A hydrogel based fluorescent micro array used for the characterization of liquid analytes

A fluorimetric micro spot array using non-specific recognition function is described for the analysis of liquid samples. The array was composed of binary mixtures of various fluorescence dyes which were embedded in a hydrogel matrix. The interactions between the fluorescent dyes and their molecular surrounding inside the hydrogel, influence their fluorescence wave length and intensities. The array was used for the characterization of solvent mixtures. Developed fluorescence patterns of the complete array as well as the fluorescence intensity changes of single spots were analysed. It was proven, that specific analytical information can be gained using this non-specific recognition approach. The identification of some alcoholic beverages is described as an example of the application of this method when used for quality control purposes. Analogous to the appellation “electronic nose” and “electronic tongue” the described micro spot array acts as an “optochemical tongue”.     

Applications of array biosensor for detection of food allergens

Although food is a necessity, compounds within food products can be dangerous and life-threatening for people with food allergies. These allergy-causing compounds, such as proteins from eggs and milk, must be identified on the labels of commercial products. Unintentional contamination of food with these compounds occurs as a result of storage, manufacturing procedures, or cleaning procedures. A sensitive, specific, and rapid method to identify foods containing allergens is required by the food industry. The array biosensor, a rapid detection system, may provide a solution to this need. The array biosensor performs fluorescent immunoassays on the surface of a planar waveguide by first running samples, then fluorescently labeled antibodies, over a surface patterned with capture antibodies. An optical image is captured by a charged-coupled device camera and converted into fluorescence values. Signal intensity and spot location provide information on the compound and its concentration. The array biosensor has been successfully demonstrated for toxin, bacteria, and virus detection at low levels in under 20 min in food, clinical samples, and environmental matrixes. An assay for detection of ovalbumin as an indicator of egg contamination has been developed with limits of detection of 25 pg/mL in buffer and 1.3 ng/mL (13 ng/g) in non-egg pasta extract (buffer:pasta 10:1, v/w).     

An ultrasensitive immunosensor array for determination of staphylococcal enterotoxin B

Staphylococcal enterotoxin B (SEB) is a potent gastrointestinal toxin and is heat resistant. SEB is also a potential bioterrorism agent. The ability to measure accurately very low amounts of staphylococcal enterotoxin B in food and other samples is very important. A highly sensitive and stable sandwich fluorescence immunoassay based on a pair of monoclonal antibodies against SEB which were produced by us was developed. Classical sandwich immunoassay was adopted and the glass slides were used as the base of the immunologic reaction. The functionalized fluorescent core-shell silica nanoparticles were used as labels. The fluorescence issued from the labels was detected by a laser-induced fluorescence millimeter sensor array detection platform. The fluorescence intensity has a linear relationship with the amount of SEB in the range of 50 pg/mL-5 ng/mL, and the detection limit of SEB was 20 pg/mL (the absolute detection limit was 0.02 pg). The relative standard deviation (RSD) for 5 parallel measurements of SEB (1 ng/mL) was 9.2%.     

Fluorescence detection system for capillary separations utilizing a liquid core waveguide with an optical fibre-coupled compact spectrometer

A fluorescence detection system for capillary liquid separation methods is described. The system is based on a silica capillary coated with a low refractive index fluoropolymer Teflon AF that serves both as a separation channel and as a liquid core waveguide (LCW). A fibre-coupled laser excites separated analytes in a detection point and arising fluorescence is collected at one end of the LCW capillary into the other optical fibre which brings it to a compact charge-coupled device (CCD) array spectrometer installed in a desktop computer. No additional components such as focusing optics or filters are necessary. This system was used for detecting isoelectrically focused fluorescent low-molecular-mass pI (isoelectric point) markers and fluorescein isothiocyanate (FITC) labelled proteins. The ability of the system to acquire fluorescent spectra is also demonstrated.     

