Determination of the hydrogen-bonding induced local viscosity enhancement in room temperature ionic liquids via femtosecond time-resolved depleted spontaneous emission

The fluorescence depletion dynamics of Rhodamine 700 (R-700) molecules in room temperature ionic liquids (RTILs) 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF(4)]) and 1-hydroxyethyl-3-methylimidazolium tetrafluoroborate ([HOemim][BF(4)]) were investigated to determine the local viscosity of the microenvironment surrounding the fluorescent molecules, which is induced by strong hydrogen bonding interaction between cationic and anionic components in RTILs. The solvation and rotation dynamics of R-700 molecules in RTILs show slower time constants relative to that in conventional protic solvents with the same bulk viscosity, indicating that the probe molecule is facing a more viscous microenvironment in RTILs than in conventional solvents because of the strong hydrogen bonding interaction between cationic and anionic components. In addition, this effect is more pronounced in hydroxyl-functionalized ionic liquid than in the regular RTIL due to the presence of a hydroxyl group as a strong hydrogen bonding donor. The hydrogen-bonding-induced local viscosity enhancement effect related to the heterogeneity character of RTILs is confirmed by the nonexponential rotational relaxation of R-700 determined by time-correlated single photon counting (TCSPC). The geometry of hydrogen bonding complexes with different components and sizes are further optimized by density functional theory methods to show the possible hydrogen-bond networks. A model of the hydrogen-bonding network in RTILs is further proposed to interpret the observed specific solvation and local viscosity enhancement effect in RTILs, where most of the fluoroprobes exist as the free nonbonding species in the RTIL solutions and are surrounded by the hydrogen-bonding network formed by the strong hydrogen-bonding between the cationic and anionic components in RTIL. The optimized geometry of hydrogen bonding complexes with different components and sizes by density functional theory methods confirms the local viscosity enhancement effect deduced from fluorescence depletion and TCSPC experiments. The calculated interaction energies reveal the existence of the stronger hydrogen bonding network in RTILs (especially in hydroxyl-functionalized ionic liquid) than that in conventional protic solvent, which leads to the enhancement effect of local microviscosity, and therefore leads to the slow solvation and rotation dynamics of probe molecules observed in RTILs.     

Characterization of phosphonium ionic liquids through a linear solvation energy relationship and their use as GLC stationary phases

In recent years, room temperature ionic liquids (RTILs) have proven to be of great interest to analytical chemists. One important development is the use of RTILs as highly thermally stable GLC stationary phases. To date, nearly all of the RTIL stationary phases have been nitrogen-based (ammonium, pyrrolidinium, imidazolium, etc.). In this work, eight new monocationic and three new dicationic phosphonium-based RTILs are used as gas–liquid chromatography (GLC) stationary phases. Inverse gas chromatography (GC) analyses are used to study the solvation properties of the phosphonium RTILs through a linear solvation energy model. This model describes the multiple solvation interactions that the phosphonium RTILs can undergo and is useful in understanding their properties. In addition, the phosphonium-based stationary phases are used to separate complex analyte mixtures by GLC. Results show that the small differences in the solvent properties of the phosphonium ILs compared with ammonium-based ILs will allow for different and unique separation selectivities. Also, the phosphonium-based stationary phases tend to be more thermally stable than nitrogen-based ILs, which is an advantage in many GC applications.     

Europium(III) and its halides in anhydrous room-temperature imidazolium-based ionic liquids: a combined TRES, EXAFS, and molecular dynamics study

Combining spectroscopic techniques (TRES and EXAFS) and molecular dynamics simulations, we have investigated the state of trivalent europium dissolved in room-temperature ionic liquids (RTILs), as a function of the RTIL anion and in the presence of added chloride anions. The studied RTILs are based on the 1-butyl-3-methyl-imidazolium (Bumim+) cation and differ by their anionic counterparts: BF4-, PF6-, Tf- (triflate, CF3SO3-), and Tf2N- [(CF3SO2)2N-]. The results show the strong influence of the RTIL nature on the first solvation shell of europium and on its complexation with chloride. Depending on the RTIL, europium(III), which was introduced in solution as a triflate salt, is found to be solvated either by RTIL anions only or as neutral undissociated EuTf3 moieties completed by solvent anions. Kinetic effects, related to the viscosity of the RTIL and the nature of the europium salt, also markedly influence the coordination of added Cl- or F- anions to the metal.     

