Interaction between polyelectrolyte gels and surfactants of opposite charge

Investigations dealing with fundamental aspects of the interaction between covalently cross-linked polyelectrolyte gels and oppositely charged surfactants are reviewed. For reference, a brief summary of results from recent studies of associative phase separation in linear polyelectrolyte/surfactant mixtures is also included. It is found that great progress has been made in several sub-areas since the first reports appeared in the early 1990's. The frequently observed surfactant-induced volume transition has been studied in detail. Its relation to associative phase separation in solutions and the important role of polyion-mediated micelle–micelle attractions have been clarified. Phase separation in gels, in particular core/shell structures, has been studied in great detail. The importance of network mediated elastic forces between two phases coexisting in the same gel has been demonstrated and some of their consequences have been clarified. Hydrophobic interactions between polyion and micelle have been found to have strong effects on both binding and swelling isotherms. The effect of salt, which has been found to sometimes disfavor, sometimes promote surfactant binding, is quite well understood. The microstructure of gels in the collapsed state has been studied in great detail and is often found to be highly ordered, resembling liquid crystalline phases common to surfactant/water systems. The kinetics of surfactant binding and the associated volume change has been investigated to some extent. Progress has been made for gels displaying phase separation during the volume transition.     

Ionization probability of the hydrogen atom suddenly released from confinement

The problem of the stability of a confined atom when it is extracted from the confining cavity has been investigated, modeled by a spherical hard wall potential. The ionization probability when the atom is released from confinement has been obtained. The dependence of the ionization probability on the confinement radius and on the quantum numbers of the initial confined state has been studied. The probability density function of the ionization energy of the ejected electron has been obtained for the different cases considered. The oscillatory structure of this distribution function, with a principal maximum located in the neighborhood of the energy of the initial state and minima very close to zero has been elucidated. The sudden approximation has been applied and the analytic continuation method has been used to calculate the different stationary states.     

Infra-red and electronic absorption spectra of 2-bromopyrimidine

The electronic absorption spectrum of 2-bromopyrimidine in the u.v. region has been recorded in vapour phase and in solution phase in different solvents. Only one system has been observed in vapour phase and it has been identified as π* ← n transition. In solution phase two systems have been identified. The system on the longer wavelength side has been identified as corresponding to the one observed in vapour phase while the other one has been assigned to a π* ← π transition. The infrared spectrum of this molecule has also been recorded and analysed. Help of these i.r. data has been taken to analyse the u.v. spectrum of 2-bromopyrimidine, considering the molecule as belonging to C_2υ point group.     

Synergism in the extraction of scandium

Synergism in the extraction of scandium by a mixture of di-2-ethylhexyl phosphoric acid and a β-diketone has been studied. The nature of the extracted species has been investigated. The effect of temperature on extraction has been studied and synergism has been explained on the basis of thermodynamic parameters of the extraction process.     

Enantiorecognition of profens by capillary electrophoresis using a novel chiral selector eremomycin

The evaluation of a macrocyclic glycopeptide antibiotic, eremomycin, as a chiral selector in capillary electrophoresis (CE) has been performed. The stability of eremomycin in solution and capillary electrolyte, as well as its optical and electrophoretic properties have been discussed. The effect of experimental parameters influencing the enantioseparation of several profens has been studied. Excellent enantioseparation of profens has been achieved and migration order has been validated. Comparison of enantioseparations of profens in CE by using eremomycin-mediated electrolytes and in HPLC with eremomycin immobilized on silica has revealed similar trends for both methods.     

超声幅照下ABS塑料表面的粗化研究

由于外层镀有金属的塑料制品兼有塑料及金属材料的优点,因而是一类具有广泛用途的新型复合材料。其中以金属化的ＡＢＳ塑料的应用最为广泛。＊＊Ｓ塑料金属化的方法很多,其中以电镀法最受重视ｌ‘］。为保证金属镀层与塑料表面具有良好结合力,使塑料表面形成四坑、微孔等均匀微观粗糙状态的粗化工艺是相当关键的步骤之一ｐ‘。现国内外广泛采用铬一硫酸混合液的化学粗化法,但该法对环境污染较大。随着环保要求的日益高涨,其它粗化法越来越受到人们的重视［’］。本文探索了利用超声波的空化效应来粗化ＡＢＳ塑料表面、为ＡＢＳ塑料的电…     

Selective Potentiometric Measurement of Physiologically Significant Thiols

The reaction of benzoquinone with reduced thiol species has been investigated using potentiometric techniques. The specificity of this reaction for thiol functionality has been briefly assessed and the nature of the electrode response has been elucidated. The system has been characterized in terms of selectivity, sensitivity and the efficacy of using the system for the quantification of thiol containing pharmaceuticals has been demonstrated. The simplicity of the detection methodology is shown to markedly contrast alternative thiol detection strategies. The transfer of the technology to a mass production format through the adoption of screen print electrode formats has been achieved and the efficacy of the approach demonstrated. Recovery experiments using captopril and penicillamine in tissue culture as a model analyte system were performed.     

