Unified design of wavelength-independent deep-etched fused-silica gratings

We present a unified design of wavelength-independent deep-etched fused-silica gratings as polarizing beam splitters and polarization-independent two-port beam splitters by using the simplified modal method. By defining unified grating parameters as the ratio of incident wavelength to grating period and the ratio of groove depth to grating period, unified grating structures are found to be approximately wavelength-independent, which is based on the modal view of the accumulated phase difference of two excited propagating grating modes. Diffraction efficiencies given by the rigorous coupled-wave analysis (RCWA) verified this unified design at the wavelength of 1064 nm. It should be noted that this unified design of wavelength-independent gratings is an analytic result, which is impossible to be derived with the well-known numerical RCWA. Modal method is powerful and presents a clear physical picture for us to obtain this unified design. Therefore, this unified design can be used as a general guideline for designing deep-etched fused-silica gratings as beam splitters for practical applications from ultraviolet to near infrared.     

Design of novel laser cavity with diffractive phase elements

A new method based on the general theory of amplitude-phase retrieval is proposed for designing the diffractive phase elements (DPEs) used in the laser cavity that can produce the desired mode with the specified shape of beam. Simulation results show that the laser cavity with the designed DPEs can successfully generate uniform square and triangle ring patterns. The loss of these fundamental modes is negligibly small and the separation of adjacent transverse modes is large enough to discriminate the fundamental mode from the higher-order modes.     

Self-error-rejecting photonic qubit transmission in polarization-spatial modes with linear optical elements

We present an original self-error-rejecting photonic qubit transmission scheme for both the polarization and spatial states of photon systems transmitted over collective noise channels. In our scheme, we use simple linear-optical elements, including half-wave plates, 50:50 beam splitters, and polarization beam splitters, to convert spatial-polarization modes into different time bins. By using postselection in different time bins, the success probability of obtaining the uncorrupted states approaches 1/4 for single-photon transmission, which is not influenced by the coefficients of noisy channels. Our self-error-rejecting transmission scheme can be generalized to hyperentangled n-photon systems and is useful in practical high-capacity quantum communications with photon systems in two degrees of freedom.     

Diffractive phase element for shrinking focal spot diameter: Design, fabrication, and application to laser beam lithography

A diffractive phase element (DPE) capable of shrinking the main-lobe of the focal spot of an incident beam has been developed. The DPE is expected to be used in laser beam lithography to improve the resolution. Special constraints, which force the focal spot to be small while permitting increase of the side-lobes, are introduced in the design of the DPE using an iterative method based on the Gerchberg-Saxton algorithm. Two kinds of DPEs are fabricated by a laser beam lithography system of our own composition and their performances are experimentally measured. The minimum line width obtained by the system is improved from 1.2 μm to 1.0 μm with the fabricated DPE. Focal depth of the focusing system is discussed.     

Double focus systems for holography

Some very simple, compact optical systems for holography of diffusely reflecting objects, using off-axis, double-focus elements as beam splitters, are described. These are free from disadvantages inherent in earlier systems of this type.     

Trapped-ion quantum simulator: experimental application to nonlinear interferometers

We show how an experimentally realized set of operations on a single trapped ion is sufficient to simulate a wide class of Hamiltonians of a spin-1/2 particle in an external potential. This system is also able to simulate other physical dynamics. As a demonstration, we simulate the action of two nth order nonlinear optical beam splitters comprising an interferometer sensitive to phase shift in one of the interferometer beam paths. The sensitivity in determining these phase shifts increases linearly with n, and the simulation demonstrates that the use of nonlinear beam splitters (n=2,3) enhances this sensitivity compared to the standard quantum limit imposed by a linear beam splitter (n=1).     

Depth-enhanced integral imaging by use of optical path control

The image depth of integral imaging is enhanced by doubling the number of central depth planes by use of optical path control. To accomplish this, the optical path lengths are changed by controlling whether reflections occur behind the lens array. We propose three schemes that use mirrors, a combination of beam splitters and polarizers, and polarization beam splitters, respectively. In experiments we implement the systems that are completely electronically controllable, are compact, and provide two central depth planes with 50.4-mm separation.     

