Isoelectric points of plasma‐modified and aged silicon oxynitride surfaces measured using contact angle titrations

Acid‐base properties of metal oxides and polymers can control adhesion properties between materials, electrical properties, the physical structure of the material and gas adsorption behavior. To determine the relationships between surface isoelectric point, chemical composition and aging effects, plasma‐surface treatment of amorphous silicon oxynitride (SiO_xN_y) substrates was explored using Ar, H₂O vapor, and NH₃ inductively coupled rf plasmas. Overall, the Ar plasma treatment resulted in nonpermanent changes to the surface properties, whereas the H₂O and NH₃ plasmas introduced permanent chemical changes to the SiO_xN_y surfaces. In particular, the H₂O plasma treatments resulted in formation of a more ordered SiO₂ surface, whereas the NH₃ plasma created a nitrogen‐rich surface. The trends in isoelectric point and chemical changes upon aging for one month suggest that contact angle and composition are closely related, whereas the relationship between IEP and composition is not as directly correlated. Copyright © 2010 John Wiley & Sons, Ltd.     

Behavior and surface energies of polybenzoxazines formed by polymerization with argon,oxygen, and hydrogen plasmas

Polybenzoxazine (PBZZ) thin films can be fabricated by the plasma‐polymerization technique with, as the energy source, plasmas of argon, oxygen, or hydrogen atoms and ions. When benzoxazine (BZZ) films are polymerized through the use of high‐energy argon atoms, electronegative oxygen atoms, or excited hydrogen atoms, the PBZZ films that form possess different properties and morphologies in their surfaces. High‐energy argon atoms provide a thermodynamic factor to initiate the ring‐opening polymerization of BZZ and result in the polymer surface having a grid‐like structure. The ring‐opening polymerization of the BZZ film that is initiated by cationic species such as oxygen atoms in plasma, is propagated around nodule structures to form the PBZZ. The excited hydrogen atom plasma initiates both polymerization and decomposition reactions simultaneously in the BZZ film and results in the formation of a porous structure on the PBZZ surface. We evaluated the surface energies of the PBZZ films polymerized by the action of these three plasmas by measuring the contact angles of diiodomethane and water droplets. The surface roughness of the films range from 0.5 to 26 nm, depending on the type of carrier gas and the plasma‐polymerization time. By estimating changes in thickness, we found that the PBZZ film synthesized by the oxygen plasma‐polymerization process undergoes the slowest rate of etching in CF₄ plasma. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4063–4074, 2004     

Surface characterization of plasma‐modified poly(ethylene terephthalate) film surfaces

Poly(ethylene terephthalate) (PET) film surfaces were modified by argon (Ar), oxygen (O₂), hydrogen (H₂), nitrogen (N₂), and ammonia (NH₃) plasmas, and the plasma‐modified PET surfaces were investigated with scanning probe microscopy, contact‐angle measurements, and X‐ray photoelectron spectroscopy to characterize the surfaces. The exposure of the PET film surfaces to the plasmas led to the etching process on the surfaces and to changes in the topography of the surfaces. The etching rate and surface roughness were closely related to what kind of plasma was used and how high the radio frequency (RF) power was that was input into the plasmas. The etching rate was in the order of O₂ plasma > H₂ plasma > N₂ plasma > Ar plasma > NH₃ plasma, and the surface roughness was in the order of NH₃ plasma > N₂ plasma > H₂ plasma > Ar plasma > O₂ plasma. Heavy etching reactions did not always lead to large increases in the surface roughness. The plasmas also led to changes in the surface properties of the PET surfaces from hydrophobic to hydrophilic; and the contact angle of water on the surfaces decreased. Modification reactions occurring on the PET surfaces depended on what plasma had been used for the modification. The O₂, Ar, H₂, and N₂ plasmas modified mainly CH₂ or phenyl rings rather than ester groups in the PET polymer chains to form C? O groups. On the other hand, the NH₃ plasma modified ester groups to form C? O groups. Aging effects of the plasma‐modified PET film surfaces continued as long as 15 days after the modification was finished. The aging effects were related to the movement of C?O groups in ester residues toward the topmost layer and to the movement of C? O groups away from the topmost layer. Such movement of the C?O groups could occur within at least 3 nm from the surface. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3727–3740, 2004     

Coatings with thermally switchable surface energy produced from poly(ethylene oxide)-poly(dimethylsiloxane) block copolymer films

