Investigation on properties of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–MWCNTs composites as cathode materials

An effective method to prepare the composites of multi-wall carbon nanotubes (MWCNTs) and vanadium pentoxide (V₂O₅) was presented. Vanadyl-triisopropoxide (VO(OC₃H₇)₃) was used as the starting material, MWCNTs pretreated with acids by a two-step process was used as the conductive ingredient. V₂O₅–MWCNTs composites were synthesized via a sol–gel method with solvent exchange and an ambient pressure drying technique. The samples were characterized by SEM, TEM, XRD, BET, Raman spectra and electrical resistivity measurement respectively. The experimental results indicate that the V₂O₅–MWCNTs nanocomposite has a fiber-like and tri-dimensional network structure. Its surface area is up to 189.7 m²/g when the MWCNTs’ content is 15 wt%. And MWCNTs are dispersed homogeneously in the composites. The electrical resistivity of the composites decreases from 1,239 to 765 Ω·cm when the MWCNTs’ content increases from 0 to 10 wt%. Thus MWCNTs can improve properties of V₂O₅ aerogels as the cathode material in lithium batteries.     

Facile synthesis of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> core–shell nanobelts

We report a facile chemical approach for the synthesis of one-dimensional V₂O₅/TiO₂ core–shell nanobelts. The coated V₂O₅ nanobelts are synthesized by a hydrothermal method which is feasible for large-scale production. V₂O₅ nanobelts coated with a thin layer of TiO₂ sol are formed before sintering, and after sintering one-dimensional V₂O₅/TiO₂ core–shell nanobelts, composed of single-crystalline V₂O₅ nanobelts cores uniformly coated with anatase TiO₂ nanoparticle shells are obtained. The influences of the synthetic parameters, such as sintering temperature and titanium/vanadium mole ratios, on the morphology of the resulting products are investigated. Interestingly, the shape of single-crystalline of V₂O₅ nanobelts is totally preserved after sintering; the morphology can be readily controlled to be smooth or rough by altering the sintering temperature of the shells and titanium/vanadium mole ratio.     

Reactivity of the oxides in the ternary V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CuO-α-Sb<Subscript>2</Subscript>O<Subscript>4</Subscript> system in air

In this work it has been established which compounds finally are formed in air in the two-component CuO-V₂O₅ and CuO-α-Sb₂O₄ systems. Unknown thermal properties of CuV₂O₆, Cu₂V₂O₇ and Cu₁₁V₆O₂₆ have been established. Reactivity of the oxides and phase relations in the ternary V₂O₅-CuO-α-Sb₂O₄ system in air have been studied by using XRD and DTA methods. The results have showed the reaction of V₂O₅, CuO with α-Sb₂O₄ does not produce any compound where all the three oxides would be involved. It has been established that the α-Sb₂O₄ reacts and forms binary phases independently with CuO or V₂O₅. On the base of these results the investigated system was divided into subsidiary subsystem in which CuSb₂O₆ remains at equilibrium in the solid state with other phases formed in corresponding binary systems.     

Preparation specifics and properties of AMn<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript> (А = Ca,Ce, and Sm) high-pressure phases

Perovskite-like phases AMn₃V₄O₁₂ (A = Ca, Ce, and Sm) were prepared under borothermic conditions (p = 7.0–9.0 GPa, T = 700–1100°C). Their X-ray diffraction structure (space group Im \(\bar 3\), Z = 2) was determined, and unit cell parameters were calculated: for CaMn₃V₄O₁₂: а = 7.40824(3) Å, for SmMn₃V₄O₁₂: а = 7.45280(8) Å, and for CeMn₃V₄O₁₂: а = 7.46965(4) Å. The temperature-dependent electrical resistivity (10–300 K) and magnetic susceptibility (2–300 K) of the prepared phases were studied.     

Preparation,characterization and catalytic studies of V<Subscript>2</Subscript>O<Subscript>5</Subscript>–SiO<Subscript>2</Subscript> xerogel composite

In this work, we report the synthesis, characterization and catalytic properties of a vanadium oxide–silicon oxide composite xerogel prepared by a soft chemistry approach. In order to obtain such material, we submitted a vanadium pentoxide gel previously synthesized via protonation of metavanadate species to an “in situ” progressive polycondensation into silica gel. The material has been characterized by X-ray diffraction, infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. Further, the catalytic activity of this material was evaluated for the epoxidation of styrene and cyclooctene using iodosylbenzene, hydrogen peroxide and m-chloroperbenzoic acid as the oxidizing agent.     

