Cover Picture

The cover picture shows nanometer‐thin elastomeric membranes made from polyisobutene star polymers with ionic head groups. Spreading of the polymers onto a water surface yields fluid monolayers. These can be transferred to cover openings in solid substrates. After transfer, the ionic head groups aggregate, cross‐link the membrane, and thus give rise to elastomeric properties. For example applying a small overpressure from one side gives rise to comparatively large, reversible deformations. These elastomeric membranes could be used in micromechanical devices such as membrane pumps and valves. More details on these membranes are reported by F. Mallwitz and W. Goedel on pages 2645 ff.     

Characterisation of LB multilayers of soluble phthalocyaninatopolysiloxane

Tetra(methoxy)tetra(octyloxy)phthalocyaninatopolysiloxane (PcPS), a soluble rigid-rod polymer, forms stable monolayers on water, which can be transferred onto solid substrates. The orientation of the polymer in the transferred layers is induced by the flow on the water subphase. If a convergent flow is induced, the molecules will be aligned parallel to the dipping direction. A DC-conductivity of 10⁻⁷ S · cm⁻¹ was measured for the undoped films. Measurements with an <HG/PcPS/ITO> sandwich structure show rectification and hysteresis characteristics. PcPS modified by terminal double bonds in the side chains can be crosslinked by UV irradiation. Patterns can be developed in these films using a negative photoresist technique.     

Monolayers and membranes from amphiphilic polymers

Nanometer thin, elastomeric membranes with considerable application potential in micro mechanics and materials science can be prepared by transferring monomolecular layers of polymers with ionic head groups from the water surface to solid substrates with holes. If monolayers of liquid polymers are transferred to substrates with openings they initially cover the openings, but finally rupture within a couple of minutes after transfer. However, if the polymer monolayers are stabilised by vitrification, chemical or physical cross-linking, they can be transferred to cover openings in solids substrates as stable membranes. Especially if monolayers of low glass transition polymers are cross-linked, elastomeric membranes are obtained, which might find application in micro mechanical devices like membrane valves and pumps. Incorporation of either a second, incompatible polymer or hydrophobised colloids leads to laterally structured and porous membranes.     

A study of microgel star amphiphile monolayers

This paper reports on the synthesis of a microgel star amphiphile and on the behaviour of its monolayers both on the water surface and on solid substrates. On the water surface, the monolayer surface pressure relaxes at constant area, leading to a “duckweed”-type structure. The hydrophilic groups play an important role in this process. On solid substrates, Langmuir-Blodgett films can be fabricated from it with unit transfer ratio and good laminar structure.     

Photoresponsive monolayers on water and solid surfaces

Organic photochromic units and molecules can be regarded as light-driven nano molecular machines. Once such molecules are aligned at a surface, the supramolecular organization provides an efficient macroscopic mechanical response in a collective way. Amphiphilic polymers having an azobenzene (Az) side chain are the favorable materials for observation of such effects since they show marked photomechanical response with essentially full reversibility. An in situ Brewster angle microscopic observation showed marked morphological and rheological photoinduced changes in the molecular films. Moreover, we have newly found that the identical photosensitive molecular film transferred on to a solid mica surface shows large morphological changes under highly humid conditions as proven by atomic force microscopy (AFM). It is supposed that the molecular film is driven in the same mechanism both on water and water-adsorbed mica surfaces. These microscopic observations provide new insights of the photomechanical response in photochromic monolayers.     

Fabrication and characterization of multilayer films from amphiphilic poly(p-phenylene)s

Over the past two decades, considerable efforts have been devoted to the development of conjugated polymeric materials for electronic applications due to the tunability of their properties through variation of their chemical structure. The LB technique is one of the most effective and precise methods for controlling the organization and thereby the properties of polymer films at the nanoscale for device fabrication. A detailed study was performed on the Langmuir-Schaefer (LS) monolayer and Langmuir-Blodgett-Kuhn (LBK) multilayer formation of newly designed conjugated poly(p-phenylene)s (C(n)PPPOH), incorporated with alkoxy groups with different chain lengths (C(6)H(13)O-, C(12)H(25)O-, and C(18)H(37)O-) and hydroxyl groups on the polymer backbone. The monolayer formed at the air-water interface was characterized using surface pressure-area isotherms, including hysteresis measurements. The films were then transferred to different hydrophilic solid substrates and analyzed using surface plasmon resonance spectroscopy, UV-vis spectroscopy, fluorescence spectroscopy, and AFM measurements. The results showed that the polymer with a short alkoxy chain (C(6)PPPOH) forms uniform monolayers at the air-water interface and can be transferred as multilayer films compared to C(12)PPPOH and C(18)PPPOH. The observed film thicknesses measured by SPR and AFM studies were similar to the theoretical value obtained in the case of C(6)PPPOH, whereas this was not the case with the other two polymers. The present study shows that the polymer C(n)PPPOH with short alkoxy chain can be transferred onto different solid substrates for device fabrication with molecular level control.     

