呫吨染料合成方法研究进展

呫吨染料是一类重要荧光染料,其良好的光物理性质使其得到了广泛应用。呫吨染料一般通过富电子的间苯二酚(或间氨基苯酚)与邻苯二甲酸酐在酸催化条件下缩合得到。近年来,呫吨染料在生物显微成像领域获得广泛应用,染料结构也日趋复杂,传统的合成方法不能满足需要,因而不断有新的呫吨染料合成方法见诸文献。本文简要概述了既有呫吨染料合成路线,并分析讨论了各方法的优缺点及适用底物范围。     

Controlled Synthesis of Luminescent Xanthene Dyes and Use of Ionic Liquid in Thermochromic Reaction

In this study, we demonstrate six novel xanthene derivatives and their spectroscopic and chemical properties. The presented synthesis examination allowed us to obtain two different compounds during one step, with open and closed lactone rings substituted with different length alkyl chains. Increasing the reaction efficiency to 77% was obtained using the microwave-assisted method. Moreover, the modification of O-alkylation synthesis in an ecofriendly way using a ball mill led to achieving exclusively one opened ring product. All of the synthesized compounds showed different spectroscopic behaviors in comparison with the different organic dyes; the typical concentration quenching of luminescence was not observed. The relationship between the length of the alkyl chain and the time of luminescence decay is presented. Synthetized closed forms of dyes turned out to be promising leuco dyes. For the first time, an ionic liquid was used as a developer of synthesized xanthene derivatives (as leuco dyes), which led to obtaining an irreversible thermochromic marker.     

Synthesis and Optical Properties of Water‐Soluble Polyglycerol‐Dendronized Rylene Bisimide Dyes

Four new water‐soluble polyglycerol‐dendronized perylene, terrylene, and quaterrylene bisimides have been synthesized and characterized with respect to their optical properties in polar organic solvents and water by using UV/Vis and fluorescence spectroscopy. All of these dyes were highly soluble in water, but the size of the chosen polyglycerol dendron was only sufficient to completely suppress dye aggregation for the core‐unsubstituted perylene derivative. Their high solubility in water and their absorption and emission wavelengths up to the NIR region make the core‐unsubstituted perylene and terrylene bisimides ideal candidates for applications in bioimaging, whilst the lack of fluorescence for quaterrylene bisimide in all polar solvents does not warrant further investigation of this chromophore in fluorescence and imaging applications. Likewise, tuning of the emission of rylene bisimides towards longer wavelengths by employing electron‐donating bay substituents is not a promising strategy, owing to the lower fluorescence quantum yields in polar solvents and, in particular, in water.     

Cyclo-Ketal Xanthene Dyes: A New Class of Near-Infrared Fluorophores for Super-Resolution Imaging of Live Cells

Newly emerging super-resolution imaging techniques provide opportunities for precise observations on cellular microstructures. However, they also impose severe demands on fluorophores. Here, we develop a new series of NIR xanthene dyes, named as KRh s, by replacing the 10-position O of rhodamines with a cyclo-ketal. KRh s display an intense NIR emission peak at 700 nm with fluorescence quantum yields up to 0.64. More importantly, they, without the aid of enhancing buffer, exhibit stochastic fluorescence off–on switches to support time-resolved localization of single fluorophore. KRh s are functionalized into KRh-MitoFix , KRh-Mem and KRh-Halo that demonstrate mitochondria, plasma membrane and fusion protein targeting ability, respectively. Consequently, these KRh probes demonstrate straightforward usage for super-resolution imaging of these targets in live cells. Therefore, KRh s merit future development for fluorescence labeling and super-resolution imaging in the NIR region.     

Monofluorination and Trifluoromethylation of BODIPY Dyes for Prolonged Single‐Molecule Detection

Electrophilic monofluorination with Selectfluor and nucleophilic trifluoromethylation with the Ruppert–Prakesh reagent of dimethyl‐, tetramethyl‐ and pentamethyl‐substituted boron dipyrromethenes (BODIPY) are investigated. Monofluorinated dyes are synthesized with low yields (<30 %), however trifluoromethyl derivatives are obtained in moderate to high yields (≈40–90 %). All compounds are characterized by steady‐state and time‐resolved fluorescence spectroscopy, the photostability is investigated with fluorescence correlation spectroscopy (FCS) and total internal reflection fluorescence microscopy (TIRF). Monofluorination hardly affects the spectroscopic parameters of the unsubstituted parent compounds, but distinctly enhances the photostability, whereas trifluoromethylation leads to a hypsochromic shift by up to 17 nm in both absorption and emission, slightly enhanced intersystem crossing, and higher photostability. Further development of soft fluorination and trifluoromethylation methods is therefore highly desired.     

