Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

Electrocatalytic oxidation of ascorbic acid and voltammetric determination with a ferrocene-modified platinum electrode

Ferrocene attached to the surface of a platinum electrode catalyses the electrochemical oxidation of ascorbic acid in acidic buffer solutions. The overpotential for ascorbic acid oxidation is decreased by 150 mV at pH 2.2 compared with reaction at bare platinum; and an increase in anodic current and decrease in cathodic current for the redox reaction of ferrocene occurs on addition of ascorbic acid to the solution. The ferrocene-modified electrode is useful for the voltammetric determination of ascorbic acid in natural fruit juices. The advantages result from the electrocatalytic effect and from the prevention of adsorption of inhibitory substances from solution.     

Electrochemical determination of ascorbic acid using the poly-cysteine film-modified electrode

A poly(L-cysteine) thin film was prepared onto electrode surface via electropolymerization. In pH 7.0 phosphate buffer, L-cysteine was oxidized during the cyclic potential sweep between −0.60 and 2.00 V, forming a thin film at the glassy carbon electrode (GCE) surface. The electrochemical behaviors of ascorbic acid at the bare GCE and the poly(L-cysteine) film-coated GCE were investigated. The oxidation peak potential of ascorbic acid shifts to more negative potential at the poly(L-cysteine) film-modified GCE. Moreover, the oxidation peak current significantly increases at the poly(L-cysteine) film-modified GCE. These phenomena indicate that poly(L-cysteine) film shows highly-efficient catalytic activity to the oxidation of ascorbic acid. Based on this, a sensitive and simple electrochemical method was proposed for the determination of ascorbic acid. The oxidation peak current of ascorbic acid is proportional to its concentration over the range from 1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ mol l⁻¹. The limit of detection is evaluated to be 4.0 × 10⁻⁷ mol l⁻¹.     

Plant tissue-based amperometric electrode for eliminating ascorbic acid interferences

An application of tissue-based electrodes aimed at eliminating interferences from co-existing electroactive constituents is described. The concept is illustrated using a zucchini-containing carbon paste electrode. The presence of the enzyme ascorbic acid oxidase (AAO) in the zucchini tissue effectively eliminates contributions from ascorbic acid, thus allowing selective measurement of dopamine or norepinephrine. In comparison with analogous enzyme-based AAO electrodes, the tissue “eliminator” electrode offers high biocatalytic stability and activity and extremely low cost. The effects of various experimental variables are studied using pulse voltammetry, chronoamperometry and flow-injection amperometry. The electrode has a useful lifetime of 4 weeks. Simultaneous elimination of uric acid interferences is obtained via the co-immobilization of uricase. Oxygen background currents are eliminated in the presence of ascorbic acid.     

Electrocatalytic oxidation of uric acid at an electrodeposited redox polymer film-modified gold electrode

A hydrated osmium complex-containing redox polymer film-modified gold electrode based on electrochemical cross-linking was developed. The amount and the characteristics of redox polymer film cross-linked on the gold electrode were investigated by using electrochemical quartz crystal microbalance (EQCM). The redox polymer film exhibited a strong electrocatalytic activity toward the oxidation of uric acid with a lowering of the overpotential by about 230 mV and a large increase in the magnitude of the oxidation peak current. Based on this procedure, an amperometric method for the determination of uric acid concentration was proposed.     

Electrocatalytic determination of ascorbic acid on a glassy carbon electrode chemically modified with cobalt pentacyanonitrosylferrate.

An electrochemically prepared thin film of cobalt pentacyanonitrosylferrate (GC/CoPCNF) was used as a surface modifier for glassy carbon electrodes. The oxidation of ascorbic acid on a glassy carbon electrode modified with GC/CoPCNF as a working electrode was studied using cyclic voltammetry, rotating disk electrode (RDE) voltammetry and chronoamperometry in a 0.25 M KNO3 + 0.25 M phosphate buffer (pH 7) solution. The glassy carbon modified with CoPCNF showed good electrocatalytic activity toward ascorbic acid oxidation. The kinetics of the catalytic reaction was investigated, and the average value of the rate constant (k) for the catalytic reaction and the diffusion coefficient (D) were evaluated by different approaches for ascorbic acid, and were found to be 3.3 +/- 0.3 x 10(2) M(-1) s(-1) and 3.2 +/- 0.3 x 10(-6) cm2 s(-1), respectively.     

