Drug–Membrane Interaction on Immobilized Liposome Chromatography Compared to Immobilized Artificial Membrane (IAM), Liposome/Water,and Octan‐1‐ol/Water Systems

The objective of this study was to investigate drug–membrane interaction by immobilized liposome chromatography (ILC; expressed as lipophilicity index log K_s) and the comparison with lipophilicity indices obtained by liposome/H₂O, octan‐1‐ol/H₂O, and immobilized artificial membrane (IAM) systems. A set of structurally diverse monofunctional compounds and drugs (nonsteroidal anti‐inflammatory drugs and β‐blockers) were selected in this study. This set of solutes consists of basic or acidic functionalities which are positively or negatively charged at physiological pH 7.4. No correlation was found between log K_s from ILC and lipophilicity indices from any of the other membrane model systems for the whole set of compounds. For structurally related compounds, significant correlations could be established between log K_s from ILC and lipophilicity indices from IAM chromatography and octan‐1‐ol/H₂O. However, ILC and liposome/H₂O systems only yield parallel partitioning information for structurally related large molecules. For hydrophilic compounds, the balance between electrostatic and hydrophobic interactions dominating drug partitioning is different in these two systems.     

Structural Properties Governing Retention Mechanisms on Immobilized Artificial Membrane (IAM) HPLC Columns

The aims of this study were to investigate whether three commercially available immobilized artificial membrane (IAM) HPLC columns yield collinear data for neutral compounds, and whether IAM scales are distinct from the log P_oct (partition coefficient in the octanol/H₂O system) scale. With these objectives, the retention mechanisms on the IAM HPLC columns were analysed by linear solvation free‐energy relationships (LSERs). A set of 68 neutral model compounds with known solvatochromic parameters and log P_oct values was investigated, allowing a regular and broad exploration of property space. The resulting solvatochromic equations clearly indicate that the three IAM stationary phases retain small neutral solutes by a balance of intermolecular forces closely resembling those underlying partitioning in octanol/H₂O and retention on a reversed‐phase LC‐ABZ HPLC column. For all systems, the solute's size and hydrogen‐bond‐acceptor basicity are the two predominant factors, whereas dipolarity/polarisability and hydrogen‐bond‐donor acidity play only minor roles.     

Retention Behavior of Neutral and Positively and Negatively Charged Solutes on an Immobilized‐Artificial‐Membrane (IAM) Stationary Phase

The retention behavior of neutral, positively charged, and negatively charged solutes on the IAM.PC.DD2 stationary phase was investigated and compared. A set of monofunctional compounds and complex drugs (steroids, nonsteroidal anti‐inflammatory drugs, and β‐blockers) were selected for this study, i.e., neutral solutes and solutes with acidic or basic functionalities which are positively charged or negatively charged at pH 7.0. The correlation between the retention factor log k_w at pH 7.0 on the IAM.PC.DD2 stationary phase and the partition coefficient log P_oct or the distribution coefficient log D_7.0 showed that the retention mechanism depends on the charge state and structural characteristics of the compounds. The neutrals were least retained on the IAM.PC.DD2 stationary phase, and positively charged solutes were more retained than negatively charged ones. This implies that the retention of the charged solutes is controlled not only by lipophilicity but also by the electrostatic interaction with the phospholipid, with which positively charged solutes interact more strongly than negatively charged ones.     

Biomimetic chromatographic analysis of selenium species: Application for the estimation of their pharmacokinetic properties

The retention behavior of selenites, selenates, seleno-dl-methionine, selenocystine, selenocystamine, selenourea, dimethyl selenide, and dimethyl diselenide was investigated by means of biomimetic liquid chromatography. For this purpose, two immobilized artificial membrane (IAM) columns, namely, IAM.PC.DD2 and IAM.PC.MG, and two immobilized plasma protein columns, human serum albumin (HSA) and α₁-acid glycoprotein (AGP) columns, were employed using different mobile phase conditions in respect to pH and buffer composition. In general, satisfactory interrelations between retention factors obtained with the two IAM stationary phases and HSA/AGP columns were obtained. Large differences were observed between biomimetic retention factors and octanol–water logD values, since the latter fail to describe electrostatic interactions. In contrast, despite the column diversity, the net retention outcome on all four biomimetic columns was quite similar, especially in the presence of phosphate-buffered saline, which by its effective shielding alleviates the differences between the stationary phases. Of the two IAM columns, IAM.PC.DD2 showed better performance when compared with HSA and AGP columns as well as to octanol–water partitioning. Biomimetic chromatographic indices were further used to estimate the percentage of human oral absorption and plasma protein binding of the eight selenium species investigated, according to equations previously reported in the literature. The estimated values of human oral absorption imply moderate absorption only for dimethyl diselenide, which also may exhibit considerable plasma protein binding. Moderate affinity for plasma proteins should also be expected for dimethyl selenide and selenocystamine.