Ester Modified Pyrrolidinium Based Ionic Liquids as Electrolyte Component Candidates in Rechargeable Lithium Batteries

Room temperature ionic liquids (RTILs), especially pyrrolidinium based RTILs with bis(trifluoromethane‐sulfonyl)imide (TFSI) as counterion, are frequently proposed as promising electrolyte component candidates thanks to their high thermal as well as high oxidation stability. In order to avoid a resource intensive experimental approach, mainly based on trial and error experiments, a computational screening method for pre‐selecting suitable candidate molecules was adopted and three homologous series compounds were synthesized by modifying the cation structure of pyrrolidinium RTILs. The obtained high purity RTILs: methyl‐methylcarboxymethyl pyrrolidinium TFSI (MMMPyrTFSI), methyl‐ethylcarboxymethyl pyrrolidinium TFSI (MEMPyrTFSI) and methylpropylcarboxymethyl pyrrolidinium TFSI (MPMPyrTFSI) revealed excellent thermal stabilities higher than 300 °C. Furthermore, MMMPyrTFSI and MPMPyrTFSI exhibit high oxidation stability up to 5.4 V vs. Li/Li⁺. No aluminum corrosion of current collector was observed at 5 V vs. Li/Li⁺. In addition to that, these RTILs display a superior salt (LiTFSI) solubility (3.0–3.5 M), compared to the unmodified RTIL 1‐butyl‐1‐methylpyrrolidinium TFSI (Pyr₁₄TFSI) (1.5–2.0 M) at room temperature. All these properties make novel ester modified RTILs promising and interesting candidates for application in rechargeable lithium batteries.     

Micro/nanotribological behaviors of ionic liquid nanofilms with different functional cations

Four kinds of molecularly thin films of room temperature ionic liquids (RTILs) with different functional cations were prepared on silicon substrates by dip‐coating method. Thermal stability of the RTILs was evaluated using Mettler thermal gravity analysis (TGA) in a nitrogen atmosphere. Chemical compositions of the RTIL nanofilms were examined by means of multifunctional XPS. Nanoscaled adhesion and friction forces between the films and AFM tip were measured by FFM whereas the morphologies of the films were also investigated. Microscaled friction and wear behaviors between the films and Si₃N₄ ball were further measured by the microtribometer. The micro/nanotribological behaviors of different RTIL films were comparatively investigated and discussed in terms of functional cations of the RTILs molecules. Results in this paper revealed that the functional cations of the RTIL films significantly affected their tribological behaviors both in micro‐ and nanoscales. The corresponding micro/nanotribological mechanism of the tested ultrathin RTIL films under the test conditions was consequently proposed based on the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

Room Temperature Ionic Liquid Carbon Nanotube Paste Electrodes: Overcoming Large Capacitive Currents Using Rotating Disk Electrodes

The voltammetric response of graphite or carbon nanotube paste electrodes, which incorporate the room temperature ionic liquid, N‐butyl‐N‐methyl pyrrolidinium bis(trifluoromethylsulfonyl) imide or [C₄mpyrr][NTf₂], (RTIL‐CNTPE and RTIL‐CPE respectively) as the binder, towards anionic, cationic and neutral redox probes is examined and compared to conventional paste electrodes which use mineral oil as the binder. The RTIL paste electrodes are found to suffer from very large background currents due to capacitive charging. This is exacerbated further when CNTs are combined with RTILs in the paste. The large charging currents obscure any Faradaic processes of interest, especially at low analyte concentrations. By employing steady state voltammetry at a rotating disk electrode made of the RTIL pastes this problem can be overcome. This allows the electroanalytical properties of these interesting electrode substrates, which combine the attractive properties of CNTs with RTILs to be further explored and developed.     

