Facile sonochemical synthesis and photoluminescent properties of lanthanide orthophosphate nanoparticles

Uniform lanthanide orthophosphate LnPO₄ (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho) nanoparticles have been systematically synthesized via a facile, fast, efficient ultrasonic irradiation of inorganic salt aqueous solution under ambient conditions without any surfactant or template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) spectra as well as kinetic decays were employed to characterize the samples. The SEM and the TEM images show that the hexagonal structured lanthanide orthophosphate LnPO₄ (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd) products have nanorod bundles morphology, while the tetragonal LnPO₄ (Ln=Tb, Dy, Ho) samples prepared under the same experimental conditions are composed of nanoparticles. HRTEM micrographs and SAED results prove that these nanostructures are polycrystalline in nature. The possible formation mechanism for LnPO₄ (Ln=La-Gd) nanorod bundles is proposed. Eu³⁺-doped LaPO₄ and Tb³⁺-doped CePO₄ samples were also prepared by using the same synthetic process, which exhibit an orange-red (Eu³⁺:⁵D₀-⁷F_{1, 2, 3, 4}) and green (Tb³⁺, ⁵D₄-⁷F_{3, 4, 5, 6}) emission, respectively.     

Geometric and electronic structure of clusters

The interplay between electronic and geometric structure is investigated for covalently bonded phosphorus clusters. We use a modification of the molecular dynamics/ density functional (MD/DF) method of Car and Parrinello, describing the electronic structure by a simplified linear combination of atomic orbitals (LCAO) approach. The results show clearly the tendency of phosphorus to threefold coordination, and substantial variations in bond angles lead to a large variety of isomers.     

Systematic synthesis and characterization of single-crystal lanthanide orthophosphate nanowires

A simple hydrothermal method has been developed for the systematic synthesis of lanthanide orthophosphate crystals with different crystalline phases and morphologies. It has been shown that pure LnPO(4) compounds change structure with decreasing Ln ionic radius: i.e., the orthophosphates from Ho to Lu as well as Y exist only in the tetragonal zircon (xenotime) structure, while the orthophosphates from La to Dy exist in the hexagonal structure under hydrothermal treatment. The obtained hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) products have a wirelike morphology. In contrast, tetragonal LnPO(4) (Ln = Ho, Er, Tm, Yb, Lu, Y) samples prepared under the same experimental conditions consist of nanoparticles. The obtained hexagonal LnPO(4) (Ln = La --> Tb) can convert to the monoclinic monazite structured products, and their morphologies remained the same after calcination at 900 degrees C in air (Hexagonal DyPO(4) is an exceptional case, it transformed to tetragonal DyPO(4) by calcination), while the tetragonal structure for (Ho--> Lu, Y)PO(4) remains unchanged by calcination. The resulting LnPO(4) (Ln = La --> Dy) products consist almost entirely of nanowires/nanorods with diameters of 5-120 nm and lengths ranging from several hundreds of nanometers to several micrometers. Europium doped LaPO(4) nanowires were also prepared, and their photoluminescent properties were reported. The optical absorption spectrum of CePO(4) nanowires was measured and showed some differences from that of bulk CePO(4) materials. The possible growth mechanism of lanthanide phosphate nanowires was explored in detail. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, electron diffraction, infrared absorption spectra, X-ray photoelectron spectroscopy, optical absorption spectra, and photoluminescence spectra have been employed to characterize these materials.     

Geometric and electronic structure of methane adsorbed on a Pt surface

The electronic structure of methane adsorbed on Pt(977) is investigated using angle-resolved x-ray absorption spectroscopy (XAS) in combination with density functional theory spectrum calculations. XAS, which probes the unoccupied states atom specifically, shows the appearance of the symmetry-forbidden gas-phase lowest unoccupied molecular orbital due to s-p rehybridization. In addition new adsorption-induced states appear just above the Fermi level. A systematic investigation, where computed XA spectra are compared with the experiment, indicates elongation of the C-H bond pointing toward the surface to 1.18+/-0.05 A. The bond elongation arises due to mixing between bonding and antibonding C-H orbitals. Computed charge density difference plots show that no covalent chemical bond is formed between the adsorbate and substrate upon adsorption. The changes in electronic structure arise in order to minimize the Pauli repulsion by polarizing charge away from the surface toward the carbon atom of the methane molecule.     

