Miniemulsion polymerization of styrene using alkyl methacrylates as the reactive cosurfactant

 Stable styrene miniemulsions were prepared by using alkyl methacrylates as the reactive cosurfactant. Like conventional cosurfactants (e.g., cetyl alcohol (CA) and hexadecane (HD)), alkyl methacrylates (e.g., dodecyl methacrylate (DMA) and stearyl methacrylate (SMA)) may act as a cosurfactant in stabilizing the homogenized miniemulsions. Furthermore, the methacrylate group may be chemically incorporated into latex particles in subsequent miniemulsion polymerization. The data of the monomer droplet size, creaming rate and phase separation of monomer as a function of time were used to evaluate the shelf-life of miniemulsions stabilized by sodium dodecyl sulfate in combination with various cosurfactants. Polystyrene latex particles were produced via both monomer droplet nucleation and homogeneous nucleation in the miniemulsion polymerization using CA or DMA as the cosurfactant, with the result of a quite broad particle size distribution. On the other hand, the miniemulsion polymerization with HD or SMA showed a predominant monomer droplet nucleation. The resultant particle size distribution was relatively narrow. In miniemulsion polymerization, the less hydrophobic DMA is similar to CA, whereas the more hydrophobic SMA is similar to HD. Received: 19 November 1996 Accepted: 20 February 1997     

Styrene miniemulsion polymerization initiated by 2,2′-azobisisobutyronitrile

The effects of various parameters on the dodecyl methacrylate (DMA) or stearyl methacrylate (SMA) containing styrene miniemulsion polymerizations were investigated. These parameters include the type of initiators [2,2′-azobisisobutyronitrile (AIBN) vs. sodium persulfate (SPS)], the size of the homogenized monomer droplets, the AIBN concentration, and the SDS concentration. A small quantity of a water-insoluble dye was also incorporated into the polymerization system to study the related particle nucleation mechanisms. The oil-soluble AIBN promotes nucleation in the monomer droplets, whereas homogeneous nucleation predominates in the reaction system with the water-soluble SPS. Homogeneous nucleation, however, cannot be ruled out in the DMA or SMA containing polymerizations with AIBN as the sole initiator. Increasing the level of AIBN or SDS enhances formation of particle nuclei via homogeneous nucleation. The reaction kinetics is primarily controlled by the competitive events of monomer droplet nucleation and homogeneous nucleation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2537–2550, 1999     

A competitive particle nucleation mechanism in the polymerization of homogenized styrene emulsions

The effects of concentrations of surfactant (sodium lauryl sulfate [SLS]) and initiator (sodium persulfate [SPS]) on the polymerization of homogenized styrene emulsions, stabilized by SLS/lauryl methacrylate (LMA) or SLS/stearyl methacrylate (SMA), were studied. The rate of polymerization increases with increasing [SLS] or [SPS]. In addition to monomer droplet nucleation, the formation of particle nuclei in the aqueous phase (homogeneous nucleation) plays a crucial role in the polymerization kinetics. In comparison with the LMA containing polymerization system, monomer droplet nucleation becomes more important when the more hydrophobic SMA was used as the costabilizer. Furthermore, the degree of homogeneous nucleation increases with increasing [SPS].     

Polymerization of acrylates and bulky methacrylates with the use of zirconocene precursors: Block copolymers with methyl methacrylate

The polymerization behavior of cyclohexyl methacrylate and trimethylsilyloxyethyl methacrylate with the catalytic system Cp₂ZrMe₂/B(C₆F₅)₃/ZnEt₂ was examined. Block copolymers of these bulky methacrylates with methyl methacrylate (MMA), having high molecular weights and relatively narrow molecular weight distributions, were prepared. n‐Butyl acrylate and tert‐butyl acrylate were polymerized with various catalytic systems based on zirconocene complexes. These polymerizations seemed to proceed to a nonquantitative yield, producing polymers with high molecular weights and relatively low polydispersities. This behavior indicated the presence of termination reactions in the initiation step, which appeared to be faster than the propagation step. Block copolymers of these acrylates with MMA were synthesized with the catalytic system rac‐Et(Ind)₂ZrMe₂/[B(C₆F₅)₄]⁻[Me₂NHPh]⁺/ZnEt₂, starting from the polymerization of MMA. The block copolymers produced were well defined in most cases, as indicated by size exclusion chromatography, NMR, and differential scanning calorimetry measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3337–3348, 2005     