This work explores coatings with thermally switchable wetting behavior, based on block copolymers that possess both hydrophilic and hydrophobic segments. The amphiphilic block copolymers were synthesized by coupling allyl-ended poly(ethylene oxide) (PEO) and hydride-ended poly(dimethylsiloxane) (PDMS) oligomers via a Pt catalyst. One near-symmetric diblock possessed an order-disorder transition temperature (T_ODT) of 64 °C. When cooled through T_ODT in ambient air, the PDMS domains wet the film's surface, producing a hydrophobic coating with a water contact angle (CA) = 90°. However, when cooled in humidified air, hydrophilic PEO domains form at the surface, yielding CA = 30–40°. The coatings can be reversibly switched between the two states by reheating above T_ODT, in the appropriate environment, and then cooling, rapidly generating the desired room-temperature surface wettability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 135–140     

Surface characterization and properties of plasma‐modified cyclic olefin copolymer/layered silicate nanocomposites

In this study, cyclic olefin copolymer (COC)/layered silicate nanocomposites (CLSNs) were prepared by the intercalation of COC polymer into organically‐modified layered silicate through the solution mixing process. Both X‐ray diffraction data and transmission electron microscopy images of CLSNs indicate most of the swellable silicate layers were disorderedly intercalated into the COC matrix. The effect of layered silicate on the mechanical and barrier properties of the fabricated nanocomposites shows significant improvements in the storage modulus and water permeability when compared with that of neat COC matrix. Surfaces of COC and CLSN films were modified by a mixture of oxygen (O₂) and nitrogen (N₂) plasmas with various treated times, system pressures, and radio frequency (RF) powers. The surfaces of plasma‐modified COC and CLSN were investigated using scanning probe microscopy and contact‐angle measurements. The exposure of the COC and CLSN film to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new functional groups onto polymer surfaces to change the topology of COC film surfaces. The surface roughness was closely related to how high and how long the RF power was input into the system. The plasmas also led to changes in the surface properties of the CLSN surfaces from hydrophobic to hydrophilic; and the contact angle of water on the surface decreases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2745–2753, 2005     

Oligomer formation in the emulsifier‐free emulsion polymerization of styrene

The formation of oligomers in emulsifier‐free emulsion polymerization of styrene was characterized by means of gel permeation chromatography and surface tension measurements. GPC analysis showed incessant oligomer formation throughout the emulsion polymerization process. Oligomers spanned a molecular weight range of 200–1,500, have an M̄_w of 800–900, an M̄_n of 600–800 and a polydispersity index of 1.3. On average, the oligomers contain 4 to 6 styrene units. UV detection could not be utilized to acquire the weight ratio of oligomers to polymers without correction. Combination was the major mode of termination of free radicals in the aqueous phase, but disproportionation was not negligible: for every three‐combination reactions there was about 1 disproportionation. Surface tension measurements showed that oligomers minimized the surface tension of the latex at about 50 min reaction to only 30 mN/m. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1323–1336, 2000     

Structured multistimuli‐responsive functional polymer surfaces obtained by interfacial diffusion of amphiphilic block copolymers

Herein, we report the preparation of structured multistimuli‐responsive surfaces able to change reversibly both their chemical composition depending on the environment and their surface behavior by varying either/both the pH or/and the temperature. For that purpose, we took advantage of the surface segregation in homopolymer/diblock copolymer blends, composed of either polystyrene‐block‐poly(N,N′‐dimethylaminoethylmethacrylate) (PS‐b‐PDMAEMA) or polystyrene‐block‐poly (N,N′‐diethylaminoethylmethacrylate) (PS‐b‐PDEAEMA) and high molecular weight polystyrene used as a matrix. The variations of the surface composition as a function of the environment of exposure (air or water vapor) was investigated were investigated by XPS and contact angle measurements. The water‐annealed surfaces contain PDMAEMA or PDEAEMA at the surface and are additionally able to respond both to pH and temperature as demonstrated by the Wilhelmy technique. Both PDMAEMA and PDEAEMA can switch from a hydrophilic state to a collapsed hydrophobic state increasing the temperature above the LCST. More interestingly, as a result of the microphase separation of the block copolymers at the interface, the surfaces of the blends exhibit structuration. Thus, either micellar structures or “donut‐like” morphologies were obtained by using THF or toluene, respectively, as solvent. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1952–1961, 2010     

