Molecular deformation mechanisms of isotactic polypropylene in α‐ and β‐crystal forms by FTIR spectroscopy

The orientation behavior of isotactic polypropylene (iPP) in α‐ and β‐crystal form was investigated by rheo‐optical Fourier transformed infrared (FTIR) spectroscopy. This method enabled quantification of the degree of orientation as a feature of structural changes during uniaxial elongation in not only the crystalline phase but also the amorphous one. Molecular orientation mechanisms can be successfully derived from experimental results. Generally, three mechanisms were detected for iPP: (1) interlamellar separation in the amorphous phase, (2) interlamellar slip and lamellar twisting at small elongations, and (3) intralamellar slip at high elongations. The third mechanism was favored by α‐PP, whereas β‐PP favored the second mechanism, which, in fact, was responsible for the different mechanical properties of both materials at the macroscopic level. On the other hand, crystallization conditions may have significantly affected the amorphous orientation. Nevertheless, for both iPP types the chains in the amorphous phase always oriented less than did those in the crystalline phase. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4478–4488, 2004     

In situ FTIR spectroscopic study on crystallization process of isotactic polystyrene

The melt crystallization process of isotactic polystyrene (i-PS) was studied by means of in situ Fourier transform infrared (FTIR) spectroscopy, with a focus on the conformational changes during the induction period. The spectra obtained during the induction period suggested the occurrence of some ordered structure that is characterized by higher regularity and packing of the helical moieties than observed in the melt. This ordered structure was clearly different from the amorphous structure, and close to the crystal structure. The Avrami analysis indicated that the formation process of the ordered structure at the late stage of the induction period is similar to the growth process of the crystallites after the induction period. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1227–1233, 1998     

Structure Formation During the Isothermal Crystallization of an Oriented Blend of Isotactic Polystyrene with Poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Summary: Isothermal crystallization of an oriented blend of isotactic polystyrene (iPS) with poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) was studied by in situ polarized FT‐IR spectroscopy and wide‐angle X‐ray diffraction. The structural organization during the oriented crystallization consists of three stages. The first stage is the orientation relaxation of molecular chains of iPS and PPO, the degree of orientation of iPS increases in the second stage, and the oriented chains of iPS crystallize in the third stage.

     

Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Surface adsorption‐induced conformational ordering and crystallization of polyethylene oxide

The conformational ordering and crystallization of polyethylene oxide (PEO) in the presence of KBr surface were studied with in situ Fourier transform infrared spectroscopy (FTIR). KBr was chosen because of its low absorption on IR, which allows adding large amounts KBr into PEO matrix without sacrificing IR signal significantly. The presence of KBr enhances conformational order well above the melting temperature of PEO, which can further accelerate or decelerate the crystallization process. Low concentrations of KBr powder in the PEO melt promotes crystallization process, whereas high concentration of KBr restricts large portion of PEO chains on KBr surfaces, which hinder the diffusion and rearrangement of conformation and consequently slow down the crystallization process. Acceleration of crystallization requires a synergetic effect between the adsorbed chains with ordered conformation and the free chains with a fast diffusion rate, where the former and the later are responsible to lower the nuclei barrier and to maintain the low activation energy of diffusion, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 106–112, 2010     

Wide angle X‐ray diffraction and Fourier transform infrared dichroism studies of stretched‐recovery‐restretched process of polyurethane/clay nanocomposite

An intercalated polyurethane (PU) /clay nanocomposite was prepared by in situ intercalative polymerization. The PU/clay nanocomposite pellet or film samples were stretched‐recovery‐restretched, using selfmade microstretching tools. The changes of the basal spacings of clay and the orientation of polymer chain segments during the stretched‐recovery‐restretched process were studied by wide angle X‐ray diffraction (WAXD) and Fourier transform infrared (FTIR) dichoism techniques. The WAXD results show that the basal spacing of clay did not change obviously, indicating that no macromolecular chains entered or moved out of the interlayer space, and the orientations of both hard and soft segments inside the interlayer space did not change obviously, either. The FTIR dichroism tests suggest that outside the interlayer space, the orientation of the hard chain segment increased, decreased, and then increased again during the stretched‐recovery‐restretched process. However, no obvious changes of the degree of orientation of the soft segment were observed during the processes, the slightly orientation might be released during the relaxation process before the measurements. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 654–660, 2007     

