Design and development of bioactive α-hydroxy carboxylate group modified MnFe2O4 nanoparticle: Comparative fluorescence study,magnetism and DNA nuclease activity

Three new α-hydroxy carboxylate group functionalized MnFe₂O₄ nanoparticles (NPs) have been developed to explore the microscopic origin of ligand modified fluorescence and magnetic properties of nearly monodispersed MnFe₂O₄ NPs. The surface functionalization has been carried out with three small organic ligands (tartrate, malate, and citrate) having different number of α-hydroxy carboxylate functional group along with steric effect. Detailed study unveils that α-hydroxy carboxylate moiety of the ligands plays key role to generate intrinsic fluorescence in functionalized MnFe₂O₄ NPs through the activation of ligand to metal charge transfer transitions, associated with ligand–Mn²⁺/Fe³⁺ interactions along with d–d transition corresponding to d–orbital energy level splitting of Fe³⁺ ions on NP surface. Further, MnFe₂O₄ NPs show a maximum 140.88% increase in coercivity and 97.95% decrease in magnetization compared to its bare one upon functionalization. The ligands that induce smallest crystal field splitting of d–orbital energy level of transition metal ions are found to result in strongest ferrimagnetic activation of the NPs. Finally, our developed tartrate functionalized MnFe₂O₄ (T-MnFe₂O₄) NPs have been utilized for studying DNA binding interaction and nuclease activity for stimulating their beneficial activities toward diverse biomedical applications. The spectroscopic measurements indicate that T-MnFe₂O₄ NPs bind calf thymus DNA by intercalative mode. The ability of T-MnFe₂O₄ NPs to induce DNA cleavage was studied by gel electrophoresis technique where the complex is found to promote the cleavage of pBR322 plasmid DNA from the super coiled form I to linear coiled form II and nicked coiled form III with good efficiency.     

Polyaniline/CoFe2O4 nanocomposite inhibits the growth of Candida albicans 077 by ROS production

In recent years, polyaniline/CoFe₂O₄ nanocomposites have gained attention because of their wide utilization in optoelectronics and biomedical studies. However, very limited research has been carried out on the anticandidal activity of polyaniline/CoFe₂O₄ nanocomposite against Candida spp. Thus, the study was designed to investigate the anticandidal potential of PANI/CoFe₂O₄ nanocomposite against Candida albicans 077. PANI/CoFe₂O₄ nanocomposite (denoted as “cfPNCs”) was synthesized by polymerization of aniline in the presence of CoFe₂O₄ nanoparticles. The structural and thermal properties of the synthesized PANI/CoFe₂O₄ nanocomposite were investigated. It was noteworthy that PANI/CoFe₂O₄ nanocomposite showed promising anticandidal activity in a dose-dependent manner. Results also showed that the protection of histidine (a ROS quencher) against ROS clearly suggested the implication of ROS in anticandidal activity of PANI/CoFe₂O₄ nanocomposite. It is encouraging to conclude that PANI/CoFe₂O₄ nanocomposite bears the potential of their applications in biomedicine, especially nanotherapy for diseases caused by C. albicans.     

Preparation of magnetic polymer colloids with Brownian magnetic relaxation

Magnetic polymer colloids (MPCs) consisting of CoFe₂O₄ nanoparticles (NPs) embedded in a poly(methyl methacrylate) (PMMA) matrix were synthesized by magnetic miniemulsion polymerization. CoFe₂O₄ NPs were modified with 3-trimethoxysilylpropylmethacrylate and directly emulsified with different concentrations of sodium dodecyl sulfate under ultrasonication for subsequent miniemulsion polymerization. The average diameter of the CoFe₂O₄/PMMA spheres (about 200 nm) was controlled by varying the amount of surfactant. Thermogravimetric analysis indicated that the magnetic content was in the range of 44 to 73 %. Magnetic properties of the dispersions were investigated by measuring equilibrium magnetization curves and the dynamic magnetic susceptibility as a function of frequency. The MPCs were found to follow the Debye model for the dynamic magnetic susceptibility, with a characteristic time given by the rotational hydrodynamic resistance and thermal energy through the Stokes-Einstein relation. This demonstrates that the MPCs respond to applied magnetic fields by rotating. Due to their uniform size and high magnetic loading, these colloids may be suitable in a variety of applications, including nanoscale mechanical probes and actuators in complex fluids and biological systems.     

