Synthesis of aromatic oxazolyl‐ and carboxyl‐functionalized polymers: Atom transfer radical polymerization of styrene initiated by 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole

The synthesis of a new compound, 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole ( 1 ), and its utility in the synthesis of oxazoline‐functionalized polystyrene by atom transfer radical polymerization (ATRP) methods are described. Aromatic oxazolyl‐functionalized polymers were prepared by the ATRP of styrene, initiated by ( 1 ) in the presence of copper(I) bromide/2,2′‐bipyridyl catalyst system, to afford the corresponding α‐oxazolyl‐functionalized polystyrene ( 2 ). The polymerization proceeded via a controlled free radical polymerization process to produce the corresponding α‐oxazolyl‐functionalized polymers with predictable number‐average molecular weights, narrow molecular weight distributions in high‐initiator efficiency reactions. Post‐ATRP chain end modification of α‐oxazolyl‐functionalized polystyrene ( 2 ) to form the corresponding α‐carboxyl‐functionalized polystyrene ( 3 ) was achieved by successive acid‐catalyzed hydrolysis and saponification reactions. The polymerization processes were monitored by gas chromatography analyses. The unimolecular‐functionalized initiator and functionalized polymers were characterized by thin layer chromatography, spectroscopy, size exclusion chromatography, and nonaqueous titration analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Isoprene polymerization via reversible addition fragmentation chain transfer polymerization

Until recently, the primary living radical polymerization method available for preparing polyisoprene was nitroxide‐mediated radical polymerization, with reversible addition‐fragmentation chain transfer polymerization being applied only in a few cases within the last couple of years. We report here the preparation of polyisoprene by RAFT in the presence of the trithiocarbonate transfer agent S‐1‐dodecyl‐S′‐(r,r′‐dimethyl‐r′′‐acetic acid)trithiocarbonate and t‐butyl peroxide as the radical initiator. The kinetics of this polymerization at an optimized temperature of 125 °C and radical initiator concentration of 0.2 equiv relative to transfer agent have been studied in triplicate and demonstrate the living nature of the polymerization. These conditions resulted in polymers with narrow polydispersity indices, on the order of 1.2, with monomer conversions up to 30%. Retention of chain‐end functionality was demonstrated by polymerizing styrene as a second block from a polyisoprene macrotransfer agent, resulting in a block copolymer presenting a unimodal gel permeation chromatogram, and narrow molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4100–4108, 2007     

Diselenocarbamates,novel initiators in ATRP of styrene

The atom transfer radical polymerizations (ATRPs) of styrene initiated by diselenocarbamates were carried out for the first time. The polymerization showed first‐order kinetic with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with narrow molecular weight distributions (as low as 1.16). The results of chain extension, ¹H NMR, UV–vis, and MALDI‐TOF MS confirmed that the resultant polystyrene possessed some degree of living diselenocarbamates terminal. However, significant amounts of dead polymers (about 53%) were also found. This work offered an alternative type of ATRP initiator, and the seleno‐terminated polymers may be useful in biotechnological and biomedical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1927–1933     

Fluorocarbon‐ended polymers: Metal catalyzed radical and living radical polymerizations initiated by perfluoroalkylsulfonyl halides

Perfluoroalkylsulfonyl chlorides and bromides initiate metal catalyzed free radical polymerization of both hydrocarbon and fluorocarbon monomers affording polymers with perfluoroalkyl end groups. In the case of styrene (S) and methyl methacrylate (MMA) with Cu‐based catalysts the process affords polymers with a relatively narrow molecular weight distribution and linear dependence of molecular weight on conversion, suggesting that a living radical polymerization mechanism occurs. The orders of reaction in monomer, initiator and catalyst for these polymerizations were determined. In the case of PMMA, the detailed structure of a perfluorobutane chain‐end was determined by NMR analysis. Perfluoroalkylsulfonyl chlorides are stable in neutral aqueous media. This permits their use as initators for fluoroolefin polymerizations in H₂O. Poly(tetrafluoroethylene‐co‐hexafluoropropylene) was obtained in good yield with few ionic end groups. The aqueous fluoroolefin polymerization appears to be catalyzed by metal zero species from the reactor walls. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3313–3335, 2000     

Atom transfer radical polymerization of styrene using the novel initiator ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate

The atom transfer radical polymerizations (ATRPs) of styrene initiated by a novel initiator, ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate (EDDCB), in both bulk and solution were successfully carried out in the presence of copper(I) bromide (CuBr) and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 115 °C. The polymerization rate was first‐order with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with very narrow molecular weight distributions (as low as 1.17) up to higher conversions in both bulk and solution. The polymerization rate was influenced by various solvents in different degrees in the order of cyclohexanone > dimethylformamide > toluene. The molecular weight distributions of the produced polymers in cyclohexanone were higher than those in dimethylformamide and toluene. The results of ¹H NMR analysis and chain extension confirmed that well‐defined polystyrene bearing a photo‐labile N,N‐(diethylamino)dithiocarbamoyl group was obtained via ATRP of styrene with EDDCB as an initiator. The polymerization mechanism for this novel initiation system is a common ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 32–41, 2006     

Living free‐radical polymerization (reversible addition–fragmentation chain transfer) of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate: A route to architectural control of side‐chain liquid‐crystalline polymers

Side‐chain liquid‐crystalline polymers of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate with controlled molecular weights and narrow polydispersities were prepared via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐(2‐cyanopropyl) dithiobenzoate as the RAFT agent. Differential scanning calorimetry studies showed that the polymers produced via the RAFT process had a narrower thermal stability range of the liquid‐crystalline mesophase than the polymers formed via conventional free‐radical polymerization. In addition, a chain length dependence of this stability range was found. The generated RAFT polymers displayed optical textures similar to those of polymers produced via conventional free‐radical polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2949–2963, 2003     

Iron‐mediated atom transfer radical polymerization of styrene with tris(3,6‐dioxaheptyl) amine as a ligand

The atom transfer radical bulk polymerization of styrene with FeX₂ (X = Br or Cl)/tris(3,6‐dioxaheptyl) amine as the catalyst system was successfully implemented at 110 °C. The number‐average molecular weight of the polymers with a narrow molecular weight distribution (weight‐average molecular weight/number‐average molecular weight = 1.2–1.5) increased linearly with the monomer conversion and matched the predicted molecular weight. The polymerization rate, initiation efficiency, and molecular weight distribution were influenced by the selection of the initiator and iron halide. The high functionality of the halide end group in the obtained polymers was confirmed by both ¹H NMR and a chain‐extension reaction. Because of its water solubility, the iron complexes could be removed easily from the reaction mixture through the washing of the polymerization mixture with water. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 483–489, 2006     

Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system: A miniemulsion approach

Ultrasonication was applied in combination with a hydrophobe for the copper‐mediated atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system. A controlled polymerization was successfully achieved, as demonstrated by a linear correlation between the molecular weights and the monomer conversion. The polydispersities of the polymers were small (weight‐average molecular weight/number‐average molecular weight < 1.5). The influence of several factors, including ultrasonication, the amount of the surfactant, and the nature of the initiator, on the polymerization kinetics, molecular weight, and particle size was studied. The polymerization rate and molecular weights were independent of the number of particles and only depended on the atom transfer equilibrium. The final particle size, however, was a function of all the parameters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4724–4734, 2000     

Synthesis and characterization of star polymers initiated by hexafunctional discotic initiator through atom transfer radical polymerization

A novel hexafunctional discotic initiator, 2,3,6,7,11,12‐hexakis(2‐bromobutyryloxy)triphenylene (HBTP), was synthesized by the esterification of 2,3,6,7,11,12‐hexahydroxytriphenylene with 2‐bromobutyryl chloride. Atom transfer radical polymerizations of styrene, methyl acrylate, and n‐butyl acrylate were carried out in 50 vol % tetrahydrofuran with HBTP/copper(I) bromide/2,2′‐bipyridyl as an initiation system. The polymers produced had well‐controlled molecular weights and narrow molecular weight distributions (<1.2). On the basis of ¹H NMR spectra of the star polymer and its hydrolyzed products, we can conclude that the initiator quantitatively initiated the polymerization of vinyl monomers and that a star polymer with a discotic core was obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2233–2243, 2001     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

Block and star block copolymers by mechanism transformation. II. Synthesis of poly(DOP‐b‐St) by combination of ATRP and CROP

