氧化镁两步法制备阻燃型氢氧化镁

以氯化镁焙烧生成的氧化镁为原料,采用两步法即先水化后水热的方法制备出六方片状氢氧化镁。考察了水化时间、水热时间和温度及水热添加剂氢氧化钠浓度对氢氧化镁材料形貌的影响。研究表明,水化时间超过3h,氧化镁水化率基本不变,水热温度越高对晶体形貌改善越大,水热时间的延长可促进晶体粒径及厚度的增加,但是对晶体的宽厚比改变不大。水热添加剂氢氧化钠浓度的增加可明显地提高晶体结晶度,减小晶体微观内应变,提高粉体分散性。     

氧化镁两步法制备阻燃型氢氧化镁

以氯化镁焙烧生成的氧化镁为原料,采用两步法即先水化后水热的方法制备出六方片状氢氧化镁。考察了水化时间、水热时间和温度及水热添加剂氢氧化钠浓度对氢氧化镁材料形貌的影响。研究表明,水化时间超过3 h,氧化镁水化率基本不变,水热温度越高对晶体形貌改善越大,水热时间的延长可促进晶体粒径及厚度的增加,但是对晶体的宽厚比改变不大。水热添加剂氢氧化钠浓度的增加可明显地提高晶体结晶度,减小晶体微观内应变,提高粉体分散性。     

棒状氢氧化镁的合成

以氯化镁和氢氧化钠为原料合成了棒状氢氧化镁粉体。考察了氢氧化钠浓度、陈化温度、陈化时间对氢氧化镁形貌的影响。采用SEM、HRTEM、XRD、TG等对所得氢氧化镁颗粒的形貌、颗粒大小、晶习及热稳定性进行了表征。结果表明,当陈化温度为90℃时,所得棒状氢氧化镁随氢氧化钠浓度的升高及陈化时间的增加,晶形更加完整;当陈化温度在120℃时,所得氢氧化镁颗粒的形貌为片状,不能得到棒状氢氧化镁。     

纳米氢氧化镁的合成及其形貌控制

用乙醇和水的混合溶剂热法合成氢氧化镁纳米材料,并用透射电镜(TEM)和X射线衍射(XRD)表征其形貌和结构,同时考察了镁源、温度、反应时间、反应物浓度和溶剂热体系对氢氧化镁纳米材料形貌的影响,探索其生长机理。镁源通过改变氢氧化镁纳米粒子的结晶习性从而影响形貌,温度和反应时间受热力学和动力学的控制使氢氧化镁纳米材料的生长从六个等价面的取向生长向各向同性生长转变,从而导致形貌由六边形片状结构向圆形变化,反应物浓度和溶剂热体系影响成核快慢,从而影响氢氧化镁纳米材料的晶型。     

甲基丙烯酸甲酯悬浮聚合实验教学的改进

选用氢氧化镁为分散剂,甲基丙烯酸甲酯(MMA)为单体,进行悬浮聚合反应,研究了分散剂用量、引发剂用量、水和单体比、搅拌速度、反应温度及反应时间对聚合物珠粒大小、均匀程度和产率的影响。结果表明:与目前高分子实验教材普遍选用的以聚乙烯醇(PVA)为分散剂的悬浮聚合反应相比,以氢氧化镁为分散剂,具有操作简单、聚合时间短、体系稳定性高等优点,可代替原有的悬浮聚合反应实验,作为高分子化学实验的教学课程内容。     

气液接触法制备球形氢氧化镁(英文)

利用气液接触法成功合成出了形状规则的球形氢氧化镁,并用X射线衍射仪(XRD)、热重(TG-DTG)、扫描电镜(SEM)和激光粒度仪表征了所得产品的结构、形貌、及粒度分布等性质。结果显示:所得球形氢氧化镁颗粒分散性较好,样品的表观粒径D50=7.41μm,热分解温度始于363.6℃。最后根据气液接触反应的原理及氨气易挥发和被吸收的性质,对球形氢氧化镁的形成机理进行了讨论。     

气液接触法制备球形氢氧化镁

利用气液接触法成功合成出了形状规则的球形氢氧化镁,并用X射线衍射仪(XRD)、热重(TG-DTG)、扫描电镜(SEM)和激光粒度仪表征了所得产品的结构、形貌、及粒度分布等性质。结果显示：所得球形氢氧化镁颗粒分散性较好,样品的表观粒径D₅₀=7.41μm,热分解温度始于363.6℃。最后根据气液接触反应的原理及氨气易挥发和被吸收的性质,对球形氢氧化镁的形成机理进行了讨论。     

双注-水热法制备高分散氢氧化镁纳米片

本工作以氯化镁、氢氧化钠为原料，氯化钠为衬底溶液，探讨了采用双注-水热法制备高分散氢氧化镁纳米片的可行性。结果表明：采用双注方式或提高衬底溶液氯化钠浓度均有利于降低反应体系过饱和度，改善常温产物的结晶性和分散性；对常温合成的氢氧化镁进行水热处理可进一步提高产物的结晶度，形成形貌规则、粒径分布窄、分散良好的氢氧化镁纳米片。     

花状及中空圆片状氢氧化镁晶体的可控合成与表征

在一缩二乙二醇溶液中,以PVP作为可控性因素,选择性地合成出了花状或中空圆片状氢氧化镁晶体.并用X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、选区电子衍射(SAED)、高分辨率透射电镜(HRTEM)和热重差热分析(TG/DTA)等测试手段进行了表征.利用"药毒"机理对两种不同形貌结构的合成进行了分析.TG/DTA曲线显示两种晶体热性质的不同可能与它们不同的形貌与尺寸有关,该结果与文献报道一致.     

丙三醇-变频微波-水热法制备氢氧化镁晶须

以MgCl₂·6H₂O和NaOH为原料, 采用丙三醇-变频微波-水热法制备了优质氢氧化镁晶须. 采用XRD, SEM和TEM进行了物相、粒度、晶体形貌和结构分析. 考察了丙三醇-变频微波-水热法工艺对氢氧化镁晶须晶形、结构及分散性的影响. 实验发现, 在水热反应体系中加入体积分数为15%的丙三醇, 用变频微波加热, 在180 ℃反应6 h, 可获得粒度分布均匀、晶形和分散性好、表面光滑及缺陷少的优质氢氧化镁晶须. 在透射电镜下估算晶须直径约为0.1～0.3 μm, 长度约为80～110 um. 初步分析了变频微波和丙三醇对氢氧化镁晶须生长的作用.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.