Understanding the wettability of nanometer-thick room temperature ionic liquids (RTILs) on solid surfaces

Many important applications of room temperature ionic liquids(RTILs), e.g., lubrication, energy storage and catalysis, involve RTILs confined to solid surfaces. In order to optimize the performance, it is critical to understand the wettability of nanometer-thick RTILs on solid surfaces. In this review, the recent progress in this filed is presented. First, the macroscopic wettability of RTILs on solids will be discussed briefly.Afterwards, the wetting of nanometer-thick RTILs will be discussed with the emphasis on RTIL/mica and RTIL/graphite interfaces since mica and graphite not only are mostly studied but also have important real-life applications. For RTIL/mica interface, the extended layering that promotes the wetting has been extensively reported and it is generally accepted that the electrostatic interaction at the RTIL/mica interface is the key. However, recent works from others and us highlight the unexpected effect of water:Water enables ion exchange between K+and the cations of RTILs on the mica surface and thus triggers the ordered packing of cations/anions in RTILs, resulting in extended layering. Different from mica, there is no electrical charge on the graphite surface. Interestingly, previous reports showed inconsistent results on the wettability of RTILs on graphite. Recent research from others and us suggested that π-π~+stacking between sp~2 carbon and the imidazoliumcation in the RTILs is the key to the extended layering and enhanced wettability of RTILs. Lastly, the future research directions will be briefly discussed.     

Dipolar solvation dynamics in room temperature ionic liquids: an effective medium calculation using dielectric relaxation data

Solvation dynamics in four imidazolium cation based room temperature ionic liquids (RTIL) have been calculated by using the recently measured dielectric relaxation data [ J. Phys. Chem. B 2008, 112, 4854 ] as an input in a molecular hydrodynamic theory developed earlier for studying solvation energy relaxation in polar solvents. Coumarin 153 (C153), 4-aminophthalimide (4-AP), and trans-4-dimethylamino-4'-cyanostilbene (DCS) have been used as probe molecules for this purpose. The medium response to a laser-excited probe molecule in an ionic liquid is approximated by that in an effective dipolar medium. The calculated decays of the solvent response function for these RTILs have been found to be biphasic and the decay time constants agree well with the available experimental and computer simulation results. Also, no probe dependence has been found for the average solvation times in these ionic liquids. In addition, dipolar solvation dynamics have been predicted for two other RTILs for which experimental results are not available yet. These predictions should be tested against experiments and/or simulation studies.     

Synthesis of Carbonyl Compounds from Alcohols Using Electrochemically Generated Superoxide Ions in RTILs

Abstract

We show that the superoxide ion (O₂ ^??) generated electrochemically from oxygen dissolved in room-temperature ionic liquids (RTILs) reacts with primary and secondary alcohols to form the corresponding ketones and carboxylic acids, respectively. Specifically, we study the conversion of benzhydrol to benzophenone and benzyl alcohol to benzaldehyde/benzoic acid. The kinetics (e.g., rate, selectivity, and yield) for these reactions are also determined as functions of the variations in the structure of the ionic liquids. The RTILs used here are imidazolium-based cations where the functional groups on the imidazolium ring are modified. Specifically, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], 1-butyl-2,3-dimethylimidazolium hexafluorophosphate [bdmim][PF₆], and 1-hexyl-3-methylimidazolium hexafluorophosphate [hmim][PF₆] are used as the reaction medium. These results are compared to an ammonium-based RTIL (N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide). The results show that the nucleophilic attack by the O₂ ^?? of both the RTIL and the alcohol, especially that of the H atom at the R2 position of the [bmim][PF₆] and [hmim][PF₆], greatly affects the yields. No RTIL degradation products were detected for the reactions in [bdmim][PF₆] and N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. For the benzyl alcohol oxidation reaction in the RTIL, N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide, benzaldehyde formed did not undergo further oxidation to form benzoic acid, which may be due to the greater hydrophobicity of this RTIL. The competitive reaction kinetics between the alcohol and RTIL component must be considered in the selection of the RTIL solvent system.     