All-in-one phototheranostics based on BTP-4F-DMO nanoparticles for NIR-II fluorescence/photoacoustic dual-mode imaging and combinational therapy

Various phototheranostics have recently been developed for phototherapy. Through proper molecular design, the photochemical and photophysical properties of these phototheranostics can be promoted. Herein, an acceptor-donor-acceptor (A-D-A)-structured dye, BTP-4F-DMO, was synthesized and prepared into water-soluble nanoparticles (NPs). The obtained BTP-4F-DMO NPs had strong absorption from 650 nm to 850 nm and a fluorescence emission peak at ∼900 nm that tailed to ∼1100 nm. The NPs showed a superhigh photothermal conversion efficiency of 90.5% ± 5% and could simultaneously generate ^•OH and ¹O₂ with a ¹O₂ generation quantum yield of 4.6% under 808 nm laser irradiation. Due to these advanced properties, BTP-4F-DMO NPs can switch the role of autophagy from pro-survival to pro-death, thereby further promoting cancer cell death. These features make BTP-4F-DMO NPs a promising multifunctional phototheranostic agent for NIR-II fluorescence/photoacoustic dual-mode imaging-guided synergetic photodynamic/photothermal therapy. In general, this work provides a strategy for expanding the biomedical applications of organic A-D-A-structured phototheranostics.     

Superior Electrochemical Properties of Nanofibers Composed of Hollow CoFe2O4 Nanospheres Covered with Onion‐Like Graphitic Carbon

Nanofibers composed of hollow CoFe₂O₄ nanospheres covered with onion‐like carbon are prepared by applying nanoscale Kirkendall diffusion to the electrospinning process. Amorphous carbon nanofibers embedded with CoFe₂@onion‐like carbon nanospheres are prepared by reduction of the electrospun nanofibers. Oxidation of the CoFe₂‐C nanofibers at 300 °C under a normal atmosphere produces porous nanofibers composed of hollow CoFe₂O₄ nanospheres covered with onion‐like carbon. CoFe₂ nanocrystals are transformed into the hollow CoFe₂O₄ nanospheres during oxidation through a well‐known nanoscale Kirkendall diffusion process. The discharge capacities of the carbon‐free CoFe₂O₄ nanofibers composed of hollow nanospheres and the nanofibers composed of hollow CoFe₂O₄ nanospheres covered with onion‐like carbon are 340 and 930 mA h g^?1, respectively, for the 1000th cycle at a current density of 1 A g^?1. The nanofibers composed of hollow CoFe₂O₄ nanospheres covered with onion‐like carbon exhibit an excellent rate performance even in the absence of conductive materials.     

Tandem magnetization and post‐synthetic metal ion exchange of metal–organic framework: Synthesis,characterization and catalytic study

For the first time, metal‐exchange in a magnetic metal–organic framework (MOF) via tandem magnetization and post‐synthetic modification has been developed. The new magnetic mixed‐metal metal–organic framework nanocomposite, CoFe₂O₄/[Cu_0.63/Zn_0.37‐TMU‐17‐NH₂] (CoFe₂O₄/[Cu/Zn‐MOF]) has been synthesized by immersing the CoFe₂O₄/Zn‐TMU‐17‐NH₂ (CoFe₂O₄/Zn‐MOF) as a template in DMF solution of Cu (II) salts. CoFe₂O₄/[Cu/Zn‐MOF] showed to be a highly reactive and easily recoverable magnetic catalyst for the preparation of tetrazole derivatives via one‐pot three‐component reactions of different aldehydes with hydroxyl amine hydrochloride and sodium azide. Our results (Fourier transform‐infrared, inductively coupled plasma‐optical emission spectroscopy, powder X‐ray diffraction, field emission‐scanning electron microscopy, energy‐dispersive X‐ray spectroscopy‐mapping and vibrating‐sample magnetometer) show successful partial metal‐exchange in which the framework integrity remained intact during the metal‐exchange process.     

