A Quasi-Optical System for Converting TE0n Mode Outputs of a Gyrotron into Gaussian Beams

In this paper we present a novel design of a quasi-optical system for conversion of gyrotron outputs into Gaussian-like beams. It consists of a quasi-optical antenna, two focusing mirrors and a filter which removes the side lobes of the beam. The system is appropriate as a transmission line for frequency tunable gyrotrons operating at TE_0n mode. As an illustration of our approach, we present results which demonstrate the applicability of the developed system for conversion of the radiation generated by the Gyrotron FU IVA. The examples include conversion of three TE_0n modes (TE₀₂, 223 GHz; TE₀₃, 323 GHz; TE₀₄, 423 GHz) into Gaussian- like beams.     

双微波源共轴辐射馈线结构的设计

设计了一种将两个不同波段微波源输出微波馈向同一个馈源喇叭的双波段馈线结构。该结构不仅对两个微波源输出的TM01模进行了有效的模式转换,而且实现了两个波段的微波共用辐射天线。采用双弯曲圆波导模式转换器实现高频段微波源输出微波的模式转换和轴线的定量平移;采用中间模式为矩形波导TE10模的圆波导TM01模-同轴波导TE11模的模式转换器,实现低频段微波源输出微波的模式转换及与高频段微波源输出微波的共轴输出。数值仿真结果验证了设计思路的正确性。     

Quasi-optical waveguide-mode converters using a pair of phase correction mirrors

This paper describes a quasi-optical method for the conversion of modes transmitted through highly oversized circular waveguides. A waveguide-mode is radiated once from a waveguide cut in the form of a radiation beam, which is then properly shaped by two curved mirrors and directed back into the waveguide. The curved mirror shapes are iteratively and automatically determined for given propagation distances using the design technique for phase correction mirrors. The proposed method gives favorable results in designing a waveguide expander/reducer, a TE₀₁-TE₀₂ mode converter, and a TE₀₁-HE₁₁ mode converter.     

An improved design for quasi-optical mode conversion of whispering gallery mode gyrotron radiation

Results are reported of a theoretical and experimental investigation of a quasi-optical mode converter for the transformation of whispering gallery mode gyrotron output into a linearly polarized Gaussian like beam. The mode converter consists of a helically cut waveguide launcher, similar to that originally proposed by Vlasovet al, followed by a focusing mirror. Theoretical results using aperture field methods indicate that the length of the waveguide launcher is of critical importance in providing a confined radiation pattern. Experimental results on the radiation pattern were obtained for several launcher lengths using a 0.6 MW, 149 GHz pulsed gyrotron operating in the TE_16,2 mode. Radiation pattern results for the optimum launcher length agree well with theoretical calculations using the Stratton-Chu aperture radiation theory for unperturbed waveguide modes. A mirror focusing in the azimuthal direction was designed by a geometrical optics approach to focus the radiation coming from the launcher. Good focusing with 91.4% efficiency (power in the focused beam divided by gyrotron power) was found experimentally using the combined launcher and mirror with the pulsed gyrotron. These results indicate that quasi-optical antennas are useful for transforming high order, high frequency gyrotron modes into directed beams in free space.     

非均匀扰动结构TE0n模式变换器研究

本文提出一种半径和周期双重扰动的非均匀圆波导TE_0n模式变换器. 通过耦合波理论(CWT)和数值优化方法对该模式变换器进行研究, 计算结果与电磁仿真软件基本一致. 与传统的均匀结构半径微扰模式变换器比较, 非均匀扰动结构TE_0n模式变换器可以在更少的波纹周期内实现高于均匀结构的模式转换效率, 95%功率转换绝对带宽增加150%, 器件长度减小接近一半. 本文的研究工作为设计轴向尺寸短、工作带宽大、 转换效率高的高功率回旋管外接模式变换器提供了重要参考.     

