用布拦格光纤光栅制作啁啾光纤光栅

介绍了一种用布拉格光纤光栅制作啁啾光纤光栅的方法。采用氢酸腐蚀布拉格光纤光栅,使光栅的横截面沿光栅轴向逐渐变小,然后对光栅施加１．５０Ｎ的拉力,在光栅轴向建立应变梯度,制作出长１５ｍｍ、峰值反射率达９２％、反射半高宽为５ｎｍ的啁啾光纤光栅。     

线性啁啾光纤光栅色散补偿性能的数值分析

对线性啁啾光纤光栅的色散补偿性能进行了数值分析。结果表明 ,啁啾光栅时延曲线的纹波大小和线性度是影响其色散补偿性能的两个重要因素。对高斯型耦合系数分布光栅而言 ,更长的光栅将具有更佳的色散补偿性能     

基于非线性啁啾光纤光栅实现的色散可调谐

从原理上证明了一种基于非线性啁啾光纤光栅以及光纤光栅的温度特性的色散可调谐方案.实验证明在25.5℃的温度变化范围内,光纤光栅对1550.43nm波长的色散补偿量从759.1ps/nm上升到1659.9ps/nm,色散调谐范围达到900ps/nm,这个方案具有对补偿波长和特定补偿波长所需要的色散补偿量同时进行调谐的特点.     

基于悬臂梁的光纤光栅无啁啾线性调谐

设计了一种均质,等厚,等腰三角状悬臂梁,调节该梁自由端的挠度,实现了光纤光栅布拉格反射中心波长的线性无啁啾调谐（调谐范围４．５０ｎｍ）引入修正因子η＝０．７１后,理论值与实验结果基本一致,光栅与梁间刚性粘贴的质量影响反射谱形状。     

13 cm长线性啁啾光纤光栅的研制

运用程控微位移扫描曝光技术结合相位掩模法,成功地研制了长为13cm,带宽为0．8nm,反射率为90％的宽带线性啁啾光纤光栅,经测试其色散值为－1700ps/nm。实验研究结果表明,对于10Gb/s的传输系统,所研制的光栅能很好地补偿100km普通单模光纤的色散。     

基于步进啁啾光纤光栅的编解码器的OCDMA系统性能分析

对基于步进啁啾光纤光栅编解码器的OCDMA系统性能进行了分析,通过数值模拟得到系统性能与系统参数满足的关系,为改善系统性能提供可靠的依据.本文是对基于步进啁啾光纤光栅的OCDMA频阈相位编码一文的深化.     

线性啁啾莫尔光纤光栅的理论研究

以经典耦合模理论为基础,结合线性啁啾莫尔光纤光栅的结构特性,给出了线性啁啾莫尔光纤光栅的耦合系数和耦合模方程,并用龙格库塔迭代法数值求解耦合模方程.对多种线性啁啾莫尔光纤光栅的光谱特性和时延特性进行了理论模拟.分析结果表明,线性啁啾莫尔光纤光栅的相移特性和切趾特性,使得该类型光栅在波分复用全光网中有着很好的应用前景.     

长周期啁啾光纤光栅级联作为波分复用隔离滤波器的数值研究

用矩阵传输法对长周期啁啾光纤光栅用于波分复用隔离滤波器的特性进行了分析,讨论了设计该类型高性能的波分复用隔离滤波器的关键技术,给出了仿真结果,表明该类型滤波器具有大的可用带宽、频率等间隔、隔离度高和通带内的色散可以忽略等优点,并指出通过调谐级联长周期光纤光栅之间的光纤长度可以实现频率间隔的调谐.     

