oil phase from samples by centrifugation, it was clarified that most of the surfactant was located on the surface of oil droplets. Furthermore, SEM observations showed that phase separation was facilitated as the PEG chain length of the surfactant shortened. Thus, a thin water layer over oil droplets is the most important factor for stabilizing their dispersion. This study provides proof-of-principle results on the contribution of the state of water to the dispersion stability of a skin cream formulation.     

Thermal stability evaluation of methylic biodiesel obtained for different oilseeds

Biodiesel is defined as a mixture of mono- or di-alquil esters of vegetable oil or animal fats. During long-term storage, oxidation caused by contact with air (autoxidation) presents a legitimate concern in relation to monitoring and maintaining fuel quality. Extensive oxidative degradation may compromise the quality by adversely affecting kinematic viscosity, acid value, or peroxide value. The oxidation susceptibility of biodiesel, due to the presence of triacilglycerides of poly-unsaturated fatty acids, was evaluated in this study. Samples of sunflower, castor, and soybean biodiesels were obtained through the transesterification reaction, with the intention of achieving the thermal stability study through thermogravimetrical analyses and differential scanning calorimetry high pressure. It was furthermore observed through thermogravimetry and pressure differential scanning calorimetry curves that castor biodiesel exhibited the highest thermal and oxidative stability.