Thermal degradation of the polymer obtained by oxidation of C60 fullerene by oleum

Degradation of (C₆₀) _n polymer and the C₁₂₀ and C₁₂₀O dimers at different temperatures was studied by IR and ESR spectroscopy. The formation of C₆₀ was revealed. The polymer stability was found to be higher than the stability of the dimers. Peculiar features of the IR spectra of three-dimensional hyper-crosslinked polymers obtained by liquid-phase polymerization of C₆₀ are discussed.     

Helical complexes of oligonucleotides with derivatives of oligoamides. Specificity of complementary recognition

The method of molecular mechanics with an AMBER 3.0 computer software package, supplemented by specially developed subprograms, was used to carry out a conformational analysis of hybrid double helices with noncanonical H-bonds composed of oligodeoxyribonucleotide and oligoamide fragments (dT)₅ · (pT)₅ (1) and (dA)₄(dT)₂(dA)₄ · (dT)₃(pT)₄(dT)₃ (2). The purpose of the work was to perform a pre-synthesis estimation of Watson—Crick specificity of binding specially constructed oligomers, which carry oligoamide inserts of 2-aminoethylglycine units in the center, connected to nitrogen bases through a methylenecarbonyl group. A comparison of helical parameters and potential energies in optimized structures of hybrid oligonucleotides with noncanonical T · T-pairs with the energies of analogs containing only canonical A · T-pairs showed that disruption of Watson—Crick complementarity results in a crucial distortion of hybrid double helices, which leads to their destabilization. For this reason, the expected probability of mispairing of oligonucleotides is low for the proposed analogs of oligonucleotides carrying oligoamide inserts. Hence, the synthesis of these oligonucleotides is promising for creating reagents with selective action on single-stranded oligonucleotides inside cells.Papers presented in the section Chemistry of Natural Compounds and Bioorganic Chemistry of this issue are based on the materials delivered at the XII Seminar on Intermolecular Interactions and Conformation of Molecules, Khar'kov, October 3–8, 1994.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1364–1368, July, 1995.     

Liquid Crystalline Orientation of Semiconducting Nanorods in a Semiconducting Matrix

This paper describes the synthesis of narrowly distributed block copolymers consisting of a hole conducting triarylamine block and an anchor block via RAFT polymerization. The anchor block is thereby introduced via a reactive ester approach. Block copolymers with dopamine anchor groups bind to oxidic semiconductors like TiO₂, SnO₂, and ZnO. Thus, it becomes possible to cover inorganic electron conducting (acceptor) nanomaterials with a corona of an organic hole conducting (donor) polymer like poly(triphenylamine), giving new hybrid materials. The poly(triphenylamine) grafted to inorganic nanorods allows the preparation of stable nanorod dispersions in appropriate solvents. At higher concentration the nanorods form liquid crystalline phases in various solvents and in a low T_g oligotriphenylamine matrix. This offers the potential to orient semiconducting inorganic nanorods in a hole conducting polymer matrix by self‐assembly.

     

A new inorganic-organic polymer for the passivation of thin film capacitors

Inorganic-organic polymers with barrier properties against water vapor, excellent electrical data (3, 2, R _D>10¹⁶ cm, E _D up to 400 V/µm) and good adhesion to various substrate materials have been developed. Tailored modifications of these materials provide an excellent protective coating for thin film capacitors. Several mm thick, expensive, encapsulations could be replaced by thin coatings (up to 10 µm). The polymer coating allows the use of thin film chip capacitors in surface-mount technology. As a measure for the efficiency of the coating, the capacitance decrease under controlled humidity has been used. The influence of the material composition, the type of catalyst during sol-gel processing and the curing conditions have been studied. Adhesion and water vapor permeation properties of the polymers and rheological properties of the coating solutions have been investigated. A protective coating is developed, which increases the withstandness of capacitors against humid conditions (90°C, 100% rel. humidity) by a factor of about 30 (compared to uncoated capacitors) and shows no crack formation during thermal cycling.     

