置于液面上的刚塑性圆板大挠度动力响应分析

分析了置于无旋不可压理想流体流面上的简支刚塑性圆板受矩形脉冲载荷作用的大挠度动力响应，借助Ｈａｎｋｅｌ变换，将液－固耦合作用为在空气中的圆板塑性动力响应问题，进而求解弯矩和膜力联合作用的大挠度运动方程，得到了中载及高载下各相运动的完全解，并提供了数值算例。     

ANALYSIS OF THE LARGE DEFLECTION DYNAMIC RESPONSE OF RIGID-PLASTIC CIRCULAR PLATE RESTING ON FLUID

A study is presented for the large deflection dynamic response of rigid-plastic circular plate resting on potential fluid under a rectangular pressure pulse load.By virtue of Hankel integral transform technique,this interaction problem is reduced toa problem of dynamic plastic response of the plate in vacuum.The closed-formsolutions are derived for both middle and high pressure loads by solving the equationsof motion with the large deflection in the range where both bending moments andmembrane forces are important.Some numerical results are given.     

Large deflection problem of thin orthotropic circular plate with variable thickness under uniform pressure

Basic equations for large deflection theory of thin orthotropic circular plate with variable thickness are derived in this paper. The modified iteration method is adopted to solve the large deflection problem of thin orthotropic circular plate with variable thickness under uniform pressure. If ε=0, then the solution derived from the result in this paper coincides completely with the result given by J. Nowinski (using perturbation method) for solving large deflection problem of thin orthotropic circular plate with constant thickness under uniform pressure.     

The perturbation parameter in the problem of large deflection of clamped circular plates

In the problems of large deflection of clamped circular plates under uniformly distributed loads, various perturbation parameters relating to load, deflection, slope of deflection, membrane force, etc, are studied. For a general perturbation parameter, the variational principle is used for the solution of such a problem. The applicable range of these perturbation parameters are studied in detail. In the case of uniformly loaded plate, perturbation parameter relating to central deflection seems to be the best among all others. The method of determination of perturbation solution by means of variational principle can be used to treat a variety of problems, including the large deflection problems under combine loads. This paper is completed under the guidance of Prof. Chien Wei-zang.     

均变载荷下固定边圆薄板大挠度问题

关于均佈或中心集中载荷下圆薄板的大撓度平衡問題,已經有好几位学者用不同方法处理过。但用攝动法來处理时,不但計算比较簡單,并且得到的結果合乎实用。文蓀的攝动法选擇載荷为参数,解答的适用范圍小;钱偉長教授的攝动法选擇中心撓度为参数,得到的解答适用范圍大,并且和实驗的結果相符合。錢偉長教授的攝动法要比文蓀的攝动法來得高明。近几年來,錢偉长教授,胡海昌同志,叶开沅同志都采用撓皮为参数的攝动法解决了各种圓板的大撓度平衡問題。     

Unsymmetrical nonlinear bending problem of circular thin plate with variable thickness

Introduction Manystructuralelements(pole,plate,shell)withunevenandvariablethicknessarewidely usedinallkindsofengineeringfields.Engineerscansavematerialswhentheydesignbecause theseelementshavebetteroptimizedshapeofstructuralfeature,butthisaddsdifficultytotheanalysisoftheirmechanicalcapability.Manypreviouspapers[1-4]havesolvedtheproblemof symmetricalaxis,butnobodyhassolvedtheunsymmetricalnonlineardeformationproblemof circularthinplatewithvariablethicknessandunsymmetricalaxisuptonow,afewworkonly …     

Optimal design of axisymmetric plastic shallow shells of von Mises material

An optimal design technique developed earlier for axisymmetric plates and circular cylindrical shells is accommodated for shallow spherical shells subjected to uniform transverse pressure. Material of the shells is assumed to be rigid-plastic obeying the von Mises yield condition and the associated deformation law. The post-yield behaviour of the shells is taken into account. The weight minimization is performed under the condition that the maximal deflection of the shell of variable thickness coincides with the deflection of the reference shell of constant thickness. The problem is transformed into a non-linear boundary value problem which is solved numerically.     

Series solution for elastic behavior of corrugated circular plates in large deflection under arbitrary loads

Chebyshev polynomials are used to solve the problem of large deflection for corrugated circular plates with a plane central region under arbitrary loads based on the nonlinear bending theory of anisotropic circular plates. Numerical results are compared with those available in the literature. The present method shows higher accuracies and larger application ranges.     

直角坐标下横观各向同性饱和半空间体动力响应问题的解析解

基于双重Fourier变换技术，成功求解了直角坐标系下，横观各向同性弹性饱和多孔介质的三维Biot动力方程，得到了以固体骨架位移分量和孔隙流体压力为基本未知量的积分形式一般解．进而，用一般解给出了饱和介质的总应力分量表达式。在此基础上，研究了在任意分布的表面竖向和水平谐振力作用下，横观各向同性饱和半空间体的动力响应问题。数值结果表明，采用各向同性饱和介质的动力学模型，不能准确描述具有明显各向异性特性的饱和土地基的动力性能。     

On 3-dimensional non-axisymmetrical deformation analyses for finite hollow circular cylinders

In this paper, 3-dimensional non-axisymmetrical deformation analyses for finite hollow circular cylinders have been carried out by Pickett's double series expansion method^[1]. Through expanding the displacement potentials as the sum of fourier series and Fourier-Bessel series, we could express the coefficients of one series by those of another under certain boundary conditions. Thus, a set of linear algebraic equations were derived. Solving these equations, we could obtain the solutions of the problems. Numerical examples have been given to show that the method presented here is workable for practical applications.     