Photopolymerization of Butyl Methacrylate in the Presence of Nanoparticles of ZnO,Sensitized to Visible Light with Xanthene Dyes

The photopolymerization of butyl methacrylate in isopropanol with participation of nanoparticles of wide-gap semiconductor ZnO has been studied. The possibility of sensitizing ZnO nanoparticles to visible light with a series of halogenated fluoresceins has been established. The rate of photoinitiation of polymerization in the systems studied is principally determined by the rate of electron transfer from the photoexcited molecule of the sensitizer into the conduction zone of the semiconductor nanoparticles.     

Stimuli-Responsive Delivery of Antimicrobial Peptides Using Polyelectrolyte Complexes

Antimicrobial peptides (AMPs) are antibiotics with the potential to address antimicrobial resistance. However, their translation to the clinic is hampered by issues such as off-target toxicity and low stability in biological media. Stimuli-responsive delivery from polyelectrolyte complexes offers a simple avenue to address these limitations, wherein delivery is triggered by changes occurring during microbial infection. The review first provides an overview of pH-responsive delivery, which exploits the intrinsic pH-responsive nature of polyelectrolytes as a mechanism to deliver these antimicrobials. The examples included illustrate the challenges faced when developing these systems, in particular balancing antimicrobial efficacy and stability, and the potential of this approach to prepare switchable surfaces or nanoparticles for intracellular delivery. The review subsequently highlights the use of other stimuli associated with microbial infection, such as the expression of degrading enzymes or changes in temperature. Polyelectrolyte complexes with dual stimuli-response based on pH and temperature are also discussed. Finally, the review presents a summary and an outlook of the challenges and opportunities faced by this field. This review is expected to encourage researchers to develop stimuli-responsive polyelectrolyte complexes that increase the stability of AMPs while providing targeted delivery, and thereby facilitate the translation of these antimicrobials.     

Two‐Photon Absorption Cross‐Sections of Reference Dyes: A Critical Examination

The electronic structure and one‐ and two‐photon absorption spectra of four fluorophores, p‐bis(o‐methoxystyryl)benzene (Bis‐MSB), coumarin 307, fluorescein and rhodamine B, commonly used as reference compounds for two‐photon absorption spectra, have been theoretically calculated and compared with available experimental data. The possible reasons for the wide discrepancies in two‐photon absorption cross‐sections reported in the literature are discussed on the basis of the theoretical findings. The role of a solvent environment on the electronic one‐ and two‐photon absorption spectra is also studied. We highlight some necessary precautions that one needs to take when comparing literature results of two‐photon absorption cross‐sections.     

Bright,Fluorescent Dyes Based on Imidazo[1,2‐a]pyridines that are Capable of Two‐Photon Absorption

A library of imidazo[1,2‐a]pyridines was synthesized by using the Gevorgyan method and their linear and non‐linear optical properties were studied. Derivatives that contained both electron‐donating and electron‐withdrawing groups at the 2 position were comprehensively investigated. Their emission quantum yield ranged between 0.2–0.7 and it was shown to depend on the substitution pattern, most notably that on the phenyl ring. Electron‐donating substituents improved the luminescence performance of these compounds, whereas electron‐withdrawing substituents led to a more erratic behavior. Substitution on the six‐membered ring had less effect on the fluorescence properties. Extension of the delocalization increased the luminescence quantum yield. A new quadrupolar system was designed that contained two imidazo[1,2‐a]pyridine units on its periphery and a 1,4‐dicyanobenzene unit at its center. This system exhibited a large Stokes‐shifted luminescence that was affected by the polarity and rigidity of the solvent, which was ascribed to emission from an excited state with strong charge‐transfer character. This quadrupolar feature also led to an acceptable two‐photon absorption response in the NIR region.     

Interactions between Rhodamine Dyes and Model Membrane Systems—Insights from Molecular Dynamics Simulations

Background: rhodamines are dyes widely used as fluorescent tags in cell imaging, probing of mitochondrial membrane potential, and as P-glycoprotein model substrates. In all these applications, detailed understanding of the interaction between rhodamines and biomembranes is fundamental. Methods: we combined atomistic molecular dynamics (MD) simulations and fluorescence spectroscopy to characterize the interaction between rhodamines 123 and B (Rh123 and RhB, respectively) and POPC bilayers. Results: while the xanthene moiety orients roughly parallel to the membrane plane in unrestrained MD simulations, variations on the relative position of the benzoic ring (below the xanthene for Rh123, above it for RhB) were observed, and related to the structure of the two dyes and their interactions with water and lipids. Subtle distinctions were found among different ionization forms of the probes. Experimentally, RhB displayed a lipid/water partition coefficient more than two orders of magnitude higher than Rh123, in agreement with free energy profiles obtained from umbrella sampling MD. Conclusions: this work provided detailed insights on the similarities and differences in the behavior of bilayer-inserted Rh123 and RhB, related to the structure of the probes. The much higher affinity of RhB for the membranes increases the local concentration and explains its higher apparent affinity for P-glycoprotein reconstituted in model membranes.     