Preparation of hybrid fluorescent-magnetic nanoparticles for application to cellular imaging by self-assembly

A unique fluorescent-magnetic hybrid bimodal nanocomposite was prepared by the layer-by-layer self-assembly (LbL) technique fabrication of water-soluble conjugated polymers (CPs) onto the CoFe₂O₄@SiO₂ core-shell nanoparticles (NPs). First, magnetic CoFe₂O₄ nanoparticles were prepared as the magnetic core and coated with a SiO₂ shell to obtain a good dispersion in aqueous solution. Then the polyelectrolytes and cationic conjugated polymer PFV was assembled onto the surface of core-shell nanoparticles by the LbL technique. The prepared nanocomposites were magnetically responsive and fluorescent, simultaneously. Finally, the biomacromolecule heparin sodium (HS) was then assembled on the outer layer of the nanocomposite to provide a cytocompatible surface. The nanocomposites show monodispersity, good fluorescence and good biocompatibility that are useful for efficient cellular imaging. Moreover, the colloidal stability and the cellular uptake ability of the nanocomposition with HS layer were efficiently improved.     

Dispersion of magnetic nanoparticles in a polymorphic liquid crystal

In order to enhance the phase stability of dispersions of magnetic nanoparticles (NPs) in a polymorphic liquid crystal, new ligands have been designed consisting of a terphenyl-based liquid crystalline core. The most stable dispersions were obtained with 7 nm super-paramagnetic Fe₃O₄ NPs decorated with the new ligands in place of 10 nm ferromagnetic CoFe₂O₄ spherical NPs.     

Inactivation of Escherichia coli on Immobilized CuO/CoFe2O4‐TiO2 Thin‐Film under Simulated Sunlight Irradiation

Composite photocatalysts of CuO/CoFe₂O₄‐TiO₂ were successfully synthesized by a sol‐gel method and fixed on ordinary tiles. The photosterilization of Escherichia coli was examined on CuO/CoFe₂O₄‐TiO₂ thin films under a xenon lamp irradiation. The film was characterized by XRD, and the morphology was observed by SEM. Disinfection data indicated that CuO/CoFe₂O₄‐TiO₂ composite photocatalysts have the much better photocatalytic activity than CuO/CoFe₂O₄ and TiO₂. The optimized composition of the nanocomposites has been found to be m_CuO/CoFe2O4:m_TiO2=3:7, with loadings ranging from 790 to 1400 mg/m². The photocatalytic inactivated rate of E. coli (10⁵ CFU/mL) reached 98.4% under the xenon lamp of 150 W within 30 min.     

Green and rapid synthesis of dihydropyrimido [4,5‐b]quinolinetrione derivatives using CoFe2O4@PPA as high efficient solid acidic catalyst under ultrasonic irradiation

A new high efficient and green protocol for the preparation of dihydropyrimido[4,5‐b]quinolinetrione derivatives using magnetically solid acid catalyst was presented. High performance solid acid catalyst was prepared through a three‐step reaction. Firstly, CoFe₂O₄ nano particles were synthesized using co‐precipitation method. In second step, CoFe₂O₄ nano particles were coated with SiO₂ shell through treatment with tetraethyl orthosilicate (CoFe₂O₄@SiO₂). Finaly, CoFe₂O₄@SiO₂ was modified with polyphosphoric acid (CoFe₂O₄@SiO₂/PPA) in a simple manner. Green reusable catalyst was characterized in details using FTIR, VSM, TEM, FESEM, EDX and used as catalyst for the synthesis of dihydropyrimido[4,5‐b]quinolinetrione derivatives. Reaction was performed under ultrasonic irradiation as green, effective and mild conditions and products were achieved in high to excellent yields. Green and eco‐friendly conditions, short reaction times with high yield of products in addition to easy workup are some merits of presented method.     

