Partially renewable copolyesters prepared from acetalized d‐glucitol by solid‐state modification of poly(butylene terephthalate)

The backbone of poly(butylene terephthalate) (PBT) was modified with 2,4:3,5‐di‐O‐methylene‐D ‐glucitol (Glux) using solid‐state modification (SSM). The obtained copolyesters proved to have a non‐random overall chemical microstructure. The thermal properties of these semicrystalline, block‐like, Glux‐based materials were extraordinary, showing higher melting points, and glass transition temperatures compared with other sugar‐based copolyesters prepared by SSM. These remarkable thermal properties were a direct result of the inherently rigid structure of Glux and the relatively slow randomization of the block‐like chemical microstructure of the Glux‐based copolyesters in the melt. SSM proved to be a versatile tool for preparing partially biobased copolyesters with superior thermal properties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 164–177     

Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis,curing kinetics,and network properties

Several phenol‐urea‐formaldehyde (PUF) cocondensed resol resins were synthesized by different procedures. The curing kinetics and network properties of these PUF resins were examined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). A kinetic study indicated that the activation energy values of PUF resins are generally higher than those of phenol‐formaldehyde (PF) resins during curing processes, but the curing rates of PUF resins are faster than those of PF resins. The pH values of PUF systems have a significant influence on the rate constants, although they affect the activation energy very slightly. Moreover, the dependence of activation energy on the conversion showed that there are more individual reactions with different activation energies occurring during the curing processes in PUF resins than in PF resins. The decomposition of methylene ether bridges to form methylene bridges probably occurs at high temperature in PUF resins. DMTA data indicated that the network rigidity of PUF resins is slightly lower than that of PF resin. The gel point and T_{tan δ2} transition measured by DMTA were consistent with the kinetic results obtained from the DSC data, but they were also related to the physical and mechanical properties of the network, especially with regard to the T_{tan δ2} transition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1929–1938, 2003     

From fatty acid and lactone biobased monomers toward fully renewable polymer latexes

Novel waterborne polymeric materials based on renewable resource monomers have been prepared by the environmentally friendly miniemulsion polymerization of an oleic acid‐derivative monomer (MOA) and the α‐methylene‐γ‐butyrolactone (α‐MBL). The effect of the incorporation of different amounts of α‐MBL on kinetics and polymer microstructure is investigated. The estimation of the monomer reactivity ratios (r_α‐MBL = 0.49 and r_MOA = 1.26) shows the slight lower reactivity of the α‐MBL, resulting in a random copolymer moderately enriched with MOA at the beginning of the reaction. The thermal and mechanical properties of the polymers demonstrate that by incorporating the lactone it is possible to produce copolymers in a broad range of glass transition temperatures, with high thermal stability and improved mechanical properties. This study provides a new green route toward the bio‐sourced preparation of polymer latexes with tuneable properties, which can range from coatings to adhesives. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3543–3549     

Shape memory polybenzoxazines based on a siloxane‐containing diphenol

A siloxane‐containing diphenol is synthesized from 1,1,3,3‐tetramethyldisiloxane and o‐allylphenol, followed by the Mannich condensation with aniline, methylamine, and formaldehyde yielding two siloxane‐containing benzoxazines. The onset polymerization temperature of aniline‐based benzoxazine is higher than that of the methylamine counterpart. The dynamic mechanical properties of the polybenzoxazines depend on the structure of the starting primary amines. Both polybenzoxazines exhibit one‐way dual‐shape memory behavior in response to changes in temperature, and they show excellent shape fixity ratios in bending, tension, and tensile stress–strain tests, high shape recovery ratios in bending and tension tests, but relatively low shape recovery ratios in tensile stress–strain test. The network chain segments including the alkylsiloxane units serve as a thermal control switch based on the glass transition temperatures (39 and 53 °C) for the polybenzoxazines. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1255–1266     

Conformationally restricted linear polyurethanes from acetalized sugar‐based monomers

