Synthesis of carbohydrate‐segmented polydimethylsiloxanes by hydrosilylation

Carbohydrate‐modified polysiloxanes have been presented several times within the last decade. In this work, a new route to carbohydrate‐segmented polysiloxanes is presented. A series of allyl‐group‐containing bifunctional carbohydrate derivatives was synthesized and reacted with hydrodimethylsilyl‐terminated polysiloxane in hydrosilylation reactions with Speier's catalyst. The carbohydrate monomers and the resulting materials were fully characterized with ¹H and ¹³C NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3814–3822, 2005     

New fluorinated thermoplastic elastomers. I. The synthesis and thermal characteristics of α,ω‐dihydrosilane hybrid fluorinated polysiloxane precursors

The synthesis of new α,ω‐dihydrosilane hybrid fluorinated polysiloxanes is described via the polycondensation between a diallyl perfluorinated compound and tetramethyldisiloxane. Control over the size of the oligomers is possible when the reaction is performed in two steps. The length of the polysiloxane chains influences the glass‐transition temperature and the thermal stability of the fluorinated oligomers: the higher the length is, the higher the glass‐transition temperature and the thermal stability are. The synthesized compounds have been characterized with ¹H, ¹⁹F, and ²⁹Si NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4485–4492, 2002     

Self‐assembling directed synthesis of a novel terephthalamide‐bridged ladderlike polysiloxane

A novel, soluble terephthalamide‐bridged ladderlike polysiloxane ( L ) was synthesized successfully for the first time by stepwise coupling polymerization. The process involved the hydrogen‐bonding self‐assembly of amido groups, which resulted in the formation of a more highly ordered polymeric structure. A novel monomer, bis(3‐methyldimethoxysilylpropyl) terephthalamide ( M ), was prepared by a hydrosilylation reaction in the presence of dicyclopentadienyl platinum dichloride as a catalyst. The structures of the monomer ( M ) and the polymer ( L ) were characterized by Fourier transform infrared, ¹H NMR, ¹³C NMR, ²⁹Si NMR, mass spectrometry, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry. All the characterization data indicated that the synthesized polymer ( L ) possessed an ordered ladderlike structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3161–3170, 2002     

Hydrogen‐bonding‐aided synthesis of novel ladderlike organobridged polysiloxane containing side‐chain naphthyl groups

With a hydrogen‐bonding template, a novel soluble aryl amide‐bridged ladderlike polysiloxane, containing naphthyl as the side‐chain group, has been successfully synthesized via a stepwise coupling polymerization. It is proposed that the monomer, N,N′‐di(3‐naphthyldiethoxylsilyl‐propyl)‐[4,4′‐oxybis(benzyl amide)], prepared by Grignard and hydrosilylation reactions, undergoes self‐assembly first via amido hydrogen bonding and then via hydrolysis, followed by condensation under controlled reaction conditions to yield a high molecular weight, soluble, dark yellow polymer. The analytical results (Fourier transform infrared, ¹H NMR, ²⁹Si NMR, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry) show that the polymer possesses an ordered ladderlike architecture. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 636–644, 2003     

Novel organic–inorganic hybrid materials from renewable resources: Hydrosilylation of fatty acid derivatives

Novel hybrid organic–inorganic materials were prepared from 10‐undecenoyl triglyceride and methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate via hydrosilylation. 1,4‐Bis(dimethylsilyl)benzene, tetrakis(dimethylsilyloxy)silane, and 2,4,6,8‐tetramethylcyclotetrasiloxane were used as crosslinkers. The hydrosilylation reaction was catalyzed by Karstedt's catalyst [Pt(0)–divinyltetramethyldisiloxane complex]. The networks were structurally characterized by Fourier transform infrared spectroscopy, ¹³C NMR, and ²⁹Si magic‐angle‐spinning NMR. The thermal properties of these hybrids were studied with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The obtained materials showed good transparency and promising properties for optical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6295–6307, 2005     

Functional polysiloxanes. II. Neighboring effect in the hydrosilylation of poly(hydrogenmethylsiloxane‐co‐dimethylsiloxane)s by allylglycidylether

Polysiloxanes bearing epoxy groups as lateral substituents were prepared by the hydrosilylation of 1‐allyloxy‐2,3‐epoxypropane (allylglycidylether) with poly(hydrogenmethylsiloxane‐co‐dimethylsiloxane)s (D^H‐D copolymers) of various compositions. To determine the optimal conditions of the hydrosilylation catalyzed by hexachloroplatinic acid, the kinetics of the reaction were investigated for the poly(hydrogenmethylsiloxane) homopolymer. The reaction was first order in platinum, first order in double bonds, and 0.5 in SiH. This kinetic law was consistent with the hypothesis that hydrogenmethylsiloxane dyads are much more reactive than isolated units, which may be explained by the simultaneous insertion of two vicinal SiH's in a binuclear complex of platinum. This peculiar type of neighboring effect was investigated further by comparison of the kinetics of the hydrosilylation of D‐D^H copolymers of various compositions and D^H block lengths and was confirmed by the microstructure of a D‐D^H copolymer (50/50) before and after partial hydrosilylation. Triad analysis by ²⁹Si NMR showed that the resulting copolymer was not statistical but contained a high proportion of isolated SiH. This explains why hydrosilylation proceeded in two steps: a fast reaction of D^H‐D^H dyads and a slow reaction of the remaining isolated D^H units. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 837–845, 2000     