Reusable conductimetric array of interdigitated microelectrodes for the readout of low-density microarrays

Low-density protein microarrays are emerging tools in diagnostics whose deployment could be primarily limited by the cost of fluorescence detection schemes. This paper describes an electrical readout system of microarrays comprising an array of gold interdigitated microelectrodes and an array of polydimethylsiloxane microwells, which enabled multiplexed detection of up to thirty six biological events on the same substrate. Similarly to fluorescent readout counterparts, the microarray can be developed on disposable glass slide substrates. However, unlike them, the presented approach is compact and requires a simple and inexpensive instrumentation. The system makes use of urease labeled affinity reagents for developing the microarrays and is based on detection of conductivity changes taking place when ionic species are generated in solution due to the catalytic hydrolysis of urea. The use of a polydimethylsiloxane microwell array facilitates the positioning of the measurement solution on every spot of the microarray. Also, it ensures the liquid tightness and isolation from the surrounding ones during the microarray readout process, thereby avoiding evaporation and chemical cross-talk effects that were shown to affect the sensitivity and reliability of the system. The performance of the system is demonstrated by carrying out the readout of a microarray for boldenone anabolic androgenic steroid hormone. Analytical results are comparable to those obtained by fluorescent scanner detection approaches. The estimated detection limit is 4.0 ng mL⁻¹, this being below the threshold value set by the World Anti-Doping Agency and the European Community.     

多荧光光纤传感器及其在混合溶剂检测中的应用

微纳光纤与其他微纳结构的集成可以拓展荧光光纤传感器检测范围和集成度,是光纤传感领域的研究热点。目前,国际上关于荧光光纤传感器这一领域的研究还处于单一检测物荧光响应的阶段,对多检测物的多通道荧光响应仍存在很大挑战。本文结合微纳光纤的光波导性能以及有机荧光材料的光功能特性,制备了能够同时激发和收集多种荧光的微纳光纤,并将之应用于高性能荧光光纤传感器的制备。通过选用不同荧光波长的有机材料与凝胶掺杂,制备了多荧光发射的光纤涂层材料,可控构筑了多组分荧光检测剂掺杂凝胶涂层。利用荧光光谱结合色度图分析,确定检测物与色坐标的关系,实现了多检测物的多通道荧光响应,为实现多荧光光纤传感器的可控构筑提供了有益的借鉴和指导意义。     

Light emitting diode excitation emission matrix fluorescence spectroscopy

An excitation emission matrix (EEM) fluorescence instrument has been developed using a linear array of light emitting diodes (LED). The wavelengths covered extend from the upper UV through the visible spectrum: 370-640 nm. Using an LED array to excite fluorescence emission at multiple excitation wavelengths is a low-cost alternative to an expensive high power lamp and imaging spectrograph. The LED-EEM system is a departure from other EEM spectroscopy systems in that LEDs often have broad excitation ranges which may overlap with neighboring channels. The LED array can be considered a hybrid between a spectroscopic and sensor system, as the broad LED excitation range produces a partially selective optical measurement. The instrument has been tested and characterized using fluorescent dyes: limits of detection (LOD) for 9,10-bis(phenylethynyl)-anthracene and rhodamine B were in the mid parts-per-trillion range; detection limits for the other compounds were in the low parts-per-billion range (< 5 ppb). The LED-EEMs were analyzed using parallel factor analysis (PARAFAC), which allowed the mathematical resolution of the individual contributions of the mono- and dianion fluorescein tautomers a priori. Correct identification and quantitation of six fluorescent dyes in two to six component mixtures (concentrations between 12.5 and 500 ppb) has been achieved with root mean squared errors of prediction (RMSEP) of less than 4.0 ppb for all components.     

Development of an integrated optic oxygen sensor using a novel, generic platform

This paper describes the development of a generic platform for enhanced, integrated optic sensors based on fluorescence detection. The platform employs a novel optical configuration in order to achieve enhanced performance and has inherent multianalyte detection capability. The sensor element comprises a multimode ridge waveguide that has been patterned with an analyte-sensitive fluorescent spot, which is excited directly using a LED. The platform was applied to the detection of gaseous oxygen as a proof of principle. The sol-gel-derived sensor spots were doped with an oxygen-sensitive fluorescent dichlororuthenium dye complex and intensity-based calibration data were generated from the oxygen-dependent waveguide output. The sensor achieved a LOD of 0.62% and a resolution of less than 0.96% gaseous oxygen, which compares favourably with a similar, recently reported system. This device highlights the combination of inexpensive rapid prototyping techniques and a dedicated sensor enhancement strategy that together facilitate the production of an effective prototype sensor platform.     