Wintersweet‐Flower‐Like CoFe2O4/MWCNTs Hybrid Material for High‐Capacity Reversible Lithium Storage

CoFe₂O₄/multiwalled carbon nanotubes (MWCNTs) hybrid materials were synthesized by a hydrothermal method. Field emission scanning electron microscopy and transmission electron microscopy analysis confirmed the morphology of the as‐prepared hybrid material resembling wintersweet flower “buds on branches”, in which CoFe₂O₄ nanoclusters, consisting of nanocrystals with a size of 5–10 nm, are anchored along carbon nanotubes. When applied as an anode material in lithium ion batteries, the CoFe₂O₄/MWCNTs hybrid material exhibited a high performance for reversible lithium storage. In particular, the hybrid anode material delivered reversible lithium storage capacities of 809, 765, 539, and 359 mA h g^?1 at current densities of 180, 450, 900, and 1800 mA g^?1, respectively. The superior performance of CoFe₂O₄/MWCNTs hybrid materials could be ascribed to the synergistic pinning effect of the wintersweet‐flower‐like nanoarchitecture. This strategy could also be applied to synthesize other metal oxide/CNTs hybrid materials as high‐capacity anode materials for lithium ion batteries.     

Olefins oxidation with molecular O2 in the presence of chiral Mn (III) salen complex supported on magnetic CoFe2O4@SiO2@CPTMS

In the present study, CoFe₂O₄@SiO₂@CPTMS nanocomposite was synthesized and the homogeneous chiral Mn‐salen complex was anchored covalently onto the surface of CoFe₂O₄@SiO₂@CPTMS nanocomposite. The heterogeneous Mn‐salen magnetic nanocatalyst (CoFe₂O₄@SiO₂@CPTMS@ chiral Mn (III) Complex) was characterized by different techniques including transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). Then, the aerobic enantioselective oxidation of olefins to the corresponding epoxide was investigated in the presence of magnetic chiral CoFe₂O₄@SiO₂@Mn (III) complex at ambient conditions within 90 min. The results showed the corresponding products were synthesized with excellent yields and selectivity. In addition, the heterogeneous CoFe₂O₄@SiO₂@ CPTMS@ chiral Mn (III) complex has benefits such as high selectivity and comparable catalytic reactivity with its homogeneous analog as well as mild reaction condition, facile recovery, and recycling of the heterogeneous catalyst.     

Synthesis and electrochemical investigation of spinel cobalt ferrite magnetic nanoparticles for supercapacitor application

Cobalt ferrite magnetic nanoparticles (CoFe₂O₄-MNPs) were synthesized by hydrothermal and co-precipitation methods using different precursors such as nitrates, chlorides, and acetates, at different concentrations with/without surfactant under different growth conditions. The structural and morphological analyses reveal the formation of a single-phase CoFe₂O₄ in nanoplatelet-shaped NPs with average particle size between 11 and 26 nm depending on synthesis condition. The specific surface area of these NPs obtained by hydrothermal method was ~ 34 m² g^?1. Electrochemical performances of the obtained nanoparticles in a three-electrode configuration with a 6 M KOH electrolyte revealed a specific capacitance (C _s) of 429 F/g at 0.5 A/g, with excellent capacitance retention of 98.8% after 6000 cycles at 10 A/g for the electro-active NPs synthesized by hydrothermal method at 200 °C for 18 h.     