Stereospecific polymerization of methacrylates by metallocene and related catalysts

Stereospecific—isospecific, syndiospecific, and diastereospecific—polymerizations of methacrylates using group 4 metallocene and related catalysts produce polymethacrylates with controlled stereo‐microstructures. The versatility and stereospecificity of these cat‐ alysts for methyl methacrylate polymerization were demonstrated not only in solution‐phase polymerization, but also in polymerizations on silica surfaces and inside silicate nanogalleries. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3395–3403, 2004     

Stereocontrol in the free‐radical polymerization of methacrylates with fluoroalcohols

The free‐radical polymerization of methyl methacrylate (MMA), ethyl methacrylate (EMA), isopropyl methacrylate (IPMA), and tert‐butyl methacrylate (t‐BuMA) was carried out under various conditions to achieve stereoregulation. In the MMA polymerization, syndiotactic specificity was enhanced by the use of fluoroalcohols, including (CF₃)₃COH as a solvent or an additive. The polymerization of MMA in (CF₃)₃COH at −98 °C achieved the highest syndiotacticity (rr = 93%) for the radical polymerization of methacrylates. Similar effects of fluoroalcohols enhancing syndiotactic specificity were also observed in the polymerization of EMA, whereas the effect was negligible in the IPMA polymerization. In contrast to the polymerizations of MMA and EMA, syndiotactic specificity was decreased by the use of (CF₃)₃COH in the t‐BuMA polymerization. The stereoeffects of fluoroalcohols seemed to be due to the hydrogen‐bonding interaction of the alcohols with monomers and growing species. The interaction was confirmed by NMR measurements. In addition, in the bulk polymerization of MMA at −78 °C, syndiotactic specificity and polymer yield increased even in the presence of a small amount {[(CF₃)₃COH]/[MMA]_o < 1} of (CF₃)₃COH. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4693–4703, 2000     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Synthesis and polymerizations of six aminophosphonate‐containing methacrylates

Two different groups of novel aminophosphonate‐containing methacrylates were synthesized. The route to the first group involves reactions of ethyl α‐bromomethacryate (EBBr) and t‐butyl α‐bromomethacryate (TBBr) with diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate. Bulk and solution polymerizations at 60–80 °C with 2,2′‐azobis(isobutyronitrile) (AIBN) gave crosslinked or soluble polymers depending on monomer structure and polymerization conditions. Increasing bulkiness from ethyl to t‐butyl decreases the polymerization rate, correlated well with the chemical shift differences of double bond carbons and consistent with the lower molecular weights of t‐butyl ester polymers (M_n = 1800–7900 vs. 50,000–72,000). The route to the second group involves the Michael addition reaction between diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate with 3‐(acryloyloxy)‐2‐hydroxypropyl methacrylate (AHM) to give secondary amines. The photopolymerization using differential scanning calorimeter showed that these monomers have similar or higher reactivities than AHM, even though AHM has two double bonds. The high rates of polymerization of these monomers were attributed to both hydrogen bonding interactions due to additional NH groups as well as chain transfer reactions. All the homopolymers obtained produced char (17–35%) on combustion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Viscosity effects in cobaloxime‐mediated catalytic chain‐transfer polymerization of methacrylates

The effect of bulk viscosity on the cobaloxime‐mediated catalytic chain‐transfer polymerization of methacrylates at 60 °C was investigated by both the addition of high molecular weight poly(methyl methacrylate) to methyl methacrylate polymerization and the dilution of benzyl methacrylate polymerization by toluene. The results indicate that the bulk viscosity is not directly linked to the chain‐transfer activity. The previously measured relationship between chain‐transfer‐rate coefficient and monomer viscosity therefore probably reflects changes at the molecular level. However, the results in this article do not necessarily disprove a diffusion‐controlled reaction rate because cobaloxime diffusion is expected to scale with the monomer friction coefficient rather than bulk viscosity. Considering the published data, to date we are not able to distinguish between a diffusion‐controlled reaction rate or a mechanism directly affected by the methacrylate substituent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 782–792, 2002; DOI 10.1002/pola.10152     