Research of Fluorination Process of Rutile Concentrate

The brief review of industrial technologies of titanium-containing concentrates processing has been carried out. Drawbacks of the existing titanium manufacture schemes are shown and the necessity of the essentially new fluoride technologies development has been proved. The reactions proceeding during the fluorination of rutile concentrate with element fluoride are described in the given work. The thermodynamic research of the process has been carried using ASTRA software. Dependence of mass concentration change of titanium tetrafluoride has been investigated in products of reaction on the temperature of the process, and the choice of optimum excess of fluoride has been proved.     

Effect of the intercalated cation on the properties of poly(o-methylaniline)/maghnite clay nanocomposites

A detailed study about the synthesis, characterization and properties of poly(o-methylaniline)(PoMea)/maghnite nanocomposites has been performed. Changes in the characteristics of the nanocomposites, depending on the intercalated cation between the clay layers before the synthesis, have been observed. Intercalated morphology has been detected by TEM in nanocomposites containing copper-treated maghnite (Magh-Cu), while when maghnite treated with strong acids was used (Magh-H); an exfoliated material has been obtained. Also, remarkable differences in the properties of the polymers have been observed by TG-MS and FTIR, suggesting that the polymer produced with Magh-H has a higher degree of branching. The electrochemical behavior of the polymers extracted from the nanocomposites has been studied by cyclic voltammetry. Good electrochemical response has been observed for PoMea grown into Magh-Cu but not for the one polymerized into Magh-H.     

Radioimmunoassay of human placental lactogen

A sensitive and specific radioimmunossay procedure (RIA) has been developed for the measurement of Human Placental Lactogen (HPL). Pure HPL has been labelled with¹²⁵I and a specific activity of 100 μCi/μgm of HPL has been attained. Dextran-coated charcoal has been employed to separate the bound from the free hormone in radioimmuno-assay. The sensitivity of this technique has been found to be 0.2 ng of HPL. Intraassay and inter assay variations have been found to be less than 10%. This procedure has been adopted to establish the normal range of HPL in pregnant women at different periods of gestation, and to evaluate risk pregnancies.     

Effect of chemical structure and crystallinity on sorption,diffusion and chemical stability of polyurethaneacetals

The diffusion of water in non-isocyanate polyurethaneacetals (PUA) of various kinds and compositions has been studied. The direct relationship between the composition of polymers, their degree of crystallinity, morphology and diffusional characteristics has been demonstrated. It has been shown that by changing the polymer composition one can obtain hydrated polymer systems of every type, hydrophobic, hydrophilic and moderately hydrophilic. The kinetics of hydrolytic degradation of PUA in HCl solutions (pH = 0·1) between 20 and 75°C has been investigated. Hydrolysis of acetal bonds has been found to occur in the amorphous phase of a polymer sample, which is mostly formed by the fragments of urethane glycol.The influence of morphology on PUA diffusional characteristics and their stability to hydrolysis has been determined.It has been shown that the physico-chemical properties of PUA can be regulated without the introduction of new compounds.     

A mechanistic evaluation of the amperometric response of reduced thiols in quinone mediated systems

The specificity of the reaction of benzoquinone with reduced thiol species has been investigated and the nature of the amperometric electrode response elucidated. The analytical applicability of the methodology has been assessed and it has been shown that through appropriate selection of the redox properties of the indicating quinone, interference from other electroactive species can be minimised. A discrepancy in the reaction stoichiometry has however been found between the glutathione and cysteine quinone adducts and the implications in interpreting the resulting sensor response are rationalised. The adaptation of the approach to disposable, screen printed electrode assemblies has been investigated.     

Contactless Conductivity Detection in Capillary Electrophoresis: A Review

The popularity of contactless conductivity detection in capillary electrophoresis has been growing steadily over the last few years. Improvements have been made in the design of the detector in order to facilitate its handling, to allow easy incorporation into available instruments or to achieve higher sensitivity. The understanding of its fundamental working principles has been advanced and the detection approach has also been transferred to lab‐on‐chip devices. The range of applications has been extended greatly from the initial work on small inorganic ions to include organic species and biomolecules. Concurrent determination of cations and anions by dual injection from opposite ends has been demonstrated as well as sample introduction by using flow‐injection systems for easy automation of the process.     