Synthesis and characterization of a novel long‐alkyl‐chain ester‐substituted benzimidazole gelator and its octan‐1‐ol solvate

The synthesis of a novel benzimidazole derivative with a long‐chain‐ester substituent, namely methyl 8‐[4‐(1H‐benzimidazol‐2‐yl)phenoxy]octanoate, (3), is reported. Ester (3) shows evidence of aggregation in solution and weak gelation ability with toluene. The octan‐1‐ol solvate, methyl 8‐[4‐(1H‐benzimidazol‐2‐yl)phenoxy]octanoate octan‐1‐ol monosolvate, C₂₂H₂₆N₂O₃·C₈H₁₈O, (4), exhibits a four‐molecule hydrogen‐bonded motif in the solid state, with N—H…O hydrogen bonds between benzimidazole molecules and O—H…N hydrogen bonds between the octan‐1‐ol solvent molecules and the benzimidazole unit. The alkyl chains of the ester and the octan‐1‐ol molecules are in unfolded conformations. The phenylene ring is canted by 10.27 (6)° from the plane of the benzimidazole ring system. H…C contacts make up 20.7% of the Hirshfeld surface coverage. Weak C—H…π interactions involving the benzimidazole alkyl chain and three aromatic rings are observed.     

Two 5‐oxa‐2,6‐diazaspiro[3.4]octan‐1‐one derivatives from the [3+2] cyclo­addition of methylenelactams with nitrones

The two title 5‐oxa‐2,6‐di­aza­spiro­[3.4]­octan‐1‐one adducts, 7‐benzoyl‐2‐(4‐methoxy­phenyl)‐6‐phenyl‐5‐oxa‐2,6‐di­aza­spiro­[3.4]­octan‐1‐one, C₂₅H₂₂N₂O₄, (III), and 6‐tert‐butyl‐2‐(4‐methyl­phenyl)‐7‐phenyl‐5‐oxa‐2,6‐di­aza­spiro­[3.4]­octan‐1‐one, C₂₂H₂₆N₂O₂, (IV), were obtained from a stereospecific [3+2] 1,3‐cyclo­addition of 3‐methyl­ene azetidin‐2‐ones as dipolaro­philes with nitro­nes. The lactam ring is conjugated with the p‐­methoxy­phenyl or p‐methyl­phenyl moiety. The envelope conformations of the isoxazolidine rings in (III) and (IV) are different, leading the substituents to be pseudo‐axial in (III) and pseudo‐equatorial in (IV).     

Three new quinuclidine‐based structures: second harmonic generation response for 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride

The crystal structures of three quinuclidine‐based compounds, namely (1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine monohydrate, C₇H₁₃N₃·H₂O ( 1 ), 1,2‐bis(1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine, C₁₄H₂₂N₄ ( 2 ), and 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride, C₁₄H₂₄N₄²⁺·2Cl^? ( 3 ), are reported. In the crystal structure of 1 , the quinuclidine‐substituted hydrazine and water molecules are linked through N—H…O and O—H…N hydrogen bonds, forming a two‐dimensional array. The compound crystallizes in the centrosymmetric space group P2₁/c. Compound 2 was refined in the space group Pccn and exhibits no hydrogen bonding. However, its hydrochloride form 3 crystallizes in the noncentrosymmetric space group Pc. It shows a three‐dimensional network structure via intermolecular hydrogen bonding (N—H…C and N/C—H…Cl). Compound 3 , with its acentric structure, shows strong second harmonic activity.     