Visible light‐induced RAFT polymerization of methacrylates with benzaldehyde derivatives as organophotoredox catalysts

The benzaldehyde derivatives, such as 2,4‐dimethoxy benzaldehyde (PC1) and p‐anisaldehyde (PC2), were successfully used as photoredox catalysts (PCs) in combination with typical RAFT agent 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoic acid (CTP) for the controlled photoinduced electron transfer RAFT polymerization (PET‐RAFT) of methyl methacrylate (MMA) and benzyl methacrylate (BnMA) at room temperature. The kinetics of the polymerizations showed first order with respect to monomer conversions. Besides, the average number molecular weights (M_n) of the produced polymers increased linearly with the monomer conversions and kept relatively narrow polydispersity (PDI = M_w/M_n). For example, the M_n of PMMA increased from about 3400 to 17,300 g mol⁻¹ with the increasing in monomer conversion from 11% to 85%, and the PDI maintained around 1.36. The living features of polymerizations with the PC1 and PC2 as catalysts have also been further supported by chain extension and synthesis of PMMA‐b‐PBnMA diblock copolymer. As a result, the simplicity and efficiency of benzaldehyde derivatives catalyzed PET‐RAFT polymerization have been demonstrated under mild conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 229–236     

Kinetics of the microemulsion polymerization of styrene with short‐chain alcohols as the cosurfactant

The kinetics of styrene microemulsion polymerization stabilized by sodium dodecyl sulfate (SDS) and a series of short‐chain alcohols (n‐C_iH_2i+1OH, abbreviated as C_iOH, where i = 4, 5, or 6) at 60 °C was investigated. Sodium persulfate was used as the initiator. The microemulsion polymerization process can be divided into two intervals: the polymerization rate (R_p) first increases to a maximum at about a 20% conversion (interval I) and thereafter continues to decrease toward the end of the polymerization (interval II). For all the SDS/C_iOH‐stabilized polymerization systems, R_p increases when the initiator or monomer concentration increases. The average number of free radicals per particle is smaller than 0.5. The molecular weight of the polymer produced is primarily controlled by the chain‐transfer reaction. In general, the reaction kinetics for the polymerization system with C₄OH as the cosurfactant behaves quite differently from the kinetics of the C₅OH and C₆OH counterparts. This is closely related to the different water solubilities of these short‐chain alcohols and the different concentrations of the cosurfactants used in the preparation of the microemulsion. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 898–912, 2001     

Emulsion and controlled miniemulsion polymerization of the renewable monomer γ‐methyl‐α‐methylene‐γ‐butyrolactone

The kinetics of free‐radical emulsion polymerization of γ‐methyl‐α‐methylene‐γ‐butyrolactone (MeMBL), a renewable monomer related to methyl methacrylate, are presented in detail for the first time, and stable polymer latices are prepared. The effects of different reaction parameters on free‐radical emulsion polymerization of MeMBL are presented. Homogeneous nucleation is asserted to be the dominant path for particle formation. Miniemulsion copolymerization of MeMBL and styrene is also reported. In this case, the homogeneous nucleation process appears limited when using an oil soluble initiator. Both the RAFT miniemulsion polymerizations and RAFT bulk polymerizations are well controlled and narrow polydispersity copolymers are produced. Rate retardation is observed in the RAFT miniemulsion polymerizations compared with the free‐radical polymerization and RAFT bulk polymerizations and the possible causes of the retardation are discussed. The reactivity ratios of MeMBL and styrene in RAFT bulk copolymerization are also determined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5929–5944, 2008     

Controlled radical polymerization of fluorinated methacrylates in supercritical CO2: Synthesis and application of a novel RAFT agent

