LC–UV Method with Pre-Column Derivatization for the Determination of Ciclopirox Olamine in Raw Material and Topical Solution

A rapid, simple and sensitive liquid chromatographic method has been developed to assay ciclopirox olamine in raw material and topical solution. The analysis used a reversed-phase C₁₈ end-capped column, with UV detection at 305 nm and pre-column derivatization with dimethyl sulphate. A linear response (r ² > 0.999) was observed in the range of 0.4–200 μg mL⁻¹. The method showed good recoveries for the raw material and topical solution and the relative standard deviation intra and inter-day were ≤2.00%. Validation parameters such as specificity and robustness were also determined. The proposed method provided an accurate and precise analysis of ciclopirox olamine in raw material and topical solution.

     

LC–UV Method with Pre-Column Derivatization for the Determination of Ciclopirox Olamine in Raw Material and Topical Solution

A rapid, simple and sensitive liquid chromatographic method has been developed to assay ciclopirox olamine in raw material and topical solution. The analysis used a reversed-phase C₁₈ end-capped column, with UV detection at 305 nm and pre-column derivatization with dimethyl sulphate. A linear response (r ² > 0.999) was observed in the range of 0.4–200 μg mL^?1. The method showed good recoveries for the raw material and topical solution and the relative standard deviation intra and inter-day were ≤2.00%. Validation parameters such as specificity and robustness were also determined. The proposed method provided an accurate and precise analysis of ciclopirox olamine in raw material and topical solution.     

Determination of ciclopirox olamine in pharmaceutical products by capillary electrophoresis with capacitively coupled contactless conductivity detection

This paper describes the determination of ciclopirox olamine in pharmaceutical formulations using capillary electrophoresis with capacitively coupled contactless conductivity detection. In an alkaline medium, ciclopirox olamine is converted into an anionic species and its detection is possible in capillary electrophoresis with capacitively coupled contactless conductivity detection without an electroosmotic flow modifier, because it is a low-mobility species. A linear working range from 2.64 to 264 μg/mL in sodium hydroxide electrolyte as well as low detection limit (0.39 μg/mL) and a good repeatability (RSD = 3.4% for 264 μg/mL ciclopirox solution (n = 10)) were achieved. It was also possible to determine olamine in its cationic form when acetic acid was used as the electrolyte solution. The results obtained include a linear range from 26.4 to 184.8 μg/mL and a detection limit of 2.6 μg/mL olamine. The proposed methods were applied to the analysis of commercial pharmaceutical products and the results were compared with the values indicated by the manufacturer as well as those obtained using a titrimetric method recommended by American Pharmacopoeia.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.     

Multivariate optimisation of a rapid and simple automated method for bismuth determination in well water samples exploiting long path length spectrophotometry

An automated spectrophotometric system is proposed for the determination of bismuth in well water samples, using multi-syringe flow injection analysis (MSFIA) and exploiting a liquid waveguide capillary cell (LWCC). This method is based on the colorimetric reaction of bismuth and methylthymol blue (MTB) in the presence of polyvinylpyrrolidone (PVP) in acid medium (0.1 mol L^?1 HNO₃). The Bi(III)–MTB complex was measured at 600 nm. The method was optimised by multivariate techniques. Some figures of merit of the proposed system are worth being highlighted, such as its wide linear working range (between 4.9 and 600 μg L^?1), its low detection limit (1.5 μg L^?1 of bismuth) and its high intra-day precision and inter-day precision (0.7% (n = 12) and 1.4% (n = 5), respectively, both expressed as RSD). Moreover, a high injection frequency of 30 h^?1 is achieved, as the proposed analyser is a powerful tool for fast Bi(III) determination. The method developed was successfully validated by analysing reference samples (pharmaceutical samples) by comparing the results with those obtained by ICP-OES and it was satisfactorily applied to well water samples. Besides, the present system is miniaturised allowing in situ measurements in control processes and field analysis.     