Square wave voltammetry for analytical determination of paracetamol using cobalt microparticles film modified platinum electrode

Cobalt microparticles (Co MPs) modified Pt electrode is simply and conveniently fabricated. The electrochemical properties of paracetamol (PCT) at the prepared modified electrode are investigated using cyclic voltammetry (CV) and square wave voltammetry (SWV) measurements. Based on these techniques, a sensitive and rapid electrochemical method is developed for the determination of PCT. The result indicates that the oxidation of PCT is strongly improved at the Co MPs/Pt electrode as compared with the bare Pt electrode, with relatively high sensitivity, stability and life time. The determination of PCT on the Co MPs/Pt with square wave voltammetry displays a high sensitivity of 101 μA/mM and a low detection limit of 0.42 μM (S/N = 3) in the range (0.5–100 μM). The sensitivity of the modified electrode for the detection of PCT is almost 17 times greater than on the bare Pt electrode. The proposed method is successfully applied to the PCT determination in tablets.     

beta-Cyclodextrin-ferrocene inclusion complex modified carbon paste electrode for amperometric determination of ascorbic acid

Inclusion complex of ferrocene (Fc) with beta-cyclodextrin (beta-CD) has been synthesized in ethylene glycol. It was unsolvable in water and had been successfully used to the preparation of beta-CD-Fc inclusion complex modified carbon paste electrode (CFCPE). Solid paraffin was used as the binder of the electrode. Ascorbic acid (AA) was electrocatalytically oxidized at the electrode in NH(3)-NH(4)Cl buffer (pH 10.0) with a anodic peak potential of +0.20 V (vs. SCE). The anodic current was proportional to the concentration of AA in the range 1.0x10(-3)-5.0x10(-7) mol l(-1) with the detection limit of 1.0x10(-7) mol l(-1). Using the inclusion complex as the electroactive substance greatly increased the stability and reproducibility of CFCPE than using Fc; the lifetime of the electrode can be over 1 year. Because CFCPE responds rapidly and sensitively, it has been successfully applied to the determination of AA in fruit juices.     

Copper modified platinum electrode for amperometric detection of spectinomycin sulfate by anion-exchange chromatography

A La~(3+)-Cu/Pt modified electrode was fabricated by electrodepositing process in CuSO_4 solution by adding a small amount of lanthium compound,and it was employed for direct current(DC) amperometric detection of spectinomycin by anion-exchange chromatography.Without derivatization,this method can simultaneously determine the main component and impurities in spectinomycin pharmaceutical raw material.Ease of preparation,being applied in DC detection mode and good catalytic stability confirmed the interest...     

A high-sensitive amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on gold colloid/L-cysteine/gold colloid/nanoparticles Pt-chitosan composite film-modified platinum disk electrode

A hemoglobin (Hb)/gold colloid (nano-Au)/L-cysteine (L-cys)/nano-Au/nanoparticles Pt (nano-Pt)-chitosan (CHIT) composite film-modified platinum disk electrode (abbreviated to modified electrode) has been prepared to construct a biosensor for determination of H(2)O(2). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The morphologies of different composite film were investigated with scanning electron microscopy (SEM) and the element of composite film was investigated with X-ray photoelectron spectroscopy (XPS). Analytical parameters such as pH and temperature were also studied. The linear range for the determination of H(2)O(2) is 1.4 x 10(-7) to 6.6 x 10(-3)mol/L with a detection limit of 4.5 x 10(-8)mol/L (S/N=3). The sensor achieved 95% of the steady-state current within 10s. The sensor exhibited high sensitivity (17.62 microA/(mmol L)), selectivity and stability. The method is applied to the determination of H(2)O(2) with satisfactory results.     