Microstructural evolution underlying the ternary stages of the elastic behaviors for poly(ether‐b‐amide) copolymer elastomers

Three stages of elastic behavior were observed during cyclic deformations for poly(ether‐b‐amide) (PEBA) segmented copolymers based on crystalline hard segments of polyamide 12 (PA12) and amorphous soft segments of poly(tetramethylene oxide) (PTMO). The underlying microstructural evolution was characterized by a combination of in situ Fourier transform infrared spectroscopy (FTIR), wide‐angle X‐ray diffraction (WAXD), and small‐angle X‐ray scattering (SAXS) technologies. The γ–α″ phase transition of crystalline PA12 occurred upon stretching, and the orientation of the α″ phase was less reversible under larger strains. PTMO chain orientation cannot be restored to the initial state, contributing to plastic deformation. Driven by the entropy effect, the strain‐induced crystallization of PTMO can fuse during sample retarding, exerting little influence on the residual strain. For PEBA with a shore D hardness of 35 D, the long period (L) can be restored to the initial L after the sample was unloaded until system fibrillation. The tie molecules between adjacent oriented lamellae can be by drawn out high stress in a PEBA material with a shore D hardness of 40 D, and the relaxation led to a second long period. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 855–864     

Effects of the oriented mesophase on the cold crystallization of syndiotactic polystyrene and its blend with poly(2,6‐dimethyl‐1,4‐phenylene oxide)

The effects of molecular orientation on the crystallization and polymorphic behaviors of syndiotactic polystyrene (sPS) and sPS/poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) blends were studied with wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry. The oriented amorphous films of sPS and sPS/PPO blends were crystallized under constraint at crystallization temperatures ranging from 140 to 240°C. The degree of crystallinity was lower in the cold‐crystallized oriented film than in the cold‐crystallized isotropic film. This was in contrast to the case of the cold crystallization of other polymers such as poly(ethylene terephthalate) and isotactic polystyrene, in which the molecular orientation induced crystallization and accelerated crystal growth. It was thought that the oriented mesophase was obtained in drawn films of sPS and that the crystallization of sPS was suppressed in that phase. The WAXD measurements showed that the crystal phase was more ordered in an sPS/PPO blend than in pure sPS under the same annealing conditions. The crystalline order recovered in the cold‐crystallized sPS/PPO blends in comparison with the cold‐crystallized pure sPS because of the decrease in the mesophase content. The crystal forms depended on the crystallization temperature, blend composition, and molecular orientation. Only the α′‐crystalline form was obtained in cold‐crystallized pure sPS, regardless of molecular orientation, whereas α′, α″, and β′ forms coexisted in the cold‐crystallized sPS/PPO blends prepared at higher crystallization temperatures (200–240°C). The β′‐form content was much lower in the oriented sPS/PPO blend than in the isotropic blend sample at the same temperature and composition. It was concluded that the oriented mesophase suppressed the crystallization of the stable β′ form more than that of the metastable α′ and α″ forms during the cold crystallization of sPS/PPO blends. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1665–1675, 2003     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

Controlled crystallization of poly(vinylidene fluoride) chains from mixed solvents composed of its good solvent and nonsolvent

Poly(vinylidene fluoride) (PVDF) chains with the same expanded state were obtained by dissolving PVDF resin in good solvent. Then, the crystallization of PVDF chains from mixed solvents composed of its good solvent and nonsolvent was investigated. N,N‐dimethylformamide (DMF) and ethanol were used as good solvent and nonsolvent of PVDF, respectively. The crystalline phases of PVDF were characterized by Fourier transform infrared (FTIR) spectroscopy and wide angle X‐ray diffraction (WAXD). For the crystallization of PVDF chains from mixed solvents, low ethanol content favored the formation of β phase, while high ethanol content resulted predominantly in the α phase. Different crystallization morphology was observed from the scanning electron microscopy (SEM) images. The obvious spherulite morphology disappeared with the increase in ethanol content in mixed solvent. According to thermal analyses, the crystallized PVDF from mixed solvents with high ethanol content had lower onset melting temperatures than that from low ethanol content. Smaller lamellar thickness calculated from WAXD data reasoned the low onset melting temperatures. The above results indicated that the crystallization of PVDF chains from mixed solvent was a “controlled” process by ethanol content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 575–581, 2010     