Development of a Flow Injection Manifold for Napropamide Determination by Photo-Induced Chemiluminescence

A new, rapid, and simple method is proposed for the determination of the pesticide napropamide by photo-induced chemiluminescence detection coupled with a flow injection analysis (FIA) system. The emission was obtained by oxidation with periodate in basic medium, of the photoproducts generated on-line by UV irradiation (254 nm) of napropamide in acidic SDS (sodium dodecyl sulfate) medium. The flow method, in combination with the solid phase extraction (SPE) performed off-line with C₁₈ cartridges, allowed the determination of this pesticide over the 0.8–14.0 µ gL^?1 range, with a limit of detection of 0.3 µ gL^?1. The relative standard deviation (n = 9) at 2.5 µ gL^?1 level was 4.3% for the combined FIA-SPE system. After testing the influence of several potential interfering compounds, including ions and other pesticides, the method was successfully applied to the determination of napropamide in spiked water samples with recoveries between 96–103%.     

Reagentless Photochemically-Induced Fluorimetric Determination of Fipronil by Sequential-Injection Analysis

This paper deals with the photo-induced fluorimetric determination of the insecticide fipronil using a sequential-injection flow assembly provided with an on-line photoreactor. The fluorescent photoproduct generated after UV irradiation for 20 s of the insecticide at 0.01 M NaOH solution is monitored at 245/450 nm/nm (λ_exc/λ_em). A detection limit of 0.17 µg mL^?1 and a sample throughput of 18 samples per hour were obtained. The proposed method was satisfactorily applied to the determination of the analyte in phytosanitary and veterinary products with minimum pretreatment. In addition, a recovery study was performed in all the analyzed samples, observing recoveries between 95 and 100%, with R.S.D. lower than 3% in all cases.     

A New LC Method for Determination of Some Aminoglycoside Antibiotics in Dosage Forms and Human Plasma Using 7-Fluoro-4-nitrobenz-2-oxa-1,3-diazole as a Fluorogenic Pre-Column Label

A validated, selective and sensitive pre-column derivatization chromatographic method for determination of some aminoglycoside antibiotics, namely, amikacin (AMK), gentamicin and neomycin sulphates, has been developed. Determination was obtained by pre-column reaction of the samples with 7-fluoro-4-nitrobenz-2-oxa-1,3-diazole and separating the corresponding derivatives on a reversed phase LC column (ultrasphere C₁₈, 250 × 4.6 mm) and fluorescence detection (λ _ex 465 nm, λ _em 531 nm). Linear quantitative response curve was generated over a concentration range of 0.05–10 μg mL⁻¹ with a correlation coefficient of more than 0.999 with all studied compounds. The accuracy and precisions were satisfactory for determination of all drugs in dosage forms within- and between-run assay. Furthermore, the method was extended to the determination of AMK in spiked human plasma. The method is specific for the intact drugs, and can be adopted in the presence of co-formulated drugs.

     

Development and Validation of a Stability-Indicating LC Method for the Determination of Rupatadine in Pharmaceutical Formulations

A reversed-phase liquid chromatography (RP-LC) method was validated for the determination of rupatadine in pharmaceutical dosage forms. The LC method was carried out on a Gemini C₁₈ column (150 mm × 4.6 mm I.D.), maintained at 30 °C. The mobile phase consisted of ammonium acetate buffer (pH 3.0; 0.01 M) with 0.05% of 1-heptanesulfonic acid–acetonitrile (71.5:28.5, v/v), run at a flow rate of 1.0 mL min⁻¹ and using photodiode array (PDA) detection at 242 nm. The chromatographic separation was obtained with retention time of 5.15 min, and was linear in the range of 0.5–400 μg mL⁻¹ (r ² = 0.9999). The specificity and stability-indicating capability of the method was proven through the degradation studies and showing also, that there was no interference of the excipients. The accuracy was 100.39% with bias lower than 0.58%. The limits of detection and quantitation were 0.01 and 0.5 μg mL⁻¹, respectively. Moreover, method validation demonstrated acceptable results for precision, sensitivity and robustness. The proposed method was applied for the analysis of pharmaceutical dosage forms assuring the therapeutic efficacy.