Quantum key distribution based on phase encoding and polarization measurement

A one-way quantum key distribution scheme based on intrinsically stable Faraday-mirror-type Michelson interferometers with four-port polarizing beam splitters has been demonstrated that can compensate for birefringence effects automatically. The encoding is performed with phase modulators, but decoding is accomplished through measurement of the polarization state of Bob's photons. An extinction ratio of about 30 dB was maintained for several hours over 50 km of fiber at 1310 nm without any adjustment to the setup, which shows its good potential for practical systems.     

Quantum dynamics of strongly interacting boson systems: atomic beam splitters and coupled Bose-Einstein condensates

An effective boson Hamiltonian applicable to atomic beam splitters, coupled Bose-Einstein condensates, and optical lattices can be made exactly solvable by including all n-body interactions. The model can include an arbitrary number of boson components. In the strong interaction limit the model becomes a quantum phase model, which also describes a tight-binding lattice particle. Through exact results for dynamic correlation functions, it is shown how the previous weak interaction dynamics of these systems are extended to strong interactions, now becoming relevant in the experiments. The effect of the number of boson components is also analyzed.     

13.9 nm马赫贞德干涉仪用软X射线分束镜研究

 介绍了13.9 nm马赫贞德干涉仪用软X射线分束镜的设计、制备与性能检测。基于分束镜反射率和透过率乘积最大的评价标准,设计了13.9 nm软X射线激光干涉实验用多层膜分束镜。采用磁控溅射方法在有效面积为10 mm×10 mm、厚度为100 nm的Si3N4基底上镀制了Mo/Si多层膜,制成了多层膜分束镜。利用X射线掠入射衍射的方法测量了Mo/Si多层膜的周期。用扩束He-Ne激光束进行的投影成像方法定性分析了分束镜的面形精度,利用光学轮廓仪完成了分束镜面形精确测量。利用北京同步辐射装置测量了分束镜反射率和透射率,在13.9 nm处,分束镜反射率和透过率乘积达4%。使用多层膜分束镜构建了软X射线马赫贞德干涉仪,并应用于13.9 nm软X射线激光干涉实验中,获得了清晰的含有C8H8等离子体电子密度信息的动态干涉条纹。     

红外探测装置中光谱分光镜的设计与制备

在红外探测装置中,光谱分光镜是用来把3 μm～5 μm和8 μm～12 μm 2个波段的光谱分开的零件.介绍了一种在通用镀膜机上制备光谱分光镜的新工艺.在该膜系的设计过程中,把Willey公式引入到对其平均透过率最高值进行估算的过程中,同时针对国产镀膜机控制精度不高的特点,尽量使用规整膜层进行设计.为了进一步提高8 μm～12 μm波段的透过率,在膜系的最外侧引进了一层自行配制的低折射率氟化物材料,制备出了符合技术指标的红外光谱分光镜.     

Design of a ‘self-nulling’ beam combiner needing no external phase inversion

The complex optics of planned space-based nulling interferometers intended to search for exosolar planets will be simplified substantially if the modified Mach-Zehnder beam combiner is used in a novel fashion, extracting the null from ports traditionally used as bright outputs. This approach entirely eliminates the need for special phase-flipping optics, exploiting instead the broad-band phase shifts intrinsic to the beam splitters themselves. The theory of this ‘self-nulling’ approach is presented, and specifications are given for its use with and without adaptive nulling.     

Design of switches and beam splitters by use of chaotic cavities

We propose the construction of electromagnetic (or electronic) switches and beam splitters by use of chaotic two-dimensional multiport waveguides. A prototype two-port waveguide is locally deformed to produce a ternary incomplete horseshoe characteristic of mixed phase space (chaotic regions surrounding islands of stability where motion is regular). Owing to tunneling to the phase-space stability islands, quasi-bound states (QBS) appear. Then we attach transversal ports to the waveguide in the deformation region in positions where the phase-space structure is only slightly perturbed. We show how QBS can be guided out of the waveguide through the attached transversal ports,giving rise to frequency-selective switches and beam splitters.     