Geometric and electronic structure of vitamin C radicals. A semiempirical study

The structure and properties of ascorbic acid (AA) radicals are considered by using semiempirical MINDO/3 and MNDO methods. It is found that the most stable radical is the AA anion, in accordance with ESR measurements. This radical is thermodynamically more stable than the parent molecule. The origin of the enhanced stability of AA is elucidated by using a particular form of the energy-partitioning technique. The pronounced reactivity of AA , on the other hand, can be rationalized by the unpaired spin and the high orbital energy of the singly-occupied MO. These features are probably responsible for the radical-trap behavior of AA . The properties of AA , certainly make an appreciable contribution to the biochemical versatility of ascorbic acid. Finally, it should be mentioned that side chains of AA and AA are very flexible which increases their chelating abilities.     

Fabrication of silica-coated magnetic nanoparticles with highly photoluminescent lanthanide probes

Bi-functional nanoparticles (NPs) that consist of silica-coated magnetic cores and luminescent lanthanide (Ln) ions anchored on the silica surface via organic linker molecules are reported. Compared to individual Ln ions, the hybrid NPs show a drastically enhanced photoluminescence due to the efficient ligand-to-metal energy transfer in the Ln-loaded NPs: the new bi-functional NPs could be used in a variety of biological applications involving magnetic separation and optical detection.     

Novel microporous lanthanide silicates with tobermorite-like structure

The synthesis and structural characterization of microporous lanthanide silicates (Na(1.08)K(0.5)Ln(1.14)Si(3)O(8.5).1.78H(2)O, Ln = Eu, Tb, Sm, Ce) are reported. The structure of these solids is closely related with the structure of hydrated calcium silicate minerals known as tobermorites and was solved by powder X-ray diffraction ab initio (direct) methods and further characterized by chemical analysis, thermogravimetry, scanning electron microscopy, (23)Na and (29)Si MAS NMR and luminescence spectroscopy. These materials combine microporosity with interesting photoluminescence properties, and their structural flexibility allows fine-tuning of luminescence properties, by introducing a second type of lanthanide ion in the framework. Thus, they may find applications in new types of sensors.     

Magnetic properties of lanthanide chalcogenide semiconducting nanoparticles

To understand the importance of the band gap to the magnetic ordering in magnetic semiconductors, we have studied the effect of particle size on the ferromagnetic Curie temperature in semiconducting EuS. We have synthesized capped approximately 20 nm EuS nanoparticles using a single-source precursor, [Eu(S(2)CN(i)()Bu(2))(3)Phen] decomposed in trioctylphosphine. The nanoparticles have been characterized by X-ray powder diffraction, TEM, and magnetic susceptibility measurements as a function of temperature and field. The Curie temperature, based on Arrott plots, is depressed by 1-2 K from the bulk value.     

Study of electronic X-rays emitted from pionic and muonic atoms

The electronic X-ray energies of muonic atoms were precisely measured. The atomic number (Z) dependence of the energy difference between electronic X-rays of muonic atoms and Z-1 atoms (energy shift) was systematically investigated. The energy shifts in the low-Z region were compared with those of the high-Z region that had been obtained experimentally and theoretically in previous work. An obvious difference between these two regions was found in the atomic-number dependence of the energy shift. We also compared the energy shifts of muonic atoms with those of pionic atoms.     