Thermal properties of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–PbO–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glass system

Thermal behavior of xGa₂O₃–(50 − x)PbO–50P₂O₅ (x = 0, 10, 20, and 30 mol.% Ga₂O₃) and xGa₂O₃–(70 − x)PbO–30P₂O₅ (x = 0, 10, 20, 30, and 40 mol.% Ga₂O₃) glassy materials were studied by thermo-mechanical analysis (TMA) and differential thermal analysis (DTA). Replacement of PbO for Ga₂O₃ is accompanied by increasing glass-transition temperature (263 ≤ T _g/°C ≤ 535), deformation temperature (363 ≤ T _d/°C ≤ 672), crystallization temperature (396 ≤ T _c/°C ≤ 640) and decreasing of coefficient of thermal expansion (5.1 ≤ CTE/ppm K⁻¹ ≤ 16.7). Values of Hruby parameter were determined (0.1 ≤ K _H ≤ 1.3). The thermal stability of prepared glasses increases with increasing of concentration of Ga₂O₃.     

Catalytic properties of Fe/SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> systems,obtained via sol–gel method

The high efficacy of iron-containing catalysts based on SiO₂–Al₂O₃ systems obtained via sol–gel method in the oxidative destruction of carmoisine azo dye in aqueous solutions is demonstrated. It is found that the stability of the catalysts with respect to the leaching of iron ions into a solution during catalysis grows along with the aluminum content in the composition of aluminosilicate supports. It is concluded that the synthesized catalysts are promising materials for purifying wastewaters contaminated with organic dyes.     

Synthesis and physicochemical study of M<Subscript>4</Subscript>Na<Subscript>2</Subscript>V<Subscript>10</Subscript>O<Subscript>28</Subscript> · 10H<Subscript>2</Subscript>O (M=K,Rb, NH<Subscript>4</Subscript>)

The formation conditions and physicochemical properties of binary decavanadates M₄Na₂V₁₀O₂₈ · 10H₂O (M=K, Rb, NH₄), synthesized by crystallization from saturated solutions of the NaVO₃-MH₂AsO₄-H₂O systems, were studied by chemical analysis, X-ray powder diffraction, microscopy, thermogravimetry, and IR spectroscopy. To optimize the synthesis conditions of M₄Na₂V₁₀O₂₈ · 10H₂O, the ( 1-x)NaVO₃ · 2H₂O · xMH2AsO4-H₂O (0.2 ≤ x ≤ 0.8) isomolar series method was applied to studying the interaction in the NaVO₃-MH₂AsO₄-H₂O systems (M = K, Rb, Cs) at the 0.4 mol/L total molar concentration of NaVO₃ and MH₂AsO₄ in solutions. The studied M₄Na₂V₁₀O₂₈ · 10H₂O compounds were shown to be isostructural with triclinic crystals (Z= 1, space group P $ \bar 1 $ \bar 1 ), and their unit cell parameters were estimated.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Concentration Space of Homogeneous Garnet in the System Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–(Y,Bi)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The concentration space of homogeneous garnet in the system Ga₂O₃–(Y, Bi)₃(Fe, Ga)₅O₁₂–Fe₂O₃ was determined by X-ray powder diffraction analysis. The obtained results expand the knowledge of the possible variations of cation ratios Y : Bi : Fe : Ga in garnet, which can be used for searching for and creating new stable magneto-optical materials.     