Simultaneous voltammetric determination of ascorbic acid and uric acid using a Nafion/multi-wall carbon nanotubes composite film-modified electrode

A Nafion/multi-wall carbon nanotubes (MWNT) composite film-modified electrode was fabricated. The modified electrode showed excellent electrocatalytic activity toward ascorbic acid (AA) and uric acid (UA) in 0.1-mol L⁻¹ NaCl medium (pH 6.5). Compared to the bare electrode that only displayed a broad and overlapped oxidation peak, the Nafion/MWNT film-modified electrode not only remarkably enhanced the anodic peak currents of AA and UA but also avoided the overlapping of the anodic peaks of AA and UA with a 320-mV separation of both peaks. Under the optimized conditions, the peak currents of AA and UA were proportional to their concentration at the ranges of 8.0 × 10⁻⁵ to 6.0 × 10⁻³ mol L⁻¹ and 6.0 × 10⁻⁷ to 8.0 × 10⁻⁵ mol L⁻¹, respectively. The proposed method was used for the detection of AA and UA in real samples with satisfactory results.     

Gold electrodes from compact discs modified with platinum for amperometric determination of ascorbic acid in pharmaceutical formulations

A simple, rapid and precise amperometric method has been developed for quantification of ascorbic acid (AA) in pharmaceutical formulations using flow-injection analysis (FIA). A slice of recordable compact disc (CD) modified by electrodeposition of platinum was employed as the working electrode. The proposed flow system allows determinations in the 1 mumol l(-1) of the analyte and enables 90 determinations per h, employing only 150-mul sample. The method permits the direct quantification of ascorbic acid in many pharmaceutical products, avoiding cumbersome processes as previous separations, solvent extraction or sample filtration. This new procedure was applied to commercial pharmaceutical tablets and the results obtained were identical than the ones obtained by the classical iodometric method. The calibration plots for freshly prepared ascorbic acid standards were highly linear in the concentration range of 1-10 mumol l(-1) with a relative standard deviation (R.S.D.) <1%. For all real samples studied, the deviations were situated between 0.5 and 8.7%.     

Flow injection-pulse amperometric detection of ephedrine at a cobalt phthalocyanine modified carbon paste electrode

Direct detection of ephedrines and other underivatized amino compounds (amines, alicyclic amines, alkanolamines, and amino acids) can be carried out via electrocatalytic oxidation at a carbon paste electrode (CPE) modified with cobalt phthalocyanine (CoPC) in alkaline solution (0.10 mol L-1 NaOH). Most of the amino compounds tested could be determined using the CoPC/CPE in an amperometric flow detector. The analytical signal of ephedrine was stabilised by alternating the potential between an anodic detection potential of +0.30 V (+0.45 V for other amino compounds) applied for 220 ms and a cathodic reactivation potential of -0.30 V applied for 100 ms (potentials versus SCE). The linear response range for ephedrine was within 1-100 mumol L-1 and the detection limit was 0.8 mumol L-1 with a 100 microL sample loop and a typical sampling ra 60 h-1. The signal (oxidation peak current) reproducibility was 2-3%. The method was applied to the determination of ephedrine in pharmaceutical formulations with results comparable to those obtained with a standard spectrophotometric method.     