Anodic electrochemical polymerization of complexes [Ni(Salpn-1,3)] and [Cu(Salpn-1,3)]

New experimental data characterizing the conditions of electrochemical synthesis of stable electrically conducting electrochromic polymeric film systems based on the complexes [Ni(Salpn-1,3)] and [Cu(Salpn-1,3)] [Salpn-1,3 is N,N-propylenebis(salicylidenimine)] in a 0.1 M Bu₄NClO₄/CH₂Cl₂ solution are presented. The redox conductivity of the new polymers is characterized by the charge diffusion coefficient. The electrochemical stability of the polymeric films is analyzed in relation to the potential and time of accumulation, and also to the range of potential sweeping.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 12, 2004, pp. 1985–1989.Original Russian Text Copyright © 2004 by Ardasheva, Vovk, Pchelova, Shagisultanova.     

Frozen state transitions in relation to freeze drying

Freeze-drying is used as a gentle dehydration method for heat sensitive materials especially in food and pharmaceutical industries. Most materials, including dissolved sugars in water, do not crystallise during freezing prior to freeze-drying. Supersaturated, freeze-concentrated solutions are amorphous materials and they solidify into a glassy state when their temperature is depressed to below the glass transition temperature,T _g. Differential scanning calorimetry has been used to show that maximally freeze-concentrated sugar solutions, when properly frozen, show during heating a glass transition,T _g , which is followed by ice melting endotherm with onset atT _m . Low molecular weight materials are difficult to freeze-dry as they have lowT _g , andT _m slightly above T _g . High molecular weight materials, such as carbohydrate polymers, exhibit improved dehydration characteristics and they have _g and _m at about the same temperature close to the melting point of pure water. The amorphous, glassy structure typical of freeze-dried materials is formed during prefreezing and retained after removal of ice and the unfrozen water from the freeze-concentrated material. Dehydration temperatures belowT _g allow removal of ice within the solid, glassy solutes, but temperatures aboveT _m result in collapse. The frozen state transitions and properties of freeze-dried materials can be shown in state diagrams which are used to derive proper freeze-drying conditions and storage requirements for various materials.     

Preparation of Silica-Based Inorganic-Organic Hybrid Membrane via the Sol-Gel Route

Silica-based inorganic-organic hybrid membranes have been prepared on porous -Al₂O₃ substrate (pore size, 2 m) using tetraethoxysilane (TEOS) and phenyltrimethoxysilane (PTMOS) as precursors. The effects of sol synthesis conditions on the processing and performance of deposited hybrid layers were observed. The thickness of the hybrid layers after three deposition cycles is about 2 m, estimated from their cross-section SEM micrographs. The gas permselectivity of the hybrid membrane was characterized by O₂/N₂, CO₂/N₂, and CO₂/O₂ mixing gases, which was mainly governed by the surface diffusion at lower pressures and Knudson diffusion at higher pressures. The introduction of phenyl groups can not only improve the selectivity of O₂/N₂ and CO₂/N₂, but also densify the membrane network.     