     

Validated Flow Injection Spectrophotometric Assay for the Quality and Stability Control of Gemfibrozil Tablets

Abstract

A validated flow injection spectrophotometric assay has been developed and optimized for the determination of gemfibrozil in pharmaceutical formulations. The method is based on the direct measurement of the absorbance of the analyte—under flow conditions—in basic medium, at 276 nm. The assay was optimized in terms of sample injection volume and flow rate and validated in terms of linearity, repeatability, detection limit, accuracy, and selectivity. Linear calibration curve was obtained in the range of 20–100 mg l^?1, while the detection limit (1.4 mg l^?1), the repeatability (s _r <1.0%, n=12) and the sampling rate (30 h^?1) were satisfactory. The method was applied successfully to the quality control of one batch (batch no. 052) and the stability control of three batches (batches no. 049–051) of a gemfibrozil‐containing formulation (Prelisin^®, Cosmopharm Ltd, Greece).     

Determination of Vitamin A in Infant Milk-Based Formulas and Pharmaceutical Formulations Using Flow Injection with Ce(IV)–Na2SO3 Chemiluminescence Detection

A rapid and simple flow injection (FI) method is reported for the determination of vitamin A (retinol) based on its strong enhancing effect on the Ce(IV)–Na₂SO₃ chemiluminescence (CL) reaction in an acidic solution. The effect of key chemical and physical parameters (i.e., reagent concentrations, flow rate, and sample volume) was optimized and potential interferences examined. Under the selected experimental conditions, a linear calibration was obtained between the CL intensity and vitamin A concentration in the range 0.1–8.0 µg mL^?1 (r ²  = 0.9986, n = 8). The limit of detection (3 s x blank) was 0.01 µg mL^?1 retinol (n = 6) and the relative standard deviation (RSD) for 0.25 µg mL^?1 retinol was 2.3% (n = 10) with a sampling rate of 180 h^?1. The method was successfully applied to infant milk-based formulas and pharmaceutical formulations and the results were not significantly different at 95% confidence interval with those obtained by using a spectrophotometric reference method. The possible CL mechanism is also discussed briefly supporting with UV-visible, fluorescence, and CL spectra.     

Application of Pulsed Flow Analysis for Chemiluminescent Screening of Fluoxetine Counterfeit Pharmaceuticals

Abstract

A chemiluminometric methodology for fluoxetine determination based on its antioxidant scavenger effect on the fast chemiluminescence reaction between luminol and hypochlorite, is proposed. The developed procedure was implemented in a fully automated multi‐pumping flow system, combining the excellent mixing characteristics of the pulsed flow with chemiluminescence detection, resulting on a sensitive, simple, and fast procedure for fluoxetine determination in pharmaceutical formulations. Linear calibration plots for fluoxetine hydrochloride concentrations of up to 10 mg l^?1 (r=0.9995, n=7) were obtained, with an r.s.d<2% (n=10). Detection limit (3 σ) was 0.31 mg l^?1 and the sampling rate was about 136 determinations per h.     

Automatic Multipumping Flow System for Handling Viscous Solutions: Application to the Spectrophotometric Determination of Trimipramine

Abstract

The present work describes the implementation, by using MultiPumping Flow Analysis System (MPFS), of a spectrophotometric method for the determination of trimipramine in commercially available pharmaceutical formulations, based on the reaction with ammonium monovanadate in acidic medium yielding a colored compound with a maximum of absorbance at 620 nm. The improved flow mixing conditions during sample and reagents insertion and transport, as a result of the chaotic movement of the solutions originated by the MPFS pulsed flow, assured a fast reaction zone homogenization in a reduced residence time, which was particularly advantageous for carrying out analytical determinations that involved highly viscous solutions, as is the case of the sulfuric acid solution used in the determination of trimipramine, without impairing the sampling rate.

A linear working range for trimipramine concentrations of up to 50 mg L^?1 (r = 0.9998; n = 6) was obtained, and the determined detection limit was about 1.15 mg L^?1. The sampling rate was approximately 50 determinations per hour. The obtained results were in agreement with those furnished by the reference procedure, with relative deviations lower than 4.7%. With the developed MPFS, the consumption of the reagents ammonium monovanadate and sulfuric acid was reduced by approximately 41.02% and 54.29%, respectively, compared with a previously proposed multicommutated flow analysis system.     

