Studies on formation mechanism of polypyrrole microtubule synthesized by template‐free method

The influence of the polymerization time and rate as well as the solution's ionic strength on the morphology, conductivity, and molecular structure of the polypyrrole (PPy) microtubule [synthesized by the template‐free method in the presence of β‐naphthalene sulfonic acid (β‐NSA) as the dopant] were investigated. It was found that the formation of the PPy‐NSA microtubule was a slow and self‐assembled growth process. Moreover, the β‐NSA dopant played a “templatelike” role in the formation of tubular PPy‐NSA, which might be relative to its surfactant characters. This assumption was further confirmed by the phenomenon that the morphology of PPy‐NSA could be modified by increasing the ionic strength by adding inorganic salt. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 997–1004, 2001     

Polyaniline doped with different sulfonic acids by in situ doping polymerization

Doped polyaniline (PANI) was synthesized by an “in situ doping polymerization” method in the presence of different sulfonic acids, such as methanesulfonic acid (MSA), p‐methylbenzene sulfonic acid (MBSA), β‐naphthalenesulfonic acid (β‐NSA), α‐naphthalenesulfonic acid (α‐NSA), 1,5‐naphthalenedisulfonic acid (1,5‐NSA), and 2,4‐dinitronaphol‐7‐sulfonate acid (NONSA). Morphology, solubility in m‐cresol, and electrical properties of the doped PANI were measured with the variation of the molecular structure of the selected sulfonic acids. Granular morphology was obtained when the sulfonic acids without a naphthalene ring, such as MSA and MBSA, were used. Regular tubular morphology was obtained only when β‐NSA was used. The tubular morphology can be modified by changing the substitutes, the number, and location of sulfo‐group(SOH) on the naphthalene ring. These results indicated that naphthalene ring in the selected sulfonic acids plays an important role in forming the tubular morphology of the doped PANI by the “in situ doping polymerization” method. All resulting PANI salts were soluble in m‐cresol, with the solubility depending on the molecular structure of the selected dopants. Room‐temperature conductivity for the doped PANI ranges from 10⁻¹ to 10⁰S/cm. Temperature dependence of conductivity shows a semiconductor behavior, and it can be expressed by one dimenson Variable Range Hopping (VRH) model. 1 © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1277–1284, 1999     

In situ doping polymerization of polyaniline microtubules in the presence of β‐naphthalenesulfonic acid

Conducting microtubules of Polyaniline (PANI) were synthesized for the first time by the “in situ doping polymerization” method in the presence of β‐naphthal‐ enesulfonic acid (NSA) as dopant. Different doping methods, such as “immerse doping” and “grind doping,” and different synthetic conditions, such as molar ratio of aniline (An) to NSA (An/NSA), concentration of NSA in the polymerization media, reaction temperature, and time were investigated to understand the formation of microtubules. It was found that the PANI–NSA microtubules can be formed only by the “in situ doping polymerization” method, and the above synthetic conditions strongly affect the formation of the PANI–NSA microtubules, especially the molar ratio of An to NSA. An optimal condition was found under which tubules with 1–3 μm in diameter and 10–50 μm in length were obtained. The morphology of PANI–NSA tubules was proved by SEM and TEM, and their backbone structure was characterized by FTIR, UV‐VIS, XPS, and X‐ray diffraction. Results of these measurements showed that the molecular structures of the resulted PANI–NSA microtubules were identical to that of PANI–HCl synthesized by conventional method. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 151–157, 1999     

Tubular polypyrrole synthesized by in situ doping polymerization in the presence of organic function acids as dopants

Tubular polypyrrole (PPy) could be synthesized by in situ doping polymerization in the presence of β‐naphthalene sulfonic acid (NSA) as dopant. The resultant tubular PPy–NSA not only exhibits high room temperature conductivity (ς_RT = 10 S/cm) but is also soluble in m‐cresol. The molecular structure of PPy–NSA is identical to the characteristic structure of PPy synthesized by a conventional method. It has been demonstrated that NSA dopant with large molecular size and plate–lebe structure is a key factor to control formation of tubular PPy–NSA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1443–1449, 1999     