Crystallization,thermal behavior,and compatibility in isotactic polystyrene/poly(o-chlorostyrene-co-p-chlorostyrene) blends

The dependence of the kinetics of crystallization and melting behavior in isotactic polystyrene/poly-o-chlorostyrene-co-p-chlorostyrene (iPS/Po-CIS-co-p-CIS) blends on temperature, thermal history, and blend composition has been investigated. The crystallization rate at a given temperature and copolymer composition decreases with increasing copolymer content in the blend when the samples are premelted. These effects can be ascribed to the reduction of mobility of the crystallizable chains due to the presence of the copolymer and to the decrease in the number of heterogenous iPS nuclei as a result of the premelting process. The Avrami exponent values and the analysis of the blend morphology indicate that the growth mechanism of the crystals is strongly influenced by thermal treatment. There is no measurable change in the melting temperature of iPS in the blends, with composition indicating that, on the basis of the Flory-Huggins approximation of the thermodynamics of polymer mixing, the net interaction parameter at the melting temperature is close to zero. From the comparison of the phase diagram for the isotactic polystyrene-containing blend with that of the atactic-containing blend, it can be concluded that in the amorphous state polystyrene with a regular configuration is slightly less compatible with the P(o-CIS-co-p-CIS) than is polystyrene with random configuration.     

Development of the crystallinity and rigid amorphous fraction in cold‐crystallized isotactic polystyrene

The phase structure of crystalline isotactic polystyrene (iPS) has been investigated with temperature‐modulated differential scanning calorimetry (TMDSC), wide‐angle X‐ray scattering (WAXS), and Fourier transform infrared (FTIR) spectroscopy. Quenched amorphous samples have been cold‐crystallized at 140 or 170 °C for various crystallization times. The degree of crystallinity obtained from WAXS, with the ratio of the crystal peak intensity to the total peak intensity, shows excellent agreement with the crystallinity determined from TMDSC total heat flow endotherms. For the first time, FTIR results show that the absorbance peak ratio (I/I) has a linear correlation with the crystalline mass fraction (χ_c) for cold‐crystallized iPS according to the following relation: I/I = 0.54χ_c + 0.16. This relationship allows the crystallinity of iPS to be determined from infrared spectroscopy analyses in cases in which it is difficult to perform thermal or X‐ray measurements. On the basis of the measurements of the heat capacity increment at the glass transition, we find that a significant amount of the rigid amorphous fraction (RAF) coexists with the crystalline and mobile amorphous phases in cold‐crystallized iPS. The RAF increases systematically with the crystallization time, and a greater amount is formed at a lower crystallization temperature. A three‐phase model (crystalline phase, mobile amorphous phase, and rigid amorphous phase) is, therefore, appropriate for the interpretation of the structure of cold‐crystallized iPS. The origin of the low‐temperature endothermic peak (annealing peak) has been investigated with TMDSC and FTIR spectroscopy and has been shown to be due to irreversible relaxation of the RAF. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3026–3036, 2003     

The influence of thermoelastomers on the crystallization behavior of isotactic polypropylene under shear

The crystallization behaviors of isotactic polypropylene (iPP) and its blends with thermoelastomers have been investigated with in situ X‐ray scattering and optic microscopy. At quiescent condition, the crystallization kinetics of iPP is not affected by the presence of elastomers; while determined by the viscosity, the differences are observed on sheared samples. With a fixed shear strain, the crystallization rate increases with increasing the shear rate. The fraction of oriented lamellar crystals in blends is higher than that in pure iPP sample, while the percentage of β phase is reduced by the presence of the elastomers. On the basis of experimental results, no direct correlation among the fraction of oriented lamellae, the percentage of β phase, and growth rate can be deduced. The evolution of the fraction of oriented lamellae supports that shear field promotes nucleation rather than growth process. Shear flow induces the formation of nuclei not only with preferring orientation but also with random orientation. The total density of nuclei, which determines the crystallization kinetics, does not control the ratio between nuclei with and without preferring orientation, which determines the fraction of oriented lamellae. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1188–1198, 2006     

Wide‐angle X‐ray diffraction and differential scanning calorimetry study of the crystallization of poly(ethylene naphthalate), poly(butylene naphthalate), and their copolymers

