Design of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber

We propose a new structure of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber （PCF）. Through optimizing the diameters of the first two inner rings of air-holes and the GeO2 doping concentration of the core, the nonlinear coefficient is up to 47 W^-1.km^-1 at the wavelength of 1.55 um and nearly-zero flattened dispersion of ±0.5 ps/（nm·km） is achieved in the telecommunication window （1460 - 1625 nm）. Due to the use of GeO2-doped core, this innovative structure can offer not only a large nonlinear coefficient and broadband nearly-zero flattened dispersion but also low leakage losses.     

新型高双折射及色散平坦光子晶体光纤研究

用平面波展开法对光子晶体光纤中电磁场的Maxwell方程组进行了求解。将光纤截面作为超元胞衍生出一个无边界的二维周期性系统，光纤纤芯等效为光子晶体中的缺陷，借助平面波法对其性质进行研究，模拟了半导体中的超格子。运用上述超格子模型，对与纤芯同列孔半径可变的高双折射及与包层中纤芯距离最近的孔半径可变的色散平坦光子晶体光纤的光学性质进行了研究，发现与纤芯同列的孔半径变化时，其双折射比传统光纤更强，而当包层中距离纤芯最近的孔半径取特定值时，可得到近零色散平坦光纤并在大范围内获得反常色散。与传统光纤和普通光子晶体光纤相比，这种新型的色散平坦光纤在密集波分复用（DWDM）光通信系统中具有更高的应用价值。     

中红外色散平坦硫系光子晶体光纤设计及性能研究

本文以自制Ge20Sb15Se65硫系玻璃为基质材料,设计一种正八边形结构色散平坦型中红外硫系光子晶体光纤,并采用多极法对其中红外色散和传输特性进行数值研究.结果表明:控制该光纤占空比(d/Λ)在0.323—0.367之间,其色散及传输特性在3—5μm范围内可调.当孔间距Λ=3.4μm,孔直径d=1.1μm时,光纤在4.1—4.9μm波段的色散值在0.8—0.8 ps·nm 1·km 1波动,且具备单模低损耗传输(Loss0.049dB/m),小模场面积(Aeff8.46μm2)特性,适合于中红外非线性应用领域.     

New nonlinear and dispersion flattened photonic crystal fiber with low confinement loss

A new nonlinear dispersion flattened photonic crystal fiber with low confinement loss is proposed. This fiber has threefold symmetry core. The doped region in the core and the big air-holes in the 1st ring can make high nonlinearity in the PCF. And the small air-holes in the 1st ring and the radial increasing diameters air-holes rings in cladding can be used to achieve the dispersion properties of the PCF. We can achieve the optimized optical properties by carefully selecting the PCFs structure parameters. A PCF with flattened dispersion is obtained. The dispersion is less than 0.8 ps/(nm km) and is larger than −0.7 ps/(nm km) from 1.515 μm to 1.622 μm. The nonlinear coefficient is about 12.6456 W⁻¹ km⁻¹, the fundamental mode area is about 10.2579 μm². The confinement loss is 0.30641 dB/km. This work may be useful for effective design and fabrication of dispersion flattened photonic crystal fibers with high nonlinearities.     

新型THz波超平坦色散光子晶体光纤

设计出一种新型的渐变空气孔径THz波超平坦色散光子晶体光纤.应用时域有限差分方法(finite-difference time-domain,FDTD)计算光纤色散,所得结果表明渐变空气孔径光子晶体光纤比孔直径不变光子晶体光纤控制色散的能力更强;且当第三层与第四层空气孔直径相同时,孔直径渐变的光子晶体光纤的色散更趋于平坦,而当空气孔直径取d₁=0.85d₄, d₂=0.95d₄,d₃=d₄(d₁,d₂,d₃,d₄分别为包层从内到外空气孔的直径)时,此种光子晶体光纤可以在波长60—65 μm(4.61—5 THz)范围内将波导色散值控制在-0.1±0.3 ps/(km·nm)范围内,得到趋于超平坦色散的、具有很好的束缚THz波的能力和良好的损耗特性的新型THz波光子晶体光纤. 关键词： THz波光子晶体光纤 时域有限差分方法 超平坦色散     

Design of double cladding dispersion flattened photonic crystal fiber with deformation insensitive outer cladding air-holes

A design of double cladding dispersion flattened photonic crystal fiber (DF-PCF) is proposed. To employ traditional stack and draw technology, the cladding of the DF-PCF is consisted of triangular periodic air-holes with the same hole to hole pitch. Simulation results show that the small air-holes in the inner cladding are mainly for dispersion management. The large air-holes in the outer cladding are mainly used for light confinement and have little impact on the dispersion tailoring. Thus, the dispersion profile of the double cladding DF-PCFs is insensitive to the deformation of air-holes in the outer cladding. Considering that the larger air-holes are apt to deform in the drawing procedure, the characteristics mentioned above make the realization of DF-PCFs relative easy by employing conventional stack and draw technology and modest air-hole rings (less than 10 rings) in the cladding.     