Asymmetric cyclopolymerization of N‐tert‐butyl‐N‐allylacrylamide in the presence of β‐cyclodextrin

The radical polymerization of N‐tert‐butyl‐N‐allylacrylamide (t‐BAA) was carried out in a dimethyl sulfoxide/H₂O mixture in the presence of β‐cyclodextrin (β‐CD). The polymerization proceeded with the complete cyclization of the t‐BAA unit and yielded optically active poly(t‐BAA). The IR spectrum of the obtained polymer showed that the cyclic structure in the polymer was a five‐membered ring. The optical activity of poly(t‐BAA) increased with an increasing molar ratio of β‐CD to the t‐BAA monomer. The interaction of β‐CD with t‐BAA was confirmed by ¹H NMR and ¹³C NMR analyses of the polymerization system. It is suggested that interaction of the t‐BAA monomer with the hydrophobic cavity of β‐CD plays an important role in the asymmetric cyclopolymerization of t‐BAA. The radical copolymerization of t‐BAA with styrene (St), methyl methacrylate, ethyl methacrylate, or benzyl methacrylate (BMA) also produced optically active copolymers with a cyclic structure from the t‐BAA unit. St and BMA carrying a phenyl group were predicted to compete with t‐BAA for interaction with β‐CD in the copolymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2098–2105, 2000     

A novel silk‐based segmented block copolymer containing GlyAlaGlyAla β‐sheets templated by phenoxathiin

A novel segmented block copolymer, containing polyethylene glycol segment and GlyAlaGlyAla sequence derived from B. mori silk, has been prepared as a model for silk‐based materials using both solution and interfacial techniques. Inherent viscosity, size exclusion chromatography, and light‐scattering measurements gave molecular weight between M_w 34,000–39,000. Evidence for phase separation was provided by differential scanning calorimetry, which gave two T_g's at −57 °C and 111 °C, and transmission electron microscopy, which showed a morphology in which the peptide domain, estimated to be about 20–50 nm, was dispersed in the continuous polyether phase. Solid‐state FTIR spectroscopic results showed that the polymer contained both parallel and antiparallel β‐sheet stacks, and that the solution‐polymerized material has the higher β‐sheet content. This was further confirmed by ¹³C NMR, which gave about 80% total β‐sheet content for the solution‐polymerized product and about 40% for the polymer obtained by interfacial polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 352–366, 2000     

Complex formation of cyclodextrins with poly(propylene glycol) derivatives

The complex formation between cyclodextrins (CDs) and poly(propylene glycol) (PPG) derivatives is described. β‐CD and γ‐CD formed complexes with PPG derivatives such as 1‐naphthyl (1NA), 2‐naphthyl (2NA), 3,5‐dinitrobenzoyl, and 2,4‐dinitrophenyl PPG. α‐CD did not form complexes with these PPG derivatives. Although γ‐CD gave complexes with 9‐anthryl PPG (PPG9An), β‐CD did not efficiently form complexes with PPG9An. β‐CD did not form complexes with trityl PPG, demonstrating that trityl groups were too bulky to thread a β‐CD cavity. The emission spectra of the complexes showed that β‐CD bound a single 2NA moiety in its cavity and that γ‐CD included two 2NA moieties. In contrast, γ‐CD bound a single 1NA moiety in the cavity. X‐ray diffraction studies and ¹H NMR analysis showed that the CD molecules were stacked along a PPG chain to form a channel structure. The inclusion modes are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4839–4849, 2000     

The spectrophotometric study of a fluorescence‐enhanced inclusion complex threaded with β‐cyclodextrin: Synthesis and characterization

A novel achiral monomer end‐capped with a phenyl‐[1,3,4]oxadiazolyl group and threaded through β‐cyclodextrin was synthesized to investigate the host‐guest interactions in the inclusion complex. ¹H NMR studies revealed that one or two cyclodextrin molecules were threaded onto the synthesized achiral monomer, leading to the formation of a fibrous construction of self‐assembled inclusion complexes. The formation of a self‐assembled inclusion complex was identified using SEM and TEM. The highly ordered alignment of self‐assembled supramolecules was confirmed using polarized optical microscopy. We demonstrate an easy process for the fabrication of nano‐structured self‐assembled inclusion complexes in pyridine/ethanol (1 mL/10 mL) as well as the enhancement of photo‐induced fluorescence via monomers end‐capped with a phenyl‐[1,3,4]oxadiazolyl moiety threaded with β‐cyclodextrins. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3368–3374, 2010     