CoFe2O4 nano-particles functionalized with 8-hydroxyquinoline for dispersive solid-phase micro-extraction and direct fluorometric monitoring of aluminum in human serum and water samples

A simple dispersive solid-phase micro-extraction method based on CoFe₂O₄ nano-particles (NPs) functionalized with 8-hydroxyquinoline (8-HQ) with the aid of sodium dodecyl sulfate (SDS) was developed for separation of Al(III) ions from aqueous solutions. Al(III) ions are separated at pH 7 via complex formation with 8-HQ using the functionalized CoFe₂O₄ nano-particles sol solution as a dispersed solid-phase extractor. The separated analyte is directly quantified by a spectrofluorometric method at 370 nm excitation and 506 nm emission wavelengths. A comparison of the fluorescence of Al(III)–8-HQ complex in bulk solution and that of Al(III) ion interacted with 8-HQ/SDS/CoFe₂O₄ NPs revealed a nearly 5-fold improvement in intensity. The experimental factors influencing the separation and in situ monitoring of the analyte were optimized. Under these conditions, the calibration graph was linear in the range of 0.1–300 ng mL⁻¹ with a correlation coefficient of 0.9986. The limit of detection and limit of quantification were 0.03 ng mL⁻¹ and 0.10 ng mL⁻¹, respectively. The inter-day and intra-day relative standard deviations for six replicate determinations of 150 ng mL⁻¹ Al(III) ion were 2.8% and 1.7%, respectively. The method was successfully applied to direct determine Al(III) ion in various human serum and water samples.     

Preparation of novel magnetic fluorescent microspheres from copperas and fluorescence enhancement with zinc ions

The aim of this study is to develop a new method for the preparation of Fe₃O₄@SiO₂–An NPs from copperas. The core–shell structures of the nanoparticles and chemical composition have been confirmed by TEM, XRD and FTIR techniques. Fluorescence Enhancement of Fe₃O₄@SiO₂–An NPs with zinc ions was investigated by fluorescence emission spectra. The results indicated that the Fe₃O₄ NPs with a high purity (Total Fe 72.16 %) were obtained from copperas by chemical co-precipitation method and have a uniform spherical morphology with an average diameter of about 10 nm. The Fe₃O₄ NPs coated with silica nanoparticles were prepared, and an attempt had been made that the Fe₃O₄@SiO₂ NPs were modified by 3-aminopropyltriethoxysilane and 9-anthranone successively. The recommended mole ratio of ethanol to water and the content of ammonia water added were 4:1 and 25 wt% respectively, which have an obviously effect on the combination of the final well-ordered MNPs with the amino functionalities and reactant components. The functionalized Fe₃O₄@SiO₂–An NPs have a fluorescence property and this fluorescence effect can be enhanced with the Zn²⁺ ions attachment. Meanwhile, the saturated magnetization of Fe₃O₄@SiO₂–An NPs was 37.8 emug^?1 at 25 °C and this fluorescent material exhibited excellent magnetic properties. A new way was therefore provided for the comprehensive utilization of the unmarketable copperas. Moreover, the functionalized Fe₃O₄@SiO₂–An NPs have a big potential in environmental decontamination, medical technology and biological science.     

A Facile Approach to Fabricate Water‐soluble Au‐Fe3O4 Nanoparticle for Liver Cancer Cells Imaging

Au‐Fe₃O₄ nanoparticles were widely used as nanoplatforms for biologic applications through readily further functionalization. Dopamine (DA)‐coated superparamagnetic iron oxide (SPIO) nanoparticles (DA@Fe₃O₄) have been successfully synthesized using a one‐step process by modified coprecipitation method. Then 2–3 nm gold nanoparticles were easily conjugated to DA@Fe₃O₄ nanoparticles by the electrostatic force between gold nanoparticles and amino groups of dopamine to afford water‐soluble Au‐Fe₃O₄ hybrid nanoparticles. A detailed investigation by dynamic light scatting (DLS), transmission electron microscopy (TEM), fourier transform infrared (FT‐IR) and X‐ray diffraction (XRD) were performed in order to characterize the physicochemical properties of the hybrid nanoparticles. The hybrid nanoparticles were easily functionalized with a targeted small peptide A54 (AGKGTPSLETTP) and fluorescence probe fluorescein isothiocyanate (FITC) for liver cancer cell BEL‐7402 imaging. This simple approach to prepare hybrid nanoparticles provides a facile nanoplatform for muti‐functional derivations and may be extended to the immobilization of other metals or bimolecular on SPIO surface.     