HEM11模磁绝缘线振荡器的高频分析

作为小型化和紧凑型的高功率微波源,磁绝缘线振荡器(MILO)在过去十几年里得到了广泛的研究和发展.在大多数研究中,最低的对称模一直被当作器件的主模.然而,由于结构的对称性或者电子发射均匀度不理想等原因,很容易激励起非对称模式.计算了MILO同轴结构中同时包含对称模和非对称模的本征方程.在此基础上,通过对结构的优化设计,提出了一种HEM₁₁模工作的MILO,并开展了原理性实验.在二极管的电压为480kV,电流为39kA条件下得到了功率为1.2GW,脉冲宽度为40ns的微波输出,功率转换 关键词： 磁绝缘线振荡器 高频特性 11模')" href="#">HEM₁₁模 开放腔     

宽带非均匀半径渐变TE0n-TE0(n+1)模式转换器的设计研究

基于耦合波理论,对两类半径渐变圆波导TE_0n-TE_0(n+1)模式转换器进行理论分析、数值计算和仿真模拟.均匀半径渐变波导高功率模式转换器,采用中心频率为17.14GHz、六周期TE₀₂-TE₀₃模式和中心频率为34.30GHz、六周期TE₀₁-TE₀₂模式两种设计参数.非均匀半径渐变波导高功率模式转换器,采用中心频率为34.30GHz、六周期TE 关键词： 模式转换器 耦合波理论 非均匀半径渐变 转换带宽     

Hybrid Transmission Line for ECRH in the Helically Symmetric Experiment

The HSX oversized, mode-converting ECRH transmission line has been upgraded to a hybrid system to increase launched microwave power and reduce electrical arcing. Filtering of high-order, spurious modes ensures efficient coupling to a Gaussian beam for optimal electron heating. A Vlasov mode converter and two phase-correcting ellipsoidal mirrors convert the TE₀₂ gyrotron output mode to a symmetric, linearly polarized, microwave beam. A swappable twist reflector plate rotates beam polarization for 2nd-harmonic X-mode or fundamental O-mode ECRH. Long distances are traversed by coupling the beam to a dual-mode (TE₁₁ + TM₁₁), smooth, circular cross-section waveguide. This system has been successfully tested without arcing for 50 ms pulses and over 100 kW of launched power. Analysis of the microwave beam for 50 kW, 2 ms microwave pulses reveals agreement with predicted beam shapes at two beam locations. The new system has also demonstrated increased plasma stored energy for ECRH plasmas with equal launched power.     

X波段过模弯曲圆波导TM01-HE11模式变换器研究

在波束波导和反射面天线的馈源应用中, 为了产生低副瓣且方向图等化的高斯波束, 需要将高功率微波转换为准高斯模HE₁₁模辐射. 本文利用弯曲圆波导可同时从TM₀₁模产生TE₁₁模和TM₁₁模的原理, 提出了采用双弯曲过模圆波导结构直接将TM₀₁转换为HE₁₁的模式变换器, 避免了常规微波领域中首先将TM₀₁转换为TE₁₁再用波纹式或半径渐变式TE₁₁-HE₁₁转换器转换为准高斯波束功率容量不足或尺寸过长的不足. 基于模式耦合理论和Taguchi优化算法对模式变换器的弯曲半径、相移直端长度及引入位置进行了优化, 使输出的TE₁₁和TM₁₁成一定比率, 以组成HE₁₁模式, 并对设计的模式变换器进行了全电磁波仿真分析, 结果表明输出波束的标量高斯含量在9.05–9.8 GHz范围内均高于99%, 理论功率容量可达4.5 GW. 关键词： 高功率微波 模式耦合理论 Taguchi优化算法 模式变换器     

X波段高功率微波TE11模圆极化器

 基于圆波导TE₁₁模的模式简并特性和微波在椭圆波导中传输两个正交TE11模式相速不同的性质,研制了一种带有椭圆波导结构的圆波导TE₁₁模圆极化器。该圆极化器通过圆波导到椭圆波导的过渡段,将输入的线极化TE₁₁模式分成两个等幅、正交的TE₁₁模,然后调整椭圆波导长度,使得两个正交的TE₁₁模式的相位差为90°,实现了TE₁₁模式微波线极化到圆极化的转换。利用时域有限差分软件优化设计了该圆极化器,并按照优化的结构尺寸加工了一套实验装置进行了实验测试,测试结果表明：在工作频率9～10 GHz范围内,该圆极化器轴比小于1 dB,驻波比小于1.1,且功率容量大于1.6 GW。     