The effect of hydrogen adsorption on the electronic structure of gold nanoparticles

It has been demonstrated that hydrogen adsorption has an effect on the electronic structure of gold nanoparticles. The physicochemical properties of separate gold nanoparticles have been studied under an ultrahigh vacuum scanning tunneling microscope. The structure and electronic structure of gold–hydrogen clusters were modeled by the quantum-chemical density functional theory method. Hydrogen adsorption onto gold nanoparticles 4–5 nm is size at room temperature was experimentally revealed, and the lower limit of 1.7 eV for the Au–H bond energy was determined. The interaction of hydrogen with gold leads to a considerable rearrangement of the electronic subsystem of nanoparticles. The experimentally observed effects were supported by quantum-chemical calculations. The rearrangement mechanism is related to strong correlations in the electronic subsystem.     

Geometric and electronic structure of ground and excited states of groupVA diatomics. A theoretical LCGTO-MP-LSD study

LCGTO-MP-LSD calculation was performed for the ground and several low-lying excited states of homo- (N₂, P₂, As₂, and Sb₂) and hetero-nuclear (PN, AsN, AsP, AsSb, SbN, and SbP) groupVA diatomics. For all the systems the ground state is found to be¹Σ⁺. For N₂ and P₂, the¹Σ _g ⁺ ground state is followed by the³Σ _u ⁺ ,³Π _g ,³Δ _u ,¹Π _g , and¹Δ _u low-lying exited states while for As₂ the order is found to be³Σ _u ⁺ ,³Δ _u ,³Π _g ,¹Δ _u ,¹Π _g . Finally for Sb₂ the relative stability of excited states is³Σ _u ⁺ ,³Δ _u ,¹Δ _u ,³Π _g ,¹Π _g . For the hetero-nuclear diatomics the¹Σ⁺ ground state is, in the case of PN, AsN, AsP, SbN, and SbP, followed by the³Σ⁺,³Δ,³Π,¹Π and¹Δ low-lying excited states while for the AsSb diatomic an inversion of stability of the two last singlets occurs. The calculated spectroscopic parameters (Re, ωe, andDe) are in good agreement with all the available experimental results while, theTe values are overestimated by about 0.5 eV. Mulliken population analysis shows that both homo- and hetero-nuclear groupVA diatomics are essentially triple bonded systems.     

Crystal structures, anisotropic growth, and optical properties: controlled synthesis of lanthanide orthophosphate one-dimensional nanomaterials

The fundamental understanding of the relationship between crystal structure and the dynamic processes of anisotropic growth on the nanoscale, and exploration of the key factors governing the evolution of physical properties in functional nanomaterials, have become two of the most urgent and challenging issues in the fabrication and exploitation of functional nanomaterials with designed properties and the development of nanoscale devices. Herein, we show how structural and kinetic factors govern the tendency for anisotropic growth of such materials under hydrothermal conditions, and how the crystal structure and morphology influence the optical properties of Ln3+-doped nanocrystals. The synthesis of phase-pure and single-crystalline monoclinic, hexagonal, and tetragonal one-dimensional LnPO4 nanostructures of different aspect ratios by means of kinetically controlled hydrothermal growth processes is demonstrated. It is shown that the tendency for anisotropic growth under hydrothermal conditions can be enhanced simply by modifying the chemical potentials of species in the reaction solution through the use of carefully selected chelating ligands. A systematic study of the photoluminescence of various Eu3+-doped lanthanide phosphates has revealed that the optical properties of these nanophosphors are strongly dependent on their crystal structures and morphologies.     

Synthesis and structure of lanthanide complexes with large-bite diphosphine dioxide ligands

Three large-bite diphosphine dioxide ligands were reacted with lanthanide salts to yield either molecular or polymeric complexes. The two flexible ligands gave bischelate complexes of general formulae [Ln(dppfO₂)₂Cl_x(NO₃)_2−x][FeCl₄] and [Ln(dppdO₂)₂(NO₃)₂]NO₃, where dppfO₂ and dppdO₂ are bis(diphenylphosphoryl)ferrocene and bis(diphenylphosphoryl)diphenyl ether, respectively. Reactions of the rigid bis(diphenylphosphoryl)benzene (dppbO₂) with lanthanide salts yielded linear coordination polymers of a 1:1.5 metal-to-ligand stoichiometry. The compounds were studied by single crystal X-ray diffraction, IR spectroscopy, mass spectrometry, and TG/DSC techniques.     