Synthesis of Co/MFe2O4 (M=Fe, Mn) core/shell nanocomposite particles

Monodispersed cobalt nanoparticles (NPs) with controllable size (8–14 nm) have been synthesized using thermal decomposition of dicobaltoctacarbonyl in organic solvent. The as-synthesized high magnetic moment (125 emu/g) Co NPs are dispersible in various organic solvents, and can be easily transferred into aqueous phase by surface modification using phospholipids. However, the modified hydrophilic Co NPs are not stable as they are quickly oxidized, agglomerated in buffer. Co NPs are stabilized by coating the MFe₂O₄ (M=Fe, Mn) ferrite shell. Core/shell structured bimagnetic Co/MFe₂O₄ nanocomposites are prepared with tunable shell thickness (1–5 nm). The Co/MFe₂O₄ nanocomposites retain the high magnetic moment density from the Co core, while gaining chemical and magnetic stability from the ferrite shell. Compared to Co NPs, the nanocomposites show much enhanced stability in buffer solution at elevated temperatures, making them promising for biomedical applications.     

Flexible Magnetic Nanoparticles–Reduced Graphene Oxide Composite Membranes Formed by Self‐Assembly in Solution

A facile and robust route for the pre‐synthesized Fe₃O₄ nanoparticles (NPs) exclusively assembled on both sides of reduced graphene oxide (RGO) sheets with tunable density forming two‐dimensional NPs composite membranes is developed in solution. The assembly is driven by electrostatic attraction, and the nanocomposite sheets display considerable mechanical robustness, such as it can sustain supersonic and solvothermal treatments without NPs falling off, also, can freely float in solution and curl into a tube. The obtained two‐dimensional composite grain membranes exhibit superparamagnetic behavior at room temperature but responds astutely to an external magnetic field. In addition, these magnetic composite membranes show an enhanced absorption capability for microwaves. The grain sheets are attractive for biomedical, sensors, environmental applications and electric‐magnetic devices benefited from large surfaces, high magnetization moment, and superparamagnetic properties. The effective integration of oxide nanocrystals on RGO sheets provides a new way to design semiconductor–carbon nanocomposites for nanodevices or catalytic applications.     

Efficient removal of organic pollutant by activation of persulfate with magnetic Co3O4/CoFe2O4 composite

In this study, magnetic spinel Co₃O₄/CoFe₂O₄ composite were synthesized by the mechanical mixing of both powdered pristine samples. Then the catalyst was characterized by TEM, SEM, XRD, BET, XPS and VSM measurement. Next, Co₃O₄/CoFe₂O₄ composite was applied to degrade rhodamine B (RhB) in water by activating persulfate. Results showed that Co₃O₄/CoFe₂O₄ composite exhibited high efficiency for removal of RhB, and 95.59% of it could be degraded in 45 min. Besides, the effects of parameters, such as initial pH, PS dosage, Co₃O₄/CoFe₂O₄ composite dosage, initial concentration of RhB and temperture were studied. Also, the effects of coexisting anions on RhB degradation were observed and explained. Furthermore, we conducted the quenching experiment and found that sulfate radical and hydroxyl radicals were the main active radicals in the degradation process. Finally, recycle experiments proved that Co₃O₄/CoFe₂O₄ had a good stability for RhB degradation. In short, Co₃O₄/CoFe₂O₄ composite is a promising catalyst for wastewater treatment.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.