Dynamic interaction between elastic thick circular plate and transversely isotropic saturated soil ground

IntroductionThe vibration of the plate on the porous saturated building foundation is a complicateddynamic contact problem.Its consideration is very important in both earthquake and geo-technical engineering.Lots of research works have been done in recent…     

A DISCUSSION ON“THE LARGE DEFLECTION PROBLEM OF CIRCULAR THIN PLATE WITH VARIABLE THICKNESS UNDER UNIFORMLY DISTRIBUTED LOADS”

"The large deflection problem of circular thin plate with variable thickness under uniformly distributed loads" has been solved by using the small parameter method and modified iteration method jointly in the ref.[1].The solution of the ref. [1] and its special results are procedure in the ref.     

粘弹性大挠度圆板的轴对称弯曲

本文探讨粘弹性大挠度圆板的轴对称弯曲的基本方程和求解方法.用半逆解和摄动法分析挠度与膜力,对标准线性固体进行数例计算,并与小挠度理论相比较.全部方程与解答可退化得相应的弹性大挠度板的结果.     

3-D DYNAMIC RESPONSE OF TRANSVERSELY ISOTROPIC SATURATED SOILS

Introduction Thedynamicanalysisofsaturatedporoelasticmediaisofbroadmeaninginmanyaspectssuchasseismology,earthquakeengineering,soilmechanicsandgeophysics,etc.Thetransverselyisotropicsaturatedsoilsissolid fluidcoupledtwophasemediainwhichthe soilskeletondisp…     

ON THE METHOD OF ORTHOGONALITY CONDITIONS FOR SOLVING THE PROBLEM OF LARGE DEFLECTION OF CIRCULAR PLATE

In this paper,we reexamine the method of successive approximation presented byProf.Chien Wei-zang for solving the problem of large deflection of a circular plate,and findthat the method could be regarded as the method of strained parameters in the singularperturbation theory.In terms of the parameter representing the ratio of the centerdeflection to the thickness of the plate,we make the asymptotic expansions of thedeflection,membrane stress and the parameter of load as in Ref.[1],and then give theorthogonality conditions(i.e.the solvability conditions)for the resulting equations,bywhich the stiffness characteristics of the plate could be determined.It is pointed out thatwith the solutions for the small deflection problem of the circular plate and theorthogonality conditions,we can derive the third order approximate relations between theparameter of load and the center deflection and the first-term approximation of membranestresses at the center and edge of the plate without solving the differential equ     

集中载荷作用下弹性地基圆薄板大挠度问题的精确解

本文处理了winkler型弹性地基上圆板受集中载荷作用的大挠度问题,第一次获得了这类问题的精确解的解析式,并用此精确解进行了具体求解,其结果可供工程直接使用,这较之已有文献中的近似处理方法具有更好的可靠性,同时也为研究大挠度理论提供了可靠的依据。     

Perturbation solution for impulsively loaded viscoplastic plates

A perturbation technique was used to determine large deflection response of viscoplastic clamped circular plates to uniform impulsive loading. Using a simple membrane model of the plate and assuming a strain rate dependence of the matched viscous type a non-linear eigenvalue problem for the determination of mode shape was formulated and solved by means of a modified Rayleigh-Schrödinger method. An explicit formula was derived for the maximum central deflection of the plate. The prediction of the present solution was compared with experimental results concerning impulsively loaded mild steel and titanium plates, recently reported in the literature. A remarkably good agreement was obtained for all test configurations considered.     

波纹环形板在轴对称任意载荷作用下的非线性弯曲

本文以正交异性板理论为基础,提出了一种波纹环形板非线性弯曲的Cheby-shev级数解法,推导出具有硬中心的波纹环形板在任意轴对称载荷作用下的弹性特征方程.文中计算了几个典型的算例,数值结果表明本文的方法对目前文献中常见的方法有一定的改进和推广.     

Non-axisymmetrical vibration of elastic circular plate on layered transversely isotropic saturated ground

The non-axisymmetrical vibration of elastic circular plate resting on a layered transversely isotropic saturated ground was studied.First,the 3-d dynamic equations in cylindrical coordinate for transversely isotropic saturated soils were transformed into a group of governing differential equations with 1-order by the technique of Fourier ex- panding with respect to azimuth,and the state equation is established by Hankel integral transform method,furthermore the transfer matrixes within layered media are derived based on the solutions of the state equation.Secondly,by the transfer matrixes,the general solutions of dynamic response for layered transversely isotropic saturated ground excited by an arbitrary harmonic force were established under the boundary conditions, drainage conditions on the surface of.ground as well as the contact conditions.Thirdly, the problem was led to a pair of dual integral equations describing the mixed boundary- value problem which can be reduced to the Fredholm integral equations of the second kind solved by numerical procedure easily.At the end of this paper,a numerical result concerning vertical and radical displacements both the surface of saturated ground and plate is evaluated.     

用能量法研究双模量大挠度圆板的轴对称弯曲

双模量圆板在外载荷作用下发生轴对称弯曲变形时,会形成各向同性的拉伸区和压缩区.此种情况下,可把双模量圆板看成两种各向同性材料组成的层合板,采用弹性理论建立了双模量圆板在外载荷作用下的静力平衡方程,利用静力平衡方程确定了双模量圆板的中性面位置.在此基础上,采用能量法研究了双模量大挠度圆板轴对称弯曲变形问题,将该方法计算结...