All-fiber optical gyroscopes on orthogonal polarizations

The expressions for the nonreciprocal phase at the output of a fiber ring interferometer (FRI) related to polarization phenomena are obtained in the general form. These expressions are used to analyze two systems of the FRIs on anisotropic elements without polarizer with one and two beam splitters with allowance for their phase anisotropy and losses. We formulate the requirements on the elements of circuits and their adjustment, which lead to minimization of the nonreciprocal polarization phase due to the single-loop realization of two independent orthogonal gyroscopic channels whose signals are added at the output. This allows us to use the above simple circuits for creating moderate-accuracy fiber gyroscopes. Institute of Applied Physics of the Russian Academy of Sciences, Nizhny Novgorod, Russia. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 41, No. 11, pp. 1448–1460, November, 1998.     

硅光子晶体TE模式光下路分束器设计

设计了基于自准直效应的硅光子晶体TE模式13和12光下路分束器。13光下路分束器由4个分束镜组成,而12下路分束器由3个分束镜和1个反射镜组成。利用多光束干涉原理推导出光下路分束器各个出口的透射谱理论公式。通过选择合适的分束镜,可以得到不同分束比例的光下路分束器。对于13光下路分束器,设计了1∶1∶1和1∶2∶3两种分束比例;对于12光下路分束器,设计了1∶1和1∶2两种分束比例。再利用时域有限差分软件数值模拟了透射谱,其结果与理论设计一致。当下路波长为1550 nm时,13和12两种光下路分束器的大小均约为10 m 10 m,自由光谱区为36 nm,覆盖了整个光通信C波段。     

Single-shot measurement of quantum optical phase

Although the canonical phase of light, which is defined as the complement of photon number, has been described theoretically by a variety of distinct approaches, there have been no methods proposed for its measurement. Indeed doubts have been expressed about whether or not it is measurable. Here we show how it is possible, at least in principle, to perform a single-shot measurement of the canonical phase using beam splitters, mirrors, phase shifters, and photodetectors.     

Multipartite Entanglement Preparation and Quantum Communication with Atomic Ensembles

We propose an experimentally feasible scheme to generate Greenberger-Horne-Zeilinger type of maximal entanglement among three atomic ensembles, and show one of the applications, controlled secure direct communication. The scheme involves laser manipulation of atomic ensembles, quarter- and half-wave plates, beam splitters, polarizing beam splitters and single-photon detectors, which are within the reach of current experimental technology.     

用于共孔径相干合成的衍射光学元件设计

分析了衍射光学元件实现共孔径相干合成的物理过程,建立了基于衍射光学元件的共孔径相干合成数学模型,推导了合成光束复振幅与入射光束和衍射光学元件相位分布之间的关系。提出用合成光束强度分布的均匀性作为评价函数的优化方法,获得了一维衍射合束器的相位分布。与文献报道的衍射光学元件分束器相比,可获得更高的合成效率。采用模拟退火算法结合随机并行梯度下降算法优化合束器设计,提高了计算效率,获得了多束衍射合束器的相位分布和合成效率。分析了单子束失效及合束器像差对合成效率的影响,结果表明:随着合束数量的增加,单子束失效对合成效率的影响逐渐减小;若使合成效率退化小于5%,衍射光学元件的波像差均方根值应控制在λ/28以内。     

Two-photon path-entangled states in multimode waveguides

We experimentally show that two-photon path-entangled states can be coherently manipulated by multimode interference in multimode waveguides. By measuring the output two-photon spatial correlation function versus the phase of the input state, we show that multimode waveguides perform as nearly ideal multiport beam splitters at the quantum level, creating a large variety of entangled and separable multipath two-photon states.     

Design and fabrication of high-efficiency photonic crystal power beam splitters

Efficient beam splitters in a planar photonic crystal waveguide with corrugated terminators were designed, fabricated, and characterized. Experimental results showed that these beam splitters have high splitting efficiency and power intensity in the propagation direction, an achievement made possible through a design method employing a genetic algorithm-based optimization method. High-efficiency power beam splitters are useful components in integrated optics, and the design implemented here is particularly suited for integration with other optical components.