Polybutylene terephthalate reactive blending with polymethylhydrosiloxane by ruthenium‐catalyzed carbonyl hydrosilylation reaction

Carbonyl hydrosilylation reaction was developed to prepare reactive blending between PBT and polymethylhydrosiloxane (PMHS). It focused on the addition reaction of Si–H groups from PMHS onto carbonyl groups from PBT catalyzed by triruthenium dodecacarbonyl (Ru₃(CO)₁₂). An approach on PBT model compounds was carried out and investigated by NMR spectroscopy to evidence the potentiality and efficiency of carbonyl hydrosilylation reaction. At temperatures up to 100 °C, the hydrosilylation reaction can reach 33 mol% conversion in a few hours. Side reactions were also highlighted. Such side reactions can reach more than 23 mol% of the final products when temperature increases to 180 °C. Then hydrosilylation reaction was extended to PBT modification with a molar ratio of ester group/SiH = 3.5 and viscosity ratio polysiloxane/PBT = 4.0 × 10^?5. The reaction was carried out in an internal mixer at 220 °C and followed through the evolution of the torque of the reactional medium. Samples for different processing times were investigated by SEM and rheology. From these analyses, the dispersion of PMHS was promoted with diameters of few micrometers. The elastic behavior of final material was characteristic of solid or gel‐like structures, suggesting a network structure formation consistent with the gel fraction increase from 0 to 0.55. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1855–1868     

Functionalization of surface‐grafted polymethylhydrosiloxane thin films with alkyl side chains

Thin films of crosslinked polymethylhydrosiloxane (PMHS) have been grafted on silica using the sol–gel process allowing further functionalization by effective quantitative hydrosilylation of SiH groups by olefins within the network. Postfunctionalization gives the polysiloxane network with n‐alkyl side chains. The PMHS coating was prepared by room temperature polycondensation of a mixture of methyldiethoxysilane HSiMe(OEt)₂ monomer and triethoxysilane HSi(OEt)₃ (TH) as crosslinker. The surface‐attached films are chemically stable and covalently bonded to the silica surface. Subsequently, films were functionalized without delamination. We showed by FTIR spectroscopy how the crosslinking ratio and the molecular size of the alkenes precursors influence the extent of the hydrosilylation reaction of SiH groups in the PMHS network. We have determined that quasi‐full olefin addition catalyzed by a platinum complex occurred within soft networks of less than 5% TH with 1‐alkenes CH₂?CH(CH₂)_n‐2CH₃ of various alkyl chain lengths (n = 5, 11, 17). Powders of PMHS gel were also modified with 1‐alkenes by hydrosilylation. The SiH groups within the soft gel (5% crosslinked) were fully functionalized as shown by ²⁹Si and ¹H solid‐state NMR. The structure of functionalized polysiloxane with n‐octadecyl and n‐dodecyl side chains was studied by FTIR, wide angle X‐ray diffraction, and DSC showing crystallization of the long n‐alkyl chains in the network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3546–3562, 2008     

Analysis of β‐CH2 signals in the 13C NMR spectra of the methyl methacrylate–ethyl acrylate copolymer as a tool for microstructure determination

The incremental method of the chemical shift calculation in the ¹³C NMR spectra of the methyl methacrylate–ethyl acrylate copolymer, PMMA/EA, has been applied to the β‐CH₂ carbons. A positive simulation of the DEPT sub‐spectrum shows that it is possible to determine in this way the distribution of configurational‐compositional tetrads providing a tool for microstructure analysis of acrylic copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2147–2155, 2000     

Luminescent organo‐polysiloxanes containing complexed lanthanide ions

In this study, a type of polysiloxane with the ester as the functional side group was prepared via a hydrosilylation reaction. The functionalized polysiloxane was then allowed to complex with Tb³⁺ and Eu³⁺ ions. Fourier transform infrared, ultraviolet absorption spectra and ¹H‐NMR, ¹³C‐NMR and ²⁹Si‐NMR spectra were used to confirm the modification. Differential scanning calorimetry and thermal gravity analysis were used to study the polysiloxane's thermal properties. The complexes' luminescence spectra were recorded, and narrow‐width green and red emissions were achieved. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and surface properties of fluorinated block copolymers containing sulfonic groups

