Aging of a donor conjugated polymer: Photochemical studies of the degradation of poly[2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylenevinylene]

This article is devoted to the study of the photoaging and thermal aging of poly[2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylenevinylene] (MDMO–PPV; also called OC1C10–PPV) used in organic solar cells. Thin MDMO–PPV films (thickness < 1 μm) were exposed to ultraviolet‐light irradiation (λ > 300 nm) in the presence of air or thermooxidized at 60 °C. The modifications of the chemical structure of the matrix were analyzed with ultraviolet–visible and infrared spectroscopy. The oxidation products that formed were identified by postirradiation treatments, including chemical derivatization reactions. On the basis of the identification of the various products formed, a two‐step radical mechanism is proposed to account for the modification of the chemical structure of the polymeric matrix. It involves first the oxidation of the ether substituent followed by the oxidation of the double bonds. These reactions are responsible for a loss of conjugation of MDMO–PPV, chain scissions, and a decrease in the visible absorbance, which are anticipated to drastically impair the photovoltaic properties of the material. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 317–331, 2007     

Surface modification of ultrahigh‐molecular‐weight polyethylene fibers

To prevent the loss of fiber strength, ultrahigh‐molecular‐weight polyethylene (UHMWPE) fibers were treated with an ultraviolet radiation technique combined with a corona‐discharge treatment. The physical and chemical changes in the fiber surface were examined with scanning electron microscopy and Fourier transform infrared/attenuated total reflectance. The gel contents of the fibers were measured by a standard device. The mechanical properties of the treated fibers and the interfacial adhesion properties of UHMWPE‐fiber‐reinforced vinyl ester resin composites were investigated with tensile testing. After 20 min or so of ultraviolet radiation based on 6‐kW corona treatment, the T‐peel strength of the treated UHMWPE‐fiber composite was one to two times greater than that of the as‐received UHMWPE‐fiber composite, whereas the tensile strength of the treated UHMWPE fibers was still up to 3.5 GPa. The integrated mechanical properties of the treated UHMWPE fibers were also optimum. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 463–472, 2004     

Batch emulsion copolymerization of 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D‐glucofuranose and butyl acrylate: Synthesis and properties of the sugar latices

To obtain new polymer latices based on sugar derivative, batch emulsion copolymerizations of 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and n‐butyl acrylate (BA) were carried out at 70 °C, with potassium persulfate as the initiator. 3‐MDG polymerizes faster than BA because of its higher reactivity ratio, r_(3‐MDG) = 1.94 versus r_(BA) = 0.54. The effect of the initial monomer composition on the polymerization rate and the thermal properties of the end copolymers was investigated. The overall rate of polymerization increases by enhancing the sugar content in the initial monomer composition. The glass‐transition temperature is linearly related to the sugar content in the copolymer. The influence of the type of surfactant showed that the particle size increases by changing from ionic to nonionic surfactant. Furthermore, the effect of the added acrylic acid (AA) on the rheological properties suggests that the sugar latices exhibit different non‐Newtonian flows depending on the pH of the latex and on the AA concentration on the particle surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 788–803, 2003     

Self‐organization of liquid crystalline 3,4,5‐tris[(11‐methacryloyl‐undecyl‐1‐oxy)‐4‐benzyloxy]benzoates in low‐shrinkage methacrylate mixtures

Crystallization and supramolecular aggregation of 3,4,5‐tris[(11‐methacryloyl‐undecyl‐1‐oxy)‐4‐benzyloxy]benzoate (1), 2‐methyl‐(1,4,7,10,13‐pentaoxabenzocyclopentadecane)‐3,4,5‐tris[(11‐methacryloyl‐undecyl‐1‐oxy)‐4‐benzoxyloxy]benzoate (2) and its 1 : 1 sodium triflate complex (2a) are described in solutions of methacrylate monomers. Formation of gels and subsequent polymerization yielded “supramolecular interpenetrating networks” consisting of an isotropic polymethacrylate resin, percolated by supramolecular aggregates of the solute, which are covalently connected to the resin phase. Compound 1 formed whisker‐type crystals, while 2 self‐organizes in networks of elongated supramolecular fibrils with diameters corresponding to the twofold length of one molecule. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 631–640, 2000     

Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002     

Heteroarm H‐shaped terpolymers through the combination of the Diels–Alder reaction and controlled/living radical polymerization techniques

Heteroarm H‐shaped terpolymers (PS)(PtBA)–PEO–(PtBA)(PS) and (PS)(PtBA)–PPO–(PtBA)(PS) [where PS is polystyrene, PtBA is poly(tert‐butyl acrylate), PEO is poly(ethylene oxide), and PPO is poly(propylene oxide)], containing PEO or PPO as a backbone and PS and PtBA as side arms, were prepared via the combination of the Diels–Alder reaction and atom transfer radical and nitroxide‐mediated radical polymerization routes. Commercially available PEO or PPO containing bismaleimide end groups was reacted with a compound having an anthracene functionality, succinic acid anthracen‐9‐yl methyl ester 3‐(2‐bromo‐2‐methylpropionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethylpiperidin‐1‐yloxy)ethoxycarbonyl]propyl ester, with a Diels–Alder reaction strategy. The obtained macroinitiator with tertiary bromide and 2,2,6,6‐tetramethylpiperidin‐1‐oxy functional end groups was used subsequently in the atom transfer radical polymerization of tert‐butyl acrylate and in the nitroxide‐mediated free‐radical polymerization of styrene to produce heteroarm H‐shaped terpolymers with moderately low molecular weight distributions (<1.31). The polymers were characterized with ¹H NMR, ultraviolet, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3947–3957, 2006     

A flame‐retardant phosphate and cyclotriphosphazene‐containing epoxy resin: Synthesis and properties

A novel flame‐retardant epoxy resin, (4‐diethoxyphosphoryloxyphenoxy)(4‐glycidoxyphenoxy)cyclotriphosphazene (PPCTP), was prepared by the reaction of epichlorohydrin with (4‐diethoxyphosphoryloxyphenoxy)(4‐hydroxyphenoxy)cyclotriphosphazene and was characterized by Fourier transform infrared, ³¹P NMR, and ¹H NMR analyses. The epoxy resin was further cured with diamine curing agents, 4,4′‐diaminodiphenylmethane (DDM), 4,4′‐diaminodiphenylsulfone (DDS), dicyanodiamide (DICY), and 3,4′‐oxydianiline (ODA), to obtain the corresponding epoxy polymers. The curing reactions of the PPCTP resin with the diamines were studied by differential scanning calorimetry. The reactivities of the four curing agents toward PPCTP were in the following order: DDM > ODA > DICY > DDS. In addition, the thermal properties of the cured epoxy polymers were studied by thermogravimetric analysis, and the flame retardancies were estimated by measurement of the limiting oxygen index (LOI). Compared to a corresponding Epon 828‐based epoxy polymer, the PPCTP‐based epoxy polymers showed lower weight‐loss temperatures, higher char yields, and higher LOI values, indicating that the epoxy resin prepared could be useful as a flame retardant. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 972–981, 2000     

Hydrophobically controlled self‐association of pH‐ and thermo‐sensitive triblock copolymers based on poly(acrylic acid‐co‐tert‐butyl acrylate) and poly(propylene oxide)

Aqueous solution properties of amphiphilic P(AA‐co‐tBA)‐b‐PPO‐b‐ P(AA‐co‐tBA) copolymers having various tBA contents are presented in this article. These copolymers show pH‐sensitive behavior depending on tBA/AA ratio. Hydrophobic interactions between tBA units leading to pH‐dependent macroscopic aggregates were evidenced by turbidimetry. The aggregation behavior of the PPO middle block was concealed in presence of tBA units. The formation of water‐soluble aggregated objects was characterized by Asymmetrical Flow Field Flow Fractionation (AsF4). By increasing tBA/AA ratio, we observed an increase of aggregates size as well as a reduction of the critical concentration aggregation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1944–1949     

Three‐component,negative‐type,alkaline‐developable,thermally stable,and photosensitive polymer based on poly(2,6‐dihydroxy‐1,5‐naphthalene), a crosslinker,and a photoacid generator