Metal‐imprinted microsphere prepared by surface template polymerization and its application to chromatography

A metal ion‐imprinted microsphere was prepared by surface molecular template polymerization. Trimethylolpropane trimethacrylate (TRIM), zinc ions, 1,12‐dodecanediol‐O, O′‐diphenyl phosphonic acid (DDDPA) were used as a crosslinking agent, an imprint molecule, and a functional host molecule. The Zn(II)‐imprinted microspheres, which are spherically well‐defined particles, were prepared by using water‐in‐oil‐in‐water (W/O/W) multiple emulsions. The combination of TRIM and DDDPA serves to align the recognition sites resulting in better template sites produced on the polymer surface. We firstly conducted diagnostic zinc‐ and copper‐ion adsorption tests with the Zn(II)‐imprinted and unimprinted microspheres in order to make an assessment on the effectiveness of the molecular imprinting technique. Further, the metal‐imprinted microspheres were applied to the column operation. The separation and recovery of metals were carried out by an adsorption column packed with the Zn(II)‐imprinted microspheres. This performance was compared to that of commercial chelating resins that possess similar phosphoric functional groups. The Zn(II)‐imprinted polymer shows an extremely high selectivity to the imprinted zinc ions compared to that of the commercial chelating resin. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 689–696, 2000     

Poly(4‐acryloylmorpholine) oligomers carrying a β‐cyclodextrin residue at one terminus

A straightforward synthesis of amphiphilic β‐cyclodextrin‐poly(4‐acryloylmorpholine) (β‐CD‐PACM) polymers of controlled molecular weight, consisting of the radical polymerization of 4‐acryloylmorpholine in the presence of 6‐deoxy‐6‐mercapto‐β‐cyclodextrin (β‐CD‐SH) as chain‐transfer agent, has been established. These derivatives carry a single β‐cyclodextrin (β‐CD) moiety at one terminus and their average molecular weight is in the order of 10⁴. Thus, their β‐CD content is ～ 10% by weight. No evidence of un‐functionalized PACM was found in the final products. The chain‐transfer constant (C_T) of β‐CD‐SH was found to be 1.30 by independently determining the reaction constants of both chain‐transfer and propagation reactions. This ensures that the molecular weight, hence the β‐CD content of the polymers, does not significantly vary with conversion. These β‐CD‐PACM polymers are highly soluble in water as well as in several organic solvents such as chloroform and lower alcohols. They proved capable of solubilizing in water poorly soluble drugs such as 9‐[(2‐hydroxyethoxy)methyl]guanine (Acyclovir) and of gradually releasing them in aqueous systems. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1607–1617, 2008     

Bis(4‐nitrophenyl) phosphate as an efficient organocatalyst for ring‐opening polymerization of β‐butyrolactone leading to end‐functionalized and diblock polyesters

The ring‐opening polymerization (ROP) of β‐butyrolactone (β‐BL) has been studied using the organocatalysts of diphenyl phosphate (DPP) and bis(4‐nitrophenyl) phosphate (BNPP). The controlled ROP of β‐BL was achieved using BNPP, whereas that of using DPP was insufficient because of its low acidity. For the BNPP‐catalyzed ROP of β‐BL, the dual activation property for β‐BL and the chain‐end models of poly(β‐butyrolactone) (PBL) were confirmed by NMR measurements. The optimized polymerization condition for the ROP of β‐BL proceeded through an O‐acyl cleavage to produce the well‐defined PBLs with molecular weights up to 10,650 g mol^?1 and relatively narrow polydispersities of 1.19–1.39. Functional initiators were utilized for producing the end‐functionalized PBLs with the ethynyl, maleimide, pentafluorophenyl, methacryloyl, and styryl groups. Additionally, the diblock copolymers consisting of the PBL segment with the polyester or polycarbonate segments were prepared by the BNPP‐catalyzed ROPs of ε‐caprolactone or trimethylene carbonate without quenching. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2032–2039     