Highly luminescent bis-diketone lanthanide complexes with triple-stranded dinuclear structure

A new bis-β-diketone, 3,3'-bis(4,4,4-trifluoro-1,3-dioxobutyl)biphenyl (BTB), has been designed and prepared for the synthesis of a series of dinuclear lanthanide complexes [Ln(2)(BTB)(3)(C(2)H(5)OH)(2)(H(2)O)(2)] [Ln = Eu (1), Gd (2)], [Ln(2)(BTB)(3)(DME)(2)] [Ln = Nd (3), Yb (4); DME = ethylene glycol dimethyl ether] and [Eu(2)(BTB)(3)(L)(2)] [L = 2,2-bipydine (5); 1,10-phenanthroline (6); 4,7-diphenyl-1,10-phenanthroline (7)]. Complexes 1-7 have been characterized by various spectroscopic techniques and their photophysical properties are investigated. X-ray crystallographical analysis reveals that complexes 1, 3 and 4 adopt triple-stranded dinuclear structures which are formed by three bis-bidentate ligands with two lanthanide ions. The complexes 1 and 3-7 display strong visible red or NIR luminescence upon irradiation at ligand band around 372 nm, depending on the choice of the lanthanide. The solid-state photoluminescence quantum yields and the lifetimes of Eu(3+) complexes are determined and described.     

Molecular structure of diatomic lanthanide compounds

The molecular constants of selected diatomic lanthanide compounds (LaH, LaO, LaF, EuH, EuO, EuF, EuS, GdO, GdF, GdH, YbH, YbO, YbF, YbS, LuH, LuO and LuF) have been calculated by using relativistic small-core pseudopotentials and optimized (14s13p10d8f6g)/ [6s6p5d4f3g] valence basis sets. The results are in good agreement with available experimental data, with exception of YbO and LuF. The reasons for the discrepancies in case of YbO are due to a complicated mixing of configurations in the ground state, whereas in case of LuF the binding energy estimated by experimentalists appears to be too low.     

Solution structure of chiral lanthanide complexes

The determination of solution structure of small to medium size chiral lanthanide complexes through paramagnetic NMR and circular dichroism is briefly reviewed. The main focus is on ytterbium as the rare earth, because of its negligible contact contribution to the hyperfine shift and of its intense CD spectrum in the near IR. The structures discussed contain various stereogenic elements: classical chiral centres, atropisomeric axes, slowly interconverting conformations, which gives rise to a manifold of situations to be identified, classified, and characterised through spectroscopic tools. The fallout of these structural properties are in enantioselective catalysis, in molecular recognition, or even in biomedicine, on account of the role of Gd³⁺ complexes as MRI contrast agents. Moreover, the information encoded in the NMR and CD spectra of Ln³⁺ complexes may be used to extract original data on the solution stereochemistry of organic molecules used as ligands. The first part summarises some basic theoretical aspects, with special emphasis onto those which have practical consequences in the experimental design. A discussion of selected applications can be found in the second part.     

Electrooptical properties and structure of lanthanide 3-trifluoroacetylcamphorates

Kerr effect and optical activity data indicate that Pr³⁺, Dy³⁺,and Yb³⁺ 3-trifluoroacetylcamphorates in CCl₄ exist predominantly in one form with virtually octahedral orientation of the chelate rings.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 486–489, February, 1990.Deceased.     

胞嘧啶稀土配合物的振动光谱和结构研究

在无水体系中首次合成三种胞嘧啶稀土配合物Ln(Cyt)2(NO3)3(Ln=La, Ce, Gd)。振动光谱的实验频谱分析以及SAS值和量子化学计算结果, 表明该系列配合物以两个胞嘧啶分子在N(3)和C(2)=O(1)位同稀土配位, 两个硝酸根双齿配位, 形成八配位稀土配合物, 属C2h分子点群。