C~6~0^3^-的Jahn-Teller变形、电子结构和光谱性质的理论研究

本文用INDO系列方法对C~6~0^3^-进行了几何构型优化, 得到D~2~h构型, 表明C~6~0^3^-确实发生了Jahn-Teller变形, 导致单键变短, 双键变长, 其额外负电荷和单电子主要分布在赤道附近。以此构型为基础, 计算其电子吸收光谱, 与实验值基本吻合, 在对光谱进行理论指认的同时, 讨论了光谱红移的原因。     

Hydrogen and higher shell contributions in Zn2+, Ni2+, and Co2+ aqueous solutions: an X-ray absorption fine structure and molecular dynamics study

A detailed investigation of the hydration structure of Zn2+, Ni2+, and Co2+ in water solutions has been carried out combining X-ray absorption fine structure (EXAFS) spectroscopy and Molecular Dynamics (MD) simulations. The first quantitative analysis of EXAFS from hydrogen atoms in 3d transition metal ions in aqueous solutions has been carried out and the ion-hydrogen interactions have been found to provide a detectable contribution to the EXAFS spectra. An accurate determination of the structural parameters associated with the first hydration shell has been performed and compared with previous experimental results. No evidence of significant contributions from the second hydration shell to the EXAFS signal has been found for these solutions, while the inclusion of the hydrogen signal has been found to be important in performing a quantitative analysis of the experimental data. The high-frequency contribution present in the EXAFS spectra has been found to be due to multiple scattering (MS) effects inside the ion-oxygen first coordination shell. MD has been used to generate three-body distribution functions from which a reliable analysis of the MS contributions to the EXAFS spectra of these systems has been carried out.     

Influence of the heating rate on the temperature profiles and on the conversion rate of powdery cellulose and pine sawdust

An experimental study of the thermal decomposition of powdered cellulose and pine sawdust has been performed. The influence of the heating rate on the temperature profiles in the sample and on the solid conversion rate has been studied. A mathematical model without adjustable parameters has been used to calculate the temperature at different points in the solid bed and the average total solid conversion. The experimental results have been compared with those calculated by the model. A good agreement has been obtained for sawdust. Some differences are observed for cellulose at high heating rates, and the influence of the thermal conductivity and the reaction heat on the results has been analysed.     

Vibrational and electronic absorption spectra of 4-chloro 2-methyl, 4-chloro 3-methyl and 6-chloro 3-methyl phenols

The infrared spectra of 4-Cl 2-Me, 4-Cl 3-Me and 6-Cl 3-Me phenols have been recorded. The vibrational spectrum has been analysed assuming that the molecules belong toC _s point group and a tentative assignment of the observed frequencies to various modes of vibration has been proposed. The near ultraviolet absorption spectrum of these compounds has also been recorded. Assuming the transition to be electronically allowed the strongest band on the longer wavelength side has been assigned as the (0, 0) band in each case. The spectrum has been analysed in terms of several excited state frequencies which have been correlated with the ground state frequencies observed in the infrared spectrum.     

Improvement of properties of silica‐filled styrene‐butadiene rubber composites through plasma surface modification of silica

The performance of plasma surface modified silica filler in styrene‐butadiene rubber (SBR) matrix has been analyzed. The conditions of plasma modification have been optimized by taking secant modulus as a standard parameter and the occurrence of the modification has been confirmed by surface area determination and Fourier transform infrared spectroscopy. The plasma‐modified surface of silica has been found to be composed of carbon–carbon double bonds and carbon–hydrogen bonds. Silane treatment also has been carried out on silica filler surface for a comparative assessment of its influence in the curing behavior and filler–rubber interaction. The cure reactions of all the rubber compounds have been found to be proceeded according to first‐order kinetics. A reduction in the cure reaction rate constant has been observed with the loading of unmodified and surface modified silica, emphasizing the cure deactivation of the matrix rubber by the silica filler. The filler dispersion, as revealed by scanning electron microscopy, has been found to be greatly improved by the plasma as well as silane treatment. The filler–rubber interaction has been found to be greatly improved by both surface treatments, but the best balance of mechanical properties has been observed with plasma surface modification only. Copyright © 2004 John Wiley & Sons, Ltd.     

Electron microtomography: A new method for studying the spatial structure of catalysts

The spatial arrangement of active component (Pt) particles on the surface of a support (Sibunit globule) has been studied by bright-field electron tomography. A tomographic attachment for a standard specimen holder and tomographic grids have been designed. The tomographic procedure has been refined, and adequate tilt series alignment and tomographic reconstruction algorithms have been chosen. The 3D distribution of the active component in the catalyst grain has been studied: particles hidden in micropores have been directly observed, and the size of the pores connecting internal cavities with the exterior has been estimated.     

MNDO study of reaction paths: Hydroboration of methyl cyanide

The hydroboration reaction of methyl cyanide has been investigated by the MNDO method. It has been shown that the reaction requires an activation energy of 25.3 kcal/mol and involves a four-center-like transition state in the rate-determining step. This reaction has been compared with the corresponding reaction of hydrogen cyanide, and the effect of methyl substitution on the reaction has been discussed. The charge-transfer effects accompanying the reaction have also been studied.