利用MALDI-TOF质谱技术研究MPEG-b-PCL两嵌段共聚物的嵌段长度及嵌段分布

利用基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)结合源后分解(PSD)技术对甲氧基封端的聚乙二醇-b-聚己内酯(MPEG-b-PCL)两嵌段共聚物进行了结构分析. 根据得到的MALDI-TOF MS谱图和PSD碎片信息清晰地确定了嵌段共聚物的嵌段长度和嵌段分布. 结果表明, 采用MALDI-TOF MS结合PSD技术研究这类嵌段共聚物链结构非常有效. 这为更好地认识和应用这类嵌段共聚物提供了重要的依据, 同时也建立了分析这类嵌段共聚物的方法.     

Characterization of copolymers of polycarbonate and polydimethylsiloxane by 2D chromatographic separation,MALDI-TOF mass spectrometry,and FTIR spectroscopy

Abstract

The structure and composition of polycarbonate polydimethylsiloxane copolymer (PC-co-PDMS) was investigated by applying various analytical approaches including chromatographic separation methods, spectrometric, and spectroscopic detection techniques. In particular, size exclusion chromatography (SEC) and liquid adsorption chromatography operating at different conditions (e.g. using gradient solvent systems) were used to achieve separations according to molar mass and functionality distribution. The coupling of both techniques resulted in fingerprint two-dimensional plots, which could be used to easily compare different copolymer batches. Matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrometry was applied for structural investigations. The different ionization behavior of both comonomers, however, strongly limited the applicability of this technique. In contrast to that, Fourier-transform Infrared (FTIR) spectroscopy could be used to quantify the amount of PDMS in the copolymer at different points in the chromatogram. The resulting methodology was capable of distinguishing PC-co-PDMS copolymer from PC homopolymer chains present in the material.     

Integration of ion-exchange chromatography fractionation with reversed-phase liquid chromatography-atmospheric pressure chemical ionization mass spectrometer and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for isolation and identification of compounds in Psoralea corylifolia

An approach for the separation and identification of components in a traditional Chinese medicine Psoralea corylifolia was developed. Ion-exchange chromatography (IEC) was applied for the fractionation of P. corylifolia extract, and then followed by concentration of all the fractions with rotary vacuum evaporator. Each of the enriched fractions was then further separated on an ODS column with detection of UV absorbance and atmospheric pressure chemical ionization mass spectrometer (APCI/MS), respectively, and also analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF/MS) with matrix of oxidized carbon nanotubes. Totally more than 188 components in P. corylifolia extract were detected with this integrated approach, and 12 of them were preliminary identified according to their UV spectra and mass spectra performed by APCI/MS and MALDI-TOF/MS. The obtained analytical results not only demonstrated the powerful resolution of integration IEC fractionation with reversed-phase liquid chromatography (RPLC)-APCI/MS and MALDI-TOF/MS for analysis of compounds in a complex sample, but also exhibited the superiority of APCI/MS and MALDI-TOF/MS for identification of low-mass compounds, such as for study of traditional Chinese medicines (TCMs) and metabolome.     

反相高效液相色谱/基质辅助激光解吸电离飞行时间质谱 分离鉴定螺蛳血管紧张素转换酶抑制肽

运用反相高效液相色谱(RP-HPLC)对酶解螺蛳腹足肌得到的血管紧张素转换酶(ACE)抑制肽进行两步分离提纯,第一步主要得到8个组分;选取其中活性最高的组分进一步分离,得到2个组分,其中活性较高组分的ACE半抑制浓度为43.5 μmol/L,基本为单一肽组分。对提纯的组分分别使用高效液相色谱/电喷雾离子质谱法(HPLC/ESI-MS)和基质辅助激光解吸电离飞行时间质谱法(MALDI-TOF MS)进行分析,同时结合氨基酸组成分析结果,最终得到的肽链一级结构为Lys-Glu-Ile-Trp(KEIW),符合已知的高活性ACE抑制肽的结构规律。经过对两种方法分析过程的比较,认为ESI-MS可以得到多方面的信息,但无法确定肽的序列;MALDI-TOF MS可以得到精确的二级质谱图(m/z精确至0.0001),从而可以得到确定的肽的序列。     

Characterization by mass spectrometry of an unknown polysiloxane sample used under uncontrolled medical conditions for cosmetic surgery