Glycopolymeric inhibitors of β‐glucuronidase I. Synthesis and polymerization of styrene derivatives having pendant D‐glucaric moieties

Two kinds of novel vinyl monomers having D ‐glucaric moieties leading to a new type of glycopolymeric inhibitors of β‐glucuronidase, N‐p‐vinylbenzyl‐6‐D ‐glucaramide (6 ) and potassium N‐p‐vinylbenzyl‐6‐D ‐glucaramid‐1‐ate (8 ), were synthesized by the reaction of D ‐glucaro‐6,3‐lactone (3 ) with p‐vinylbenzylamine (5 ) with no catalyst, and the subsequent treatment of the reaction mixture with acetic anhydride and potassium hydroxide aqueous solution, respectively. The radical copolymerization of 8 with acrylamide in various feed ratios at 60°C in 0.1 N potassium chloride aqueous solution gave water‐soluble copolymers (9 ) composed of a synthetic polymeric main chain and many pendant D ‐glucaric chains. The resulting glycopolymers (9 ) were found to inhibit the activity of β‐glucuronidase strongly through a model reaction with p‐nitrophenyl β‐D ‐glucuronide (10 ) in acetic buffer solution (pH 4.7). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 303–312, 1999     

Crystalline β‐structure of PHBV grown epitaxially on silicate layers of MMT

The poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/montmorillonite(MMT) nanocomposites were investigated by wide‐angle X‐ray scattering (WAXS). The aim of the investigation was solution intercalation of MMT with PHBV. Beside the usual orthorhombic unit cell, a stable pseudohexagonal β‐structure of PHBV was obtained. Well known β‐structure has one common WAXS reflection (d = 0.480 nm), which corresponds to the mean distance of PHBV chains in the pseudohexagonal structure. The new β‐structure has two diffraction peaks in the WAXS pattern. It is a three‐dimensionally ordered crystalline structure oriented in parallel with the silica layers of MMT. The new polymorphic form is supposed to be growing on the layers of MMT. Its layers serve as primary nucleation centers for epitaxial growth of the β‐structure. After annealing, this polymorphic form of PHBV disappears and it is transformed into the more stable α‐form leading to an enhanced total crystallinity of the polymer comprised in the nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 751–755, 2009     

Kinetics of the styrene emulsion polymerization using n‐dodecyl mercaptan as chain‐transfer agent

The kinetics of the styrene emulsion polymerization using n‐dodecyl mercaptan as chain‐transfer agent was studied. It was found that the chain‐transfer agent (CTA) had no effect on polymerization rate but substantially affected the molecular weight distribution (MWD). The efficiency of the CTA in reducing the MWD was lowered by the mass‐transfer limitations. The process variables affecting CTA mass transfer were investigated. A mathematical model for the process was developed. The outputs of the model include monomer conversion, particle diameter, number of polymer particles, and number‐average and weight‐average molecular weights. The model was validated by fitting the experimental data. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4490–4505, 2000     

Synthesis of cyclic methacrylic acid oligomers by atom transfer radical polymerization

Poly(methacrylic acid) (PMAA) oligomers were synthesized by combining template polymerization and copper‐mediated atom transfer polymerization with multivinyl monomer of β‐cyclodextrin (CD) having 20.4 methacryloyl groups on both primary and secondary hydroxyl group sides of CD scaffold, with 1,3‐dibromobutane as an initiator. The initiation and propagation sites of polymerized sequence of β‐CD were connected by postpolymerization of polymerized products with CuBr and tris[(2‐dimethylamino)ethyl]amine (Me₆TREN) in a methanol/water mixture of 10 wt % of water. Polymerized and cyclized sequences, PMAA oligomers formed on the primary and the secondary hydroxyl group sides, were detached from β‐CD scaffold by hydrolysis. Molecular weights of PMAA oligomers were measured by GPC and matrix assisted laser desorption ionization time‐of‐flight mass measurement. By ¹H NMR measurements, it was found that three types of cyclic PMAA were obtained by postpolymerization. The cyclization preferentially occurred on the secondary hydroxyl group side than on the primary hydroxyl group side. From the structures of cyclic PMAA, two reaction positions were proposed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6262–6271, 2005     