Interfacial tension and electrocapillary measurements of the room temperature ionic liquid/aqueous interface

The surface and aqueous interfacial tensions for a series of water-immiscible room-temperature ionic liquids (RTILs) have been measured. The RTILs used in this study were based on 1-alkyl-3-methylimidazolium cations (Cnmim, n=6, 8, 10, and 12) and bis(perfluoromethylsulfonyl)imide (BMSI) and bis(perfluoroethylsulfonyl)imide (BETI) anions. It was found that the surface tensions of the RTILs increased with an increasing cation chain length similar to the behavior of n-alkanes. Interfacial tensions of the RTILs with aqueous solutions, however, were found to decrease with the cation chain length, which has been attributed to the increased surface activity of the longer chain cations. We have also demonstrated the first use of electrocapillary measurements to study the polarizable RTIL/aqueous interfaces. From the electrocapillary data, the potential of zero charge (PZC) for these RTIL/aqueous interfaces was determined, as well as the relative surface excess charge and capacitance. The PZC was found to be dependent upon the structure of the anions and cations with PZC values ranging from -357 mV for C6mimBETI and -161 mV for C10mimBMSI. The electrocapillary results also show that the cations of the RTIL are becoming increasingly surface-active as the alkyl chain on the cation is lengthened, thereby modulating the interfacial potential.     

Synthesis of copolyimides based on room temperature ionic liquid diamines

Block copolyimides based on aromatic dianhydrides and diamines copolymerized with diamino room temperature ionic liquid (RTIL) monomers were synthesized over a range of compositions. Specifically, two diamino RTILs, 1,3‐di(3‐aminopropyl) imidazolium bis[(trifluoromethyl)sulfonyl] imide ([DAPIM] [NTf₂]) and 1,12‐di[3‐(3‐aminopropyl) imidazolium] dodecane bis[(trifluoromethyl) sulfonyl] imide ([C₁₂ (DAPIM)₂] [NTf₂]₂) were synthesized using a Boc protection method. The two RTILs were reacted with 2,2‐bis(3,4‐carboxylphenyl) hexafluoropropane dianhydride (6FDA) to produce 6FDA‐RTILs oligomers that formed the RTIL component for the block copolyimides. The oligomers were reacted with 6FDA and m‐phenylenediamine (MDA) at oligomer concentration from 6.5 to 25.8 mol % to form block copolyimides. Increasing the concentration of the 6FDA‐RTIL oligomer in the block copolyimides resulted in a decrease in the thermal degradation temperature, glass transition temperature and an increase in the density. The gas permeability of the RTIL based block copolyimide decreased but the ideal permeability selectivity for CO₂/CH₄ gas pair increased relative to the pure 6FDA‐MDA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4036–4046, 2010     

Characterization of a Novel Intrinsic Luminescent Room‐Temperature Ionic Liquid Based on [P6,6,6,14][ANS]

Intrinsically luminescent room‐temperature ionic liquids (RTILs) can be prepared by combining a luminescent anion (more common) or cation with appropriate counter ions, rendering new luminescent soft materials. These RTILs are still new, and many of their photochemical properties are not well known. A novel intrinsic luminescent RTIL based on the 8‐anilinonaphthalene‐1‐sulfonate ([ANS]) anion combined with the trihexyltetradecylphosphonium ([P_6,6,6,14]) cation was prepared and characterized by spectroscopic techniques. Detailed photophysical studies highlight the influence of the ionic liquid environment on the ANS fluorescence, which together with rheological and ¹H NMR experiments illustrate the effects of both the viscosity and electrostatic interactions between the ions. This material is liquid at room temperature and possesses a glass transition temperature (T_g) of 230.4 K. The fluorescence is not highly sensitive to factors such as temperature, but owing to its high viscosity, dynamic Stokes shift measurements reveal very slow components for the IL relaxation.     

Influence of Surface Properties on SEM Observation for Carbon Nanotubes with Pretreatment Using Room Temperature Ionic Liquids

In this study, we observed hydrophobic or hydrophilic carbon nanotubes (CNTs) by scanning electron microscopy (SEM); the samples were pretreated with room temperature ionic liquids (RTILs) to impart electrical conductivity to their surfaces. When the amount of RTIL on the sample surface and the affinity between the RTIL and sample surface were tuned, suitable electroconductive thin layers were formed on the sample surfaces. The presence of these layers allowed high-quality SEM images to be observed at the nano level. Suitable pretreatments for CNT were achieved using dilute RTIL/ethanol solutions. By optimizing these conditions, we acquired SEM images that were similar in quality to those of samples subjected to the conventional pretreatment of metal sputtering. The highest resolution of the SEM images was less than 30 nm.     