The crystallization behavior of a series of poly(ethylene‐co‐butylene naphthalate) (PEBN) random copolymers was studied. Wide‐angle X‐ray diffraction (WAXD) patterns showed that the crystallization of these copolymers could occur over the entire range of compositions. This resulted in the formation of poly(ethylene naphthalate) or poly(butylene naphthalate) crystals, depending on the composition of the copolymers. Sharp diffraction peaks were observed, except for 50/50 PEBN. Eutectic behavior was also observed. This showed isodimorphic cocrystallization of the PEBN copolymers. The variation of the enthalpy of fusion of the copolymers with the composition was estimated. The isothermal and nonisothermal crystallization kinetics were studied. The crystallization rates were found to decrease as the comonomer unit content increased. The tensile properties were also measured and were found to decrease as the butylene naphthalate content of the copolymers increased. For initially amorphous specimens, orientation was proved by WAXD patterns after drawing, but no crystalline reflections were observed. However, the fast crystallization of drawn specimens occurred when they were heated above the glass‐transition temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 843–860, 2004     

Crystallization and chain conformation of semicrystalline and amorphous polymer blends studied by wide‐angle and small‐angle scattering

We examine the crystallization and chain conformation behavior of semicrystalline poly(ethylene oxide) (PEO) and amorphous poly(vinyl acetate) (PVAc) mixtures with wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and small‐angle neutron scattering (SANS) experiments. For blends with PEO weight fractions (wt_PEO) greater than or equal to 0.3, below the melting point of PEO, the WAXD patterns reveal that crystalline PEO belongs to the monoclinic system. The unit‐cell parameters are independent of wt_PEO. However, the bulk crystallinity determined from WAXD decreases as wt_PEO decreases. The scattered intensities from SAXS experiments show that the systems form an ordered crystalline/amorphous lamellar structure. In a combination of WAXD and SAXS analysis, the related morphological parameters are assigned correctly. With the addition of amorphous PVAc, both the average amorphous layer thickness and long spacing increase, whereas the average crystalline layer thickness decreases. We find that a two‐phase analysis of the correlation function from SAXS, in which the scattering invariant is linearly proportional to the volume fraction of lamellar stacks, describes quantitatively the crystallization behavior of PEO in the presence of PVAc. When wt_PEO is close to 1, the samples are fully spaced‐filled with lamellar stacks. As wt_PEO decreases from 1.0 to 0.3, more PVAc chains are excluded from the interlamellar region into the interfibrillar region. The fraction outside the lamellar stacks, which is completely occupied with PVAc chains, increases from 0 to 58%. Because the radius of gyration of PVAc with a random‐coil configuration determined from SANS is smaller than the average amorphous layer thickness from SAXS, we believe that the amorphous PVAc chains still persist with a random‐coil configuration even when the blends form an ordered structure. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2705–2715, 2001     

FTIR spectroscopic study on crystallization process of poly(ethylene-2,6-naphthalate)

In situ Fourier transform infrared (FTIR) measurements were carried out to elucidate conformation changes occurring during the isothermal melt crystallization of poly(ethylene-2,6-naphthalate) (PEN). Based on the band assignments for the components of the amorphous, α-crystal form, and β-crystal form of PEN in film samples, the in situ data was analyzed in terms of the amorphous- and crystal-trans conformations. It was observed at a higher isothermal crystallization temperature that the formation of amorphous-trans conformations precedes the growth of crystals. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2741–2747, 1997     

Synthesis and characterization of semicrystalline triblockcopolymers of isotactic polystyrene and polydimethylsiloxane

iPS‐b‐PDMS‐b‐iPS triblock copolymers were prepared by hydrosilylation of vinyl‐terminated isotactic polystyrenes (iPS) with α,ω‐bis(dimethylsilane)‐terminated poly(dimethylsiloxane)s (PDMS). As a function of the molecular weights of the two components, the triblock copolymer composition was varied between 9.0 and 98 wt % iPS. The resulting triblock copolymers remained soluble during block copolymer synthesis due to slow iPS crystallization in solution. At iPS content exceeding 31 wt %, the iPS crystallization was achieved by postpolymerization annealing and melt processing. The triblock copolymers melted above 200 °C with melting temperatures very similar to those of the corresponding iPS homopolymers. Nanostructure and microstructure formation of both amorphous and semicrystalline triblock copolymers were examined by means of light microscopy, atomic force microscopy, and TEM measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Linear and star‐shaped POSS hybrid materials containing crystalline isotactic polystyrene chains