A negative working and chemically amplified photosensitive polymer has been developed, which is based on poly(2,6‐dihydroxy‐1,5‐naphthalene) (PDHN), the crosslinker 4,4′‐methylenebis[2,6‐bis(hydroxymethyl)]phenol, and the photoacid generator (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐(2‐methylphenyl)acetonitrile. PDHN, with a number‐average molecular weight of 25,000, was prepared by the oxidative coupling polymerization of 2,6‐dihydroxynaphthalene with di‐μ‐hydroxo‐bis[(N,N,N′,N′‐tetramethylethylenediamine)copper(II)] chloride in 2‐methoxyethanol at room temperature. The resulting PDHN showed a 5% weight loss temperature of 440 °C in nitrogen and a low dielectric constant of 2.82. The resist showed a sensitivity of 8.3 mJ cm^?2 and a contrast of 11 when it was exposed to 436‐nm light, followed by postexposure baking at 100 °C for 5 min and development with a 2.38 wt % aqueous tetramethylammonium hydroxide solution at 25 °C. A fine negative image featuring 10‐μm line‐and‐space patterns was obtained on a film 3 μm thick exposed to 10 mJ cm^?2 of ultraviolet light at 436 nm in the contact‐printed mode. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2235–2240, 2004     

The kinetics of a negative‐tone acrylic photoresist for 193‐nm lithography

Polymethacrylates with tert‐alcohol ester were synthesized as negative‐tone chemical amplification photoresists (CAMPs) for 193‐nm microlithography. The acid‐catalyzed dehydration reaction of the CAMPs was analyzed via Fourier transform infrared. The crosslinking behavior following the dehydration reaction of the exposed CAMPs made it possible for them to be used as negative‐tone photoresists. During the postexposure‐baking process of the resists, the decay of the active proton concentration due to the evaporation and trapping of the active acid was lumped to a time constant (τ). Kinetic studies revealed this dehydration reaction was the first order to the hydroxy group and proton concentration. The introduction of the isobornyl methacrylate monomer into the resists produced a higher glass‐transition temperature as well as a higher reactive ion etching resistance. The lithographic performance was investigated by use of isopropyl alcohol as a developer under various processing conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 954–961, 2000     

Synthesis and characterization of PEE‐PEO diblock copolymers with complementary end‐groups for hydrogen‐bond heteroassociation

Poly(ethylethylene‐b‐ethylene oxide) (PEE‐PEO) diblock copolymers with pyridine‐benzoic acid end‐groups for heterodimeric hydrogen bonding were designed as a possible means to noncentrosymmetric organizations by spontaneous self‐assembly. These end‐functionalized polymers were synthesized by anionic living polymerization with protected initiator and terminating reagents. A series of polymeric intermediates with different end‐groups was characterized by proton nuclear magnetic resonance, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and gel permeation chromatography. Preliminary studies of solid‐state organization by differential scanning calorimetry and small‐angle X‐ray scattering provided evidence for a long‐range order that was sensitive to chain length, copolymer composition, and end‐group structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 207–219, 2000     

Photo‐co‐carcinogenesis of Topically Applied Retinyl Palmitate in SKH‐1 Hairless Mice

Cosmetic products that contain retinyl palmitate are popular as antiaging skin treatments; however, recent studies suggest a risk for enhanced skin tumor development with topical retinyl palmitate applications and exposure to solar ultraviolet radiation (UVR). In this study, we investigated the potential of retinyl palmitate to enhance UVR‐induced photo‐co‐carcinogenesis. Groups of 36 male and 36 female SKH‐1 hairless mice were exposed to simulated solar light (SSL) and treated with the control cream or creams containing retinyl palmitate, 5 days per week for 40 weeks. Other groups of mice were exposed to SSL and received no cream treatment or received cream treatments and were exposed to ultraviolet‐A or ultraviolet‐B. Mice were monitored for the development of skin tumors, and the incidences and multiplicities of squamous cell neoplasia were determined by histopathology. In both the absence and presence of SSL, mice administered the control cream developed skin tumors earlier and had higher incidences and multiplicities of skin squamous cell neoplasms than mice that received no cream treatment. Compared to the control cream groups, mice exposed to SSL and administered the retinyl palmitate creams demonstrated earlier onsets of skin tumors and had increased incidences and multiplicities of squamous cell skin neoplasms.     