Linear polyurethanes based on sugar monomers having D ‐gluco, galacto, and D ‐manno configurations and their secondary hydroxyl groups protected as bicyclic acetals, have been prepared by polyaddition reaction of these diol monomers to hexamethylene diisocyanate ( HMDI ) and 4,4′‐methylene‐bis(phenyl isocyanate) ( MDI ). The new polyurethanes seem to be amorphous materials, except that obtained from 2,3:4,5‐di‐O‐methylene‐galactitol and HMDI. Weight‐average molecular weights, determined by GPC, were in the range 16,000–115,200. TGA analyses indicated that the thermal stability of these bicyclic polyurethanes is comparable to those based on the isosorbide; both the onset and the maximum rate decomposition temperatures increased significantly with respect to the polyurethanes based on acyclic sugar monomers. The presence of the acetalized alditol units in the polyurethanes also increased the T_gs as compared with their acyclic analogs. Deacetalization of the polyurethanes containing di‐O‐isopropylidene‐D ‐mannitol units yielded the polyhydroxylated polymers in good yields, without apparent degradation of the polymer chain. These hydroxylated polymers showed an enhanced hydrophilicity and degradability and lower T_gs and thermal stability than their parent acetalized polyurethanes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Rendering polyureas melt processible

Because of the presence of extensive H‐bonding in the hard segments, polyureas are processed by solution techniques (e.g., dry spinning) by the use of relatively costly and environmentally unfriendly solvents. Thus, the objective of this research was to render polyureas melt processible, (i.e., to reduce their flow temperature, T_flow) without compromising their excellent mechanical properties. We hypothesized and herein demonstrate that by using conventional chain extenders (CEs) in combination with small amounts of H‐bond acceptor chain extenders (HACEs), the T_flow of polyureas can be significantly reduced from ～230 to ～180 °C, and thus melt processible products with excellent mechanical properties can be obtained. We document the synthesis of conventional polytetramethylene oxide‐based and novel polyisobutylene (PIB)‐based polyureas with T_flows ～ 180 °C and excellent mechanicals by the addition of few percents of commercially available HACEs. Products were characterized by various techniques, including Instron (tensile strengths, elongations), durometer (Shore A Hardness), dynamic mechanical thermal analysis (T_flow), and thermal gravimetric analysis (TGA) (thermal weight loss). According to TGA, a polyurea with T_flow of ～180 °C did not degrade up to ～234 °C in air. A micromorphology for melt processible polyureas is proposed that emphasizes flexibilized hard segments in the presence of HACEs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Development of functional polymers with cyclic ether moieties. I. Synthesis and properties of polyesters with dioxane moiety in the main chain

A series of novel polyesters containing dioxane moieties in their main chains were synthesized by the bulk polycondensation of trans‐2,5‐bis‐(hydroxy‐ methyl)‐1,4‐dioxane with various aliphatic dicarboxylic acid chlorides. The obtained polyesters, analyzed by differential thermal analysis, possessed crystallinity, the melting point of which exhibited a weak odd–even effect on the methylene unit number and a small decreasing trend with an increase in the methylene unit number. These properties were compared with those of similar polyesters bearing cyclohexane moieties, and it was found that the rigidity of the dioxane moiety plays an important role in enhancing the effective packing of the corresponding polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2536–2542, 2000     

Physical aging of epoxy polymers and their composites

Exposure to extended periods of sub‐T_g temperatures causes physical changes in the molecular structure of epoxy resins and epoxy‐based materials to occur. These physical aging mechanisms include the reduction in free volume and changes to the molecular configuration. As a result, mechanical, thermodynamical, and physical properties are affected in ways that can compromise the reliability of epoxy‐based engineering components and structures. In this review, the physical changes in the molecular structure of epoxies are described, and the influence of these changes on the bulk‐level response is detailed. Specifically, the influence of physical aging on the quasistatic mechanical properties, viscoelasticity, fracture toughness, thermal expansion coefficient, volume relaxation, enthalpy relaxation, endothermic peak temperature, fictive temperature, and moisture/solvent absorption capability is reviewed. Also discussed are relationships between relaxation functions, crosslink density, composite reinforcement, and epoxy/copolymer blending and the physical aging response of epoxies. Finally, the concepts of thermal and mechanical rejuvenation are discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