(Z)‐2‐(3‐Hydroxy‐4‐methoxybenzylidene)‐1‐azabicyclo[2.2.2]octan‐3‐one

Crystals of the title compound, C₁₅H₁₇NO₃, were obtained from a condensation reaction of 3‐hydroxy‐4‐methoxy­benz­aldehyde with 1‐aza­bi­cyclo­[2.2.2]­octan‐3‐one and subsequent crystallization of the product from methanol. The title compound, containing a double bond that connects the aza­bicyclic ring system to the 3‐hydroxy‐4‐methoxy­benzyl­idene group, was obtained with Z geometry.     

rac‐(Z)‐2‐(2‐Thienylmethylene)‐1‐azabicyclo[2.2.2]octan‐3‐ol

The asymmetric unit of the racemic form of the title compound, C₁₂H₁₅NOS, contains four crystallographically independent molecules. The olefinic bond connecting the 2‐thienyl and 1‐azabicyclo[2.2.2]octan‐3‐ol moieties has Z geometry. Strong hydrogen bonding occurs in a directed co‐operative O—H...O—H...O—H...O—H R₄⁴(8) pattern that influences the conformation of the molecules. Co‐operative C—H...π interactions between thienyl rings are also present. The average dihedral angle between adjacent thienyl rings is 87.09 (4)°.     

Biointeraction analysis of carbamazepine binding to α1‐acid glycoprotein by high‐performance affinity chromatography

Interactions of the drug carbamazepine with the serum protein α₁‐acid glycoprotein (AGP) were examined by high‐performance affinity chromatography. Frontal analysis studies with an immobilized AGP column and control column indicated carbamazepine had both low‐affinity interactions with the support and high‐affinity interactions with AGP. When a correction was made for binding to the support, the association equilibrium constant measured at pH 7.4 and 37°C for carbamazepine with AGP was 1.0 (±0.1)×10⁵ M^?1, with values that ranged from 5.1 to 0.58×10⁵ M^?1 in going from 5 to 45°C. It was found in competition studies that these interactions were occurring at the same site that binds propranolol on AGP. Temperature studies indicated that the change in enthalpy was the main driving force for the binding of carbamazepine to AGP. These results provide a more complete picture of how carbamazepine binds to AGP in serum. This report also illustrates how high‐performance affinity chromatography can be used to examine biological interactions and drug–protein binding in situations in which significant interactions for an analyte are present with both the chromatographic support and an immobilized ligand.     

Scavenging activity of C4‐hydroxyphenyl‐ and polyhydroxyphenyl‐1,4‐dihydropyridines toward free radicals

The radical‐scavenging ability of synthesized C4‐phenolic‐substituted 1,4‐dihydropyridines (1,4‐DHPs) toward 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH^?) and alkyl/alkylperoxyl ABAP‐derived radicals at pH 7.4 was assessed by UV–visible spectroscopy. Reactivity of 1,4‐DHPs toward DPPH^? was measured by following the decay of the absorption corresponding to the radical λ_max at 525 nm, permitting the calculation of EC₅₀, t_EC50, and antiradical efficiency values. Pseudo–first‐order kinetic rate constants for the reactivity between the C4‐phenolic‐substituted 1,4‐DHP compounds and alkyl/alkylperoxyl ABAP‐derived radicals were followed by the decrease in λ_max at 356 nm corresponding to 1,4‐DHP moiety. C4‐phenolic‐substituted 1,4‐DHPs were more reactive toward alkyl free radicals than the other tested radicals. The 3,4,5‐trihydroxyphenyl‐1,4‐DHP was the most reactive derivative toward this radical with a kinetic rate constant value of 513.2 s^?1. Also, this derivative was the most effective toward the DPPH^? radical with the lowest EC₅₀ value (5.08 µM). Comparative studies revealed that synthesized 1,4‐DHPs were more reactive than commercial 1,4‐DHPs. The scavenging mechanism involves the contribution of both pharmacophores, that is, hydroxyphenyl and 1,4‐DHP rings, which was supported by the identification of the reaction products. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 810–820, 2012     

The performance of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ionic liquid as mobile phase additive in HPLC‐based lipophilicity assessment