A novel fluorinated reversible addition‐fragmentation chain transfer agent, S,S‐di‐pentaflourobenzyl trithiocarbonate (DPFBTTC), was designed and synthesized. DPFBTTC and dibenzyl trithiocarbonate (DBTTC) were applied in the polymerization of dodecafluoroheptyl methacrylate (DFHMA), hexafluorobutyl methacrylate (HFBMA), and trifluoroethyl methacrylate (TFEMA) in scCO₂. The polymerization processes were monitored using a high‐pressure in‐situ NIR, through which the polymerization kinetics was investigated and the controllability of DPFBTTC was evaluated. It is found that the controllability of DPFBTTC presented in the order of DFHMA > HFBMA > TFEMA, indicating that DPFBTTC may fit for the controlled polymerization of the highly fluorinated methacrylates. Moreover, the controllability of DPFBTTC is verified to be better than that of DBTTC, possibly resulting from the enhanced accessibility/miscibility of DPFBTTC to the fluorinated monomer used. We believe that the employment of DPFBTTC and the resulted introduction of stable pentafluorobenzyl end groups to the polymer are expected to distinctly improve performances of the polymer, and thus will meet the special application requirements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 825–834     

Seeded semicontinuous emulsion copolymerization of methyl methacrylate,butyl acrylate,and phosphonated methacrylates: Kinetics and morphology

A series of methyl methacrylate, butyl acrylate, and phosphonated methacrylate (MAPHOS) copolymers were prepared by seeded semicontinuous emulsion polymerization under monomer‐starved conditions by varying the amount and nature of phosphonated methacrylates (diester, monoacid, and diacid). The effects on the kinetics, molecular weight distribution, and particle size distribution were investigated. The molecular weights and particle growth were affected by the amount of acidic MAPHOS in the recipe. Secondary nucleation occurred above a critical concentration of acidic MAPHOS (5 wt %). Characterization of the latices by elemental analysis provided information on the phosphonic acid location and showed that phosphonic oligomers were formed in the aqueous phase. Particle size data and electrophoretic behavior of the latex afforded a discussion on the particle surface morphology. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2469–2480, 2003     

Miniemulsion polymerization of styrene with a block copolymer surfactant

A series of miniemulsion systems based on styrene/azobisisobutyronitrile in the presence of poly(methyl methacrylate‐b‐2‐(dimethylamino)ethyl methacrylate) as a surfactant and hexadecane (HD) as a cosurfactant were developed. For comparison, a series of pseudoconventional emulsions also were carried out with the same procedure used for the aforementioned series but without the cosurfactant (HD). Both the droplet size and shelf life were also measured. Experimental results indicate that it is possible to slow the effect of Ostwald ripening and thereby produce a stable miniemulsion with the block copolymer as the surfactant and HD as the cosurfactant. In addition, the extent to which varying the surfactant concentration and copolymer composition could affect both the polymer particle size during the polymerization and the polymerization rate was examined. Variation in the polymer particle sizes during polymerization indicates that droplet and aqueous (micellar or both homogeneous) nucleation occurs in the miniemulsion polymerization. With the same concentration of the surfactant used in the miniemulsion polymerization, the polymerization rates of systems with M₁₂B₃₆ are faster than those of systems with M₁₂B₁₂. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1818–1827, 2000     

Microemulsion polymerization of styrene stabilized by sodium dodecyl sulfate and short‐chain alcohols

Styrene microemulsion polymerizations with different short‐chain alcohols [n‐C_iH_2i+1OH (C_iOH), where i = 4, 5, or 6] as the cosurfactant were investigated. Sodium dodecyl sulfate and sodium persulfate (SPS) were used as the surfactant and initiator, respectively. The desorption of free radicals out of latex particles played an important role in the polymerization kinetics. An Arrhenius expression for the radical desorption rate coefficient was obtained from the polymerizations at temperatures of 50–70 °C. The polymerization kinetics were not very sensitive to the alkyl chain length of alcohols compared with the temperature effect. The maximal polymerization rate in decreasing order was C₆OH > C₄OH > C₅OH. This was related to the differences in the water solubility of C_iOH and the structure of the oil–water interface. The feasibility of using a water‐insoluble dye to study the particle nucleation mechanisms was also evaluated. The parameters chosen for the study of the particle nucleation mechanisms include the cosurfactant type (C_iOH), the SPS concentration, and the initiator type (oil‐soluble 2,2′‐azobisisobutyronitrile versus water‐soluble SPS). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3199–3210, 2001     