New crystalline nanostructured inorganic–organic hybrid materials containing isotactic polystyrene (iPS) are prepared by means of hydrosilylation coupling of vinyl‐terminated iPS with octakis(dimethylsilyloxy)silsesquioxane (Q₈M₈H). The number average molar mass of the iPS chains varies between 2000 and 6000 g mol^?1. As a function of the iPS/Q₈M₈H ratio, using excess reagent, the formation of linear or star‐shaped hybrid architectures is achieved. Via fractionation, it is possible to isolate well‐defined linear hybrids containing one iPS chain and seven ethyl groups per silica core (iPS‐Q₈M₈E₇) as well as star‐shaped hybrids containing up to eight iPS side chains (iPS_6‐8‐Q₈M₈). These new iPS/polyhedral oligomeric silsesquioxane hybrid materials crystallize when the number average molar mass of iPS side chain exceeds 5500 g mol^?1. The hydrosilylation coupling reaction and the resulting linear iPS‐Q₈M₈E₇ and star‐shaped iPS_6‐8‐Q₈M₈ are characterized by NMR spectroscopy, size exclusion chromatography (gel permeation chromatography), and polarized light microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Molecular relaxation of isotactic polystyrene: Real‐time dielectric spectroscopy and X‐ray scattering studies*

The molecular relaxation processes and structure of isotactic polystyrene (iPS) films were investigated with real‐time dielectric spectroscopy and simultaneous wide‐ and small‐angle X‐ray scattering. The purpose of this work was to explore the restrictions imposed on molecular mobility in the vicinity of the α relaxation (glass transition) for crystallized iPS. Isothermal cold crystallization at temperatures of T_c = 140 or 170 °C resulted in a sigmoidal increase of crystallinity with crystallization time. The glass‐transition temperature (T_g), determined calorimetrically, exhibited almost no increase during the first stage of crystal growth before impingement of spherulites. After impingement, the calorimetric T_g increased, suggesting that confinement effects occur in the latter stages of crystallization. For well‐crystallized samples, the radius of the cooperativity region decreased substantially as compared with the purely amorphous sample but was always smaller than the layer thickness of the mobile amorphous fraction. Dielectric experiments directly probed changes in the amorphous dipole mobility. The real‐time dielectric data were fitted to a Havriliak–Negami model, and the time dependence of the parameters describing the distribution of relaxation times and dielectric strength was obtained. The central dipolar relaxation time showed little variation before spherulite impingement but increased sharply during the second stage of crystal growth as confinement occurred. Vogel–Fulcher–Tammann analysis demonstrated that the dielectric reference temperature, corresponding to the onset of calorimetric T_g, did not vary for well‐crystallized samples. This observation agreed with a model in which constraints affect primarily the modes having longer relaxation times and thus broaden the glass‐transition relaxation process on the higher temperature side. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 777–789, 2004     

Random multiblock poly(ester amide)s containing poly(L‐lactide) and cycloaliphatic amide segments: Synthesis and biodegradation studies

Novel multiblock poly(ester amide)s containing poly(L ‐lactide) and cycloaliphatic amide segments were synthesized from telechelic oligomer of α,ω‐hydroxyl terminated poly(L ‐lactide), 1,3‐cyclohexylbis(methylamine), and sebacoylchloride by the “two‐step” interfacial polycondensation method. The blocky nature of PEAs was established by FTIR and ¹H NMR spectroscopies. The effect of relative content of ester and amide segments on the crystallization nature of PEAs was investigated by WAXD and DSC analyses. PEAs having lower content of PLLA, PEA 1 and PEA 2, showed a crystallization pattern analogous to polyamides, whereas PEA 3, having higher content of PLLA, showed two crystalline phases characterized by polyester and polyamide segments. Random nature of PEAs was observed from single T_g values. Biodegradation studies using the enzyme lipase from Candida Cylindracea showed higher degradation rate for PEA 3 than that for PEA 1 and PEA 2. FTIR, ¹H NMR, and DSC analyses of the degraded products indicated the involvement of ester linkages in the degradation process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3250–3260, 2006