Flexibilized styrene‐N‐substituted maleimide copolymers. I. Multiblock copolymers prepared from styrene‐maleimide telechelics and polytetrahydrofuran

Telechelic copolymers of styrene and different N‐substituted‐maleimides (SMIs) with a molecular weight of 2000–8000 g/mol were synthesized using the starved‐feed‐reactor technique and were nearly bifunctional when the monomer feed had a high styrene concentration. The COOH‐terminated rigid SMI blocks were polycondensated with OH‐terminated poly(tetrahydrofuran) (PTHF) blocks, with a molecular weight of 250–1000 g/mol, which are the flexible parts in the generated homogeneous multiblock copolymer. The entanglement density, which is closely related to the toughness of materials, increased in these flexible SMI copolymers (ν_e = 5.2 · 10²⁵ m⁻³) compared to the unflexibilized ones (ν_e = 2.4 · 10²⁵ m⁻³). The glass transition temperature of these flexibilized, single‐phase multiblock copolymers was still high enough to qualify them as engineering plastics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3550–3557, 2000     

Regeneration of polycondensation of wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in main chain

Wholly aromatic poly(azomethine)s with 1,5‐ or 2,6‐substituted naphthalene moiety in the main chains were prepared in aprotic polar solvents or m‐cresol under various reaction conditions. In the polymerization of 1,5‐diaminonaphthalene with terephthalaldehyde, the polymer that synthesized in (HMPA/DMSO) at room temperature for 24 h by adding 5 wt % of calcium chloride and a very small amount of p‐toluenesulfonic acid showed the highest reduced viscosity in all of the polymers from 1,5‐diaminonaphthalene. The reduced viscosity of poly(azomethine)s synthesized from 2,6‐diaminonaphthalene with 2,6‐diformylnaphthalene in m‐cresol and with terephthalaldehyde in HMPA/DMSO were η_red = 0.35 and 0.36, respectively. The thermal analysis showed the poly(azomethine)s had high thermal stability and the glass‐transition temperatures of these polymers are about 250 °C. The X‐ray diffraction showed that they are partially crystalline. They could be polymerized again by second stage polycondensation in polyphosphoric acid. The reduced viscosities of the obtained polymers were about 2–5 times as high as that of the pristine polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1064–1072, 2000     

Synthesis of double hydrophilic poly(ethylene oxide)‐b‐poly(2‐hydroxyethyl acrylate) by single‐electron transfer–living radical polymerization

In this study, the polymerization of (2‐hydroxyethyl) acrylate (HEA), in polar media, using Cu(0)‐mediated radical polymerization also called single‐electron transfer–living radical polymerization (SET‐LRP) is reported. The kinetics aspects of both the homopolymerization and the copolymerization from a poly(ethylene oxide) (PEO) macroinitiator were analyzed by ¹H NMR. The effects of both the ligand and the solvent were studied. The polymerization was shown to reach very high monomer conversions and to proceed in a well‐controlled fashion in the presence of tris[2‐(dimethylamino)ethyl]amine Me6‐TREN and N, N,N′, N″, N″‐pentamethyldiethylenetriamine (PMDETA) in dimethylsulfoxide (DMSO). SET‐LRP of HEA was also led in water, and it was shown to be faster than in DMSO. In pure water, Me₆‐TREN allowed a better control over the molar masses and polydispersity indices than PMDETA and TREN. Double hydrophilic PEO‐b‐PHEA block copolymers, exhibiting various PHEA block lengths up to 100 HEA units, were synthesized, in the same manner, from a bromide‐terminated PEO macroinitiator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Solvent‐ and counterion‐specific swelling behavior of poly(acrylic acid) gels

The collapse of alkali metal poly(acrylate) (PAAM) gels was investigated for various water/organic solvent mixture systems: methanol (MeOH), ethanol (EtOH), 2‐propanol (2PrOH), t‐butanol (tBuOH), dimethyl sulfoxide (DMSO), acetonitrile (AcN), acetone, tetrahydrofuran (THF), and dioxane. In order to ascertain the counterion specificity in the swelling behavior, four kinds of alkali metal counterions were used: Li⁺, Na⁺, K⁺, and Cs⁺. Remarkable solvent and counterion specificities were observed for every counterion species and every solvent system, respectively. For example, in aqueous EtOH the dielectric constants (D_cr) at which collapse occurred were in the order PAACs < PAALi < PAAK < PAANa. On the other hand, the D_cr at which PAALi gel collapsed increased in the order tBuOH < dioxane < THF < MeOH < 2PrOH < EtOH < acetone < AcN < DMSO, where the D_cr ranged from about 39 to about 67. This was in contrast to our previous observation for a partially quaternized poly(4‐vinyl pyridine) (P4VP) gel, which collapsed in a much narrower D_cr region in similar mixed solvents. The present solvent‐ and counterion‐specific collapses are discussed on the basis of solvent properties such as the dielectric constant and Gutmann's donor number and acceptor number of a pure solvent. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2791–2800, 2000     