Micellar nucleation differential microemulsion polymerization

Polymer nanoparticles within the range of 2–5 nm with a solid content of more than 13 wt.% and a narrow molecular weight polydispersity (Mw/Mn ∼ 1.1) were for the first time prepared using a micellar nucleation differential microemulsion polymerization system emulsified by sodium dodecyl sulfate (SDS), with SDS/monomer (methyl methacrylate) and SDS/H₂O weight ratios of up to 1:16 and 1:100, respectively. It was found that for benzoyl peroxide (BPO), micellar nucleation is more favorable for the synthesis of smaller polymer nanoparticles than ammonium persulfate (APS) which gives rise to homogeneous nucleation and 2,2′-azobisisobutyronitrile (AIBN) which involves partially heterogeneous nucleation. In the polymerization process, there exists a critical stability concentration (CSC) of SDS, above which the size of the nanoparticles is to be minimized and stabilized. With an increase in the monomer addition rate, the polymerization system changes from a microemulsion system to an emulsion system. A mechanism was proposed to describe the micellar nucleation process of differential microemulsion polymerization. This study may contribute to the development of fine polymer nanoparticles for drug delivery systems.     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Stereocontrol during the free‐radical polymerization of methacrylates with Lewis acids

The free‐radical polymerizations of methyl methacrylate (MMA), ethyl methacrylate, isopropyl methacrylate, and 2‐methoxyethyl methacrylate were carried out in the presence of various Lewis acids. The MMA polymerization in the presence of scandium trifluoromethanesulfonate [Sc(OTf)₃] in toluene or CHCl₃ produced a polymer with a higher isotacticity and heterotacticity than that produced in the absence of Sc(OTf)₃. Similar effects were observed during the polymerization of the other monomers. ScCl₃, Yb(OTf)₃, Er(OTf)₃, HfCl₄, HfBr₄, and In(OTf)₃ also increased the isotacticity and heterotacticity of the polymers. The effects of the Lewis acids were greater in a solvent with a lower polarity and were negligible in tetrahydrofuran and N,N‐dimethylformamide. Sc(OTf)₃ was also found to accelerate the polymerization of MMA. On the basis of an NMR analysis of a mixture of Sc(OTf)₃, MMA, and poly(methyl methacrylate), the monomer–Sc(OTf)₃ interaction seems to be involved in the stereochemical mechanism of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1463–1471, 2001     

Development of reactive phosphonated methacrylates

Five novel phosphonated mono‐ and dimethacrylate monomers have been synthesized by two different routes. Monomers 1 and 2 were synthesized by reactions of methacryloyl chloride with diethyl (2‐hydroxyphenyl) phosphonate or tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) bisphosphonate; monomers 3 and 4 by reactions of α‐(chloromethyl)acryloyl chloride (CMAC) first with dimethyl (2‐hydroxyethyl) phosphonate and then with benzoic or formic acids. The reaction of CMAC with two moles of dimethyl (2‐hydroxyethyl) phosphonate gave monomer 5 . Thermal homopolymerization of monomers 1 , 3 , 4 , and 5 and copolymerization of monomer 1 with methyl methacrylate (MMA) were investigated using azobisisobutyronitrile (AIBN) at 60 °C. Glass transition temperatures were observed for poly‐ 1 , poly(MMA‐co‐ 1 ) (50:50), poly(MMA‐co‐ 1 ) (90:10), PMMA, poly‐ 3 , and poly‐ 5 at 52, 90, 99, 129, 50, and 70 °C, respectively. TGA analysis of these polymers indicated formation of char on combustion. Homo‐ and/or copolymerization behavior of the synthesized monomers with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) were investigated with photodifferential scanning calorimetry. The maximum rate of polymerizations decreased in the following order: Bis‐GMA～ 3 > 1 > 4 > 5 . The conversions of monomers 1 , 3 , 4 , and 5 (73.9, 85.9, 98.2, and 62.2%) were very high compared with Bis‐GMA (40.5%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5737–5746, 2009