Ionic liquids have been widely used as green alternative mobile phase additives to shield the residuals silanols groups and modify the stationary/mobile phase HPLC systems. The present study aimed to evaluate the performance of the ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF4]) in producing extrapolated logk_w indices suitable to substitute for octanol–water logP or logD values. The effect of [EMIM][BF4] was investigated for a set of basic and neutral drugs using two different columns, BDS and ABZ⁺. [EMIM][BF4] was added simply alone or in combination with n‐octanol and was compared with the conventional masking agent n‐decylamine. [EMIM][BF4] reduced the retention by suppressing silanophilic interactions, althoug to a lower extent than n‐decylamine. Addition of n‐octanol further decreased the retention by shielding silanol sites on BDS and/or interacting with polar groups through hydrogen bonding on ABZ⁺. Logk_w/logD_7.4 relationships proved moderate compared with those derived upon addition of n‐decylamine. They were considerably improved upon the introduction of protonated fraction F⁺ in the correlation, reflecting ion pair formation between the chaotropic anion [BF4]^‐ and the protonated basic compounds. In this aspect, the ionic liquid [EMIM][BF4], although efficient as a masking agent, cannot be recommended as mobile phase additive to reproduce octanol–water partitioning. Copyright © 2010 John Wiley & Sons, Ltd.     

Studies of Interaction between Ergosta‐4,6,8(14),22‐tetraen‐3‐one (Ergone) and Human Serum Albumin by Molecular Spectroscopy and Modeling

Our previous experimental results have shown that ergosta‐4,6,8(14),22‐tetraen‐3‐one (ergone) is one of the main bioactive components of Polyporus umbellatus. The efficacy of ergone binding to human serum albumin (HSA) is critical for pharmacokinetic behavior of ergone. The interactions between ergone and HSA under simulative physiological conditions were investigated by the methods of fluorescence spectroscopy, absorption and circular dichroism spectroscopy. Fluorescence data revealed that the fluorescence quenching of HSA by ergone was the result of the formation of the ergone‐HSA complex. According to the modified Stern‐Volmer equation, the binding constants (K_a) between ergone and HSA were determined. The thermodynamic parameters, enthalpy change (ΔH) and entropy change (ΔS) for the reaction were calculated to be 0.989 kJ mol^‐1 and 11.214 J mol^‐1 K^‐1, indicating that the hydrogen bonds and hydrophobic interactions played a dominant role in the binding of ergone to HSA. The conformational investigation showed that the presence of ergone decreased the α‐helical content of HSA and induced the slight unfolding of the polypeptides of protein. Furthermore, displacement experiments using warfarin and ibuprofen indicated that ergone could bind to site I of HSA, which was also in agreement with the results of the molecular modeling.     

Evaluation of the enantioselective binding of imazalil to human serum albumin by capillary electrophoresis

In this work, a methodology for the evaluation of enantioselective binding of imazalil (IMA) enantiomers to human serum albumin (HSA) that does not require the separation of free and bound to HSA fractions is developed. This methodology comprises the incubation of IMA–HSA designed mixtures for 30 min directly in the capillary electrophoresis system and the subsequent direct injection and chiral separation of IMA employing highly sulfated β‐cyclodextrin as chiral selector and the complete filling technique. Two mathematical approaches were used to estimate apparent affinity constants (K₁), protein binding and enantioselectivity (ES) for both enantiomers of IMA. Moderate enantioselective binding of IMA enantiomers to HSA (ES = 2.0) was shown by the 1:1 stoichiometry and log K₁ values of 3.4 ± 0.4 and 3.1 ± 0.3 for the first and second eluted enantiomers, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Photocycloaddition of Cyclohex‐2‐enones to 2‐Methylbut‐1‐en‐3‐yne

Irradiation (350 nm) of 2‐alkynylcyclohex‐2‐enones 1 in benzene in the presence of an excess of 2‐methylbut‐1‐en‐3‐yne ( 2 ) affords in each case a mixture of a cis‐fused 3,4,4a,5,6,8a‐hexahydronaphthalen‐1(2H)‐one 3 and a bicyclo[4.2.0]octan‐2‐one 4 (Scheme 2), the former being formed as main product via 1,6‐cyclization of the common biradical intermediate. The (parent) cyclohex‐2‐enone and other alkylcyclohex‐2‐enones 7 also give naphthalenones 8 , albeit in lower yields, the major products being bicyclo[4.2.0]octan‐2‐ones (Scheme 4). No product derived from such a 1,6‐cyclization is observed in the irradiation of 3‐alkynylcyclohex‐2‐enone 9 in the presence of 2 (Scheme 4). Irradiation of the 2‐cyano‐substituted cyclohexenone 12 under these conditions again affords only traces of naphthalenone 13 , the main product now being the substituted bicyclo[4.2.0]oct‐7‐ene 16 (Scheme 5), resulting from [2+2] cycloaddition of the acetylenic C−C bond of 2 to excited 12 .     