Dynamic viscosity of polymer solutions

The dynamic viscosity of different long chain polymers in Aroclor permits an easy extrapolation to zero concentration only in the limiting cases of Newtonian, i. e., constant viscosity at low and high frequency, respectively. The first intrinsic viscosity []₀ is independent of any concept of the internal viscosity. In the case of polystyrene it is proportional toM ^0,65 which shows that Aroclor is a good solvent for this polymer. The second intrinsic viscosity [] turns out to be independent ofM. It is best reproduced by the model where the internal viscosity resists only the deformation rate of the single link. The displacement rate of more distant beads is affected by the internal viscosity only in the case that it involves the deformation rate of the links. The angles between successive links may be changed at any rate.In the intermediate range of frequencies the extrapolation of the observed dynamic viscosity to the intrinsic value was never made. The experimental data are so much affected by the concentration, i. e., by the interaction of adjacent molecules, that no conclusion may be derived from them about the properties of the isolated macromolecule. A master curve independent ofM andc is obtained by plotting of (G- )K/c over ₁. This means that the deformation mode in the whole molecular weight and concentration range investigated is the same. But this mode is different from that of the independent macromolecule in infinite dilution. The master curve may be described by the excess intrinsic viscosity of the Rouse model with the internal viscosity acting either between the beads on the same link only or between any distinct beads. As a consequence of the concentration effects, however, no conclusions about the properties of the single molecule can be derived from such an agreement.Dedicated to Prof. Dr. F. H. Müller.     

In situ Growth of Pd Nanoparticles in Crosslinked Polymer Matrices

Polymer nanocomposites continue to receive considerable attention as multifunctional hybrid materials, with most nanocomposites fabricated by physical dispersion of surface‐functionalized nanoscale objects. In this study, we explore the viability of growing Pd‐containing nanoparticles from Na₂PdCl₄ in two different polymers: hypercrosslinked polystyrene (HPS) and an aromatic polyimide (PIm). In HPS, single Pd‐containing nanoparticles possessing a relatively narrow size distribution (ca. 1–4 nm) form upon reduction of the divalent PdCl ions. Single nanoparticles with a broad size distribution ranging from ≈2 to 16 nm develop in PIm, which simultaneously undergoes chemical crosslinking during ion reduction. Such hybrid materials hold promise in molecular catalysis and gas separation.

     

An Inorganic-Organic Hybrid Composite Featuring Metal-Chalcogenide Clusters

The cluster complex, Re₆( ₃-Se)₈(PEt₃)₅(4-vinylpyridine)(SbF₆)₂ (1), featuring the face-capped octahedral Re₆( ₃-Se)₈²⁺ cluster core and site-differentiating triethylphosphine and 4-vinylpyridine ligands has been synthesized and structurally characterized. The complex crystallized in monoclinic space group P2₁ with a=11.748(1)Å, b=15.1212(2)Å, c=19.941(2)Å, =90°, =94.411(3)°, =90°, V=3531.8(7)ų, Z=2, R1=0.0531, wR2=0.0774. Copolymerization of styrene with 1 via the polymerizable 4-vinylpyridine ligand afforded a novel inorganic-organic hybrid composite of high molecular weight and a low polydispersity index. Structural integrity of the cluster building block is maintained upon hybrid formation.     

ORMOCER®s for Optical Interconnection Technology

New inorganic-organic hybrid polymers (ORMOCER®s) for integrated optical and opto-electronic devices were synthesized by sol-gel processing of functionalized alkoxysilanes. Process parameters (catalyst, temperature etc.) were optimized to achieve highly reproducible low cost materials which are photopatternable even in higher layer thickness (presently 100 m within one step).The resulting materials have low optical losses at the most important wavelengths for telecommunications in the NIR range (0.3 dB/cm at 1320 nm, 0.6 dB/cm at 1550 nm) and a variety of additional advantageous properties for optical interconnection technology and production of opto-electronic devices: good wetting and adhesion on various substrates (e.g. glass, silicon and several polymers), low processing temperatures (post-bake at 150°C) and high thermal stability (decomposition at 270°C) compared to alternative opto-polymers for NIR applications. A further advantage is a tunable refractive index, which can be achieved by mixing different resins.     