Micro-optical 3-dB mode converters

We present a detailed design of a 3-dB TE₀-TE₁ micro-optical mode converter using a chirped grating to phase-match the two propagation modes in an optical waveguide. Devices were fabricated in titanium in-diffused lithium niobate by ion-beam etching the tapered grating pattern into the waveguide surface. The power transfer between the two coupled modes was observed experimentally by varying the angle between the light beam and the normal grating wave-vector. Insertion loss of the TE₀-TE₁ mode converter due to spurious scattering was estimated at 1.5 dB.     

对称单负介质包层平面波导的模式特征

系统研究了负μ材料(MNG)作为包层的对称三层平板波导的传输特性. 研究发现,这种波导既支持快波的传播,又支持TE₀,TE₁模式的慢波传输. 其模式特性不同于左手介质波导和传统介质波导,导模存在的模折射率范围要比它们的大. MNG波导的TE₀快波模缺失,且TE_m模(m>1)的传播常数大于TM_m模的传播常数. TE_m模具有双模特征,且与波导的结构参数密切相关,导致波导中的净能流出现负值. 关键词： 单负介质 平板波导 快波与慢波 传播常数     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.     

Operation of a 32 GHz gyrotron

The design and operation of a 32 GHz pulsed gyrotron are reported. The device is step-tuned between the TE_1,2 (24.16 GHz) and TE_0,2 (31.78 GHz) modes with cathode voltages ranging from 30 to 40kV and beam current up to 5.0A. Experimental frequencies are in close agreement with the self-consistent calculated values and in the TE_2,2 resonator mode an output peak power of 6kW corresponding to an 18% efficiency was measured by using a fast response calorimeter with a thermal sensitivity of 0.1°C/Wmin.     

Continuous-Wave Operation of a Frequency-Tunable 460-GHz Second-Harmonic Gyrotron for Enhanced Nuclear Magnetic Resonance

The design, operation, and characterization of a continuous-wave (CW) tunable second-harmonic 460-GHz gyrotron are reported. The gyrotron is intended to be used as a submillimeter-wave source for 700-MHz nuclear magnetic resonance experiments with sensitivity enhanced by dynamic nuclear polarization. The gyrotron operates in the whispering-gallery mode TE(11,2) and has generated 16 W of output power with a 13-kV 100-mA electron beam. The start oscillation current measured over a range of magnetic field values is in good agreement with theoretical start currents obtained from linear theory for successive high-order axial modes TE(11,2,q). The minimum start current is 27 mA. Power and frequency tuning measurements as a function of the electron cyclotron frequency have also been carried out. A smooth frequency tuning range of 1 GHz was obtained for the operating second-harmonic mode either by magnetic field tuning or beam voltage tuning. Long-term CW operation was evaluated during an uninterrupted period of 48 h, where the gyrotron output power and frequency were kept stable to within ±0.7% and ±6 ppm, respectively, by a computerized control system. Proper operation of an internal quasi-optical mode converter implemented to transform the operating whispering-gallery mode to a Gaussian-like beam was also verified. Based on the images of the gyrotron output beam taken with a pyroelectric camera, the Gaussian-like mode content of the output beam was computed to be 92% with an ellipticity of 12%.     