Simultaneous voltammetric detection of dopamine and uric acid in the presence of high concentration of ascorbic acid using multi-walled carbon nanotubes with methylene blue composite film-modified electrode

An electrochemically functional nanocomposite through the adsorption of methylene blue onto the multi-walled nanotubes (MB-MWNTs) was prepared, and a sensitive voltammetric sensor was fabricated. The modified electrode showed excellent electrocatalytic activity toward dopamine (DA) and uric acid (UA) in 0.1 M phosphate solution medium (pH 3.0). Compared to the bare electrode, the MB-MWNTs film-modified electrode not only remarkably enhanced the anodic peak currents of DA and UA, i.e., shifted the anodic peak potential of DA negatively, but also avoided the overlapping of the anodic peaks of DA and UA. The interference of ascorbic acid (AA) was eliminated. Under the optimized conditions, the peak separation between AA and DA and between DA and UA was 219 and 174 mV, respectively. In the presence of 1.0 mM AA and 10.0 μM UA, the anodic peak current was linear to the concentration of DA in the range of 0.4–10.0 μM with a detection limit of 0.2 μM DA. The anodic peak current of UA was linear to the concentration in the range of 2.0–20.0 and 20.0–200.0 μM with a lowest detection limit of 1.0 μM in the presence of 1.0 mM AA and 1.0 μM DA.     

The electrochemical copolymerization of 3,4-dihydroxybenzoic acid and aniline at microdisk gold electrode and its amperometric determination for ascorbic acid

The electrochemical copolymerization of 3,4-dihydroxybenzoic acid (3,4-DHBA) and aniline was carried out at microdisk gold electrodes by means of cyclic voltammetric sweep. The polymer obtained on the electrode shows good electrochemical activity and high stability even though in neutral and weakly basic media. It was found that the response current of ascorbic acid was greatly enhanced at this composite polymer electrode. Moreover, the anodic overpotential was significantly reduced for about 200 mV (vs. SCE) compared with that obtained at bare gold electrodes. The electrode exhibits a rapid current response (less than 2 s) and a high sensitivity (0.21 AM(-1) cm(-2)). The dependence of response currents on the concentration of ascorbic acid was linear in the range of 1.0x10(-4)-1.0x10(-2) M. In addition this composite polymer modified electrode exhibits a high electrode stability for a long-term use.     

Electrocatalytic amperometric determination of amitrole using a cobalt-phthalocyanine-modified carbon paste electrode

Cobalt-phthalocyanine-modified carbon paste electrodes are shown to be excellent indicators for electrocatalytic amperometric measurements of triazolic herbicides such as amitrole, at low oxidation potentials (+0.40 V). The detection and determination of amitrole in flow injection analysis with a modified carbon paste electrode with Co-phthalocyanine is described. The concentrations of amitrole in 0.1 M NaOH solutions were determined using the electrocatalytic oxidation signal corresponding to the Co(II)/Co(III) redox process. A detection limit of 0.04 microg mL(-1) (4 ng amitrole) was obtained for a sample loop of 100 microL at a fixed potential of +0.55 V (vs. Ag/AgCl) in 0.1 M NaOH and a flow rate of 4.0 mL min(-1). Furthermore, the modified carbon paste electrodes offers reproducible responses in such a system, and the relative standard deviation was 3.3% using the same surface, 5.1% using different surface, and 6.9% using different pastes. The performance of the cobalt-phthalocyanine-modified carbon paste electrodes is illustrated here for the determination of amitrole in commercial formulations. The response of the electrodes is stable, with more than 80% of the initial retained activity after 50 min of continuous use.     

Voltammetric behaviour of ascorbic acid at a graphite—epoxy composite electrode chemically modified with cobalt phthalocyanine and its amperometric determination in multivitamin preparations

Cyclic voltammetry was used to investigate the electrochemical behaviour of ascorbic acid at a carbon—epoxy composite electrode modified with the electron mediator cobalt phthalocyanine. The modified electrode reduced the overpotential necessary for the oxidation of the vitamin by approximately 150 mV to 0.21 V vs. The saturated calomel electrode; the process was dependent on the pH of the supporting electrolyte, but independent of ionic strength over the range studied. The relative standard deviation (r.s.d.) of the peak heights of the cyclic voltammograms was 0.81% for a 1 × 10^?4 M ascorbic acid solution (n = 7). The optimum supporting electrolyte was found to be 0.05 M phosphate buffer (pH 5).Amperometry in stirred solutions was then done at an applied potential of +0.25 V. The limit of detection was 0.65 ng ml^?1 and the calibration graph was linear in the range 175 ng ml^?1?50 μg ml^?1. The method was used to determine ascorbic acid concentrations in single- and multivitamin preparations; the recovery was 97.86% for the vitamin added to one preparation. The r.s.d. for the analyses in these samples was about 5%. For comparison, the vitamin was also determined in these tablets using LC with UV detection at 254 nm; the correlation coefficient for the levels determined was 0.9989 (p = 0.0007).     

