Synthesis,Crystal Structure and Hydrolysis of a Novel Anhydrogalactosucrose: 2′‐Methoxyl‐O‐1′,4′:3′,6′‐dianhydro‐β‐D‐fructofuranosyl 3,6‐anhydro‐4‐chloro‐4‐deoxy‐α‐D‐galactopyranoside

A novel anhydrogalactosucrose derivative 2′‐methoxyl‐O‐1′,4′:3′,6′‐dianhydro‐β‐D‐fructofuranosyl 3,6‐anhydro‐4‐chloro‐4‐deoxy‐α‐D‐galactopyranoside ( 4 ) was prepared from 3,6:1′,4′:3′,6′‐trianhydro‐4‐chloro‐4‐deoxy‐galactosucrose ( 3 ) via a facile method and characterized by ¹H NMR, ¹³C NMR and 2D NMR spectra. The single crystal X‐ray diffraction analysis shows that the title molecule forms a two thee‐dimensional network structure by two kinds of hydrogen bond interactions [O(2) H(2)···O(7), O(5) H(5)···O(8)]. Its stability was investigated by acid hydrolysis reaction treated with sulfuric acid, together with the formation of 1,6‐Di‐O‐methoxy‐4‐chloro‐4‐deoxy‐β‐D‐galactopyranose ( 5 ) and 2,2‐Di‐C‐methoxy‐1,4:3,6‐dianhydromannitol ( 6 ). According to the result, the relative stability of the ether bonds in the structure is in the order: C(1) O C(5)≈C(3′) O C(6′)≈C(1′) O C(4′)>C(3) O C(6)≈C(1) O C(2′)>C(2′) O C(5′).     

Crystal and molecular structures of atropisomeric N‐aryl‐1,2,3,4‐tetrahydro‐3,3‐dimethyl‐2,4‐quinolinediones

The crystal structures of N‐aryl‐1,2,3,4‐tetrahydro‐3,3‐dimethyl‐2,4‐quinolinediones bearing methoxy‐ ( 1 ), methyl‐ ( 2 ), and chloro‐ ( 3 ) substituents in 2′‐position of the phenyl ring have been determined by X‐ray crystal structure analysis. The heterocyclic ring in 1–3 adopts an envelope conformation, with the smallest ring puckering in the ortho‐chloro derivative 3 . The N‐aryl ring is almost perpendicular with respect to the quinoline‐2,4‐dione ring. The corresponding dihedral angle values are 83.2(1)°, 80.0(9)°, and 83.4(2)° in 1, 2 and 3 , respectively. The hydrogen bond of C H⋅⋅⋅O type joins the molecules of the ortho‐methoxy derivative 1 into dimers. The supramolecular structure also contains two C H⋅⋅⋅π interactions that link the hydrogen‐bonded dimers into sheets. In ortho‐methyl derivative 2 , one C H⋅⋅⋅π interaction generates infinite chains, whereas two C H⋅⋅⋅O hydrogen bonds and three C H⋅⋅⋅π interactions in the ortho‐chloro derivative 3 form three‐dimensional framework. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:325–331, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20436     

A new method for the synthesis of dinaphtho[1,2‐b;2′,1′‐d]thiophenes and selenophenes

Naphthalene‐1‐sulfonic acid dimethylamides were treated with n‐BuLi and elemental sulfur or selenium to afford dinaphtho[1,2‐b:2′,1′‐d]thiophenes and selenophenes, respectively. This is the first example of making two C S/Se bonds and a C C bond in a single step at room temperature and also demonstrates a useful method for the synthesis of both thiophenes and selenophenes on naphthalene. In the case of the reactions of elemental selenium, diselenides were also obtained along with dinaphtho[1,2‐b:2′,1′‐d]selenophenes. The structure of dinaphtho[1,2‐b:′,1′‐d]thiophene was characterized by X‐ray crystallography as a representative molecule. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:239–248, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20291     

Hydrogen‐bonded structures of the isomeric compounds of quinoline with 2‐chloro‐5‐nitrobenzoic acid, 3‐chloro‐2‐nitrobenzoic acid, 4‐chloro‐2‐nitrobenzoic acid and 5‐chloro‐2‐nitrobenzoic acid