ASAXS study of styrene‐grafted sulfonated poly(vinylidene fluoride) membranes

Small‐angle and wide‐angle X‐ray scattering and anomalous small‐angle X‐ray scattering were used to investigate proton‐conducting membranes prepared by radiation‐induced styrene grafting and sulfonation of commercial poly(vinylidene fluoride) (PVDF‐g‐PS) films. The membranes retain the lamellar and highly oriented structure of the original PVDF films even through excessive grafting and sulfonation. The sulfonate groups aggregate in the central part of the amorphous layers, where they form a weakly ordered structure that does not show any preferred orientation. This structure is suggested to be lamellar with alternate metal‐sulfonated hydrate and PVDF‐g‐PS layers. The lamellar period is 15.1 Å. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1734–1748, 2000     

Synthesis and property comparison of isomeric AB‐type homo‐ and copoly(etherimide)s

AB‐type homo‐ and copoly(etherimide)s were prepared by the polymerization of 3‐ and 4‐(3,4‐dicarboxyphenyloxy)aniline hydrochlorides ( 3A and 4A ) at 160 °C in dimethylacetamide in the presence of triethylamine and triphenyl phosphite. After the structures of the polymers were characterized, their solubilities, ultraviolet–visible (UV–vis) absorption behaviors, thermal properties, and crystallinities were measured, and these properties are discussed with respect to the structure of the homopolymers and the composition of the copolymers. Poly(etherimide) (PEI) derived from 3A [PEI( 3A )] was amorphous and soluble in chloroform on heating, whereas that derived from 4A [PEI( 4A )] was crystalline and insoluble in common organic solvents even on heating. In UV–vis absorption spectra, PEI( 4A ) showed a small bathochromic shift relative to N‐phenylphthalimide, but PEI(3A) did not. PEI(3A) revealed a glass‐transition temperature (T_g) at 195 °C, but no T_g was detectable for PEI( 4A ). All the measured physical properties of the copoly(etherimide)s showed a good dependence on their composition between PEI( 3A ) and PEI( 4A ). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 402–410, 2000     

Synthesis and characterization of 4‐vinyl pyridine‐grafted Teflon‐PFA film for water technologies

To get highly reactive polymeric materials for selective studies of enzyme immobilization, water purification, separation, and enrichment technologies, we attempted to graft 4‐vinyl pyridine (4‐VP) onto Teflon‐PFA by simultaneous γ‐ray initiation. The resulting graft copolymers were quaternized by treatment with some alkylating agents. Optimum conditions for grafting were evaluated through the variation of the total dose of radiation, the amount of water, and the monomer concentration. The effect of the solvent composition (H₂O/MeOH) was also studied. In the presence of MeOH, grafting occurred less often and was nonselective as 4‐VP was incorporated on both sides in comparison with highly selective grafting in an aqueous medium. The percentages of the grafting, total conversion, and grafting efficiency and the rates of the polymerization, grafting, and homopolymerization were also evaluated. Some other monomers such as methacrylic acid, methyl methacrylate, maleic acid, acrylonitrile, and vinyl imidazole were not incorporated onto the backbone film under the optimum grafting reaction conditions evaluated for the grafting of 4‐VP. Although some grafting occurred, the graft yield was too low to be considered of any significance. The grafted films were quaternized with benzyl chloride, and quaternized and unquaternized films were used for the immobilization of lipase. The former showed high activity with lipase and has potential for development as a bioreactor. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4506–4518, 2000     

Study on the cationic ring‐opening polymerization of 1,3‐dioxepane in the presence of organic acids

1,3‐Dioxepane was polymerized with triflic acid as an initiator in the presence of acetic acid (AA) and hexane diacid. The structure of the poly(1,3‐dioxepane) (polyDOP) obtained was characterized by ¹H NMR spectra and gel permeation chromatography. The molecular weights (MWs) were determined by vapor pressure osmometry. The results obtained in both systems were completely different from those in which low‐MW polyols were used as chain‐transfer agents. When the molar ratio of carboxylic acid to triflic acid was low, high‐MW polyDOP with a controlled MW and narrow MW distribution was obtained. The content of the ester group in the final product depended greatly on the molar ratio of AA to triflic acid. The polymerization mechanism is discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1232–1240, 2000     