Molecular weight and aggregation of Aeromonas gum treated with dimethyl sulfoxide in aqueous solution

Aeromonas (A) gum, an acidic hetero polysaccharide, in 0.2 M LiCl/dimethyl sulfoxide (DMSO) was fractionated satisfactorily according to the nonsolvent addition method. Eight fractions were chosen to examine their aggregation behavior in aqueous solution. The weight‐average molecular weight (M_w), radius of gyration 〈S²〉^1/2, and intrinsic viscosities [η] of the fractions in 0.2 M LiCl/DMSO and 0.5 M NaCl aqueous solution at 25 °C were measured by static light scattering and viscometry. The results indicated that the A gum was aggregated in 0.5 M NaCl aqueous solution at 25 °C, and the aggregates were broken in 0.2 M LiCl/DMSO. The apparent weight‐average aggregation number (N_ap) of the fractions increased with the process of fractionation, that is, N_ap increased from 1.1 to 15 with decreasing M_w of the single chain. The fractions obtained by treating with DMSO were more easily dissociated in the aqueous solution, and its N_ap was lower than that of the A gum fractions that were not treated with DMSO. Moreover, the A gum molecules with relatively low M_w aggregated easily to form a compact spherelike structure in the aqueous solution. Elemental analysis and ¹³C NMR spectroscopy indicated that DMSO was adsorbed on the A gum molecules caused by the fractionation program; DMSO not only prevented the polysaccharide aggregation but also increased the solubility. A model has been proposed to describe the aggregation behavior of the A gum chains with DMSO overcoat in the aqueous solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2269–2276, 2002     

Synthesis of poly(silyl ether)s containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with dichlorosilanes

The polyaddition of bis(3‐ethyl‐3‐oxetanylmethyl) terephthalate (BEOT) with dichlorodiphenylsilane (CPS) using tetrabutylammonium bromide (TBAB) as a catalyst proceeded under mild reaction conditions to afford a polymer containing silicon atoms in the polymer main chain. A poly(silyl ether) (P‐1) with a high molecular weight (M_n = 53,200) was obtained by the reaction of BEOT with CPS in the presence of 5 mol % of TBAB in toluene at 0 °C for 1 h and then at 50 °C for 24 h. The structure of the resulting polymer was confirmed by IR and ¹H NMR spectra. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with dichlorosilanes proceeds smoothly to give corresponding poly(silyl ether)s with TBAB as the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2254–2259, 2000     

Synthesis and properties of an amphiphilic dithiafulvene oligomer

An amphiphilic dithiafulvene oligomer was synthesized by cycloaddition polymerization of aldothioketene generated from 1,4‐diethynylbenzene and a PEO‐grafted phenylacetylene (feed ratio 5/1). The degree of polymerization was determined as 6 by ¹H NMR analysis. The aggregation behavior of the oligomer was studied in the mixed solvent of D₂O and DMSO‐d₆. Effective charge‐transfer interaction of the oligomer and hydrophilic methyl viologen was observed in an aqueous solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3770–3775, 2007     

Effect of DMSO used as solvent in copper mediated living radical polymerization

The use of DMSO as solvent for transition metal mediated living radical polymerization was investigated using copper (I) bromide/N‐(n‐propyl)‐2‐pyridyl‐methanimine catalyst system and ethyl‐2‐bromoisobutyrate as initiator. The best conditions for polymerization in DMSO of different methacrylates (MMA, BMA, DMAEMA, HEMA) were determined. In all cases, the measured number‐average molar mass of the product increased linearly with monomer conversion in agreement with the theoretical M_n with low polydispersity products (1.16 < PDI < 1.4) achieved. Solvent was found to play a crucial role in the process. The effect of the polar solvent has been investigated and it was shown that DMSO could coordinate copper (II), increasing the activation process, or copper (I), changing the nature of the copper catalyst by competitive complexation of ligand and DMSO. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6299–6308, 2004     

Polyesters containing sulfur. VIII. New benzophenone‐derivative thiopolyesterdiols synthesis and characterization. Their use for thermoplastic polyurethanes preparation