Micellar Liquid Chromatographic Determination of Penicillins in Pharmaceuticals

A new, simple, rapid and specific micellar liquid chromatographic (MLC) method was developed and validated for the determination of amoxicillin, ampicillin, cloxacillin and dicloxacillin in pharmaceutical formulations. Separation was achieved isocratically on an Ultra C₁₈ column (150 mm × 4.6 mm) utilizing a mobile phase of 25 mM SDS–2% (v/v) 1-butanol in phosphate buffer (pH 5.0) at a flow rate of 1.0 mL min^?1 with UV detection at 200 nm. Validation experiments were performed to demonstrate linear ranges, accuracy, precision, robustness, limit of detection (LOD) and limit of quantification (LOQ). The method was applied to the determination of these penicillins in various pharmaceutical formulations. The results compared favorably with those obtained by the official methods, and were in agreement with the declared compositions. The method can be used for quality control assay of the studied penicillins.     

LC–MS Method for the Sensitive Determination of Metoclopramide: Application to Rabbit Plasma, Gel Formulations and Pharmaceuticals

To support real biological sample application, a simple, selective and rapid LC–MS method has been developed and validated for the sensitive determination of metoclopramide in rabbit blood, ex vivo permeation studies and pharmaceutical dosage form. LC–MS analysis was performed isocratically on a Zorbax SB-C₁₈ column with a mobile phase consisting of methanol:ammonium acetate buffer (pH 3.0) 75:25 (v/v) at a flow rate of 0.70 mL min^?1. The outlet of the column was connected to a single quadrupole mass spectrometer with positive mass spectrometric detection. Ions were detected in the positive multiple reaction monitoring mode. The assay was linear over the concentration range of 1.25–200 pg μL^?1 with a limit of detection of 0.077 pg μL^?1 for standard solutions and 2.5–200 pg μL^?1 with a limit of detection of 0.42 pg μL^?1 for serum samples. The method is applicable, covering a variety of pharmaceutical and biological studies. Metoclopramide was extracted from rabbit blood by liquid–liquid extraction using ether as the extraction solvent. The reproducibility of the method was found to be between 0.96 and 1.98 % (RSD) values. The proposed method has been extensively validated for the determination of metoclopramide in all working media. The sample preparations, flow rate and run time of the analytical systems are not time consuming. Moreover, for the stability of metoclopramide, the effect of temperature, UV light, H₂O₂, HCl and NaOH were also investigated.     

A Flow-Based Analytical Procedure for Salbutamol Determination Exploiting Chemiluminescence in a Liquid-Core Waveguide

Abstract

Salbutamol is a bronchodilator whose use is restricted due to its anabolic effects. A flow-based procedure for salbutamol determination based on the inhibition of chemiluminescence of the luminol/hypochlorite system was developed. A flow cell constructed with a liquid-core waveguide was employed to constrain the emitted radiation, minimizing losses during transport to detector. Linear response was observed within 2.5 × 10^?6 and 1.0 × 10^?5 mol L^?1 with a detection limit estimated as 1 × 10^?7 mol L^?1 at the 99.7% confidence level. The coefficient of variation (n = 20), sampling rate, and luminol consumption per determination were estimated as 2.8%, 164 determinations h^?1, and 50 µg, respectively. Results for pharmaceutical samples were in agreement with those obtained by reference procedures at the 95% confidence level.     

Kinetic Method for the Determination of α‐Methyldopa in Pharmaceutical Preparations: Analytical Procedure and Reaction Mechanism Considerations