The structures of four isomeric compounds, all C₇H₄ClNO₄·C₉H₇N, of quinoline with chloro‐ and nitro‐substituted benzoic acid, namely, 2‐chloro‐5‐nitrobenzoic acid–quinoline (1/1), (I), 3‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (II), 4‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (III), and 5‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (IV), have been determined at 185 K. In each compound, a short hydrogen bond is observed between the pyridine N atom and a carboxyl O atom. The N...O distances are 2.6476 (13), 2.5610 (13), 2.5569 (12) and 2.5429 (12) Å for (I), (II), (III) and (IV), respectively. Although in (I) the H atom in the hydrogen bond is located at the O site, in (II), (III) and (IV) the H atom is disordered in the hydrogen bond over two positions with (N site):(O site) occupancies of 0.39 (3):0.61 (3), 0.47 (3):0.53 (3) and 0.65 (3):0.35 (3), respectively.     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Synthesis and Crystal Structure of Peptide‐2,2′‐Biphenyl Hybrids

1,1′‐Biphenyl derivatives with amino acid/peptide substitution at C(2) and C(2′) (‘peptide‐biphenyl hybrids', 6 – 8 ) have been prepared by direct N‐acylation of amino acid/peptide derivatives with 1,1′‐biphenyl‐2,2′‐dicarbonyl dichloride ( 5 ). Both conformers, which arise from the rotation around the aryl aryl bond, have been detected by ¹H‐NMR spectroscopy. Single atropisomers of each 6 ((R)‐configuration at the stereogenic axis) and 7 ((S)‐configuration at the stereogenic axis) have been obtained in quantitative yield by slow evaporation of methanolic solutions. The procedures are dynamic atropselective resolutions (asymmetric transformations of the second kind). The crystal structures of the peptide‐biphenyl hybrids 6 and 7 show highly ordered molecular and supramolecular structures with extensive intramolecular and intermolecular H‐bonding.     

4‐Fluoro‐2‐(phospho­no­methyl)­benzene­sulfonic acid monohydrate

The title compound, C₇H₈FO₆PS·H₂O, contains both phospho­nic and sulfonic acid functionalities. An extensive network of O—H?O hydrogen bonds is present in the crystal structure. The three acidic protons are associated with the phospho­nate group. Two protons experience typical hydrogen‐bond contacts with the sulfonate‐O atoms, while the third has a longer covalent bond of 1.05 (3) Å to the phospho­nate‐O atom and a short hydrogen‐bond contact of 1.38 (3) Å to the water O atom (all O—H?O angles are in the range 162–175°). The sulfonate group is positioned so that one S—O bond is nearly coplanar with the phenyl ring [torsion angle O—S—C—C ?8.6 (2)°]. The phospho­nate group is oriented approximately perpendicular to the ring [torsion angle P—C—C—C 99.2 (2)°] with one P—O bond anti to the benzyl C—C bond. The mol­ecules pack in layers in the b–c plane with the water mol­ecules in between adjacent pairs of inverted layers.     

Copper‐Catalyzed Regioselective Cascade Alkylation and Cyclocondensation of Quinoline N‐Oxides with Diazo Esters: Direct Access to Conjugated π‐Systems

An inexpensive copper‐catalyzed cascade regioselective alkylation, followed by cyclocondensation of quinoline N‐oxides with α‐diazo esters has been achieved successfully to provide heteroarene‐containing conjugated π‐systems. The developed method is simple, straightforward, and economical with a broad range of substrate scope. The dual role of copper catalyst in the C?H bond functionalization and in Lewis acid‐promoted cyclization was explored.     

1,7‐Dideaza‐2′‐deoxy‐6‐nitronebularine: a pyrrolo[2,3‐b]pyridine nucleoside with an intramolecular hydrogen bond stabilizing the syn conformation

The title compound [systematic name: 1‐(2‐deoxy‐β‐D‐erythro‐pentofuranosyl)‐4‐nitro‐1H‐pyrrolo[2,3‐b]pyridine], C₁₂H₁₃N₃O₅, forms an intramolecular hydrogen bond between the pyridine N atom as acceptor and the 5′‐hydroxy group of the sugar residue as donor. Consequently, the N‐glycosylic bond exhibits a syn conformation, with a χ torsion angle of 61.6 (2)°, and the pentofuranosyl residue adopts a C2′‐endo envelope conformation (²E, S‐type), with P = 162.1 (1)° and τ_m = 36.2 (1)°. The orientation of the exocyclic C4′—C5′ bond is +sc (gauche, gauche), with a torsion angle γ = 49.1 (2)°. The title nucleoside forms an ordered and stacked three‐dimensional network. The pyrrole ring of one layer faces the pyridine ring of an adjacent layer. Additionally, intermolecular O—H...O and C—H...O hydrogen bonds stabilize the crystal structure.     