HTPB‐based polyurethanes. II. SINs with PMMA

Simultaneous interpenetrating networks from poly(methyl methacrylate‐co‐ethyleneglycol dimethacrylate) (PA) and a hydroxyl‐terminated polybutadiene‐based polyurethane (PU) were prepared with various hard‐segment contents (X) in the PU and different ratios (PU/PA) between the components. The level of the reinforcement, the mechanism of molecular failure, and the phase inversion depended strongly on X. Dynamic mechanical results indicated that the interpenetration occurred in the rigid blocks of the PU. The improved thermal and mechanical properties observed with higher values of X were interpreted in terms of the molecular weight and polydispersity of the hard blocks in the PU. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2861–2872, 2000     

New nanohybrids of poly(ε‐caprolactone) and a modified Mg/Al hydrotalcite: Mechanical and thermal properties

Novel composites based on poly(ε‐caprolactone) (PCL) and an organically modified layer double hydroxide (LDH) obtained using the melt‐extrusion technique have been characterized through structural, thermal, and mechanical analyses. Although exfoliation has not been achieved and despite the very low content of filler (from 1 to 3% by weight), significant enhancements are obtained in the physical and mechanical properties of the composites with respect to neat PCL. As a consequence, LDHs can substitute other nanofillers, in particular, cationic clays for polymeric matrices. They can be modified by a large number of organic anions, generally more numerous than the cationic ones, and can be mixed in very simple ways with polymers. This makes such nanofillers suitable to obtain new hybrid materials for a series of applications, from active food packaging to intelligent materials for biomedical device, for example, controlled drug release. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 945–954, 2007     

Radical ring‐opening polymerization

The radical ring‐opening polymerization (RROP) behavior of the following monomers is reviewed, and the possibility for application to functional materials is described: cyclic disulfide, bicyclobutane, vinylcyclopropane, vinylcyclobutane, vinyloxirane, vinylthiirane, 4‐methylene‐1,3‐dioxolane, cyclic ketene acetal, cyclic arylsulfide, cyclic α‐oxyacrylate, benzocyclobutene, o‐xylylene dimer, exo‐methylene‐substituted spiro orthocarbonate, exo‐methylene‐substituted spiro orthoester, and vinylcyclopropanone cyclic acetal. RROP is a promising candidate for producing a wide variety of environmentally friendly functional polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 265–276, 2001     

Synthesis and curing kinetics of cardanol‐based curing agents for epoxy resin by in situ depolymerization of paraformaldehyde

Three novel cardanol‐based phenalkamines with good stability have been successfully prepared by Mannich reaction using phenolic compounds with paraformaldehyde and hexamethylenediamine (or its mixture with other amines). The structure of the prepared phenalkamines has been analyzed using liquid chromatography‐mass spectrometry, nuclear magnetic resonance, and Fourier transform infrared spectroscopy. The curing kinetics of the prepared epoxy resin/phenalkamine systems has been investigated using differential scanning calorimetry (DSC), and determined by Kissinger, Flynn–Wall–Ozawa, and Crane methods. Furthermore, the thermal properties of the cured materials have been evaluated using DSC and thermogravimetric analysis, and the mechanical properties of the cured materials have been analyzed systematically. The results demonstrate that the phenalkamine 1 (PAA1) had a lower reactivity and better toughness than phenalkamine 2 (PAA2) and phenalkamine 3 (PAA3). In addition, PAA1 is a solid curing agent, while PAA2 and PAA3 are liquid curing agents, which were more convenient for practical usage. Results indicate that the properties of the prepared phenalkamines strongly depend on the structures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 472–480     

Influence of electronic effects from bridging groups on synthetic reaction and thermally activated polymerization of bisphenol‐based benzoxazines