Styrene underwent the ATRP process using an asymmetric difunctional initiator, 2‐hydroxylethyl 2′‐bromobutyrate in combination with CuBr and 2,2′‐bipyridine (bpy). Polystyrene with hydroxyl and bromine groups at each end of the polymer (HO‐PSt‐Br) was obtained, and used as a chain‐transfer agent in the cationic ring‐opening polymerization of 1,3‐dioxepane with triflic acid as initiator. The structures of the polymerization products were analyzed by ¹H NMR and GPC analyses, indicating the formation of block copolymer. The molecular weight distribution of the block copolymer was relatively narrow and the molecular weight of the polyDOP block was high. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 436–443, 2000     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Facile synthesis of controlled‐structure primary amine‐based methacrylamide polymers via the reversible addition‐fragmentation chain transfer process

We report here a novel direct method for the syntheses of primary aminoalkyl methacrylamides that requires mild reagents and no protecting group chemistry. The reversible addition‐fragmentation chain transfer polymerization (RAFT) of the aminoalkyl methacrylamide revealed to be highly efficient with 4‐cyanopentanoic acid dithiobenzoate (CTP) as chain transfer agent and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as initiator. Cationic amino‐based homopolymers of reasonably narrow polydispersities (M_w/M_n < 1.30) and predetermined molecular weights were obtained without recourse to any protecting group chemistry. A range of block and random copolymers were also synthesized via the RAFT process. The homopolymers and copolymers were characterized by aqueous conventional and triple detection gel permeation chromatography systems. Furthermore, the primary amine‐based methacrylamide monomers and polymers revealed to be highly stable both with the primary amino group in the protonated and deprotonated form. We have also demonstrated that stabilized gold nanoparticles can be generated with the RAFT‐synthesized amine‐based polymers via a photochemical process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4984–4996, 2008     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

Fast copper catalyzed living radical polymerization of acrylonitrile utilizing a high concentration of radical initiator

This article first reports a fast and controlled living radical polymerization (LRP) of acrylonitrile, evidenced by 81.3% monomer conversion within 40 min and well‐defined the polymers with a narrow polydispersity index (PDI) range of 1.14?1.38. This was achieved by utilizing azobis(isobutyronitrile) as radical initiator with a high concentration up to 190 mM and CuBr₂ as catalyst with a very low concentration down to 50 ppm. The polymerization displayed typical LRP characteristics, including pseudo first‐order kinetics of polymerization, the linear increase of number‐average molecular weights (MWs), low PDI values. The influence of various experimental components, radical initiator concentration, catalyst concentration, and reaction temperature, on the polymerization reaction and MW as well as PDI has been investigated in detail. ¹H NMR and gel permeation chromatography analyses as well as chain extension reaction confirmed the very high chain‐end functionality of the resultant polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and characterization of optically active polystyrene via a chiral nitroxide‐mediated polymerization

2,2,6,6‐Tetramethyl‐4‐[d‐(+)‐10‐camphorsulfonyl]‐1‐piperidinyloxy was synthesized and used as a chiral nitroxide for the bulk polymerizations of styrene initiated with benzoyl peroxide (BPO), tetraethylthiuram disulfide (TETD), and thermal initiation. The results showed that the polymerizations proceeded in a controlled/living way; that is, the kinetics presented approximately first‐order plots, and the number‐average molecular weights of the polymers with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) increased with the monomer conversion linearly. The molecular weight distributions in the case of thermal initiation were narrower than those in the case of BPO and TETD, whereas the polymerization rate with BPO or TETD as an initiator was obviously faster than that with thermal initiation. In addition, successful chain‐extension reactions were carried out, and the structures of the obtained polymers were characterized by gel permeation chromatography and ¹H NMR. The specific rotations of the polymers were also measured by polarimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1522–1528, 2006     

Study on the cationic ring‐opening polymerization of 1,3‐dioxepane in the presence of organic acids

1,3‐Dioxepane was polymerized with triflic acid as an initiator in the presence of acetic acid (AA) and hexane diacid. The structure of the poly(1,3‐dioxepane) (polyDOP) obtained was characterized by ¹H NMR spectra and gel permeation chromatography. The molecular weights (MWs) were determined by vapor pressure osmometry. The results obtained in both systems were completely different from those in which low‐MW polyols were used as chain‐transfer agents. When the molar ratio of carboxylic acid to triflic acid was low, high‐MW polyDOP with a controlled MW and narrow MW distribution was obtained. The content of the ester group in the final product depended greatly on the molar ratio of AA to triflic acid. The polymerization mechanism is discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1232–1240, 2000     