For a complete understanding of the raw material used for cosmetic surgery under uncontrolled medical conditions, an unknown sample of polydimethylsiloxanes has been investigated utilizing a combination of analytical techniques: pyrolysis/gas chromatography/mass spectrometry (Py/GC/MS), electrospray ionization (ESI)-MS, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF)MS, and liquid chromatography (LC)/MS. Among these techniques, the LC/APCI-MS coupling allowed the fastest and more effective analysis. In addition, the complexity of the mass spectra deduced from these LC/MS experiments was simplified compared to the mass spectra obtained by MALDI-TOF. In this work, we have demonstrated how the LC/APCI-MS coupling applied to polydimethylsiloxane samples permits the full characterization of samples where end groups of different nature can be present in very small quantities.     

基质辅助激光解吸电离飞行时间质谱技术分析三七和海兔神经连索内的皂甙组分

基质辅助激光解吸电离飞行时间(MALDI-TOF)质谱技术能高效解吸三七提取液(Panaxnotoginseng Extraction, PNE)中的混合皂甙分子为皂甙离子,并供质量分析器检测与分析.选用MALDI-TOF 质谱技术直接分析色谱纯皂甙样品的纯度,其检测灵敏度优于反相高效液相色谱法(RP-HPLC).优化提取中药三七(Panax notoginseng, PN)的混合皂甙, 选用MALDI-TOF质谱技术直接分析PNE中的皂甙种类和相对含量,发现PNE至少含有20种不同分子结构的皂甙组分,其中人参皂甙(Ginsenoside) Rg1和三七皂甙(Notoginsenoside)R1含量相对较高.选用薄板层析法(TLC)制备PNE中的R1皂甙.MALDI-TOF质谱技术研究蓝斑背肛海兔(Notarcus leachiicirrosus Stimpson, NLCS)神经连索内的超微量R1的组成与分布.建立PNE皂甙的指纹图谱,并适合于评价中药三七的品质和分析体内超微量皂甙的代谢过程与机理.     

Characterization of poly(2-oxazoline) homo- and copolymers by liquid chromatography at critical conditions

In this study liquid chromatography at critical conditions for poly(2-ethyl-2-oxazoline)s (PEtOx) has been performed for the first time in order to analyze functional PEtOx homopolymers and block copolymers. Besides the verification of the critical point of adsorption with two series of ester end group functionalized PEtOx homopolymers, to evaluate the effect of both the chain length dependence and the end group polarity, using a cyano column with a solvent combination of 2-propanol and water, also two-dimensional liquid chromatography (2D-LC) has been applied for a poly(2-oxazoline) block copolymer. The combined characterization techniques provided further information about the polymerization procedure with regard to the formation of side-products by separation of the block copolymer from the corresponding homopolymer impurities. In addition, hyphenation of LCCC with MALDI-TOF MS and ESI-Q-TOF tandem mass spectrometry verified the obtained results.     

Identification of polymer building blocks by Py–GC/MS and MALDI-TOF MS

The main goal of this work is to identify polyurethane (PU) building blocks by pyrolysis gas chromatography/mass spectrometry (Py–GC/MS) and matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). Toluene diisocyanate (TDI) and diphenylmethane diisocyanate (MDI) are widely used polymer building blocks. Py–GC/MS and MALDI-TOF MS were proved to be powerful methods to distinguish TDI-PU and MDI-PU according to the characteristic pyrolysis products and the different repeated units, respectively. In Py–GC/MS, the specific pyrolyzates are TDI for TDI-PU and MDI for MDI-PU. In MALDI-TOF MS, the weights of repeated units are 264?g/mol for TDI-PU and 340?g/mol for MDI-PU.     