Supramolecular assemblies of a new series of gemini-type schiff base amphiphiles at the air/water interface: in situ coordination, interfacial nanoarchitectures, and spacer effect

Great interest has been devoted to the gemini amphiphiles because of their unique properties. In this article, we report some interesting properties of the interfacial films formed by a series of newly designed gemini amphiphiles containing the Schiff base moiety. This novel series of gemini amphiphiles with their Schiff base headgroups linked by a hydrophobic alkyl spacer (BisSBC18Cn, n = 2, 4, 6, 8, 10) could be spread to form stable monolayers and coordinated with Cu(Ac)(2) in situ in the monolayer. The alkyl spacer in the amphiphiles has a great effect on the regulation of the properties of the Langmuir monolayers. A maximum limiting molecular area was observed for the monolayers of the gemini amphiphile with the spacer length of hexa- or octamethylene groups. Both the monolayers on water and on the aqueous Cu(Ac)(2) subphase were transferred onto solid substrates, and different morphologies were observed for films with different spacers. Nanonail and tapelike morphologies were observed for amphiphile films with shorter spacers (n = 2 and 4) on the water surface. Wormlike morphologies were observed for gemini films with longer spacers of C(8) and C(10) when coordinated with Cu(Ac)(2). An interdigitated layer structure was supposed to form in the multilayer films transferred from water or the aqueous Cu(Ac)(2) subphase.     

On sub-T(g) dewetting of nanoconfined liquids and autophobic dewetting of crystallites

The glass transition temperature (T(g)) of thin films is reduced by nanoconfinement, but it is also influenced by the free surface and substrate interface. To gain more insights into their contributions, dewetting behaviors of n-pentane, 3-methylpentane, and toluene films are investigated on various substrates as functions of temperature and film thickness. It is found that monolayers of these molecules exhibit sub-T(g) dewetting on a perfluoro-alkyl modified Ni substrate, which is attributable to the evolution of a 2D liquid. The onset temperature of dewetting increases with film thickness because fluidity evolves via cooperative motion of many molecules; sub-T(g) dewetting is observed for films thinner than 5 monolayers. In contrast, monolayers wet substrates of graphite, silicon, and amorphous solid water until crystallization occurs. The crystallites exhibit autophobic dewetting on the substrate covered with a wetting monolayer. The presence of premelting layers is inferred from the fact that n-pentane crystallites disappear on amorphous solid water via intermixing. Thus, the properties of quasiliquid formed on the crystallite surface differ significantly from those of the 2D liquid formed before crystallization.     

Micellization of PEO/PS block copolymers at the air/water interface: a simple model for predicting the size and aggregation number of circular surface micelles

Isotherms of monolayers of poly(ethylene oxide) (PEO) and polystyrene (PS) triblock copolymers spread at the air/water interface were obtained by film balance technique. In a low concentration regime, the PEO segments surrounding the PS cores behave the same way as in monolayers of PEO homopolymers. Langmuir-Blodgett (LB) films prepared by transferring the monolayers onto mica at various surface pressures were analyzed by atomic force microscopy (AFM). The results reveal that these block copolymers form micelles at the air/water interface. Within the micelles, the PS blocks act as anchoring structures at the interface. In several cases, aggregation patterns were modified by the dewetting processes that occur in Langmuir-Blodgett films transferred to solid substrates. High transfer surface pressures and metastable states favored these changes in morphology. A flowerlike surface micelle model is proposed to explain the organization of the surface circular micelles. The model can be generalized and applied to diblock copolymers as well. The model permits prediction of the aggregation number and the size of circular surface micelles formed by PEO/PS block copolymers at the air/water interface.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Substitution controlled molecular orientation and nanostructure in the Langmuir-Blodgett films of a series of amphiphilic naphthylidene-containing Schiff base derivatives