Development of hydrogenated ring‐opening metathesis polymers

New hydrogenated ring‐opening metathesis polymers with excellent thermal and optical properties were developed. These polymers were prepared by the ring‐opening metathesis polymerization of ester‐substituted tetracyclododecene monomers followed by the hydrogenation of the main‐chain double bond. The degree of hydrogenation was an important factor for the thermal stability of the polymers, and as complete hydrogenation as possible was necessary to obtain a thermally stable polymer. The completely hydrogenated ring‐opening polymer derived from 8‐methyl‐8‐methoxycarbonyl‐substituted monomer has a glass‐transition temperature of 171 °C and a 5% weight‐loss temperature of 446 °C. This polymer has excellent thermal and optical properties because of its bulky and unsymmetrical polycyclic structure in the main chain and is an alternative to glass or other transparent polymers such as poly(methyl methacrylate) and polycarbonate resin. This polymer has also been used in a wide variety of applications, such as optical lenses, optical disks, optical films, and optical fiber. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4661–4668, 2000     

Synthesis and properties of bio‐based polyurethanes bearing hydroxy groups derived from alditols

Four kinds of bio‐based polyurethanes bearing hydroxy groups in the pendants were synthesized by the polyaddition of D ‐mannitol‐ and D,L ‐erythritol‐derived diols (1,2:5,6‐di‐O‐isopropylidene‐D ‐mannitol and 1,2‐O‐isopropylidene‐D,L ‐erythritol) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and the subsequent deprotection of the isopropylidene groups. They were hydrolyzed much more quickly than the corresponding protected polyurethanes at 50 °C and pH 7.0, although their hydrolytic degradation rate was lower than that of polyurethanes with saccharic and glucuronic lactone groups, which had been reported in our previous articles. The introduction of D ‐mannitol units to the polyether‐polyurethanes containing poly(oxytetramethylene) glycol units also enhanced their hydrolyzibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Damage‐depth profiling of ion‐irradiated polyimide films with a variable‐energy positron beam

Various polyimide layers [2.2–2.6 μm of hexafluoroisopropylidene bis(phthalic anhydride‐oxydianiline), pyromellitic dianhydride‐oxydianiline, and 3,3′‐4,4′‐biphenyltetracarboxylic dianhydride‐p‐phenylenediamine] spin‐coated on silicon substrates were studied with a variable‐energy positron beam in combination with a Doppler‐broadened annihilation radiation technique. From the experiments, the thickness of the layers was estimated with the VEPFIT routine. These values corresponded well to the values determined from interferometry and ellipsometry. Irradiation of the polyimides with 1 × 10¹⁵ boron ions/cm² at an energy of 180 keV led to a strong chemical modification of the irradiated top layer. This caused the inhibition of positronium formation in the irradiated layer, which was observed as a lowering of the annihilation line S parameter. The thickness of the modified layer was estimated to be 700–800 nm. This value did not agree with the ellipsometric measurements but corresponded to the maximum implantation depth of boron ions calculated with TRIM (Transport of Ions in Matter) code. The positron results appeared somewhat larger than the TRIM estimates. Reasons for these relations are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3062–3069, 2000     

LC polyimides. XXXVI. Poly(ester imide)s derived from N,N′‐Bis(4‐hydroxyphenyl)biphenyl‐3,3′,4,4′‐tetracarboxylic diimide and aliphatic dicarboxylic acids

A new mesogenic monomer was prepared from biphenyl‐3,3′,4,4′‐tetracarboxylic dianhydride and 4‐aminophenol followed by the acylation of OH groups with propionic anhydride. This diphenol propionate was polycondensed by transesterification with decane‐1,10‐dicarboxylic acid, dodecane‐1,12‐dicarboxylic acid, and eicosane‐1,20‐dicarboxylic acid or with equimolar mixtures of two dicarboxylic acids. The resulting poly(ester imide)s were characterized by elemental analyses, ¹H NMR spectra, inherent viscosities, DSC measurements, optical microscopy, and X‐ray measurements with synchrotron radiation at variable temperatures. An enantiotropic smectic A phase in the molten state and a crystalline smectic E (or H) phase in the solid state were found in all cases. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3019–3027, 2000