STRUCTURAL CHARACTERIZATION OF POLY(ϵ-CAPROLACTONE) AND POLY(ϵ-CAPROLACTONE-b-ISOBUTYLENE-b-ϵ-CAPROLACTONE) BLOCK COPOLYMERS BY MALDI-TOF MASS SPECTROMETRY

Poly(?-caprolactone)(PC1) and PC1-polyisobutylene-PC1 (PC1-PIB-PC1) block copolymers were synthesized in anhydrous toluene by in situ conversion of 2-methyl-1-propanol (2M1P) and α,ω-dihydroxy PIB, respectively, to the corresponding aluminum alkoxide by reaction with a stoichiometric amount of triethylaluminum (TEA) followed by the addition of e-caprolactone. Structural characterization of 2M1P-initiated PCl by gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry (MS) demonstrated the presence of cyclic oligomers, which are produced by intramolecular transesterification reactions that become significant at high monomer conversions. A minor fraction of chains bearing carboxylic acid termini was also observed in the MALDI-TOF mass spectrum; however, carboxylic acid chain ends could not be detected by ¹³C NMR analysis. Thus, the likely origin of the carboxylic acid termini is fragmentation of the initiator residue from the chain end during MALDI-TOF analysis. For PCl-PIB-PCl block copolymers, two different α,ω-telechelic PIB diols were used as macroinitiators, one derived from allyl and one from isopropenyl terminated PIB. Terminal olefins were converted to primary alcohols via regioselective hydroboration followed by alkaline hydrogen peroxide oxidation. After reaction with ?-caprolactone, formation of a block copolymer was evidenced by a shift of the polymer peak to lower elution volume in GPC analysis. Block copolymers possessed molecular weight distributions ≤1.4, and molecular weights of the PCl blocks calculated from GPC were in excellent agreement with those found using MALDI-TOF MS. Structural analysis indicated that the PCl end blocks were severed from the crude block copolymer during MS analysis, for both allyl- and isopropenyl-derived materials. For allyl-derived materials the PCl blocks were found to predominantly carry a C₂ residue at the point of detachment of the PIB block; however, the isopropenyl-derived block copolymers showed a complex mixture of different residues suggesting a complex fragmentation mechanism during loss of the PIB block.     

Application of an integrated matrix-assisted laser desorption/ionization time-of-flight, electrospray ionization mass spectrometry and tandem mass spectrometry approach to characterizing complex polyol mixtures

Polyols are being used in a wide range of industrial applications including surfactants and precursors for grafted polymers. The characterization of polyols is of significance in correlating compositions and structures with their properties. We illustrate two real world examples where traditional analytical methods including GPC and NMR failed to reveal compositional differences, but the combination of matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF), electrospray ionization mass spectrometry (ESI MS), and MS/MS can produce compositional information required for problem solving. The first example involves failure analysis of four ethylene oxide and propylene oxide (EO/PO) copolymer products. The results from the mass spectrometry analysis unequivocally demonstrate that one of the samples has a small variation in copolymer composition, leading to its abnormal activity. The second example is in the area of deformulation of complex polyol mixtures. Two samples displaying similar properties and activities were found to be two different polyol blends. One of the samples is a more cost-effective product. These examples demonstrate that MALDI, ESI MS, and MS/MS should be seriously considered as an integrated component of an overall polyol characterization program in product failure analysis and deformulation.     

MALDI-TOF characterization of macromonomers

Methacryloyl endfunctionalized oligostyrene macromonomers were characterized by matrix assisted laser desorption ionization/time of flight (MALDI-TOF) spectroscopy and by isocratic and gradient high performance liquid chromatography (HPLC). The molar mass distribution derived by the different techniques coincide for the investigated oligomers. Mixing experiments revealed that the MALDI-TOF peak areas do not necessarily represent the mixing ratio of the components. Combination of gradient HPLC and MALDI-TOF has resolved the chemical composition of the coupling products formed by reaction of the living anion with oxygen.     

N-terminal H3/D3-acetylation for improved high-throughput peptide sequencing by matrix-assisted laser desorption/ionization mass spectrometry with a time-of-flight/time-of-flight analyzer

A novel method for peptide sequencing by matrix-assisted laser desorption/ionization mass spectrometry with a time-of-flight/time-of-flight analyzer (MALDI-TOF/TOF) is presented. A stable isotope label introduced in the peptide N-terminus by derivatization, using a 1:1 mixture of acetic anhydride and deuterated acetic anhydride, allows for easy and unambiguous identification of ions belonging either to the N- or the C-terminal ion series in the product ion spectrum, making sequence assignment significantly simplified. The good performance of this technique was shown by successful sequencing of the contents of several peptide maps. A similar approach was recently applied to nanoelectrospray ionization (nanoESI) and nano-liquid chromatography/tandem mass spectrometry (LC/MS/MS). The MALDI-TOF/TOF technique allows for fast, direct sequencing of modified peptides in proteomics samples, and is complementary to the nanoESI and nanoLC/MS/MS approaches.     