Three amphiphilic Schiff bases containing naphthylidene group, N-octadecyl-2'-hydroxy-naphthalenylideneamine (HNOA-1), N-(4'-octadecyloxy)-2'-hydroxy-naphthalenylideneaniline (HNOA-2), and N-(4'-N-octadecylbenzamide)-2'-hydroxy-naphthalenylideneaniline (HNOA-3), were designed and their interfacial assemblies were investigated. These amphiphiles have different substitution groups in the Schiff base moiety. It was observed that HNOA-1, being in lack of second aromatic ring, formed multilayer films at the air/water interface, while the other two compounds, with another aromatic ring and some hydrophilic groups, can be spread as monolayers on water surface. All of Schiff bases could coordinate with Cu(Ac)2 in situ in the spreading films. Both the spreading films from water and aqueous Cu(Ac)2 subphases were transferred onto solid substrates and their surface morphologies as well as molecular packing modes were investigated by a series of methods such as atomic force microscopy, Fourier transform infrared spectra and X-ray diffraction. Depending on the different substitutions, these amphiphiles showed different orientations in the Langmuir-Blodgett films. Particularly, during the process of complex formation at the air/water interface, great conformational change of the alkyl chain was observed for HNOA-2 in comparison with that of other compounds. In addition, nanofiber structures were observed for the Cu(II)-complexed HNOA-1 and HNOA-2 films.     

Characteristics of monolayer behavior and multilayer film structures of comb polymers having different kinds of fluorocarbon side-chains

With comb polymers with different kinds of fluorocarbon side-chains, significant effects of spreading solvents on the monolayers at the air/water interface and the molecular arrangement in the deposited films could be found by the use of trifluoroacetic acid and its mixed solvents with n-hexane, depending on the atoms, fluorine or hydrogen, substituted at the end of the fluorocarbon side-chains. These facts are probably due to intralayer hydrogen bonding cooperating with the carbonyl groups of the long-chain esters. The deposited films of solid substrates were characterized by polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy as well as in-plane X-ray diffraction and scanning electron and atomic force microscopy.     

Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Two applications of metal cyanide square grid monolayers: studies of evolving magnetic properties in layered films and templating Prussian blue family thin films

Two applications of previously described square grid network monolayers prepared at the air/water interface are explored. The monolayer networks are single layers of Prussian blue like mixed-metal cyanide networks that are formed via the interface-directed condensation of amphiphilic pentacyanometallate complex and subphase metal ions. In the first application, the monolayers are deposited onto solid supports and the magnetic properties of the networks are evaluated, as the transferred films evolve from a monolayer to a bilayer to multilayers. In the second application, the network monolayers are used to derivatize a surface, providing a seed layer for the subsequent deposition of solid-state metal cyanide molecule-based magnets. Improved surface wetting results in continuous, transparent magnetic films.     

Self-assembly of asymmetric fan-shaped dendrimers with different generation numbers at the air-water interface

Monolayer formation of two dendrimers containing a hydrophilic core group (COOH) and hydrophobic peripheral groups (anthracene and aryl ether tail groups), 4-{10-[4-(3,5-bis-benzyloxy)-phenyl]-anthracen-9-yl}-benzoic acid (G1) and 4-(10-{4-[3,5-bis-(3,5-bis-benzyloxy)-benzyloxy]-phenyl}-anthracen-9-yl)-benzoic acid (G2), were studied. To understand the mechanism of the self-assembly of these molecules, we measured the surface pressure-surface area (Pi- A) isotherm and investigated the surface texture of Langmuir-Blodgett monolayers transferred onto hydrophilic silicon wafers. Both dendrimers form circular domains at the onset point of surface pressure as a result of the difference in hydrophobicity between the core group and the peripheral end group. The core group has a functional group at the end of dendrimer and can be anchored on the water surface. Upon further compression, monolayer of G1 shows a domain of molecules whereas a monolayer of G2 is aligned in the direction of compression at 10 mN/m. At higher surface pressure (20 mN/m), G1 molecules have several aggregates of domains, but G2 molecules maintain their ordering. These results were confirmed by the electron density profile of G1 and G2 monolayers transferred to silicon substrates, as measured by X-ray reflectivity.     