Near-Infrared Spectroscopic Investigation of Inclusion Complex Formation of Cyclodextrins in Room-Temperature Ionic Liquid

Near-infrared spectrometry has been successfully used to determine association binding constants between phenol and -, - and -cyclodextrin (CD) in [butylmethylimidazolium][chloride] room-temperature ionic liquid (RTIL). It was found that adding CD into the RTIL solution of phenol resulted in an enhancement in the absorption coefficient of the stretching overtone of the aromatic C–H groups. However, the enhancement induced by CDs in RTIL is much lower (order of magnitude) than those corresponding in D₂O. The binding constants in RTIL are also much lower than those in D₂O ((11 ± 2) M^-1, (16 ± 2) M^-1and(40 ± 6) M^-1forphenol and -, - and -CD, respectively. compared to 87 M^-1and 214 M^-1for - and -CD in D₂O). The results obtained seem to suggest that in ionic liquid, the main interaction between phenol and CDs may not be inclusion complex formation but rather external adsorption. A variety of reasons may be responsible for relatively weaker interactions and lower binding constants in ionic liquid including differences in the polarity and viscosity of RTIL and D₂O. However, the main reason may be due to the fact that the cation of the ionic liquid (i.e., butylmethylimidazolium ion) may form inclusion complexes with the cyclodextrin, thereby preventing phenol from being included in cavity of CDs.     

Cations in a Molecular Funnel: Vibrational Spectroscopy of Isolated Cyclodextrin Complexes with Alkali Metals

The benchmark inclusion complexes formed by α‐cyclodextrin (αCD) with alkali‐metal cations are investigated under isolated conditions in the gas phase. The relative αCD‐M⁺ (M=Li⁺, Na⁺, K⁺, Cs⁺) binding affinities and the structure of the complexes are determined from a combination of mass spectrometry, infrared action spectroscopy and quantum chemical computations. Solvent‐free laser desorption measurements reveal a trend of decreasing stability of the isolated complexes with increasing size of the cation guest. The experimental infrared spectra are qualitatively similar for the complexes with the four cations investigated, and are consistent with the binding of the cation within the primary face of the cyclodextrin, as predicted by the quantum computations (B3LYP/6‐31+G*). The inclusion of the quantum‐chemical cation disrupts the C₆ symmetry of the free cyclodextrin to provide the optimum coordination of the cations with the ‐CH₂OH groups in C₁, C₂ or C₃ symmetry arrangements that are determined by the size of the cation.     

Electronic Structure Insights into the Solvation of Magnesium Ions with Cyclic and Acyclic Carbonates

A computational framework to rank the solvation behavior of Mg²⁺ in carbonates by using molecular dynamics simulations and density functional theory is reported. Based on the binding energies and enthalpies of solvation calculated at the M06‐2X/6‐311++G(d,p) level of theory and the free energies of solvation from ABF‐MD simulations, we find that ethylene carbonate (EC) and the ethylene carbonate:propylene carbonate (EC:PC) binary mixture are the best carbonate solvents for interacting with Mg²⁺. Natural bond orbital and quantum theory of atoms in molecules analyses support the thermochemistry calculations with the highest values of charge transfer, perturbative stabilization energies, electron densities, and Wiberg bond indices being observed in the Mg²⁺(EC) and Mg²⁺(EC:PC) complexes. The plots of the noncovalent interactions indicate that those responsible for the formation of Mg²⁺ carbonate complexes are strong‐to‐weak attractive interactions, depending on the regions that are interacting. Finally, density of state calculations indicate that the interactions between Mg²⁺ and the carbonate solvents affects the HOMO and LUMO states of all carbonate solvents and moves them to more negative energy values.     