Single electron transfer‐living radical polymerization of methyl methacrylate catalyzed by ytterbium powder

Zerovalent ytterbium (Yb) powder is firstly used as a catalyst in single electron transfer‐living radical polymerization of methyl methacrylate initiated by carbon tetrachloride in N, N‐dimethylformamide (DMF) and dimethyl sulfoxide, respectively. Polymerization proceeds in a “living”/controlled way as evidenced by kinetic studies and chain extension results, producing well‐defined polymers with controlled degree of polymerization and narrow molecular weight distribution. The apparent activation energy of polymerization in DMF is accounted to be 36.2 kJ/mol, and the energy of equilibrium state is calculated to be 13.9 kJ/mol. An increase in the concentration of Yb(0) yields a higher monomer conversion. It is observed that polymerization rate experiments a rapid increase in the presence of more polar solvent water, and increasing in the content of H₂O results in an increase in the apparent rate constant of polymerization, and a decrease in the molecular weight distribution. The reaction rate and molecular weight increase along with the decrease of DMF content. The effect of Yb(0) powder content, different ligands and concentration of initiator on the polymerization is also investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate using various dithiobenzoates as chain transfer agents

Dialkyl fumarates as 1,2‐disubstituted ethylenes exhibit unique features of radical polymerization kinetics due to their significant steric hindrance in propagation and termination processes and provide polymers with a rigid chain structure different from conventional vinyl polymers. In this study, we carried out reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate (DiPF) in bulk at 80 °C using various dithiobenzoates with different leaving R groups as chain transfer agents to reveal their performance for control of molecular weight, molecular weight distribution, and chain end functionality of the resulting poly(DiPF) (PDiPF). 2‐(Ethoxycarbonyl)‐2‐propyl dithiobenzoate ( DB1 ) and 2,4,4‐trimethyl‐2‐pentyl dithiobenzoate ( DB2 ) underwent fragmentation and reinitiation at a moderate rate and consequently led to the formation of PDiPF with well‐controlled chain structures. It was confirmed that molecular weight of PDiPF produced by controlled polymerization with DB1 and DB2 agreed with theoretical one and molecular weight distribution was narrow. Dithiobenzoate and R fragments were introduced into the polymer chain ends with high functionality as 95% by the use of DB1 . In contrast, polymerizations using 1‐(ethoxycarbonyl)benzyl dithiobenzoate ( DB3 ), 1‐phenylethyl dithiobenzoate ( DB4 ), and 2‐phenyl‐2‐propyl dithiobenzoate ( DB5 ) resulted in poor control of molecular weight, molecular weight distribution, and chain end structures of PDiPF. Fragmentation and reinitiation rates of the used benzoates as chain transfer agents significantly varied depending on the R structures in an opposite fashion; that is, introduction of bulky and conjugating substituents accelerated fragmentation, but it retarded initiation of DiPF polymerization. It was revealed that balance of fragmentation and reinitiation was important for controlled polymerization of DiPF. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3266–3275     

Tertiary amine-functionalized polymers by atom transfer radical polymerization

The quantitative synthesis of tertiary amine-functionalized polymers by atom transfer radical polymerization is reported. Tertiary amine-functionalized polystyrene was prepared with the adduct of 1-(bromoethyl)benzene with 1-(4-dimethyl-aminophenyl)-1-phenylethylene as an initiator in the atom transfer radical polymerization of styrene in the presence of a copper (I) bromide/2,2′-bipyridyl catalyst system. The polymerization proceeded via a controlled free-radical polymerization process to afford quantitative yields of the corresponding tertiary amine-functionalized polystyrene with predictable number-average molecular weights (1600–4400), narrow molecular weight distributions (1.09–1.31), and an initiator efficiency of 0.95. The polymerization process was monitored by gas chromatographic analysis. The tertiary amine-functionalized polymers were characterized by thin-layer chromatography, size exclusion chromatography, potentiometry, and spectroscopy. All experimental evidence was consistent with quantitative functionalization via the 1,1-diphenylethylene derivative. Polymerization kinetic measurements showed that the polymerization reaction followed first-order-rate kinetics with respect to monomer consumption and that the number-average molecular weight increased linearly with monomer conversion. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2058–2067, 2001