Phase formation in Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-K<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MMoO<Subscript>4</Subscript> (M = Ca,Pb, Ba) systems and the crystal structure of α-KLiMoO<Subscript>4</Subscript>

Solid-phase interactions in Li₂MoO₄-K₂MoO₄-MMoO₄ (M = Ca, Pb, Ba) systems were studied, and the subsolidus regions of these systems were triangulated. The lead and barium systems were studied in a more detailed way to discover that, along KLiMoO₄-K₂M(MoO₄)₂ (M = Pb, Ba), KLiMoO₄-PbMoO₄, and Li₂MoO₄-K₂Ba(MoO₄)₂ quasi-binary sections, there are homogeneity regions reaching 6–11 mol % based on K₂M(MoO₄)₂ and lead molybdate. Triple molybdates are formed in none of the systems, which is verified by experiments on spontaneous crystallization from solution in melt. Crystallization experiments yielded crystals of potassium dimolybdate and simple and double molybdates from the boundary systems. The crystal structure was solved for a hexagonal KLiMoO₄ phase: (Na,K){ZnPO4}, a = 18.8838(7) Å, c = 8.9911(6)Å, Z = 24, space group P6₃, R = 0.065. The structure comprises a three-dimensional tridymite framework built by an alternation of corner-sharing LiO₄- and MoO₄ tetrahedra wherein voids are occupied by potassium cations.     

Adsorption of chlorobenzene vapor on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst under dynamic conditions

Adsorption dynamics of chlorobenzene vapors on a 5% V₂O₅/Al₂O₃ catalyst has been investigated using the frontal chromatography technique. The uptakes of chlorobenzene have been measured as a function of vapor concentration and adsorption equilibrium has been found to follow formally the Langmuir isotherm. The breakthrough time proved to be a linear function of the column length as expected. Breakthrough profiles have been reported for different experimental conditions and quantitatively fitted by a reduced lumped diffusion model. This model provides an analytical solution that facilitates engineering calculations. Model parameters show complex behavior as functions of stream characteristics and depend on column length. When empirical expressions relating model mass transfer coefficients with influencing variables are found the model demonstrates good accuracy in predicting column performance.     

Distribution of niobium and lanthanum between two immiscible melts in the system LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The system LaPO₄–SiO₂–NaF–Nb₂O₅–Fe₂O₃ is characterized by immiscibility fields in the liquid state region. Addition of iron expands fields of immiscibility of melts and decreases the temperature of their coexistence. A fraction of 87–90% of niobium is extracted into iron silicate melt, and 92–98% of lanthanum is extracted into phosphate salt melt.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Coexistence of Immiscible Liquid Phases in the LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> System

It was determined that the system LaPO₄–SiO₂–NaF–Nb₂O₅ within the temperature range 850–1200°C has regions of immiscibility of liquid phases (silicate and phosphate–salt melts). The coexisting melts have contrast chemical and phase compositions and structural-textural features, because of which the methods for extracting rare-earth elements and niobium from these melts differ. The silicate melts form glass, whereas the phosphate–salt melts have high crystallization ability. The mutual solubility of the liquid phases does not exceed 5%. The components of the system are contrastively distributed between the silicate and phosphate–salt melts. A fraction of 95–97% of niobium is extracted into the silicate melt, and 93–95% of La and P is extracted into the phosphate–salt melt.     

Conduction and Transport Numbers in Metacomposites MeWO<Subscript>4</Subscript> ⋅ WO<Subscript>3</Subscript> (Me = Ca,Sr, Ba)

The conduction and transport numbers of charge carriers for composites in the systems MeWO₄-WO₃ (Me = Ca, Sr, Ba) are studied as a function of the temperature and the activity of oxygen in a gas phase. The transport numbers are determined by an emf method and are estimated from dependences of conductance on the activity of oxygen in a gas phase. The deficiencies of the given procedure as applied to investigation of properties of composite phases are analyzed. The materials under study are classified with a class of metacomposites. The concentration intervals of the ionic, mixed, and electronic conductions are determined. The conduction of composites of compositions (100 − x)MeWO₄ ⋅ xWO₃ is predominantly ionic at x ≤ 10 (Me = Ca), x ≤ 60 (Me = Sr), and x ≤ 45 (Me = Ba). The obtained data are explained in the framework of a model that represents a composite as a distributed matrix system where a film of surface phase MeW-s with a high mobility of oxygen ions plays the role of a connected matrix. It is presumed that the surface phase MeW-s possesses double-sided surface activity (α _MeW-s ≤ ) and a higher mobility with respect to MeWO₄ and WO₃. The discovered anomalies of dependences (T) and partial dependences , σ_el(T) are explained by a change in the stoichiometry, morphology, and the degree of connectedness of surface phase MeW-s caused by with a change in the temperature and composition of composites.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 680–693.Original Russian Text Copyright © 2005 by Neiman, Pestereva, Sharafutdinov, Kostikov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Synthesis of nanopowders and physicochemical properties of ceramic matrices of the LaPO<Subscript>4</Subscript>–YPO<Subscript>4</Subscript>–(H<Subscript>2</Subscript>O) and LaPO<Subscript>4</Subscript>–HoPO<Subscript>4</Subscript>–(H<Subscript>2</Subscript>O) systems