Abstract

A reliable and very simple kinetic method is proposed for the determination of α‐methyldopa in pharmaceutical preparations. It is based of the oxidation of α‐methyldopa, a catechol derivative, to quinone, by the ferric ion in the presence of salicylic acid and HCl. The deep blue complex formed between iron(III) and salicylate (λ_max 525 nm) allows the reaction to be watched as absorbance decreases with the reduction of the ferric ions to ferrous with the consequent dissociation of the complex. Four pharmaceutical preparations were analyzed and the results were compared with those obtained with the spectrophotometric United States Pharmacopeia method. The statistical t‐Student and the F‐tests were applied to compare the results obtained with the two independent methods. In all cases complete agreement, in terms of accuracy and precision, was observed with a confidence level of 95% (α=0.05). Considering the four samples analyzed, using the proposed method, and five determinations for each sample, the observed mean relative standard deviation (RSD) is about 0.8%. The concentration range studied was from about 2×10^?4 mol L^?1 to 18×10^?4 mol L^?1 (about 40 µg/mL to 360 µg/mL) in the final solution and it is quite adequate for the analytical procedure at 25.0±0.1°C. A typical coefficient of determination, r², of the calibration curve, is 0.9994. For the kinetic pseudo first order curves a typical observed r² is 0.99998. The Arrhenius activation energy was found to be 84.2±3.4 kJ mol^?1. A schematic mechanism of the reaction is proposed.     

LC Method with Precolumn Derivatization for Analysis of Mexiletine in Pharmaceutical Preparations

A isocratic, selective and accurate LC method of analysis of mexiletine in pharmaceutical preparations has been developed and validated. The method is based on derivatization of mexiletine with 4-chloro-7-nitrobenzofurazan in pH 9.0 borate buffer to yield a yellow product. Chromatography was performed on a C₁₈ column (150 × 4.6 mm i.d.) with acetonitrile–water 80:20 (v/v) as mobile phase at a flow rate of 1.0 mL min^?1. UV–visible absorbance detection was performed at 458 nm. The retention time of the mexiletine derivative was 4.10 min, and response was a linear function of concentration in the range 0.5–4.0 μg mL^?1 (r = 0.9998). The limits of detection and quantification were 0.05 and 0.15 μg mL^?1, respectively. Method validation revealed precision, sensitivity, and robustness were acceptable. Low RSD values are indicative of high precision, and high recovery values are indicative of the accuracy of the method. Results obtained by use of the proposed method for analysis of the mexiletine content of pharmaceutical a preparation were compared with those obtained by use of the official method. The method has been used for analysis of pharmaceutical preparations.     

A New LC Method for Determination of Some Aminoglycoside Antibiotics in Dosage Forms and Human Plasma Using 7-Fluoro-4-nitrobenz-2-oxa-1,3-diazole as a Fluorogenic Pre-Column Label

A validated, selective and sensitive pre-column derivatization chromatographic method for determination of some aminoglycoside antibiotics, namely, amikacin (AMK), gentamicin and neomycin sulphates, has been developed. Determination was obtained by pre-column reaction of the samples with 7-fluoro-4-nitrobenz-2-oxa-1,3-diazole and separating the corresponding derivatives on a reversed phase LC column (ultrasphere C₁₈, 250 × 4.6 mm) and fluorescence detection (λ _ex 465 nm, λ _em 531 nm). Linear quantitative response curve was generated over a concentration range of 0.05–10 μg mL^?1 with a correlation coefficient of more than 0.999 with all studied compounds. The accuracy and precisions were satisfactory for determination of all drugs in dosage forms within- and between-run assay. Furthermore, the method was extended to the determination of AMK in spiked human plasma. The method is specific for the intact drugs, and can be adopted in the presence of co-formulated drugs.     

Determination of Diammonium Glycyrrhizinate and Its Antioxidant Activity Using a Novel Chemiluminescence System

A novel chemiluminescence (CL) system was established for the determination of diammonium glycyrrhizinate (DG) in pharmaceutical preparations and its ability of scavenging hydroxyl radical. It was shown that a strong CL signal was observed when Eosin Y mixed with Fenton reagent. The CL intensity was decreased significantly when DG was added to the reaction system and partially scavenged the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometrical relationship with DG concentration. Based on this, we developed a new method for the determination of DG using a flow injection chemiluminescence (FI-CL) technique. Under the optimal conditions, the linear range of DG concentration was 6.0 × 10^?8–5.0 × 10^?6 mol/L (R = 0.9982) with a detection limit of 8.0 × 10^?9 mol/L (SN = 3), and the RSD was 3.8% for 2.0 × 10^?7 mol/L DG (n = 11). This method was successfully used in the determination of DG in tablets and the evaluation of hydroxyl radical scavenging capacity of DG. The possible reaction mechanism of the CL system is discussed.