A series of fluorinated block copolymers with different fluorinated block lengths and compositions were synthesized by atom transfer radical polymerization (ATRP), and then the block copolymers containing sulfonic groups with various sulfonation levels were successfully prepared further via a sulfonation reaction. These well‐defined block copolymers were characterized by means of Fourier transform infrared (FTIR), ¹H‐nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The surface activities of the fluorinated block copolymers containing sulfonic groups in N‐methyl pyrrolidone solution and the surface properties of the films prepared from such a solution were examined, and the experimental results showed that the fluorinated block copolymers exhibited a high surface activity in solution and quite a low solid surface energy of films, even though they contain hydrophilic sulfonic groups. The critical surface tensions of these copolymers were estimated and were comparable to that of polytetrafluoroethylene. Even more interestingly, the surface activities of the block copolymers containing sulfonic groups or sodium sulfonate groups in aqueous solution were also measured. It was found that the surface activity in aqueous solution was weaker than that in N‐methyl pyrrolidone solution and depended on both the length of the fluorinated block and the sulfonation level of the block copolymers. The surface properties of the films prepared from the block copolymers in aqueous solution were tested, and most of these films exhibited a hydrophilic surface property. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4809–4819, 2004     

The preparation of a new polysiloxane copolymer with glucosylthioureylene groups on the side chains

A new polysiloxane with pendent sugar units was prepared by a two-step method: the preparation of the polysiloxane with amino groups on the side chain and then the copolysiloxane reacted with glucosyl isothiocyanate. All polymers were characterized by FT-IR 1H-NMR, 1H-1H-COSY, 13C-NMR, and DEPT respectively. In the same time, Platinum oxide was found to be a versatile and powerful hydrosilation catalyst in the hydrosilylation reaction of aminotrimethylenepolysiloxanes with heptamethylcyclotetrasiloxane (D₄^H).     

Syntheses and characterizations of bis(trialkoxysilyl)oligoimides. II. Syntheses and characterizations of fluorinated crosslinkable oligoimides with low refractive indices

Novel crosslinkable fluorinated oligoimides were prepared in two steps. The first involved the synthesis of oligoimides terminated with nadic or allylic double bonds, and the second step was materialized either by a radical addition of mercaptotrialkoxysilane derivatives onto nadic double bonds or a hydrosilylation reaction of hydrogenotrialkoxysilane derivative onto allylic double bonds. Three kinds of crosslinking of the trialkoxysilane end groups were studied. The first kind entailed a thermal self‐crosslinking of trialkoxysilane groups. The second process of crosslinking incorporated a bicomponent system—the crosslinked agent was 1,1,1‐tris(4‐hydroxyphenyl)ethane (TRIOH). The trialkoxysilane groups reacted with the hydroxyl–phenol groups of TRIOH to give thermally stable phenoxysilane bonds as well as a crosslinking network. The last method was also a bicomponent system; the oxalic acid was added into an oligoimide solution where by thermal treatment water was created. The water molecules hydrolyzed the trialkoxysilane groups into silanol groups that polycondensed into a crosslinked network following a sol–gel process. The mechanism of the different crosslinking reactions was investigated by Fourier transform infrared spectroscopy and solid‐state ²⁹Si NMR. The self‐crosslinked material prepared from precursor α,ω‐trimethoxysilyl fluorinated oligomer (M_n = 5500 g · mol^?1) exhibited a 10 wt % loss temperature under air higher than 420 °C and a low birefringence (Δn = 0.008) at 1.300 μm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2602–2619, 2001     

Highly fluorinated low‐molecular‐weight photoresists for optical waveguides

A series of highly fluorinated polymers were synthesized by copolymerization of 2,3,4,5,6‐pentafluorostyrene (PFS) and fluorinated styrene derivate monomer (FSDM). Their chemical structure were confirmed by ¹H NMR, ¹³C NMR, and ¹⁹F NMR spectra. The refractive index and cross‐linking density of the polymers can be tuned and controlled by monitoring the feed ratio of comonomers. A series of negative‐type low‐molecular‐weight fluorinated photoresists (NFPs) were prepared by composing of fluorinated polystyrene derivates (FPSDs), diphenyl iodonium salt as a photoacid generator (PAG) and solvent. The polymer films prepared from NFP by photocuring exhibited excellent chemical resistance and thermal stabilities (T_d ranged from 230.5 to 258.1 °C). A clear negative pattern was obtained through direct UV exposure and chemical development. For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.25 dB/cm at 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chemoselective synthesis of polyamides containing hydroxyl and amino substituents by direct polycondensation