Synthesis,photophysics, theoretical modeling,and electroluminescence of novel 2,7‐carbazole‐based conjugated polymers with sterically hindered structures

2,7‐dibromo‐N‐hexylcarbazole is successfully synthesized in three steps with an overall 37% yield. Novel 2,7‐carbazole‐based sterically hindered conjugated polymers are further synthesized. In the backbone structure of polymer P1 , alkylated bithiophene moiety is β‐substituted with dodecyl chains on both thiophene rings, adopting the tail‐to‐tail configuration. While for polymers P2 and P3 , partially planarized thieno[3,2‐b]thiophene moiety ( P2 ) and β‐pentyl substituted thieno[3,2‐b]thiophene ( P3 ) are incorporated. All polymers demonstrate efficient blue‐to‐green light emission, good thermal stability (T_d ≥ 379 °C), and high glass transition temperatures (T_g = 118 °C). The optical and electronic properties of the resulted polymers are tuned by the incorporated alkyl chains. For instance, the incorporation of β‐pentyl group in thieno[3,2‐b]thiophene moiety endows P3 with blue‐shifted photophysical spectra, reduced fluorescence quantum yield and larger band gap in comparison with P2 . The steric effect of incorporated alkyl chains is further illustrated by geometry optimization of three model oligomers (analogues to the repetition units of P1–P3 ) using density functional theory. Sterically hindered polymers P1 and P2 exhibit high charge transport ability and moderate electroluminescent properties in primarily tested single‐layer light‐emitting diodes (configuration: ITO/PEDOT:PSS/Polymer/Ca/Ag). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7725–7738, 2008     

Surface characterization and barrier properties of plasma‐modified polyethersulfone/layered silicate nanocomposites

This study describes the preparation of polyethersulfone (PES)/layered silicate nanocomposites (PLSNs) by mixing PES polymer chain into organically‐modified layered silicate in 1‐methyl‐2‐pyrrolidinone (NMP) solution. Both X‐ray diffraction data and transmission electron microscopy images of PLSNs indicate that the silicate layers were almost exfoliated and randomly distributed into the PES matrix. The mechanical and barrier properties of PLSNs show remarkable enhancement in the storage modulus and water/oxygen permeability when compared with that of neat PES matrix. Surfaces modification of PES and PLSN films with various treated times, system pressures, and radio frequency (RF) powers were performed using a mixture of oxygen (O₂) and nitrogen (N₂) plasmas. The topographical and physical properties of plasma‐modified PES and PLSN surfaces were investigated using scanning probe microscopy (SPM), contact‐angle measurements, and X‐ray photoelectron spectroscopy (XPS). These results indicate that the surface roughness of PLSNs with the same condition of plasma modification is lower than that of neat PES matrix and is probably due to the increase of stiffness with the presence of inorganic layered silicates in PES matrix. The surface properties of the PES and PLSNs are also changed from hydrophobic to hydrophilic. The XPS spectra suggest that the exposure of the PES and PLSNs to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new oxygen‐ and nitrogen‐containing functional groups onto polymer surfaces to change their surface properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3185–3194, 2006     

Synthesis of hyperbranched polymers with precise conjugation length

A set of AB₂ type monodisperse conjugated oligomers carrying two bromo functional groups and one boronic ester functional group were prepared by iterative deprotection and Sonogashira cross‐coupling reactions. Suzuki polycondensation of these AB₂ type monodisperse oligomers afforded hyperbranched polymers. The hyperbranched conjugated polymers we prepared possess not only precisely controlled conjugation length like monodisperse conjugated oligomers but also the structural feature of hyperbranched polymers. Optical property investigation demonstrated that the maximum absorption and emission wavelength red‐shifted along with the increasing of the conjugation length between the two branching points and the hyperbranched structure could effectively reduce the aggregation of the conjugated polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1084–1092, 2007     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Alternating polyester/fluoroalkene copolymers: Combining high hydrophobicity with degradability