New Molybdenum(V) Complexes Prepared by the Oxidation of Dinuclear Quadruply-Bonded Molybdenum(II) Monothiocarboxylates

Oxidation of molybdenum(II) thiopivalate and thiobenzoate in the presence of -picoline or pyridine results in the formation of dinuclear molybdenum(V) complexes of the general formulae [Mo₂O₂(-O)₂(-SO₄)L₄] with L = -picoline or pyridine and [Mo₂O₂(-O)(-S)(-SO₄)L₄] with L = -picoline. As determined by X-ray structure analysis, two complexes with -picoline differ in their bridging cores: In one complex, two Mo atoms are doubly bridged through two oxygen atoms; in the other, one Mo atom is doubly bridged through oxygen and sulfur atoms. However, they both crystallize together. The product is solvated with -picoline and water molecules. Molybdenum atoms exhibit distorted octahedral coordinations. The same complexes were prepared also through direct reactions of [Mo₂O₃(O₂CCH₃)₄] with thiopivalic and thiobenzoic acid in the presence of -picoline or pyridine. The appearance of the oxo-oxygens and sulfido-sulfur as well as sulfato ligand is explained by the molybdenum-catalyzed oxidation of thiocarboxylates.     

An Inorganic-Organic Hybrid Supramolecular Hydrogen-Bonding and π-π Stacking Network Containing Ge4S4− 10 Cluster: Synthesis and Characterization of (H2bipy)2Ge4S10⋅(bipy)⋅7H2O (bipy=4,4′-bipy)

The reactions of TMA₄Ge₄S₁₀ (TMA=tetramethylammonium), Cu(NO₃)₂3H₂Oand 4,4-bipy under hydrothermal environment result in the formation of (H₂bipy)₂Ge₄S₁₀(bipy)7H₂O (1), which has been structurally characterized by single crystal X-ray analysis. The 3-D structure of 1 can be viewed as an inorganic-organic hybrid supramolecular hydrogen-bonding (hydrogen bonds: O–HO, N–HN, C–HO, N–HO, and O–HS) and - stacking network containing Ge₄S^4– ₁₀ clusters and novel [H₂bipybipyH₂bipy] trimers.     

Adsorption behavior of polymers having phosphoric acid group on γ-Fe2O3 and magnetic characteristics in magnetic coatings

Polymers having phosphoric acid groups were prepared as a model binder for magnetic coatings, and the correlation among the adsorption behavior of the polymers onto-Fe₂O₃ particles and the dispersibility, the orientation, and the packing density of-Fe₂O₃ particles in the magnetic coatings was investigated.PMMA homopolymer molecules hardly adsorbed on-Fe₂O₃, and the interfacial tension at a water/polymer solution (toluene) interface ( _W/T) was scarcely changed compared with a water/toluene interface. Increasing with the content of polymeric phosphoric acid group, the adsorbance of polymer increased and the interfacial tension ( _W/T) decreased. When the content of polymeric phosphoric acid groups was over 0.4 mol%, the adsorbance of polymer and interfacial tension ( _W/T ) remained constant. When these polymers were used as a binder for magnetic tapes, the dispersibility of-Fe₂O₃ in the magnetic coatings was improved, increasing with the content of polymeric phosphoric acid group; however, when the content of phosphoric acid group was over 0.2 mol%, its dispersibility decreased abruptly.Studies on Recording Magnetic Materials and Magnetic Composite. XVIII.     

Conductive Hydrogels: Mechanically Robust Hybrids for Use as Biomaterials

A hybrid system for producing conducting polymers within a doping hydrogel mesh is presented. These conductive hydrogels demonstrate comparable electroactivity to conventional conducting polymers without requiring the need for mobile doping ions which are typically used in literature. These hybrids have superior mechanical stability and a modulus significantly closer to neural tissue than materials which are commonly used for medical electrodes. Additionally they are shown to support the attachment and differentiation of neural like cells, with improved interaction when compared to homogeneous hydrogels. The system provides flexibility such that biologic incorporation can be tailored for application.