The new linear thiopolyesterdiols (PEs) containing sulfur in the main chain were synthesized by melt polycondensation of newly obtained benzophenone‐4,4′‐bis(methylthioacetic acid) with excess of 1,4‐butanediol, 1,5‐pentanediol, and 1,6‐hexanediol. All these PEs (M _n of 2000–2600) were converted to thiopoly(ester‐urethane)s (PEUs) by polyaddition reaction with hexamethylene diisocyanate or 4,4′‐diphenylmethane diisocyanate, which was carried out in melt at the ratio of NCO/OH = 1. The resulting thermoplastic PEUs were amorphous and elastomeric, with elongation at break ranging from 630 to 1200%. The polymers were characterized by Fourier transform infrared, ¹H NMR, thermogravimetric analysis, differential scanning calorimetry, and in the case of PEUs, Shore A/D hardness and tensile properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3977–3983, 2000     

Optimum conditions for the synthesis of linear polylactic acid‐based urethanes

The reactions of polylactic acid (PLA) oligomers and isocyanates (4,4′‐diphenylmethane diisocyanate and toluene diisocyanate) are reported. The effects of the reaction conditions, that is, the reaction time, reaction temperature, molar ratios, isocyanates, and catalyst, on the number‐average molecular weight (M_n ) are demonstrated. The optimum reaction conditions are determined by the synthesis of relatively high M_n PLA‐based linear polyurethanes. The structure of the polymer samples was investigated with dynamic light scattering, ¹H NMR, IR, and matrix‐assisted laser‐desorption ionization time‐of‐flight mass spectroscopy (MALDI‐TOF MS). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2925–2933, 2000     

Poly(arylene ether)s from new biphenols containing imidoarylene and dicyanoarylene moieties

Novel poly(arylene ether)s were synthesized from new biphenol monomers 14–16 1 containing imido‐ or dicyanoarylene groups. The syntheses of these polymers were carried out in tetramethylene sulfone in the presence of anhydrous K₂CO_3, by a nucleophilic substitution condensation between the biphenol and activated difluoro compounds to give high molecular weight polymers. All the polymers have high T_g 's and good thermal stability as determined from DSC and TGA analysis. Inherent viscosities of these polymers are in the range of 0.33–0.63 dL/g. They are amorphous and readily soluble in NMP, DMF, and DMSO. The glass‐transition temperatures of the polymers range from 248–295 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1318–1322, 2000     

Aromatic poly(benzoxazole)s from multiring diacids containing (phenylenedioxy)diphenylene or (naphthalenedioxy)diphenylene groups: Synthesis and thermal properties

Poly(arylether benzoxazole)s (PAEBOs) were prepared from a series of fully aromatic dicarboxylic acids containing (phenylenedioxy)diphenylene or (naphthalenedioxy) diphenylene groups and 3,3′‐dihydroxy‐4,4′‐diaminobiphenyl (I) or 4‐4′‐(hexafluoroisopropylidene)bis(2‐aminophenol) (II) through high‐temperature direct polycondensation. A phosphorous pentoxide/methanesulfonic acid mixture or trimethylsilylpolyphosphate was used as a condensing agent. All the PAEBOs were amorphous and soluble in strong acids, and those derived from II were also readily soluble in polar organic solvents. Flexible films were cast from their chloroform solutions. The PAEBOs showed inherent viscosity values of 0.68–2.06 dL/g (CH₃SO₃H, T = 30 °C, c = 0.15 g · dL⁻¹). Thermal analysis indicated glass‐transition temperatures ranging from 236 to 270 °C and thermal stability (5% weight loss) in nitrogen up to 526 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1172–1178, 2000     

Ester‐ and amide‐terminated dendrimers with alternating amide and ether generations

Ester‐terminated polyamide dendrimers up to the third generation and amide‐terminated polyamide dendrimers of the first generation were synthesized by convergent growth. The Williamson ether synthesis and diphenylphosphoryl azide (DPPA) coupling of amines to carboxylic acids were used for the construction of the dendrimers, having alternate ether and amide generations. The methyl ester‐ and N,N‐diethylamide‐terminated dendrimers were readily soluble in common organic solvents while the N‐methylamide‐ and N‐benzylamide‐terminated dendrimers were soluble only in DMF and DMSO. Both the end and internal amide groups of the N,N‐diethylamide‐terminated dendrimer were reduced by LiAlH₄ to form a polyamine dendrimer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1533–1543, 2000     

Synthesis of poly(succinimide) by bulk polycondensation of L‐aspartic acid with an acid catalyst