简支梁调谐啁啾光纤光栅的实验研究

利用有机玻璃块和螺旋测微器组成的简支梁系统调谐线性啁啾光纤光栅,将中心波长为1548.6nm、3dB带宽为0.43nm、长为25mm的均匀Bragg光纤光栅按一定角度牢牢的固定在一块长为90mm,宽为10mm,高为5.2mm的有机玻璃块中,再用螺旋测微仪在有机玻璃的中心位置向下施加压力,使简支梁及其中的光纤光栅变形,成为可调谐的啁啾光纤光栅。实验结果表明啁啾光纤光栅反射谱宽与简支梁弯曲量成线性关系,当简支梁最大弯曲量为1.2mm时光纤光栅反射谱展宽了4.02nm,而反射中心波长基本不变,该实验装置可以用于光控相控阵雷达天线的实时延迟线和光纤色散补偿。     

利用均匀相位掩模板制作线性啁啾光纤光栅

理论上分析并从实验上验证了一种利用均匀相位掩模板写入啁啾光纤光栅的方法:将光纤弯曲,由于光纤离掩模板的距离不同从而使光纤光栅的周期轴向渐变,由此产生啁啾。分析了这种啁啾光纤光栅的谱特性和时延特性,同时也分析了由于光纤离掩模板的距离不同而引起的折射率调制变化给光纤光栅特性带来的影响。设计了一种石英曲面,利用其使光纤按照弯曲函数进行弯曲,然后进行紫外曝光制成了线性的啁啾光纤光栅。实验中制作的啁啾光纤光栅色散值为-1102 ps/nm,纹波为17ps。通过改变弯曲函数就可以实现利用一块均匀相位掩模板制作不同啁啾量的啁啾光纤光栅的目的,降低了啁啾光纤光栅的制作成本。     

A multi-parameter optical fiber sensor with interrogation and discrimination capabilities

A multi-parameter and multi-function, but low-cost, optical fiber grating sensor with self-interrogation and self-discrimination capabilities is presented theoretically and experimentally. The sensor bases on three fiber Bragg gratings (FBG) and one fiber long period grating (LPG). Strain, vibration, pressure, ordinary temperature (−10 to 100 °C) and high temperature (100–800 °C) can be measured by the sensor. When high temperature (100–800 °C) is measured, the LPG is used as a high temperture sensor head and FBG₁ is used as an interrogation element. Alternatively, when one of the other four measurands is measured, FBG₁ (or FBG₂) is used as a sensor head and LPG is used as an interrogation element. When two of the other four measurands are measured simultaneously, FBG₁ and FBG₂ are used as sensor heads and LPG is used as a shared interrogation element. FBG₃ is used as a reference element to eliminate the errors resulted from light source fluctuation and the cross-sensitivity between measurand and environmental temperature. The measurands can be interrogated according to the signals of the photodiodes (PDs), which are related to the relative wavelength shift of the LPG and the FBGs. Experimental results agree well with theoretical analyses. The interrogation scheme is immune to light source fluctuation and the cross-sensitivity between measurands and enviromental temperature, and also the dynamic range is large.     

一种新型温度自适应光纤光栅动态传感系统

 研究了采用温度控制光纤Bragg光栅（FBG）作为信号解调器件的自适应光纤光栅动态传感系统。系统利用半导体制冷器件对滤波用FBG进行温度控制,以改变FBG的窄带滤波波长,使之在合适的滤波波长工作,以适应测量环境温度变化,实现对传感器环境温度变化的自适应。通过采用参考信道,去除系统噪音,提高测量精度。系统动态应变传感精度达到9.745×10^-10(Hz^-1/2。     

带温度补偿的分布式光纤温度传感系统设计

针对分布式光纤温度传感系统(Distributed Optical Fiber Temperature Sensing System,DTS)在线测温精度不高的问题,提出了使用光纤布拉格光栅(Fiber Bragg Grating,FBG)解调仪对DTS进行温度补偿。对不带温度补偿的DTS进行了温度测量和数据分析,证明了进行温度补偿的必要性。设计了带温度补偿的DTS并进行了温度测试。实验结果表明,在使用FBG解调仪对DTS进行温度补偿后,DTS的温度精确度可以达到0.3℃。     

Application of multimode fiber optical sensor in optical tomography technology

In this paper, an attempt to use a multimode optical fiber sensor in tomography is made. Two types of lens, one sphere and one cylinderical, are designed for two terminals of the fiber. It solves the problem of insufficient power collection of natural light beam using current fiber with polished terminals. A theoretical analysis of the relationships among the sphere lens radius, the cylinderical lens radius, the refractive index of the fiber is carried out. The relationship between the scanning angles and the number of the optical fibers is experimentally investigated in the air medium.     