Novel Cyanine Dyes: Synthesis,Characterization and Photosensitization‐Structure Correlation

Novel furo, thieno and pyrrolo[2,3‐b]pyrazole cyanine dyes were synthesized. The structure‐photosensitization properties correlation of the dyes were examined in 95% ethanol solution by absorption spectroscopy. The chemical structure of the starting biheterocyclic compounds and their derived cyanine dyes were confirmed by elemental analysis, IR and ¹H NMR spectroscopy.     

Synthesis,Structural Characterization and Luminescence Studies of Di‐ and Trinuclear Gold(I) Alkynyl‐phosphine Complexes

Reactions of the polymer {Au^IC₂Ph}_n with polyphosphine ligands [1,4‐bis(2‐diphenylphosphino‐1H‐imidazol‐1‐yl)‐benzene (dpib), 1,3,5‐tris(4‐diphenylphosphinophenyl)benzene (tppb), 2,2′‐bis(diphenylphosphanyl)‐4,4′‐bipyridine (dpbp), and 3,6‐bis(diphenylphosphanyl)pyridazine (dppz)] afforded four gold(I) alkynyl‐polyphosphine complexes [{AuC₂Ph}₂(μ‐dpib)] ( 1 ), [{AuC₂Ph}₃(μ₃‐tppb)] ( 2 ), [{AuC₂Ph}₂(μ‐dpbp)] ( 3 ), and [{AuC₂Ph}₂(μ‐dppz)] ( 4 ) in nearly quantitative yield. The compounds obtained were characterized using elemental analysis, ESI‐MS, X‐ray crystallography, and polynuclear NMR spectroscopy. Intermolecular aurophilic interaction together with π–π and σ–π stacking build up the supramolecular 3D network of complex 3 , whereas none of these intermolecular bondings were found in the crystal structures of compounds 1 , 2 , and 4 . Complexes 1 – 4 are luminescent both in solution (CH₂Cl₂) and in solid state under laser irradiation (λ_ex = 308 nm). In solution, the diphosphine complexes 1 – 4 display dual emission corresponding to ligand centered transitions (λ_em = 360–375 nm) along with weaker contribution from MLCT excited states at ca. 490 nm. The long wavelength component of the emission plays a dominant role in the solid state luminescence spectra of complexes 1 , 3 , and 4 (460, 544, 520 nm, respectively) whereas the triphosphine complex 2 shows dual luminescence (372 and 520 nm) with considerable contribution from ligand centered excited state.     

Tunable Metal‐Enhanced Fluorescence by Stimuli‐Responsive Polyelectrolyte Interlayer Films

In this paper, we report on the tunable metal‐enhanced fluorescence (MEF) of Ag nanostructures. Because of the good MEF properties of the highly dendritic Ag nanostructures, we obtained an increase of up to 25 times for the weak fluorescence of porphyrin molecules (Por^4–). More importantly, by the introduction of a stimulus‐responsive PAA/PDDA multilayer film as an interlayer, the distance between the fluorophores and the Ag nanostructures could be tuned by immersing the substrates into solutions of different ionic strength or pH. The MEF behavior of the composite films could thus be tuned in a controlled manner, because of the distance dependent nature of the MEF effects.

     

NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

一种具有可逆光加工特性的偶氮聚电解质的合成与表征

合成一种具有可逆光加工特性的偶氮聚电解质(PAA-AZ),用核磁、热分析、紫外-可见光谱、接触角及GPC等手段对其进行了结构和性能表征.PAA-AZ的旋涂膜用线偏振Ar+激光照射一段时间,在原子力显微镜(AFM)下观测其表面,膜表面形成了规整有序纳米尺寸的三维表面图案表面起伏光栅(起伏深度为100nm).用氦氖激光检测了PAA-AZ旋涂膜一级衍射效率与光照时间的关系.     

Synthesis and Spectroscopic Properties of Fused‐Ring‐Expanded Aza‐Boradiazaindacenes

A series of fused‐ring‐expanded aza‐boradiazaindacene (aza‐BODIPY) dyes have been synthesized by reacting arylmagnesium bromides with phthalonitriles or naphthalenedicarbonitriles. An analysis of the structure–property relationships has been carried out based on X‐ray crystallography, optical spectroscopy, and theoretical calculations. Benzo and 1,2‐naphtho‐fused 3,5‐diaryl aza‐BODIPY dyes display markedly red shifted absorption and emission bands in the near‐IR region (>700 nm) due to changes in the energies of the frontier MOs relative to those of 1,3,5,7‐tetraaryl aza‐BODIPYs. Only one 1,2‐naphtho‐fused aza‐BODIPY of the three possible isomers is formed due to steric effects, and 2,3‐naphtho‐fused compounds could not be characterized because the final BF₂ complexes are unstable in solution. The incorporation of a  N(CH₃)₂ group at the para‐positions of a benzo‐fused 3,5‐diaryl aza‐BODIPY quenches the fluorescence in polar solvents and results in a ratiometric pH response, which could be used in future practical applications as an NIR “turn‐on” fluorescence sensor.