Structural characterization of mesquite (Prosopis velutina) gum and its fractions

Structural and physicochemical characteristics of mesquite gum (from Prosopis velutina) were investigated using FT-IR spectroscopic, mass spectrometric and chromatographic methods. Four fractions (F-I, F-IIa, F-IIb and F-III) were isolated by hydrophobic interaction chromatography. The samples were characterized and analyzed for their monosaccharide and oligomers composition by high performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). L-Arabinose (L-Ara) and D-galactose (D-Gal) were found as the main carbohydrate constituent residues in the polysaccharides from mesquite gum and their ratio (L-Ara/D-Gal) varied within the range 2.54 to 3.06 among the various fractions. Small amounts of D-glucose (D-Glc), D-mannose (D-Man) and D-xylose (D-Xyl) were also detected, particularly in Fractions IIa, IIb and III. Infrared spectroscopy identified polysaccharides and protein in all the samples. Data from mass spectrometry (MALDI-TOF MS) was consistent with the idea that the structure corresponding to the periphereal chains of Fraction I is predominantly a chain of pentoses attached to uronic acid.     

Discrimination of Thermoplastic Polyesters by MALDI-TOF MS and Py-GC/MS

The aim of this work is to discriminate thermoplastic polyester-polyethylene terephthalate (PET), polybutylene terephthalate (PBT), and polytrimethylene terephthalate (PTT), which cannot be easily identified by many methods. Both matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) were applied to identify these polyesters owing to their analytical ability to determining polymers' chemical structure. The three thermoplastic polyesters can be easily distinguished by MALDI-TOF MS according to their different repeated units. Py-GC/MS was used to analyze their specific pyrolyzates. The three polyesters can be identified through their characteristic pyrolysis products as well.     

用MALDI-TOFMS观察适配子与炭疽芽孢的结合反应

用基质辅助激光解吸电离－飞行时间质谱（MALDI－TOF MS）观察炭疽芽孢适配子与炭疽芽孢结合反应，将SELEX（system evolution of ligands by exponential enrichment）技术筛选获得的一个炭疽芽孢适配子F77和第18轮的混合适配子以及兔抗炭疽芽孢抗体分别与炭疽芽孢结合反应后，用MALDI－TOF MS指纹图变化来研究这些分子与芽孢的结合情况，结果显示抗体、单体和混合适配子与芽孢结合反应后约在m/z1800处产生的质谱峰强度与芽孢对照相比明显降低；用MALDI－TOF MS质谱图变化可以推测适配子与芽孢的结合反应，该试验中观察到的结合情况与作者以前的研究结果一致。     

Subunit Characteristics of Pig Pancreas Ferritin Revealed by MALDI-TOF MS and RP-HPLC

Pig pancreas ferritin（PPF） was purified by ultra-centrifugation, ion-exchange chromatography, and native gradient polyacrylamide gel electrophoresis（PAGENG）. Sodium dodecyl sulfate（SDS）-PAGE indicates that PPF consists of two subunit types, namely, H（21000） and L（19000） subunits, and its core shows an average element composition of 1698 Fe3＋ and 179 phosphate molecules within the hollow shell, giving a 9.5：1 ratio of Fe3＋ to phosphate. An off line approach combining reversed-phase high-performance liquid chromatography（RP-HPLC） with matrix-assisted laser desorption ionization time of flight mass spectrometry（MALDI-TOF MS） made the decomposition of PPF shell into H and L subunits for the analysis of mass spectrometry（MS）, giving molecular weights of both H（21014.4） and L（18319.9） subunits. Both subunit types were further identified by an approach combining peptide mass fingerprint（PMF） with database search. A ratio of 1H to 2L subunits in PPF was determined by SDS-PAGE, RP-HPLC, and MALDI-TOF MS, respectively. It is well known that the non-covalent interaction of L-L or H-L subunits is stronger than that of H-H subunits in PPF, which may be further used to explain the unclear physiological function between H and L subunits in PPF.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry investigations of polystyrene and poly(methyl methacrylate) produced by monoacylphosphine oxide photoinitiation