An efficient synthesis and crystal structure of novel 1‐oxo‐2‐propyl‐4‐(substituted)phenylimino‐1,2,3,4,5,6,7,8‐octahydro[1,4,3]thiazaphosphorino[4,3‐a][1,3,2]benzodiazaphosphorine 3‐oxides

A series of 1‐oxo‐2‐propyl‐4‐(substituted)phenylimino‐1,2,3,4,5,6,7,8‐octahydro‐[1,4,3]thiazaphosphorino[4,3‐a][1,3,2]benzodiazaphosphorine 3‐oxides ( 5a–g ) has been synthesized in excellent yields via the reaction of 1‐(2‐bromoethyl)‐2,3‐dihydro‐3‐propyl‐1,3,2‐benzodiazaphosphorin‐4(1H)‐one 2‐oxide with (substituted) phenyl isothiocyanates, which contain the proximate imino and phosphoryl groups in the fused heterocycle. The structures of all of the new compounds were confirmed by spectroscopic methods and microanalyses. The results from X‐ray crystallography analysis of 5a showed that the proximate imino and phosphoryl groups are not coplanar due to their being jointly located in the fused heterocycle, thus having ring tension, and this then destroys the conjugation between the CN and the PO moieties. As a result, the length of the P C bond, measured as 1.8285(18) Å, is just the same as that of a P C bond not involved in conjugation (1.80–1.85 Å). Also, the C(1), C(2), S(1), C(3), P(1), and N(2) atoms of the [1,4,3]thiazaphosphorino moiety exist preferably in the boat conformation. The coplanar C(1), N(2), C(3), and S(1) atoms, within an average deviation of 0.0564 Å, form the ground floor of the boat conformation, whereas, the P(1) and C(2) atoms are on the same side of the coplanar structure with the distance of 0.7729 Å and 0.7621 Å, respectively. On the other hand, around the CN double bond, the P(1) C(3) bond and the N(1) C(11) bond are in a trans relationship because of the repulsive action of the n‐propyl group in the 2‐position of the title compound. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:599–610, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10041     

1‐Methyl‐1H‐imidazo[4,5‐f]quinolin‐6‐ium chloride monohydrate

The title compound, C₁₁H₁₀N₃⁺·Cl^?·H₂O, belongs to the N1‐methyl‐substituted imidazo­[4,5‐f]­quinoline family, in which the heterocyclic ring is protonated at the pyridine rather than at the imidazole N atom. The mol­ecule as a whole is almost exactly planar. The molecular structure has been compared with that of the 2‐amino analogue described in the literature, and it was found that the extra amino group of the latter is involved in conjugation with the adjacent double bond, i.e. the conjugation does not extend over the entire heterocyclic system. The cation of the title compound forms a strong hydrogen bond with the Cl^? anion and the anions are interconnected by the water solvent mol­ecule.     

Reductive C2‐Alkylation of Pyridine and Quinoline N‐Oxides Using Wittig Reagents

The ability to alkylate pyridines and quinolines is important for their further development as pharmaceuticals and agrochemicals, and for other purposes. Herein we describe the unprecedented reductive alkylation of pyridine and quinoline N‐oxides using Wittig reagents. A wide range of pyridine and quinoline N‐oxides were converted into C2‐alkylated pyridines and quinolines with excellent site selectivity and functional‐group compatibility. Sequential C?H functionalization reactions of pyridine and quinoline N‐oxides highlight the utility of the developed method. Detailed labeling experiments were performed to elucidate the mechanism of this process.     