Arbitrary chirped fiber Bragg gratings on application of filtering for optical communications

This paper presents an analysis of how to obtain narrow transmission band in the centre of the spectrum of the arbitrary chirped fiber Bragg grating (ACFBG). Grating chirp coefficient and refractive index profile are the critical parameters in contributing to performance of fiber Bragg grating. The reflection spectra and transmission band were analyzed with different refractive index profile. Apodization techniques are used to get optimized reflection spectra. The simulations are based on solving coupled mode equations by transfer matrix method that describes the interaction of guided modes.     

啁啾光纤光栅对光纤CATV系统中二阶非线性失真的改善

在理论上，我们利用光波的时域场包络方程分析了光纤CATV系统中的二阶非线性失真问题和获得理论的表达式，且分析的结果和数值模拟的结果很好的吻合。在实验上，利用啁啾光纤光栅的调谐特性来改变系统的色散补偿量进行了125公里的光纤CATV的系统实验，很好的证实了以上的理论推导。理论和实验的结果都证实适当的选择啁啾光纤光栅的色散补偿量可以很好的改善系统二阶非线性失真的性能。     

具有温度自校准功能的光纤折射率传感器

提出一种具有温度自校准功能的光纤折射率（RI）传感器,传感头结构由2段很短的多模光纤（MMF）之间夹熔一段对折射率不敏感的光纤布拉格光栅（FBG）构成,传感头总长度为14 mm,FBG可以为折射率测量提供良好的温度校准功能。实验结果证明,该传感器的折射率灵敏度为126 nm。其干涉光谱共振波长的温度灵敏度为35.09 pm/℃,用于温度校准的FBG的温度灵敏度为11.14 pm/℃。相比于普通的折射率传感器,这种具有温度自校准功能的折射率传感器具有良好的实用前景。     

Highly sensitive distributed liquid-droplet sensor based on evanescent-wave linearly chirped fiber Bragg grating

We propose a highly-sensitive distributed addressable liquid-droplet sensor based on an evanescent-wave linearly chirped fiber Bragg grating (LCFBG). Due to liquid-droplet-induced increase of the localized effective refractive index, a transmission window is generated within the original reflection stopband of LCFBG. Utilizing the spatial encoding feature of Bragg wavelength in LCFBG and spectrum properties of the created passband, both numerical and experimental results demonstrate that the position, size, and refractive index information of multiple distributed discrete liquid-droplets can be detected simultaneously.     

A multi-parameter sensor system using concentric core optical fiber

We, for the first time, report an experimental demonstration of multi-parameter fiber sensor system using the concentric core optical fiber, which can simultaneously determine the stress, the position of stress and the cracks. A high bending-sensitive concentric core optical fiber has been used in a mesh type structure to form the multi-function sensor.     

Cross-phase modulation in long-haul systems with chirped fiber Bragg gratings-based dispersion compensators

The cross-phase modulation (XPM) effect in fiber links with dispersion compensated by chirped fiber Bragg gratings (CFBGs) is analyzed here for the first time. A continuous-wave (CW) signal, referred to as a probe, is used to investigate the impact of XPM on communication systems. The result shows that the XPM in systems using CFBGs as dispersion compensators is greatly suppressed, compared with that of systems using dispersion compensated fiber (DCF). The difference of the dispersion management between the system using DCF and that using CFBGs is demonstrated, too.