Influence of ammonium nitrate in phase transitions of Langmuir and Langmuir-Blodgett films at air/solution and solid/solution interfaces

The effect of ammonium nitrate on the phase transitions in Langmuir films of amphiphiles-stearic acid, stearyl amine (STAM), stearyl alcohol, dihexadecylphosphate, and the quarternized ammonium salt dioctadecyldimethylammonium bromide have been studied at air/water interface and in local ordering of their Langmuir-Blodgett films (LB films). The study shows that except for the stearyl amine (STAM) all other monolayers exhibit a liquid-expanded to liquid-condensed transition with slight expansion in area in the presence of ammonium nitrate. STAM monolayers show a new phase transition, which possibly arises due to the differently ionized amino groups, and change in solvation sheath due to an ion-dipole type interaction between the amino groups and the ammonium ion in the subphase. Mixed films of the amine with the acid and alcohol did not show such intermediate phases indicating that competing H-bonds between polar groups themselves and dipolar couplings between the polar groups and ammonium nitrate play a major role in the organization of the molecules at the interface. The above effect resulting in a change in the local order is borne out by Brewster angle micrographs (BAM) of the Langmuir films of STAM at air/solution interface. Such behavior is also seen at solid/liquid interfaces where the polar component of surface energy undergoes a drastic change for the amine films transferred onto solid substrates from the air/ammonium nitrate solution interface.     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.     

Photolysis of polymeric organosilicon systems. III. Synthesis and photochemical behavior of polysiloxanes containing phenyldisilanyl units

The synthesis and photochemical behavior of three types of polysiloxanes containing phenyldisilanyl units as chromophore have been reported. Irradiation of thin liquid films of the polymer (2) prepared from copolymerization of octamethylcyclotetrasiloxane and 1,3,5-triphenyl-1,3,5-tris(trimethylsilyl)cyclostrisiloxane (1) with a 500-W Xe-Hg lamp afforded transparent solid films which are insoluble in common organic solvents. Similar irradiation of thin liquid films of polysiloxane (8) containing both phenyldisilanyl units and vinyl groups resulted in formation of crosslinked solid films. When thick films of the polymers 2 and 8 were irradiated with a Xe-Hg lamp, crosslinking occurred only on the surface of the films, but inside remained as liquid. Irradiation of the films prepared from the polysiloxane involving the phenyldisilanyl units and butenyl groups, however, gave crosslinked solid films, whatever thickness of the films. The mechanism of photochemically induced crosslinking of the copolymers is discussed on the basis of the results obtained from the photolysis of 1,1-bis(trimethylsiloxy)-1-phenyl(trimethyl)disilane as a model compound.     

Langmuir-Blodgett-Kuhn and self-assembled films of asymmetrically substituted poly(paraphenylene)

Asymmetrically substituted poly(paraphenylene) (PhPPP) with hydrophilic and hydrophobic side chains was investigated. The polymer behavior at the air-water interface was studied on the basis of surface pressure-area (pi-A) isotherms and compression/expansion hysteresis measurements. PhPPP can form stable monolayers with an area per repeat unit of A=0.20+/-0.02 nm2 and a collapse pressure in the range of pi=25 mN/m. Then, Langmuir-Blodgett-Kuhn (LBK) films of PhPPP were prepared by horizontally and vertically transferring the Langmuir monolayers onto hydrophilic solid substrates at pi=12 mN/m. Cross-section analysis of the AFM tapping-mode topography images of a single transferred monolayer reveals a thickness of d0=0.9+/-0.1 nm. Taking into account the obtained monolayer thickness, curve-fitting calculations of angular scan data of LB monolayers measured using surface plasmon resonance (SPR) spectroscopy lead to a value for the refractive index of n=1.78+/-0.02 at lambda=632.8 nm. Next, the spontaneous formation of a PhPPP monolayer by adsorption from solution was studied ex situ by atomic force microscopy and UV-vis spectroscopy and in situ by using SPR spectroscopy. Stable self-assembled monolayers of PhPPP can be formed on hydrophilic surfaces with a thickness similar to that of the monolayer obtained using the LB method. The characterization results confirmed the amphiphilic character and the self-assembly properties of PhPPP, as well as the possibility of preparing homogeneous monolayer and multilayer films.     

Langmuir-Blodgett films of polymethacrylates with side chains containing functionalized aromatic schiff's bases

Langmuir-Blodgett (LB) film formation has been investigated for polymers in which non-linear optical (NLO) moieties are attached to the side chain of a polymethacrylate (PMA) backbone. Polymer monolayers were successfully transferred onto hydrophilic glass substrates using a moving-wall type LB trough. The LB films were characterized by pressure-area isotherms, polarized ultraviolet visible spectra, ellipsometry, and second harmonic generation measurements. The characterization shows that NLO moieties in the side chain are inclined at a shallow angle to the plane of the substrate. The second-order nonlinear optical coefficient and molecular hyperpolarizability were also calculated. © 1993 John Wiley & Sons, Inc.