2‐Methylene‐1,3‐dioxepane (MDO) was copolymerized with fluoroalkenes (R_fCH?CH₂) using azobis(isobutyronitrile) AIBN as an initiator. NMR spectroscopy confirmed that the obtained polymers are effectively alternating copolymers of caprolactone and fluoroalkene. Angle resolved XPS of copolymer films revealed that the outer layers have higher CF_x:COO ratio relative to the subsurface, indicating that the perfluoroalkyl tails segregate to the air‐side, thereby presenting a hydrophobic surface with water contact angle as high as 130°. Blends of this material with polycaprolactone and polycarbonate polymers also form hydrophobic films. In the presence of trifluoroacetic acid, the copolymer undergoes complete degradation through hydrolysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1225–1232, 2006     

Surface modification of PET films by atmospheric pressure plasma exposure with three reactive gas sources

The surface modification of poly (ethylene terephthalate) (PET) film was carried out using an atmospheric pressure plasma (APP) jet device with three reactive gases: air, N₂, and Ar. The water contact angles on the PET film were found to decrease considerably after the APP exposure. The changes in the advancing and receding contact angles of water on the APP-exposed PET film with aging time were examined by the wetting force measurements employing the Wilhelmy method. The hydrophobic recovery due to the rinsing with water as well as the aging in air was observed only for the advancing angle, which was probably caused by the dissolution of low molecular weight oxidized materials into water, the loss of volatile oxidized species to the atmosphere and the reorientation and the migration of polymer chains. The wettability and the surface free energy of the APP-exposed PET film after diminishing hydrophobic recovery was sufficiently large compared with the untreated film. X-ray photoelectron spectroscopy confirmed that the PET film surface was oxidized due to the APP exposure. When N₂ gas was used for the APP exposure, the surface nitrogen concentration was found to increase with decreasing D. The surface oxygen concentration on the APP-exposed PET film was reduced by rinsing with water, in accordance with the hydrophobic recovery behavior. From atomic force microscopy, surface topographical change due to the APP exposure was observed. The changes in the PET surface properties due to the APP exposure as mentioned above were remarkable for using N₂ gas.     

Synthesis of a polyurea from a glucose‐ or mannose‐containing N‐alkyl urea peptoid oligomer

N‐alkyl urea peptoid oligomers containing glucose or mannose have been synthesized and characterized. The oligomers were subsequently polymerized using a step‐growth polymerization with hexamethylene diisocyanate. Equal moles of both monomers were used to guarantee high‐molecular weight polymers. The polymers were characterized by gel permeation chromatography, nuclear magnetic resonance, and Fourier‐transform infrared spectroscopy, and contact angle measurements of solvent cast thin films. Sulfation of the final polymers was achieved using a SO₃/pyridine complex in pyridine to afford the heparin biomimetics. The average degree of sulfation was calculated to be 3.5 sulfates per saccharide as measured by elemental analysis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5230–5238     

Low‐rate dynamic contact angles on poly(methyl methacrylate/ethyl methacrylate, 30/70) and the determination of solid surface tensions

Low‐rate dynamic contact angles of 12 liquids on a poly(methyl methacrylate/ethyl methacrylate, 30/70) P(MMA/EMA, 30/70) copolymer were measured by an automated axisymmetric drop shape analysis‐profile (ADSA‐P). It was found that five liquids yield nonconstant contact angles, and/or dissolve the polymer on contact. From the experimental contact angles of the remaining seven liquids, it is found that the liquid–vapor surface tension times cosine of the contact angle changes smoothly with the liquid–vapor surface tension (i.e., γ_l|Kv cos θ depends only on γ_l|Kv for a given solid surface or solid surface tension). This contact angle pattern is in harmony with those from other methacrylate polymer surfaces previously studied.^45,50 The solid–vapor surface tension calculated from the equation‐of‐state approach for solid–liquid interfacial tensions¹⁴ is found to be 35.1 mJ/m², with a 95% confidence limit of ± 0.3 mJ/m², from the experimental contact angles of the seven liquids. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2039–2051, 1999     

Fluorine-based plasmas: Main features and application in micro-and nanotechnology and in surface treatment

Fluorine cold plasmas produced by an electrical discharge in SF₆, CF₄, CHF₃ or C₄F₈ gases, principally, have two main fields of application. The first and historical application is etching of materials for microelectronics and later for micro- and nanotechnology. The second concerns the modification of surface properties, mostly in terms of reflectance and wettability. After an introduction to cold plasmas and plasma–surface interaction principles, the article aims at presenting successively the evolution of fluorine plasma etching processes since the origin with respect to other halogen-based routes in microelectronics, the important and raising application in deep etching and microtechnology, and finally some examples in surface treatment.     