Six bis‐benzoxazines based on bisphenols with different bridging groups, ? C(CH₃)₂? , ? CH₂? , ? O? , ? CO? , ? SO₂? , and single bond, were synthesized in toluene. The influence of electronic effects from bridging groups on ring‐forming reaction and thermal ring‐opening polymerization were relatively discussed in detail. Their structures were characterized by high‐performance liquid chromatography, Fourier transform infrared, ¹H NMR, differential scanning calorimetry, and elementary analysis. The quantum chemistry parameters of the bisphenols and bis‐benzoxazines were calculated by molecular simulation. The results indicated that the electron‐withdrawing groups inhibited the synthetic reaction by decreasing the charge density of α‐Cs of bisphenols and increasing energy barriers of the synthetic reactions. However, the electron‐withdrawing groups promoted the thermally activated polymerization, which resulted from their activation energy and curing temperature decrease by increasing the bond length and lowering the bond energy of C? O on oxazine rings. Besides, because of stronger electron‐withdrawing sulfone group, there were more arylamine methylene Mannich bridge structure in the polybenzoxazine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Morphology and bridging properties of (AB)n multiblock copolymers

Motivated by recent experiments (Spontak, R. J.; Smith, S. D. J Polym Sci Part B: Polym Phys 2001, 39, 947) on morphological and mechanical properties of multiblock copolymers (AB)_n, we theoretically elucidate the links between microscopically determined properties, such as the bridging fraction of chains, and mechanical properties of these materials. We do this by applying self‐consistent mean‐field theory to determine morphological aspects such as period and interfacial width and calculate the bridging fractions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 104–111, 2003     

New soybean oil–styrene–divinylbenzene thermosetting copolymers. II. Dynamic mechanical properties

A variety of new polymeric materials ranging from soft rubbers to hard, tough, and brittle plastics were prepared from the cationic copolymerization of regular soybean oil, low saturation soybean oil (LoSatSoy oil), or conjugated LoSatSoy oil with styrene and divinylbenzene initiated by boron trifluoride diethyl etherate (BF₃ · OEt₂) or related modified initiators. The relationship between the dynamic mechanical properties of the various polymers obtained and the stoichiometry, the types of soybean oils and crosslinking agents, and the different modified initiators was investigated. The room‐temperature storage moduli ranged from 6 × 10⁶ to 2 × 10⁹ Pa, whereas the single glass‐transition temperatures (T_g) varied from approximately 0 to 105 °C. These properties were comparable to those of commercially available rubbery materials and conventional plastics. The crosslinking densities of the new polymers were largely dependent on the concentration of the crosslinking agent and the type of soybean oil employed and varied from 74 to 4 × 10⁴ mol/m³. The T_g increased and the intensity of the loss factor decreased irregularly with an increase in the logarithmic crosslinking densities of the polymers. Empirical equations were established to describe the effect of crosslinking on the loss factor in these new polymeric materials. The polymers based on conjugated LoSatSoy oil, styrene, and divinylbenzene possessed the highest room‐temperature moduli and T_g 's. These new soybean oil polymers appear promising as replacements for petroleum‐based polymeric materials. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2721–2738, 2000     

Organic–inorganic interpenetrating polymer networks and hybrid polymer materials prepared by frontal polymerization

Novel polyacrylamide‐based hydrogels containing 3‐(trimethoxysilyl)propyl methacrylate and/or tetraethoxy silane were synthesized by means of frontal polymerization, using ammonium persulfate as initiator, N,N′‐methylene bisacrylamide as crosslinking agent and dimethyl sulfoxide as solvent. The obtained samples were treated at pH of 2 or 5 to induce the sol–gel reaction and evaluate their swelling behavior in the conditions. The occurrence of this reaction was assessed by solid‐state NMR. Moreover, the thermal properties of the dry materials were studied by differential scanning calorimetry and thermal gravimetric analysis, and their water‐contact angles were measured. It was found that the amount of Si affects the extent of swelling and the hydrophilicity of the resulting materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4618–4625     