Sn(OTf)2 and Sc(OTf)3: Efficient and versatile catalysts for the controlled polymerization of lactones

A general and novel method for the controlled synthesis of aliphatic polyesters is presented. The evaluation of stannous (II) trifluoromethane sulfonate [Sn(OTf)₂] and scandium (III) trifluoromethane sulfonate [Sc(OTf)₃] as catalysts for the ring‐opening polymerization (ROP) of various lactones is described as a route to polyesters under mild and highly selective polymerization conditions. Size exclusion chromatograms of poly(ϵ‐caprolactone) initiated from ethanol in the presence of either Sn(OTf)₂ or Sc(OTf)₃ demonstrate the facile synthesis of narrowly dispersed products. Predictable molecular weights, typical of a living or controlled polymerization, were obtained with high yields. These catalysts are versatile and applicable toward the ROP of other cyclic (di)esters, including β‐butyrolactone, which produces the synthetic analogue of the biopolymer poly(β‐hydroxybutyrate). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2067–2074, 2000     

Poly(phenylsilsesquioxane)s: Structural and morphological characterization

Poly(phenylsilsesquioxane) (PPSQ) polymers that were obtained from different synthetic routes were comparatively studied. The polymers were characterized by infrared and solid‐state ²⁹Si NMR spectroscopies. According to the results of X‐ray diffraction and thermogravimetric analyses, the materials richest in silanol showed a less organized network and lower weight loss temperature. The morphology of the products was influenced by the preparation conditions. PPSQ, with a morphology rich in spherical particles, was achieved with an n‐hexadecyltrimethylammonium bromide template in the reaction medium, whereas the morphology of this polymer obtained in the absence of the template was featureless. Small‐angle X‐ray scattering analyses revealed that the PPSQ samples showed a predominance of surface‐fractal behavior. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1580–1589, 2000     

Probing into the epitaxial crystallization of β form isotactic polypropylene: From experimental observations to molecular mechanics computation

Compared with the most stable crystalline form of isotactic polypropylene (α‐iPP), β‐iPP shows superior impact strength and high temperature performance, though the mechanism of how the frustrated structure of β‐iPP is formed still remains unclear. In present work, the single crystal structure of a traditional β‐iPP nucleating agent, N,N′‐dicyclohexylterephthalamide (DCHT), was obtained for the first time and correlated with the epitaxial crystallization of β‐iPP on the surface of DCHT crystal. The combination of synchrotron radiation X‐ray microdiffraction and molecular chain packing model confirmed that a two dimensional match of chain‐axis and inter‐chain direction coexists between β‐iPP (110) plane and DCHT (001) plane. It was further found that an epitaxial model is helpful to understand the formation of the frustrated structure of 3₁ helices packing in β‐iPP. The molecular mechanics computation showed that as the (001) plane of DCHT is fixed, the packing mode of β‐iPP (110) plane on the substrate surface is more stable than that of α‐iPP (010) plane. This work clarifies the epitaxial crystallization mechanism of β‐iPP on DCHT by employing both experimental and computational evidences. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 418–424     

Organocatalysis applied to the ring‐opening polymerization of β‐lactones: A brief overview

Organocatalysis offers a number of prospects in the polymer community and presents advantages over metal based and bio‐organic methods. The use of organic molecules for performing chemical reactions is not a new concept, and any research into organocatalytic reactions builds on a respected history. Compared to the organocatalysis of large lactones, which began in the early 2000s, the examples presented here will demonstrate that few metal‐free initiating systems had been applied to β‐lactones well before the beginning of the current millennium. These metal‐free initiating systems present indisputable advantages over metal‐based processes. In the following paper, ring‐opening polymerizations (ROPs) of various β‐lactones for the preparation of poly(hydroxyalkanoate)s will be presented, as will the types of mechanisms involved, that is, zwitterionic and anionic, and cationic or supramolecular‐based ROPs. The advantages and drawbacks of the different technics will be discussed in the domain, which, for us, is important in the overall production of bioplastics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 657–672     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001