Multiple defect-core hexagonal photonic crystal fiber with flattened dispersion and polarization maintaining properties

In this paper, we present a dispersion controlling technique with a multiple defect-core hexagonal photonic crystal fiber (MD-HPCF). By omitting air holes in the core region of the conventional HPCF and adjusting the size of air holes around the newly formed core, we can successfully design low flattened dispersion PCF with low confinement loss, as well as high birefringence. The low flattened dispersion feature, as well as the low confinement losses and high birefringence are the main advantages of the proposed PCF structure, making it suitable as chromatic dispersion controller, dispersion compensator, and/or polarization maintaining fiber.     

Design and analysis of a wideband photonic crystal waveguide with low group-velocity and low dispersion

The slow light propagation in a line waveguide in the two-dimensional triangular photonic crystal has been numerically studied, based on which a wideband photonic crystal waveguide with low group-velocity and low dispersion is proposed. The numerical simulation analysis shows that it is possible to maximize the group index and minimize the group-velocity dispersion in wide bandwidth by increasing the radius of the basic air hole and changing the position of the first two rows of air holes in photonic crysta...     

Modified design of photonic crystal fibers with flattened dispersion

We present a modified method to design photonic crystal fibers with flattened dispersion characteristics. By replacing the circular air-holes of the first central ring with elliptic air-holes, we observe a more flattened dispersion curve. Plane-wave expansion (PWE) method is used to analyze the dispersion property in a high-index core PCF. The simulation results are presented, and ultra-low and ultra-flattened dispersion curves over wide wavelength range are demonstrated.     

Design and numerical analysis of a gold-coated photonic crystal fiber based refractive index sensor

Optical and Quantum Electronics - Optical sensors are very attractive in chemical and bio-chemical applications due to some unique characteristics, such as immunity to electromagnetic interference...     

Design of hybrid-core PCF with nearly-zero flattened dispersion and high nonlinearity

We present a new structure of nearly-zero flattened dispersion and highly nonlinear photonic crystal fiber(PCF) in the telecommunication window. This fiber design is comprised of a hybrid-core region with bismuth-doped region in the center and three lower bismuth-doped regions in the first ring that enables dispersion control while maintaining a high nonlinear coefficient. Numerical analysis results show that the proposed PCF is achieved with a nonlinear coefficient of about 3301 W-1 km-1, a dispersion value of about 0.5537 ps/(nm?km) at 1550 nm, and nearly-zero flattened dispersion fluctuating within 2.5 ps/(nm?km) ranging from 1.496 to 1.596 μm.     

宽带色散补偿光子晶体光纤的设计与优化

提出了一种新型的宽带色散补偿光子晶体光纤。通过增大光子晶体光纤(PCF)包层第一环空气孔半径r1,同时优化孔间距和包层其它环空气孔,在1550nm波长处获得了低至-1906.4ps/nm/km的负色散值。针对常规单模光纤的色散特性,设计出了宽带色散补偿光子晶体光纤,可补偿23倍长度的常规光纤,补偿的带宽达330nm,这在WDM系统中对多个信道同时进行色散补偿具有非常重要的意义。     

A polymer photonic crystal fiber with high and flattened birefringence

A novel high birefringence polymer photonic crystal fiber (PCF) is proposed in this work. This PCF is composed of a polymer core and a cladding with elliptical air holes and squeezed triangular lattice. The high birefringence is introduced on the combined effect of elliptical air holes and the squeezed lattice. Our numerical results based on the supercell lattice method indicate that the birefringence can reach as high as 0.0018 at 650 nm wavelength with a properly designed cladding structure. We also analyze the dependence of the birefringence on structure parameters. And we design a PCF that has high and flattened birefringence.     

Design of hybrid photonic crystal fiber: Polarization and dispersion properties

A highly birefringent dispersion compensating hybrid photonic crystal fiber is presented. This fiber successfully compensates the chromatic dispersion of standard single mode fiber over E- to L-communication bands. Simulation results reveal that it is possible to obtain a large negative dispersion coefficient of about −1054.4 ps/(nm km) and a relative dispersion slope of 0.0036 nm⁻¹ at the 1550 nm wavelength. The proposed fiber simultaneously provides a high birefringence of order 3.45 × 10⁻² at the 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest. For practical conditions, the sensitivity of the fibers dispersion properties to a ±2% variation around the optimum values is carefully studied and the nonlinearity of the proposed fiber is also reported and discussed. Such fibers are essential for high speed transmission system as a dispersion compensator, sensing applications, fiber loop mirrors as well as maintaining single polarization, and many nonlinear applications such as four-wave mixing, etc.     