Influence of composition on properties of nylon 6/EVOH blends

In this work, the relationships between composition and properties of Ny6/EVOH system were examined by means of several techniques and the results were interpreted in terms of level of compatibility. Blends of different ratio of Ny6 and EVOH have been processed in a laboratory‐based film blowing extrusion apparatus. Rheological measurements, FTIR and morphological analysis, and thermal and mechanical properties were carried out. Peculiar rheological, thermal, and mechanical behaviors were observed for the blend containing 25% by weight of EVOH. At this composition, FTIR analysis has pointed out that a minimum in molecular motion is achieved as a consequence of a maximum interaction of the polar groups (amide groups of Ny6 and hydroxyl groups of EVOH) involved. Moreover, gas permeability measurements on the blown films have been performed at T = 30°C. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2445–2455, 1999     

Development of novel flame‐retardant thermosets based on benzoxazine–phenolic resins and a glycidyl phosphinate

Modified novolac resins with benzoxazine rings were prepared and copolymerized with a glycidyl phosphinate. Their curing behavior and the thermal properties of the curing resins were studied. Copolymerization was studied with model compounds considering the functionality of the benzoxazine‐based phenolic resins and the easy isomerization of the glycidyl phosphinate. Phenolic novolac resin acts as an initiator but p‐toluensulfonic acid had to be used to decrease the curing temperature and to prevent glycidyl phosphinate from isomerizing. The materials obtained exhibited high glass‐transition temperatures and retardation on thermal degradation rates. V‐0 materials were obtained when the materials were tested for ignition resistance with the UL‐94 test. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 279–289, 2004     

Synthesis and characterization of acrylamide/acrylic acid hydrogels crosslinked using a novel diacrylate of glycerol to produce multistructured materials

In this work we propose a new crosslinking agent and the method to use it for the synthesis of acrylate based hydrogels. The use of this diacrylate of glycerol, synthesized in our laboratory, allows the generation of materials with well defined micro‐structures in the dry state, unique meso‐ and macro‐structures during swelling, and enhanced mechanical properties and swelling capacity in water. These properties depend on the crosslinking agent concentration, as well as synthesis thermal history. Poly(acrylamide‐co‐acrylic acid) hydrogels are commonly crosslinked with N, N′‐methylenebisacrylamide or N‐isopropylacrylamide. Here we obtain and use a new crosslinking agent, obtained from the reaction between glycerol and acrylic acid to produce a Diacrylate of glycerol (DAG). Two synthesis methods at equivalent molar ratio of acrylamide/acrylic acid (AM/AA) were analyzed. The mechanical properties, the swelling capacity, and the morphology at microscale of these hydrogels showed a well defined transition at a critical concentration of crosslinking agent. DAG induces the generation of hydrogels with hierarchichal structure. The micro‐structure surface morphology was investigated by scanning electron microscopy, the meso‐structure by polarized light microscopy and the macro‐structure by CCD imaging. The hydrogels with hierarchical structures showed improved mechanical properties when compared with structureless hydrogels. Control of the microstructure allows the generation of materials for different applications, i.e. templates or smart materials that interact with electromagnetic radiation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2667–2679, 2008     

High performance benzoxazine monomers and polymers containing furan groups

Furan‐containing benzoxazine monomers, 3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (P‐FBz) and bis(3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl)isopropane (BPA‐FBz), were prepared using furfurylamine as a raw material. The chemical structures of P‐FBz and BPA‐FBz were characterized with FTIR, ¹H NMR, elemental analysis, and mass spectrometry. Formation of furfurylamine Mannich bridge networks in the polymerizations of P‐FBz and BPA‐FBz increased the cross‐linking densities and thermal stability of the resulting polybenzoxazines. P‐FBz‐ and BPA‐FBz‐based polymers also exhibited high glass transition temperatures above 300 °C, high char yields, and low flammability with limited oxygen index values of 31. The dielectric (D_k = 3.21–3.39) and mechanical properties (high storage modulus of 3.0–3.9 GPa and low coefficient of thermal expansion of 37.7–45.4 ppm) of the P‐FBz‐ and BPA‐FBz‐based polymers were superior or comparable to other polybenzoxazines. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5267–5282, 2005