Surface grafting of cobalt complexes on polymeric supports: Evidence for site isolation and applications to reversible dioxygen binding

Imprinted polymers were synthesized using the surface‐grafting technique with [Co(III) 1 (vpy)(dmap)]PF₆ { 1 , bis[2‐hydroxy‐4‐(4‐vinylbenzyloxy)benzaldehyde]ethylene‐diimine; vpy: 4‐vinylpyridine; dmap: N,N′‐dimethyl‐4‐aminopyridine} as the template. The metallated sites were probed using spectroscopic techniques including UV–vis, Fourier transform infrared, and electron paramagnetic resonance (EPR) spectroscopies to investigate the site architecture and isolation of the immobilized sites in the surface‐grafted polymers. EPR studies showed a distribution of four and five coordinated sites similar to the bulk copolymers, and the surface‐grafted polymer showed reversible binding to dioxygen in multiple cycles. Both results indicated site isolation in the surface‐grafted polymers analogous to the bulk polymers. Although the dioxygen binding in surface‐grafted polymers is reversible, the spin density decreases to 50% in the third cycle as opposed to bulk copolymers. This indicates that the sites are more heterogeneous and more exposed to the environment than the analogous sites in bulk copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 888–897, 2001     

pH responsive surfaces with nanoscale topography

We report the preparation of nanostructured adaptive polymer surfaces by diffusion of an amphihilic block copolymer toward the interface. The surface segregation of a diblock copolymer, polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA), occurred when blended with high molecular weight polystyrene employed as a matrix. On annealing, the polymer surfaces changed both the chemical composition and the hydrophilicity depending on the environment and pH, respectively. By exposure to either water vapor or air, the surface wettability varied between hydrophilic and hydrophobic. In addition, surface enrichment on diblock copolymer by water vapor annealing led to self‐assembly occurring at the interface. Hence, nanostructured domains can be observed by AFM in liquid media. Moreover, the PAA segments placed at the interface respond to pH and can switch from an extended hydrophilic state at basic pH values to a collapsed hydrophobic state in acidic media. Accordingly, the surface morphology changed from swelled micelles to nanometer size holes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2982–2990, 2010     

Alternative approach to the design of thermosensitive polymers: The addition of hydrophobic groups to the ends of hydrophilic polyether

We synthesized thermosensitive polymers by adding hydrophobic groups to the ends of a hydrophilic polyether, poly(ethylene oxide‐co‐propylene oxide). The cloud points of the polymers were controlled by the molecular weight of the polyether and the kind of hydrophobic end group. The polymers showed relatively sharp phase transitions, as observed by turbidimetry. The order of the cloud points of the polymers with various end groups did not follow that of the critical micelle concentrations of the polymers determined with fluorescence measurements with pyrene as a probe. The cloud points of the polymers linearly decreased with increasing concentrations of salts (Na₂SO₄ and Na₃PO₄). The slopes of the linear lines were almost constant, regardless of the kind of hydrophobic group and the molecular weight of the polyether. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1007–1013, 2005     

A novel poly(p‐phenylene) containing alternating poly(perfluorooctylethyl acrylate‐co‐methyl methacrylate) and polystyrene grafts by combination of atom transfer radical polymerization and Suzuki coupling processes

A poly(p‐phenylene) (PP), carrying perfectly alternating, well‐defined poly(perfluorooctylethyl acrylate‐co‐methyl methacrylate) [P(FEA‐co‐MMA)] and polystyrene (PS) side chain grafts, was synthesized by the combination of atom transfer radical polymerization (ATRP) and Suzuki cross‐coupling processes. First, dibromobenzene and diboronic ester functional macromonomers of P(FEA‐co‐MMA) and PS, respectively, were prepared by ATRP. In the second step, PP with lateral alternating P(FEA‐co‐MMA) and PS chains was synthesized by a Suzuki coupling reaction in the presence of Pd(PPh₃)₄ catalyst. The wetting behavior of the polymers was studied by measurements of the static contact angle θ of thin films (200?400 nm thickness) using water and n‐hexadecane as wetting liquids. The obtained fluorinated PP showed high static contact angles with both interrogating liquids, exhibiting simultaneously hydrophobic (θ_w = 111°) and lipophobic (θ_h = 67°) properties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012