Sol-gel method was used to synthesize nanosize powders in the LaPO₄–YPO₄–(H₂O) and LaPO₄–HoPO₄–(H₂O) systems. Dense ceramic samples with high microhardness (up to 25 GPa) were formed from these powders by sintering at temperatures of up to 1600°C. The isomorphic capacity of the monoclinic LaPO₄ matrix for the second component (yttrium or holmium) simulating radioactive nuclides of the actinide-rare-earth fraction was found to be high. The composites are stable in aqueous solutions, which is indicated by the low concentration of lanthanum and yttrium ions during leaching test (~10^–7 g L^–1). The results obtained in the study can be used to develop new high-efficiency ceramic matrices for solidification of the actinide-rare-earth fraction of liquid wastes formed in processing of the spent nuclear fuel.     

Effect of Fe-zeolite on formation of N<Subscript>2</Subscript>O in selective reduction of NO by NH<Subscript>3</Subscript> over V<Subscript>2</Subscript>O<Subscript>5</Subscript>–WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> catalyst

An approach for significantly suppressing N₂O formation in reduction of NO by NH₃ over V₂O₅–WO₃/TiO₂ (VWT) catalyst has been studied by coating different amounts of a Fe-exchanged zeolite (FeZ) onto the catalyst. FeZ-promoted VWT samples were characterized using N₂ sorption, X-ray diffraction (XRD) analysis, and NH₃ adsorption/desorption techniques to understand the primary role of FeZ in lowering N₂O production levels. At high temperatures (≥450 °C), VWT gave N₂O production with high concentrations, while N₂O formation was noticeably reduced when using FeZ-promoted catalysts, which also showed somewhat lower NO removal activities (<5 %) at all temperatures. N₂ sorption and XRD measurements revealed no perceptible physical or chemical alterations of each constituent, even in VWT catalysts after FeZ coating following high-temperature calcination. Adsorption of NH₃ on unpromoted and FeZ-promoted catalysts and subsequent desorption yielded very complicated spectra for N₂O that might primarily come from NH₃ oxidation, and the interaction between V–NO species at temperatures >580 °C. NO on neighboring sites seems to be produced via decomposition of N₂O generated at lower temperatures. The FeZ in the promoted VWT catalysts could be responsible for N₂O decomposition and N₂O reduction with unreacted NH₃ at temperatures >400 °C, thereby significantly lowering N₂O emission levels. This promotional effect bodes well for use in many industrial deNO _x applications.     

Phase equilibria,charge transport,and mass transport in Sr<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript>-“M<Subscript>4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript>” (M = Cd,Cu, Ni,and Zn) systems

Homogeneous fields of Sr_{4 − x} M _x Nb₂O₉ (M = Cd, Cu, Ni, or Zn) solid solutions were determined using powder X-ray diffraction. Phase fields were plotted proceeding from the tolerance factor t and electronegativity ratio $ \bar k_A /\bar k_B $ \bar k_A /\bar k_B with a satisfactory fit of experimental results. Thermogravimetry was used to establish the major kinetic laws of solid-phase synthesis (conversion, rate-controlling stage, and effective activation energy) in (4 − x)SrCO₃ + xMO + Nb₂O₅ powdery mixtures. Direct radiometry was used to determine ⁹⁰Sr, ⁶³Ni, and ⁶⁵Zn self-diffusion coefficients in solid solutions based on the Sr₄Nb₂O₉ phase. Electrical conductivity was measured as a function of temperature for all Sr₄Nb₂O₉-“M₄Nb₂O₉” samples. The conductivity of Sr_{4 − x} M _x Nb₂O₉ (M = Cd, Cu, Ni, or Zn) solid solutions has a mixed ion-electron character.