The bulk polycondensation of L ‐aspartic acid (ASP) with an acid catalyst under batch and continuous conditions was established as a preparative method for producing poly(succinimide) (PSI). Although sulfuric acid, p‐toluenesulfonic acid, and methanesulfonic acid were effective at producing PSI in a high conversion of ASP, o‐phosphoric acid was the most suitable catalyst for yielding PSI with a high weight‐average molecular weight (M_w) in a quantitative conversion; that is, the M_w value was 24,000. For the continuous process using a twin‐screw extruder at 3.0 kg · h⁻¹ of the ASP feed rate, the conversion was greater than 99%, and the M_w value was 23,000 for the polycondensation with 10 wt % o‐phosphoric acid at 260°C. Sodium polyaspartate (PASP‐Na) originating from the acid‐catalyzed polycondensation exhibited high biodegradability and calcium‐ion‐chelating ability. The total organic carbon value was 86 ∼ 88%, and 100 g of PASP‐Na chelated with 5.5 ∼ 5.6 g of calcium ion, which was similar to the value for PASP‐Na from the acid‐catalyzed polycondensation with a mixed solvent © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 117–122, 2000     

Chemoselective polyesterification by direct polycondensation

A convenient method for the synthesis of polyester‐containing amino substitutes on the aromatic rings of the backbone has been developed. This polyester was prepared by chemoselective polyesterification of isophthalic acid with bisphenol having an amino group in the presence of the condensing agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐benzoxazolyl)phosphonate ( 1 ) and 1,5‐diazabicyclo[4,3,0]‐5‐nonene as a base. The model reactions were carried out in detail to elucidate appropriate conditions of chemoselective polyesterification. Direct polycondensation of isopthalic acid with 4,4′‐[1‐(4‐aminophenyl)ethylidene]bisphenol proceeded smoothly under mild conditions and produced the desired polyester with a number average molecular weight of 11,000 and M_w/M_n of 2.22. The polymer obtained was characterized by IR, ¹H, and ¹³C NMR spectroscopies. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 78–85, 2001     

Living/controlled radical polymerization of styrene with a new initiating system: DCDPS/FeCl3/PPh3

The living/controlled radical polymerization of styrene was investigated with a new initiating system, DCDPS/FeCl₃/PPh₃, in which diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) was a hexa‐substituted ethane thermal iniferter. The polymerization mechanism belonged to a reverse atom transfer radical polymerization (ATRP) process. The polymerization was controlled closely in bulk (at 100 °C) or in solution (at 110 °C) with a high molecular weight and quite narrow polydispersity (M_w/M_n = 1.18 ∼ 1.28). End‐group analysis results by ¹H NMR spectroscopy showed that the polymer was ω‐functionalized by a chlorine atom, which also was confirmed by the result of a chain‐extension reaction in the presence of a FeCl₂/PPh₃ or CuCl/bipy (2,2′‐bipyridine) catalyst via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 101–107, 2000     

Effect of catalyst systems and reaction conditions on the synthesis of cellulose‐g‐PDMAam copolymers by controlled radical polymerization

Various copper‐based catalyst systems and reaction conditions were studied in the graft copolymerization of N,N‐dimethylacrylamide (DMAam) with a cellulose‐based macroinitiator by controlled radical polymerization. The cellulose macroinitiator with degree of substitution DS = 0.44 was synthesized from dissolving softwood pulp in a LiCl/DMAc solution. The graft copolymerizations of DMAam, using the cellulose macroinitiator and various copper‐based catalyst systems, were then carried out in DMSO solutions. The copolymerization kinetics was followed by ¹H NMR. Water‐soluble cellulose‐g‐PDMAam copolymers were comprehensively characterized by ATR‐FTIR and ¹H NMR spectroscopies and SEC analyses. DLS and steady‐shear viscosity measurements revealed that when the DP_graft of the cellulose‐g‐PDMAam copolymer is high enough, the copolymer forms a more compact structure in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Graft copolymers of polyethylene by atom transfer radical polymerization

Poly(ethylene‐g‐styrene) and poly(ethylene‐g‐methyl methacrylate) graft copolymers were prepared by atom transfer radical polymerization (ATRP). Commercially available poly(ethylene‐co‐glycidyl methacrylate) was converted into ATRP macroinitiators by reaction with chloroacetic acid and 2‐bromoisobutyric acid, respectively, and the pendant‐functionalized polyolefins were used to initiate the ATRP of styrene and methyl methacrylate. In both cases, incorporation of the vinyl monomer into the graft copolymer increased with extent of the reaction. The controlled growth of the side chains was proved in the case of poly(ethylene‐g‐styrene) by the linear increase of molecular weight with conversion and low polydispersity (M_w /M_n < 1.4) of the cleaved polystyrene grafts. Both macroinitiators and graft copolymers were characterized by ¹H NMR and differential scanning calorimetry. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2440–2448, 2000