A convenient method for the synthesis of polyamides containing hydroxyl and amino substituents on the aromatic rings of the backbones was developed. These polymers were prepared readily by the chemoselective polycondensation of dicarboxylic acids with diamines with hydroxyl and amino functional groups via the activating agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐bezoxazolyl)phosphonate. The model reactions were studied in detail to demonstrate the feasibility of chemoselective polycondensation. The direct polycondensation of 5‐hydroxy or 5‐aminoisophthalic acid with 4,4′‐diamino‐4″‐hydroxytriphenylmethane proceeded smoothly under mild conditions and produced the desired polyamides with inherent viscosities up to 0.73 dL · g⁻¹. The polymers obtained were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopies. The polymers were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethyl formamide, and dimethyl sulfoxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3875–3882, 2000     

Side‐chain conformational changes during the thermoshrinking process: γ‐Ray polymerization and spectroscopic study of uncrosslinked poly(methacryloyl‐Ala‐OMe)

Poly(methacryloyl‐L ‐alanine‐methyl ester) (1) has an optically active side chain and consists of thermoshrinking hydrogels upon crosslinking. We synthesized an uncrosslinked polymer of 1 by the γ‐ray polymerization method. For the prepared polymer, variable‐temperature circular dichroism (CD) and ¹H NMR spectra were studied, and we found conformational changes in the optically active side chains during the thermally induced phase transition. Intense CD spectra reveal ordered conformation in the side chain of 1 below the phase transition temperature (∼28 °C). A well‐resolved ¹H NMR spectrum of 1 at 0 °C shows that the conformational angles in the polymer side chain are fixed at low‐energy minima. With increasing temperature, the frozen side chain starts rotating vigorously and takes an unordered orientation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2671–2677, 2000     

Preparation of microcellular polysiloxane monoliths

Microcellular polysiloxane monoliths were prepared from the continuous phase of a concentrated inverse emulsion. The formulation of the material was adapted to obtain monoliths having structural properties similar to those of common poly(styrene‐co‐divinylbenzene) polyHIPEs. The network was generated by hydrosilylation reaction between a vinylsiloxane crosslinking agent and an oligomeric hydrogenosiloxane. The solids obtained were characterized by mercury porosimetry, nitrogen sorption, and SEM. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 21–32, 2008     

Synthesis and characterization of highly fluorinated poly(phthalazinone ether)s based on AB‐type monomers

Four different fluorinated methyl‐ and phenyl‐substituted 4‐(4‐hydroxyphenyl)‐2‐(pentafluorophenyl)‐phthalazin‐1(2H)‐ones, AB‐type phthalazinone monomers, have been successfully synthesized by nucleophilic addition–elimination reactions of methyl‐ and phenyl‐substituted 2‐((4‐hydroxy)benzoyl)benzoic acid with 1‐(pentafluorophenyl)hydrazine. Under mild reaction conditions, the AB‐type monomers underwent self‐condensation polymerization reactions successfully and gave fluorinated poly(phthalazinone ether)s with high molecular weights. Detailed structural characterization of the AB‐type monomers and fluorinated polymers was determined by ¹H NMR, ¹⁹F NMR, FTIR, and GPC. The solubility, thermal properties, mechanical properties, water contact angles, and optical absorption of the polymers were evaluated. The polymers had high T_gs varying from 337 to 349 °C and decomposition temperatures (T_{d, 25} wt %) above 409 °C. Tough, flexible films were cast from THF and chloroform solutions. The films showed excellent tensile strengths ranging from 70 to 85 MPa with good hydrophobicities with water contact angles higher than 95.5 °C. The polymers had absorption edges below 340 nm and very low absorbance per cm at higher wavelengths 500–2500 nm. These results indicate that the polymers are promising as high performance materials, for example, membranes and hydrophobic materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1761–1770     

The effect of an unsymmetric branched branch on the 13C NMR chemical shifts of main chain carbons in polyethylene

The ¹³C NMR spectra of copolymers of ethylene with 4‐methyl‐1‐hexene and 4‐methyl‐1‐pentene, respectively, were compared. The 4‐methyl‐1‐hexene/ethylene copolymer, which contains an unsymmetric 2‐methylbutyl branch, exhibits two distinct ¹³C NMR peaks for each of the pairwise methylenes spaced one, two, and three carbons from the backbone methine. The chemical shift differences for these pairwise methylenes are 57.4 Hz, 18.7 Hz, and 4.3 Hz, respectively, with chemical shift differences decreasing with increasing distance from the asymmetric carbon. The frequency differences for carbons farther from the branch were not distinguishable. The magnitude of the chemical shift difference also varies with temperature, with the first and second methylene carbon chemical shift differences decreasing with increasing temperature. The third carbon is almost unaffected by temperature variations. In contrast, the 4‐methyl‐1‐pentene/ethylene copolymer exhibits a single peak for each of the pairs of methylenes in the branch's vicinity. This is the first reported observation of a branched branch affecting the chemical shifts of main chain carbons in polyethylene containing short chain branches. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1210–1213, 2000