Application of an intensified diode array system to diagnosis of matrix effects and the rapid sequential determination of thiamine and riboflavin with fluorescence detection

The unique capabilities of a multiple wavelength spectrofluorometer based on an intensified diode array detector are used for diagnosis of matrix effects and for rapid sequential determination of two analytes. This system is used to investigate problems due to background fluorescence, blank reactions, and scattering for the determination of thiamine in cereal and urine samples by a fluorometric kinetic procedure. A novel determination of thiamine and riboflavin in vitamin pills is based on monitoring the native fluorescence of riboflavin over one wavelength region, and the rate of formation of fluorescent thiochrome from thiamine over another wavelength region, after a computer-controlled change in the pH of the reaction mixture.     

Preliminary Evaluation of Mixed Dyes for Fingerprinting Non-Fluorescent Bacteria

Abstract

A rapid scanning fluorometer is used to obtain fluorescence spectral data characteristic of bacteria which do not readily produce fluorescent pigments. The data is generated in the form of an array of fluorescence intensity as a function of multiple excitation and emission wavelengths. Fluorescence spectral properties are introduced into the bacterial specimen using multiple dye mixtures for staining. The characteristic fluorescent fingerprints are believed to occur by preferential adsorption and reaction of bacterial cellular components with the individual dyes of the mixture. The procedure is found to be rapid and reproducible for the bacteria examined.     

A Fluorescence Quenching Method for the Determination of Nitrite with Indole

A new fluorescence quenching method has been developed to determine nitrite in water and food samples. The method is based on the reaction between nitrite and the fluorescent indole to form a compound which has no fluorescence in acidic medium. The fluorescence intensity was measured in 1 cm quartz cell with excitation and emission wavelengths of 285 and 350 nm, respectively. The relationship was obtained between the fluorescence intensity and nitrite concentration in the range 0.01–0.6 μg ml⁻¹. The detection limit was 2.5 ng ml⁻¹. The proposed method was applied to determine nitrite in water and food samples. The mechanism involved in the reaction was studied.     

Liquid chromatographic determination of Alternaria toxins in carrots

A liquid chromatographic (LC) method was developed for the determination of Alternaria radicina and A. alternata toxins in carrots. Toxins were extracted from carrot with an acidified mixture of water-methanol-acetonitrile. The filtered extract was divided in 2 parts that were purified by solid-phase extraction on a C18 column for the analysis of radicinin (RAD), altertoxin-I (ATX-I), alternariol (AOH), and alternariol methyl ether (AME), and on a polymeric Oasis HLB column for tenuazonic acid (TeA). Toxins were quantified by reversed-phase LC with UV diode array detection by using 2 consecutive isocratic mixtures of acetonitrile-sodium dihydrogen phosphate solution. Mean recoveries of TeA, ATX-I, AME, RAD, and AOH from carrots spiked at levels between 0.5 and 3.0 microg/g were 69, 71, 90, 36, and 78%, with mean within-laboratory repeatability of 14, 5, 4, 6, and 18%, respectively. The mean between-laboratory reproducibilities for the determination of TeA, ATX-I, AME, and RAD in spiked samples were 25, 22, 6, and 12%, respectively. Limits of detection (signal-to-noise ratio of 3) for RAD, TeA, ATX-I, AME, and AOH were 0.006, 0.02, 0.02, 0.01, and 0.005 microg/g, respectively. RAD was detected (0.16-13.9 microg/g) in 3 out of 266 carrot samples produced under organic conditions in 3 European locations, whereas A. alternata mycotoxins were not found in any tested samples.     

A multifunctional upconversion nanoparticles probe for Cu2+ sensing and pattern recognition of biothiols

Lanthanide-doped upconversion nanoparticles (Ln-UCNPs) are a new type of nanomaterials with excellent fluorescence properties, which are well applied in fluorescent biosensing. Herein we developed a multifunctional probe based on the surface engineering of core-shell structure UCNPs with polyacrylic acid (PAA). The developed PAA/UCNPs probe could be highly selective to detect and respond to Cu²⁺ at different pH. Cu²⁺ could easily combine with the carboxylate anion of PAA to quench the fluorescence of UCNPs. Therefore, we creatively proposed a fluorescent array sensor (PAA/UCNPs-Cu²⁺), in which the same material acted as the sensing element by coupled with pH regulation for pattern recognition of 5 thiols. It could also easily identify the chiral enantiomer of cystine (l-Cys-and d-Cys), and distinguish their mixed samples with different concentrations, and more importantly, it could be combined with urine samples to detect actual level of homocysteine (Hcys) to provide a new solution for judging whether the human body suffers from homocystinuria.     