一种新型的基于四孔单元光子晶体光纤的设计与分析

设计了一种基于四孔单元的光子晶体光纤,它可以满足光通信系统中高双折射率、负色散和低限制损耗的要求,比起通常的三角结构光纤有着更高的双折射率,并且结构制作也较简单。采用全矢量有限元法和各项异性完美匹配层法对所设计的光纤进行了仿真研究。仿真结果表明:该光纤在1.55μm波长处可获得10~(-2)数量级的双折射率,在较宽广的波段范围具有大的负色散,限制损耗低于10~(-9)dB/m;该光纤在保偏光纤、单极化单模光纤、色散补偿光纤等方面具有重要的应用。     

Design of single polarization single mode dispersion compensating photonic crystal fiber

In this paper, we present a photonic crystal fiber based on hexagonal structure for improved negative dispersion as well as high birefringence in the telecom wavelength bands. It is demonstrated that it is possible to obtain negative dispersion coefficient of −712 ps/(nm km) and relative dispersion slope (RDS) perfectly match to that of single mode fiber (SMF) of about 0.0036 nm⁻¹ at the operating wavelength 1550 nm. The proposed fiber exhibits high birefringence of the order 2.11 × 10⁻² with nonlinear coefficient about 57.57 W⁻¹ km⁻¹ at 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest.     

2.5THz环烯烃聚合物中空芯光子晶体光纤设计与实验

采用全矢量有限元法,仿真设计了一种工作在2.5THz频段的中空芯太赫兹光子晶体光纤,用环烯烃聚合物材料(COC)制备了光纤样品,利用CO2激光泵浦气体太赫兹源搭建了测试平台并对光纤的太赫兹波传输性能进行了测试。实测光纤最低损耗0.17dB/cm、平均损耗约0.5dB/cm,在弯曲90°情况下光纤传输损耗波动小于5%,具有良好的可弯曲性;光纤输出端口的模场分布测试结果表明,光纤是以主模进行传输,太赫兹能量很好地被束缚在光纤芯中。     

2.5 THz环烯烃聚合物中空芯光子晶体光纤设计与实验

采用全矢量有限元法,仿真设计了一种工作在2.5 THz频段的中空芯太赫兹光子晶体光纤,用环烯烃聚合物材料（COC）制备了光纤样品,利用CO2激光泵浦气体太赫兹源搭建了测试平台并对光纤的太赫兹波传输性能进行了测试。实测光纤最低损耗0.17 dB/cm、平均损耗约0.5 dB/cm,在弯曲90情况下光纤传输损耗波动小于5%,具有良好的可弯曲性;光纤输出端口的模场分布测试结果表明,光纤是以主模进行传输,太赫兹能量很好地被束缚在光纤芯中。     

非截面二维光子晶体排列矩形波导的全模式分析

在对周期性结构进行谐波分析的基础上，导出了非截面二维光子晶体排列矩形波导的本征值方程. 基于此方程，可以对该类光子晶体波导的所有可能模式进行分析. 分析认为，非截面二维光子晶体排列矩形波导内能存在的模式包括E_(y)，TE_y，H_(y)和TM_y模式；改变波导高度，可以实现E_(y)模式和H_(y)模式与其他模式通带的完全分离. 然而改变任一结构参数，都不能使E_(y)和H_(y)的各个模式通带，以及E_(y)1模式和H_(y)1模式的通带完全隔离. 波导单模工作的带宽由E_(y)1和E_(y)2模式的低端截止频率决定. 关键词： 波导 光子晶体 本征值方程 模式     

Design and analysis of a photonic crystal fiber with four-hole unit

A novel photonic crystal fiber (PCF) based on a four-hole unit is proposed in order to meet the requirements of high birefringence, negative dispersion and confinement loss in fiber-optic communication. The proposed design has been simulated based on the full vector finite element method (FVFEM) and anisotropic perfectly matched layers (APML). Analysis results show that the proposed PCF can achieve a high birefringence to the order of 10⁻² at the wavelength of 1.55 μm, a large negative dispersion over a wide wavelength range and confinement losses lower than 10⁻⁹ dB/m simultaneously, which has important applications in polarization-maintaining (PM) fibers, single-polarization single-mode (SPSM) fibers, dispersion compensation fibers and so on.