Guided modes in slab waveguides with a left handed material cover or substrate

We study guided modes propagating along a dielectric slab waveguide with a left handed material (LHM) cover or substrate. The dispersion relation is derived by using normalized waveguide parameters. An analytical method is then proposed to calculate the universal dispersion curves. Different from a slab waveguide with a LHM core, we find that guidance properties are strongly dependent on dielectric permittivity ε and magnetic permeability μ of the substrate and cover layers. For oscillating guided modes, fundamental zero order mode is not always absence, sometimes it exists in a restricted range of normalized propagation constant. First order mode behaves as other higher order modes and exists up to infinite high frequency. Higher order modes have no double degeneracy in the case of LHM cover layer. For surface guided modes, the existence and the type of the mode solutions with respect to different parameters are classified systematically and discussed in detail. Unlike a slab waveguide with a LHM core where the dispersion curve of TE₁ surface mode continues with that of oscillating TE₁ mode, the dispersion curve of TE₁ surface mode continues with that of oscillating TE₀ mode. It seems that the two different kinds of modes compensate each other to form one whole mode. Both TE and TM guided modes are discussed.     

Design of a Quasi-Optical System to Convert TE0n Mode Outputs of a Gyrotron into Gaussian Beams

In this paper we present a novel design of a quasi-optical system for conversion of gyrotron outputs into gaussian beams. It consists of a quasi-optical antenna, four focusing mirrors (parabolic cylinders) and a filter which removes the side lobes of the beam. The system is capable to convert three TE_0n mode outputs into gaussian beams with waist size of 16.7 mm as well as four TE_1n mode outputs into bi-gaussian beams with waist size of 10.9 mm in width and 16.5 mm in length.     

Whispering-Gallery-Mode Gyrotron Operation with a Quasi-Optical Antenna

High-frequency gyrotron operation in the TE611 whispering gallery mode is reported. Powers as high as 112 kW and an efficiency as high as 25.4 percent have been obtained. In addition to the TE611 mode, ten other fundamental modes with frequencies between 133.9 and 216.4 GHz were observed. A quasi-optical antenna for whispering gallery modes has been tested for the TE611 mode. The combination of this antenna and a reflector produces a well-collimated linearly polarized RF beam suitable for electron cyclotron resonance heating (ECRH) or plasma diagnostics. The experimental conversion efficiency was determined to be 89 percent, and the cross polarization was down by 25 dB. A new quasi-optical transmission line employing this antenna has also been tested with the gyrotron. The absence of mode competition for the TE611 mode, as well as the efficient conversion of the output radiation into a linearly polarized Gaussian-like beam, substantiates the arguments for operation in surface modes in high-power gyrotrons. The implications of quasi-optical antennas for megawatt gyrotron window design are discussed.     

Radiation from a Circular Waveguide Flush-mounted to a Ground Plane covered by a Plasma or a Dielectric Slab

A theory of the radiation from the open end of a circular waveguide fed in the dominant TE₁₁ mode and flush-mounted to an infinite, perfectly conducting flat ground plane covered by a plasma or a dielectric sheath is developed. In this analysis, the contributions to the aperture admittance and the excited fields from the higher order TE_1n (n ≥ 1) and TM_1l(l ≥ 1) modes are included. The aperture admittance for which the higher order modes are considered, has been calculated by two methods: 1. variational technique and 2. successive iteration method. It is shown that for any desired order of accuracy the results of these approaches are identical. Expressions for radiated fields, surface waves for all radial values of r, and the fields which represent glancing incident fields inside the slab are derived. The contribution of the surface waves to the aperture admittance is also presented.     

非截面二维光子晶体排列矩形波导的全模式分析

在对周期性结构进行谐波分析的基础上，导出了非截面二维光子晶体排列矩形波导的本征值方程. 基于此方程，可以对该类光子晶体波导的所有可能模式进行分析. 分析认为，非截面二维光子晶体排列矩形波导内能存在的模式包括E_(y)，TE_y，H_(y)和TM_y模式；改变波导高度，可以实现E_(y)模式和H_(y)模式与其他模式通带的完全分离. 然而改变任一结构参数，都不能使E_(y)和H_(y)的各个模式通带，以及E_(y)1模式和H_(y)1模式的通带完全隔离. 波导单模工作的带宽由E_(y)1和E_(y)2模式的低端截止频率决定. 关键词： 波导 光子晶体 本征值方程 模式