Complete suppression of the fluorophore fluorescence by combined effect of multiple fluorescence quenching groups: A fluorescent sensor for Cu with zero background signals

The reaction-based fluorescent sensors have attracted increasing attention in the past decades. However, the application of these sensors for accurate sensing was significantly retarded by the background fluorescence from the sensors themselves. In this work, we demonstrated a novel strategy that the background fluorescence of the sensor could be completely eliminated by the combined effect of multiple fluorescence quenching groups. Based on this new strategy, as proof-of-principle study, a fluorescent sensor (CuFS) for Cu²⁺ was judiciously developed. In CuFS, three types of fluorescence quenching groups were directly tethered to a commonly used coumarin fluorophore. The fluorescence of coumarin fluorophore in CuFS was completely suppressed by the combined effect of these fluorescence quenching groups. Upon treatment with 22 μM Cu²⁺, sensor CuFS achieved a dramatic fluorescence enhancement (fluorescence intensity enhanced up to 811-fold) centered at 469 nm. The detection limits was determined to be 12.3 nM. The fluorescence intensity enhancement also showed a good linearity with the Cu²⁺ concentration in the range of 12.3 nM to 2 μM. By fabricating test strips, sensor CuFS can be utilized as a simple tool to detect Cu²⁺ in water samples. Furthermore, the fluorescent sensor was successfully applied in detecting different concentration of Cu²⁺ in living cells.     

Analysis of ochratoxin A in milk after direct immunoaffinity column clean-up by high-performance liquid chromatography with fluorescence detection

The present work describes a new analytical method for direct immunoaffinity column clean-up of ochratoxin A (OTA) in milk samples followed by determination of the toxin using high-performance liquid chromatography with fluorescence detection (HPLC-FD). Two different immunoaffinity cartridges (IAC) were investigated, and Ochraprep columns were chosen because they showed the best results. An average recovery of 89.8% and a mean RSD of 5.8% for artificially contaminated cow's milk in the range of 5-100 ng/L were attained. The calculated limit of detection (LOD) and limit of quantitation (LOQ) were as low as 0.5 and 5 ng/L, respectively. This new easy and fast method avoids a previous liquid-liquid extraction step and therefore the use of toxic chlorinated solvents. Chromatograms of the final extracts were clean and OTA could be easily detected at a retention time of 8.4 min without interferences. To assess the presence of the toxin in cow's milk eight samples of skimmed and four samples of whole milk were analysed and OTA was not detected over the established detection limit.     

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone derivatives based fluorescent probes for mercury(II) via an intramolecular proton transfer mechanism

2-(2′,5′-Dihydroxy-phenyl)-4(3H)-quinazolinone (DHPQ), a new fluorescent dye that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesised and used as fluorescent probe for detection of Hg²⁺. Mercuric ions can be detected and quantitated by measuring the fluorescent intensity decrease of the probe. The decrease of fluorescence intensity of DHPQ upon the addition of Hg²⁺ was attributed to the blocking of ESIPT reactions of DHPQ and quenching its fluorescence. The analytical performance characteristics of the proposed Hg²⁺ probe were investigated. The probe can be applied to the quantification of Hg²⁺ with a concentration range covering from 8.0?×?10^?7 to 2.0?×?10^?4?mol?L^?1, with a working pH range of 5.5–6.5. It shows excellent selectivity for Hg²⁺ over other transition metal cations. The proposed method was testified for the Hg²⁺ assay in river water samples with satisfying recoveries.     