Thermodynamics of cesium complexes formation with 18-crown-6 in ionic liquids

Thermodynamic data for cesium complexes formation with 18-crown-6 (18C6, L) [Cs(18C6)]⁺ in N-butyl-4-methyl-pyridinium tetrafluoroborate ([BMPy][BF₄], I), in 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄], II) and in 1-butyl-3-methylimidazolium dicyanamide ([BMIM][N(CN)₂], III) were measured with NMR ¹³³Cs technique at 23–50 °C. The stability of cesium complex in RTILs is estimated to be in the range between water and DMFA. Stability constants for [Cs(18C6)]⁺ are found to decrease as temperature is increasing. The following values for lgK(Cs+L) and ΔH(Cs+L) at 23 °C are determined: 2.6 (0.3), ?47(1) kJ/mol (RTIL I); 2.8(0.3), ?80(3) kJ/mol (RTIL II) and 3.03 (0.08), ?47(2) kJ/mol (RTIL III). It is demonstrated that enthalpy change promotes complex formation while the corresponding change of entropy is negative and provides decomposition of [Cs(18C6)]⁺.     

Electrocatalysis of Chemical Warfare Agent Sulfur Mustard in Room Temperature Ionic Liquid

Room temperature ionic liquids (RTILs) have the potential for being ideal alternatives for organic solvents in chemical warfare agent (CWA) electrochemical reactions. In this paper, electrocatalysis of CWA sulfur mustard (SM) was achieved by exploring the potential advantage of RTIL methyltrioctylammonium bis (trifluoromethylsulfonyl) imide and further this methodology was used for the detection of CWA. The hydrophobicity of this RTIL offers the opportunity to use this methodology in field condition without environmental humidity effect. The diffusion coefficient calculated for SM in RTIL was 0.196×10⁻⁹ cm²/s. The electrochemical parameters deduced from cyclic voltammetry such as electron transfer coefficient (α), electron transfer number (n) and heterogenous rate constant were estimated 0.11, 2 and 4.41 s⁻¹, respectively. The electrocatalytic activity of the RTIL toward the electrochemical reduction and oxidation of CWA is evidenced, showing the potential of this novel approach for the oxidation of other toxic CWAs. The new RTIL based strategy provides an opportunity to develop field deployable detection of CWA and could provide a new paradigm shift in CWA detection approach, addressing the escalating threat of CWA.     

Room temperature ionic liquids structure and its effect on the mononuclear rearrangement of heterocycles: an approach using thermodynamic parameters

The kinetics of the rearrangement of the Z-phenylhydrazone of 3-benzoyl-5-phenyl-1,2,4-oxadiazole (1) into the relevant 4-benzoylamino-2,5-diphenyl-1,2,3-triazole (2) induced by amines have been studied in five room-temperature ionic liquids (RTILs) at different temperatures. The kinetic data collected show that both cationic and anionic parts of RTILs significantly influence the reactivity of the title reaction. The calculated activation parameters allow us to advance hypotheses about the weak interactions operating in RTIL solutions.     

Intermolecular interaction-induced hierarchical transformation in 1D nanohybrids: analysis of conformational changes by 2D correlation spectroscopy

We have examined both self-assembly and confinement effect in room-temperature ionic liquid (RTIL)-aluminum hydroxide hybrids (RAHs) to attain a fundamental understanding of special phenomena in nanoscale spaces as well as to design functional nanomaterials for practical applications. Phase-controlled one-dimensional (1D) RAHs were synthesized through a simple ionothermal process. The RAHs were hierarchically transformed in terms of the molecular structures, morphologies, and phases of the materials during the ionothermal process with respect to the concentration of RTIL. In addition to the hierarchical transformation, the RTIL/aluminum hydroxide nanohybrids revealed unexpected physical behaviors, including thermal transition variation of the RTIL in confined environments and a phase transition from nanosolid to nanoliquid affected by changes of the melting points. More importantly, intermolecular interaction induced-self-assembly and confinement effect of RTILs inside an integrated hybrid system, which have not been clearly explained to date, were analyzed by 2D infrared correlation spectroscopy (2D IR COS); dynamic behaviors of RTILs, i.e., sequentially spatial reorientation and kinetically conformational changes, were attributed to the interactions between RTILs and aluminum hydroxides. 2D IR COS offers a new way to interpret highly complex, veiled systems such as the formation mechanism of nanoparticles, biomineralization, self/supramolecular assembly, and nanoconfinement.