Two isomers of 2,4‐di­benzyl‐8‐azabicyclo­[3.2.1]­octan‐3‐ol

The crystal structures of the title compounds, 2α,4α‐di­benzyl‐3α‐tropanol (2α,4α‐di­benzyl‐8‐methyl‐8‐aza­bi­cyclo­[3.2.1]­octan‐3α‐ol), C₂₂H₂₇NO, (I), and 2α,4α‐di­benzyl‐3β‐tropanol (2α,4α‐di­benzyl‐8‐methyl‐8‐aza­bi­cyclo­[3.2.1]­octan‐3β‐ol), C₂₂H₂₇NO, (II), show that both compounds have a piperidine ring in a chair conformation and a pyrrolidine ring in an envelope conformation. Isomer (I) is asymmetric, the benzyl groups having different orientations, whereas isomer (II) is mirror symmetric, and the N and O atoms, the C atom attached to the hydroxy group, and the methyl C atom attached to the N atom lie on the mirror plane. In the crystal structures of both (I) and (II), the mol­ecules are linked together by intermolecular O—H⋯N hydrogen bonds to form chains that run parallel to the a direction in (I) and parallel to b in (II).     

Synthesis and Cytotoxicity of 1,4‐Dihydropyridines and an Unexpected 1,3‐Oxazin‐6‐one

Eight heterocycles have been prepared in a one‐pot reaction manner based on the Hantzsch dihydropyridine synthesis. The synthesis afforded seven dihydropyridines (DHP) and one unexpected 1,3‐oxazin‐6‐one. Their structures were confirmed based on NMR spectroscopy and mass spectrometry. The obtained products have been evaluated for their cytotoxicity against eight cancer cell lines and one normal cell line. Two halogenated DHPs ( 7 and 8 ) displayed cytotoxicity toward all the nine tested cancer cell lines with IC₅₀ values from 4.10 to 58.90 μm, while others showed selective activities. DHPs ( 7 and 8 ) bearing a Me group at C(2) and C(6) as well as a halogenated substituent at C(4′) were more antiproliferative than the others.     

Quantitative evaluation of lectin‐reactive glycoforms of α1‐acid glycoprotein using lectin affinity capillary electrophoresis with fluorescence detection

α₁‐Acid glycoprotein (AGP) was previously shown to be a marker candidate of disease progression and prognosis of patients with malignancies by analysis of its glycoforms via lectins. Herein, affinity capillary electrophoresis of fluorescein‐labeled AGP using lectins with the aid of laser‐induced fluorescence detection was developed for quantitative evaluation of the fractional ratios of concanavalin A‐reactive or Aleuria aurantia lectin‐reactive AGP. Labeled AGP was applied at the anodic end of a fused‐silica capillary (50 μm id, 360 μm od, 27 cm long) coated with linear polyacryloyl‐β‐alanyl‐β‐alanine, and electrophoresis was carried out for about 10 min in 60 mM 3‐morpholinopropane‐1‐sulfonic acid‐NaOH buffer (pH 7.35). Addition of the lectins to the anode buffer resulted in the separation of lectin‐reactive glycoform peaks from lectin‐non‐reactive glycoform peaks. Quantification of the peak area of each group revealed that the percent of lectin‐reactive AGP is independent of a labeling ratio ranging from 0.4 to 1.5 mol fluorescein/mol AGP, i.e. the standard deviation of 0.5% for an average of 59.9% (n=3). In combination with a facile procedure for micro‐purification of AGP from serum, the present procedure, marking the reactivity of AGP with lectins, should be useful in determining the prognosis for a large number of patients with malignancies.