Application of europium(III) chelates-bonded silica nanoparticle in time-resolved immunofluorometric detection assay for human thyroid stimulating hormone

Eu(III) chelate-bonded silica nanoparticle was used as a fluorescent label to develop a highly sensitive time-resolved immunofluorometric assay (TrIFA) for human thyroid stimulating hormone (hTSH). The limit of detection of the assay calculated according to the 2SD method was 0.0007 mIU L⁻¹ and became 0.003 mIU L⁻¹ when serum-based matrix was used for calibrators, indicating that this TrIFA is comparable with the most sensitive assays. The linear range was from 0.005 to 100 mIU L⁻¹ of hTSH with coefficient of variation between 1.9% and 8.3%. The correlation study using 204 blood spot samples from newborns showed that the results from this new method were coincident with that of the commercial dissociation-enhanced lanthanide fluorescence immunoassay (DELFIA) system, with a correlation coefficient of 0.938. The fluorescent nanoparticle label allows directly reading the fluorescent signal, omitting the signal development step required for the DELFIA system, and the whole procedure of this assay is fulfilled within 2 h. Thus, we developed a novel, sensitive, quantitative and simple nanoparticle label-based TrIFA assay, suitable for routine application in hTSH screening of neonatal hypothyroidism.     

Optical Determination of Cholesterol in Milk with Molecularly Imprinted Polymer-Coated Quantum Dots

Fluorescent molecularly imprinted polymer-coated CdSe/ZnS quantum dots were prepared in an efficient one-step synthesis. Their application as fluorescent nanoparticles for the direct quantification of cholesterol in milk was characterized. The quantum dots were used as cores to produce fluorescence. The molecularly imprinted polymer shells provided specific binding sites for cholesterol. The system exhibited good linearity for cholesterol from 0.5 to 150?µg?mL^?1, a low detection limit of 0.15?µg?mL^?1, and acceptable reproducibility with a relative standard deviation of 4.2% for six replicates. The molecularly imprinted polymer-coated quantum dots were used to determine cholesterol in fortified milk. Recoveries were from 87.0 to 105.2% and a possible mechanism is proposed. The fluorescent molecularly imprinted polymer-coated quantum dots exhibited excellent selectivity and provide a simple, rapid, selective, and effective analytical approach.     

Transition from Micelles to Microemulsions in Sugar-Based Surfactant Systems Probed by Fluorescence Spectroscopy and Atomic Force Microscopy

The systems investigated by fluorescence spectroscopy and atomic force microscopy were water/sucrose laurate/oil + ethanol. The oils were R (+)-limonene and isopropylmyristate. The mixing ratio (w/w) of ethanol/oil equals unity. The fluorescent probes auramine-O and 8-anilino-1-naphthalenesulfonic acid were used to determine the minimum ω′ value for the transition of reverse micelles to microemulsions in the systems based on the two oils, as well as at different surfactant contents. The fluorescence quenching of Safranine-T (3, 6-diamino-2,7-dimethyl-5 phenyl phenazinium chloride) by the inorganic ions Fe²⁺, Fe³⁺, and Cu²⁺ was studied in reverse micelles and microemulsions. The Stern-Volmer quenching constants at different water/surfactant molar ratios (ω values) were calculated from the data of the quenching process. Atomic force microscopy was used to image the systems based on the two oils for different water to surfactant molar ratios below and above the minimum ω′ value.     

Fluorescence Spectroscopy Study of Polyoxyethylene Surfactant Micellar Systems

The systems investigated by fluorescence spectroscopy and atomic force microscopy were water/ethoxylated mono, di-glyceride/oil + ethanol. The oils were R (+)-limonene and isopropylmyristate. The mixing ratio (w/w) of ethanol/oil equals unity. The fluorescent probes auramine-O and 8-anilino-1-naphthalenesulfonic acid were used to determine the minimum ω′ value for the transition of reverse micelles to microemulsions in the systems based on the two oils, as well as at different surfactant contents. The fluorescence quenching of Safranine-T (3,6-diamino-2,7-dimethyl-5 phenyl phenazinium chloride) by the inorganic ions Fe²⁺, Fe³⁺ and Cu²⁺ was studied in reverse micelles and microemulsions. The Stern–Volmer quenching constants at different water/surfactant molar ratios (ω values) were calculated from the data of the quenching process. Atomic force microscopy was used to image the systems based on the two oils for different water to surfactant molar ratios below and above the minimum ω′ value.