     

General features of the reaction of 4,4′-difluorobenzophenone with potassium diphenoxide of 2,2-bis (4-hydroxyphenyl)propane

The major factors determining molecular weights of polyarylene-ether ketones formed by the reaction of 4,4-difluorobenzophenone with 2,2-bis(4-hydroxyphenyl)propane in the presence of K₂CO₃ were revealed. The optimum conditions for the preparation of high-molecular-weight polymers were found, and it was demonstrated that it is possible to control their molecular weights ( from 10 000 to 200 000).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2526–2530, October, 1996.     

Determination of arsenic in glass and raw materials for glass via quartz-tube hydride generation AAS after separation by solvent extraction

Summary A method is described for the determination of traces of arsenic in glass and raw materials for glass. After a digestion with hydrofluoric acid/sulphuric acid for glass and silica containing materials and varied digestion variants the arsenic is separated from the sample matrix by solvent-extraction of arsenic(III) chloride with toluene and back-extraction into water. The following determination is made by hydride generation atomic absorption spectrometry after atomisation in a heated quartz tube. A volatilization of arsenic during the digestion, different reagents for the oxidation and reduction of arsenic as well as the selectivity of the solvent extraction with regard to different interfering elements were investigated. It has been found that with the method developed, also at high concentrations of interfering elements, arsenic can be separated and a nearly interference-free determination of arsenic in glass and in raw materials for glass is possible. For example, at antimony concentrations of 60% (m/m) in the sample the detection limit is 0.5 g/g As₂O₃. The over-all detection limit is 0.05 g/g As₂O₃. The relative standard deviation is 5.7% (n=4) at a concentration of 3.6 g/g As₂O₃.     

Graphene-wrapped Ni2P materials: a 3D porous architecture with improved electrochemical performance

Ni₂P/graphene hybrid with a 3D architecture has been successfully accomplished through a series of controlled chemical processes. In contrast to random mixture of Ni₂P nanoparticles and graphene nanosheets, the architecture hybrid exhibits superior electrochemical stability because the Ni₂P nanoparticles are firmly riveted on the graphene sheets. The 3D graphene network enhances the electrical conductivity over the 2D nanostructure. As anode materials for lithium-ion batteries, the graphene-wrapped Ni₂P nanoparticles can deliver a reversible capacity of ~400 mAh g^?1 after 30 cycles with nearly no fading and also exhibit a good rate performance. The graphene network can serve as a conducting network for fast electron transfer from all directions between the active materials and charge collector, and better buffer spaces to accommodate the volume expansion/contraction during discharge/charge process, which can be considered to contribute to the remarkable cyclic stability, thereby pointing to a new synthetic route to hybridizing graphene with active materials for advanced lithium ion batteries.

Hybrid Slater–Gaussian-type 1s orbitals for the 1∑ ground state of H2 and He

Introduction of noninteger powers of r (or the elliptical coordinate ξ) in the definition of the 1s AO is shown to give better approximate wave-functions for the ground states of H₂ and He than other functions of comparable complexity. This trend is examined for various definitions of hybrid Slater–Gaussian orbitals using a limited CI . The best optimized single-term expansion energy is only 0.000160 a.u. above the “SCF limit” for H₂ at R = 1.4 a.u. and 0.000382 a.u. for He at R = 1.3 a.u.     

Thermal Plasma Chemical Vapor Deposition of Si-Based Ceramic Coatings from Liquid Precursors

In this paper a process based on the use of rf inductively coupled plasma is applied for the synthesis and deposition of Si-base ceramic materials (i.e., SiC, Si₃N₄, SiO₂). The starting materials are low-cost liquid disilanes. The atomization process is first investigated and the structure of the resulting coatings is characterized by means of X-ray diffraction, scanning electron microscopy as well as with transmission electron microscopy. Results of the influence of some processing parameters (i.e., chamber pressure, spray distance, substrate cooling, plasma gas nature and composition, precursor composition and atomization parameters) on the phase and microstructure of the coating is reported. Control of the microstructure (or nanostructure) as well as the phase content, namely the / ratio of the phases for SiC and Si3N4, can be achieved with such a synthesis and deposition technique.