The chain-end-group composition was determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses of low-molecular-weight polystyrene (PS) and poly(methyl methacrylate) (PMMA) produced by free-radical polymerization with a monoacylphosphine oxide, (2,4,6-trimethylbenzoyl) diphenylphosphine oxide (TPO), as a photoinitiator. Gel permeation chromatography (GPC) fractionation of the PS and PMMA samples with initial polydispersities of 1.81 and 2.81, respectively, yielded improved MALDI-TOF MS spectra. Spectral analyses of the PS fractions showed distributions attributable to PS having two diphenylphosphinyl ends and PS having one diphenylphosphinyl end and/or one 2,4,6-trimethylbenzoyl end, indicating that a combination of PS radicals with the highly reactive diphenylphosphine oxide group at one end of the chains was the predominant mode of termination. MALDI-TOF MS results for PMMA fractions provided evidence for termination primarily by disproportionation, but structure determination was confounded by the presence of isobaric peaks. Discernible peaks were obtained by MALDI-TOF MS analyses of GPC fractions of TPO-initiated poly(methyl-d₃ methacrylate-d₅), in which the major product was PMMA with a diphenylphosphinyl end group and an abstracted deuterium end group, whereas the minor combination product had two diphenylphosphinyl chain ends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2161–2171, 2007     

Structural analysis of lipid A from Escherichia coli O157:H7:K- using thin-layer chromatography and ion-trap mass spectrometry

Rapid separation and structural identification of lipid A from Escherichia coli were performed using thin-layer chromatography (TLC) and mass spectrometry (MS). After the resolved spot of the lipid A had been scraped from TLC plate, the sample was re-extracted from the removed powder with chloroform-methanol (2 : 1, v/v) and analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and electrospray ionization (ESI) ion-trap MS. For detailed structural characterization, multiple-stage mass analysis (MS(4)) of the major species in ESI-MS/MS provided important information about the series of fragment ions. The dominant fragment ions in each MS stage were produced from the loss of fatty acyl groups mainly driven by charge-remote processes, and this information about the fragment ions can be used to deduce the composition or the position of the fatty acid substituent in the lipid A. In contrast, MALDI-TOFMS indicated that fragmentation resulted from charge-driven processes. Molecular mass profiling and fragmentation analysis provides essential information for clarifying the detailed structure of the lipid A from E. coli O157:H7:K(-).     

Separation of polysorbates by liquid chromatography on a HILIC column and identification of peaks by MALDI-TOF MS

Polysorbates can be separated according to their functionality and architecture by liquid chromatography on a hydrophilic interaction chromatography (HILIC) column in acetone–water mobile phases containing 90–97% acetone. The different polymer homologous series are separated according to the number of terminal hydroxy groups and elute as narrow peaks. The hydrophilic part (ethoxylates of sorbitan, isosorbide, and poly(ethyleneglycol)) and amphiphilic funtionalites (ethoxylated mono-, di-, tri-, and tetraesters) were separated by HILIC mode of high-performance liquid chromatography (HPLC). All these separated functionaities are identified and confirmed by matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS). This combination of HPLC and MALDI-TOF MS has been proven to be an excellent tool for the characterization of heterogenous complex samples.     

Automated protein identification using atmospheric-pressure matrix-assisted laser desorption/ionization

Atmospheric-pressure matrix-assisted laser desorption/ionization (AP-MALDI) ion trap mass spectrometry (ITMS) has been evaluated for automated protein identification. By using signal averaging and long ion-injection times, protein identification limits in the 50-fmol range are achieved for standard protein digests. Data acquisition requires 7.5 min or less per sample and the MS/MS spectra files are automatically processed using the SEQUEST database searching algorithm. AP-MALDI-ITMS was compared with the widely used methods of microLC/MS/MS (ion trap) and automated MALDI-TOF peptide mass mapping. Sample throughput is 10-fold greater using AP-MALDI compared with microcapillary liquid chromatography/tandem mass spectrometry (microLC/MS/MS). The protein sequence coverage obtained from AP-MALDI-MS/MS spectra matched by SEQUEST is lower compared with microLC/MS/MS and MALDI-TOF mass mapping. However, by using the AP-MALDI full-scan peptide mass fingerprint spectrum, sequence coverage is increased. AP-MALDI-ITMS was applied for the analysis of Coomassie blue stained gels and was found to be a useful platform for rapid protein identification.