PDMS-based gold electrode for sensing ascorbic acid

Electrode with optical shapes is appreciated in microfluidics. In this article, we reported a flexible poly(dimethylsiloxane) (PDMS)-based gold electrode for ascorbic acid detection. Gold nanoparticles were chemically deposited on PDMS and the composite film was applied as working electrode. The electrode could undergo deformation and display good response performance without damage. This biosensor could give quick response to ascorbic acid (AA) (<5s) and the currents were linear with concentrations of AA in range of 0.023-7.00 mM and 30-100 mM, respectively. Limit of detection was 0.008 mM (S/N=3). This biosensor has been applied to determine ascorbic acid content in vitamin C tablets and the results were consistent with traditional iodometric method.     

Flow injection amperometric sensing of uric acid and ascorbic acid using the self-assembly of heterocyclic thiol on Au electrode

Au electrode modified with the self-assembled monolayer of a heterocyclic thiol, mercaptotriazole (MTz), is used for the electroanalysis of uric acid (UA) and ascorbic acid (AA). MTz forms a less compact self-assembly on Au electrode. The self-assembly of MTz on Au electrode favors the oxidation of UA and AA at less positive potential. Significant decrease (∼400 mV) in the overpotential and enhancement in the peak current for the oxidation of interfering AA with respect to the unmodified electrode is observed. The negative shift in the oxidation peak potential of AA favors electrochemical sensing of UA without any interference. Two well-separated voltammetric peaks for AA and UA are observed in their coexistence. The large separation between the two voltammetric peaks allows the simultaneous or selective sensing of the analytes without compromising the sensitivity. Linear response is obtained for a wide concentration range. This electrode could sense as low as 1 μM of UA in the presence of 10-fold excess of interfering AA. No change in the sensitivity (0.012 μA/μM) of the electrode toward UA in the presence and absence of AA is observed. Reproducible and stable amperometric flow injection response was obtained upon repetitive injection.     

Electrocatalytic H2O2 amperometric detection using gold nanotube electrode ensembles

Arrays of nanoscopic gold tubes were prepared by electroless plating of the metal within the pores of nanoporous polycarbonate track-etched membranes. A procedure for fabricating an ensemble of enzyme-modified nanoelectrodes has been developed based on the efficient immobilization of horseradish peroxidase (HRP) to the gold nanotubes array using self-assembled monolayers (mercaptoethylamine or mercaptopropionic acid) as anchoring layers. Hydrogen peroxide (H₂O₂) was determined electrochemically by using gold nanoelectrode ensembles (NEE) functionalized or not in phosphate buffer solution (PB) with or without a mediator (hydroquinone, H₂Q). Bare NEE displays a remarkable sensitivity (14 μA mM⁻¹ in H₂Q at −0.1 V versus Ag/AgCl) compared to a classical gold macroelectrode (0.41 μA mM⁻¹). The gold nanoparticles that form the tubular structure act as excellent catalytic surfaces towards the oxidation and the reduction of H₂O₂. The HRP modified NEE presents a slightly lower sensitivity (9.5 μA mM⁻¹) than bare NEE. However, this system presents an enhanced limit of detection (up to 4 × 10⁻⁶ M) and a higher selectivity towards the detection of H₂O₂ over a wide range of potentials. The lifetime, fabrication reproducibility and measurement repeatability of the HRP enzyme electrode were evaluated with satisfactory results.