Synthesis and characterization of new soluble polyamides from 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane and various diamines

A new dicarboxylic acid monomer, 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane, bearing a pendent tert‐butylcyclohexylidene group was prepared in three steps from 4‐tert‐butylcyclohexanone. The monomer was reacted with various diamines to produce a series of new polyamides with triphenyl phosphite and pyridine as condensing agents. These polyamides were produced with inherent viscosities of 0.74 to 1.02 dL g⁻¹. All the polymers were characterized by X‐ray diffraction that revealed this amorphous nature. These polymers exhibited excellent solubility in a variety of solvents. Almost all the polymers could be dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, dimethyl sulfoxide, pyridine, and even in tetrahydrofuran and cyclohexanone. These polymers showed glass‐transition temperatures between 223 and 256 °C and decomposition temperatures at 10% weight loss ranging from 468 to 491 °C and 469 to 498 °C in nitrogen and air atmospheres, respectively. Transparent, tough, and flexible films of these polymers were cast from the DMAc solutions. These polymer films had tensile strengths ranging from 76 to 99 MPa, elongations at break from 7 to 19%, and initial moduli from 2.1 to 2.7 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 797–803, 2000     

Sulfonic acids as water‐soluble initiators for cationic polymerization in aqueous media with Yb(OTf)3

Aqueous sulfonic acids (HOSO₂R; R = CH₃, Ph‐p‐CH₃, and Ph‐p‐NO₂), coupled with a water‐tolerant Lewis acid, ytterbium triflate [Yb(OTf)₃; OTf =  OSO₂CF₃], initiate the cationic suspension polymerization of p‐methoxystyrene (pMOS) in heterogeneous aqueous media. They induce controlled polymerization of pMOS at 30 °C, and the molecular weights of the polymers (weight‐average molecular weight/number‐average molecular weight ∼ 1.7) increase with conversion. These suspension polymerizations are initiated by the entry of sulfonic acid from the aqueous phase into the organic phase and proceed via reversible activation of the sulfonyl terminus by the Lewis acid. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2728–2733, 2000     

Enzyme‐Mediated Preparation of (+)‐ and (−)‐β‐Irone and (+)‐ and (−)‐cis‐γ‐Irone from Irone alpha®

The (−)‐ and (+)‐β‐irones ((−)‐ and (+)‐ 2 , resp.), contaminated with ca. 7 – 9% of the (+)‐ and (−)‐trans‐α‐isomer, respectively, were obtained from racemic α‐irone via the 2,6‐trans‐epoxide (±)‐ 4 (Scheme 2). Relevant steps in the sequence were the LiAlH₄ reduction of the latter, to provide the diastereoisomeric‐4,5‐dihydro‐5‐hydroxy‐trans‐α‐irols (±)‐ 6 and (±)‐ 7 , resolved into the enantiomers by lipase‐PS‐mediated acetylation with vinyl acetate. The enantiomerically pure allylic acetate esters (+)‐ and (−)‐ 8 and (+)‐ and (−)‐ 9 , upon treatment with POCl₃/pyridine, were converted to the β‐irol acetate derivatives (+)‐ and (−)‐ 10 , and (+)‐ and (−)‐ 11 , respectively, eventually providing the desired ketones (+)‐ and (−)‐ 2 by base hydrolysis and MnO₂ oxidation. The 2,6‐cis‐epoxide (±)‐ 5 provided the 4,5‐dihydro‐4‐hydroxy‐cis‐α‐irols (±)‐ 13 and (±)‐ 14 in a 3 : 1 mixture with the isomeric 5‐hydroxy derivatives (±)‐ 15 and (±)‐ 16 on hydride treatment (Scheme 1). The POCl₃/pyridine treatment of the enantiomerically pure allylic acetate esters, obtained by enzymic resolution of (±)‐ 13 and (±)‐ 14 , provided enantiomerically pure cis‐α‐irol acetate esters, from which ketones (+)‐ and (−)‐ 22 were prepared (Scheme 4). The same materials were obtained from the (9S) alcohols (+)‐ 13 and (−)‐ 14 , treated first with MnO₂, then with POCl₃/pyridine (Scheme 4). Conversely, the dehydration with POCl₃/pyridine of the enantiomerically pure 2,6‐cis‐5‐hydroxy derivatives obtained from (±)‐ 15 and (±)‐ 16 gave rise to a mixture in which the γ‐irol acetates 25a and 25b and 26a and 26b prevailed over the α‐ and β‐isomers (Scheme 5). The (+)‐ and (−)‐cis‐γ‐irones ((+)‐ and (−)‐ 3 , resp.) were obtained from the latter mixture by a sequence involving as the key step the photochemical isomerization of the α‐double bond to the γ‐double bond. External panel olfactory evaluation assigned to (+)‐β‐irone ((+)‐ 2 ) and to (−)‐cis‐γ‐irone ((−)‐ 3 ) the strongest character and the possibility to be used as dry‐down note.     

Theoretical analysis of fluoroglycine conformers

Seven different optimized conformers of α‐fluoroglycine (H₂NCHFCOOH) were obtained from ab initio calculations. Some of these conformers are exceptionally stable compared to similar conformers of glycine. Conformers in which the lone pair of electrons on the nitrogen atom are antiperiplanar to the C F bond are more stable than conformers that do not have such an arrangement. The stability difference between conformers with such an arrangement and conformers that have the lone pair of electrons synperiplanar to the C F bond is about 27 kJ/mol (calculated at the MP2/6‐31+G* level). Conformers that have the lone pair of electrons antiperiplanar to the C F bond possess a longer C F bond, a shorter C N bond, and sp²‐like amino bond angles. For some conformers an unusual hydrogen bond involving the acidic carboxylic acid hydrogen and the electronegative fluorine atom is observed. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 426–431, 2000     

The E and Z isomers of 3‐(benzoxazol‐2‐yl)­prop‐2‐enoic acid

The carboxyl­ic acid group and the double bond are coplanar in (E)‐3‐(benzoxazol‐2‐yl)­prop‐2‐enoic acid, C₁₀H₇NO₃, whereas in isomeric (Z)‐3‐(benzoxazol‐2‐yl)­prop‐2‐enoic acid, also C₁₀H₇NO₃, they are almost orthogonal. In both isomers, a strong O—H⋯N hydrogen bond, with the carboxyl­ic acid group as a donor and the pyridine‐like N atom as an acceptor, and weak C—H⋯O interactions contribute to the observed supramolecular structures, which are completed by π–π stacking interactions between oxazole and benzenoid rings.     

New quinoline‐2, ‐3, and 4‐yl‐(amino) methylphosphonates: Synthesis and study on the C?P bond cleavage in quinoline‐2 and ‐4 derivatives under acidic conditions

Synthesis of new quinoline‐(amino)methylphosphonic acids, their phosphonate esters, and phosphine oxides is presented. The desired new compounds were efficiently obtained by nucleophilic addition of phosphorous species to quinoline‐derived Schiff bases. In addition, it was discovered that heating of quinolin‐2 and quinolin‐4‐yl‐(amino)‐methylphosphonates with aqueous HCl leads to their decomposition resulting in a rupture of the C P bond, rejecting of the phosphorus containing fragment, and formation of the corresponding secondary quinoline‐2 and quinoline‐4‐alkylamines. Two alternative mechanistic pathways for this cleavage are postulated. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:617–624, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20704     

Hydro­gen bonding in proton‐transfer compounds of 8‐quinolinol (oxine) with aromatic sulfonic acids

The crystal structures of the proton‐transfer compounds of 8‐quinolinol (oxine) with the aromatic sulfonic acids 2‐amino­benzene­sulfonic acid (orthanilic acid) and 8‐hydroxy‐7‐iodo­quinoline‐5‐sulfonic acid (ferron) have been determined. In both 8‐hydroxy­quinolinium 2‐amino­benzene­sulfonate, C₉H₈NO⁺·C₆H₆NO₃S⁻, (I), and 8‐hydroxyquino­linium 8‐hydroxy‐7‐iodo­quinoline‐5‐sulfonate ses­qui­hydrate, C₉H₈NO⁺·C₉H₆INO₄S⁻·1.5H₂O, (II), extensive hydrogen‐bonding interactions, together with significant cation–cation [in (I)] and cation–anion [in (II)] π–π stacking associations, give rise to layered polymer structures.     

Iron‐Catalyzed Cross‐Coupling of Alkenyl Acetates

Stable C O linkages are generally unreactive in cross‐coupling reactions which mostly employ more electrophilic halides or activated esters (triflates, tosylates). Acetates are cheap and easily accessible electrophiles but have not been used in cross‐couplings because the strong C O bond and high propensity to engage in unwanted acetylation and deprotonation. Reported herein is a selective iron‐catalyzed cross‐coupling of diverse alkenyl acetates, and it operates under mild reaction conditions (0 °C, 2 h) with a ligand‐free catalyst (1–2 mol %).