Self‐Assembling Nanoparticles at Surfaces and Interfaces

Nanoparticles are the focus of much attention due to their astonishing properties and numerous possibilities for applications in nanotechnology. For realising versatile functions, assembly of nanoparticles in regular patterns on surfaces and at interfaces is required. Assembling nanoparticles generates new nanostructures, which have unforeseen collective, intrinsic physical properties. These properties can be exploited for multipurpose applications in nanoelectronics, spintronics, sensors, etc. This review surveys different techniques, currently employed and being developed, for assembling nanoparticles in to ordered nanostructures. In this endeavour, the principles and methods involved in the development of assemblies are discussed. Subsequently, different possibilities of nanoparticle‐based nanostructures, obtained in multi‐dimensions, are presented.     

Evaporation‐Induced Ordered Honeycomb Structures of Gold Nanoparticles at the Air/Water Interface

The breath figure method was used to prepare dodecanethiol‐capped gold nanoparticle macroporous structures with pore diameters from 1.7 to 3.5 μm on an air/water interface. A two‐step procedure is proposed for the fabrication of these macroporous structures, by forming a surfactant monolayer on water, and drop‐casting a gold nanoparticle dispersion in chloroform onto the surfactant monolayer. The self‐assembled films are easily transferred from the water surface onto different substrates and were characterized by TEM, SEM, and AFM. Ordered honeycomb structures with different pore arrays (perforated monolayer films, hexagonal networks and alveoli‐like porous films) were obtained. The change in morphology is concentration dependent, and deformed structures with elliptic honeycomb networks are also observed. In addition, honeycomb films using gold nanoparticles stabilized by a weakly bound ligand (dioctadecyldimethylammonium chloride) were formed by the same technique. These films have potential as substrates for surface‐enhanced Raman spectroscopy.     

Colloidal Microcapsules: Self‐Assembly of Nanoparticles at the Liquid–Liquid Interface

Colloidal microcapsules (MCs) are highly modular, inherently multiscale constructs of capsules stabilized by nano‐/microparticle shells, with applications in many areas of materials and biological sciences, such as drug delivery, encapsulation, and microreactors. Until recently, fabrication of colloidal MCs focused on the use of submicron‐sized particles because the smaller nanoparticles (NPs) are inherently unstable at the interface owing to thermal disorder. However, stable microcapsules can now be obtained by tuning the interactions between the nanometer‐sized building blocks at the liquid–liquid interface. This Review highlights recent developments in the fabrication of colloidal MCs using NPs.     

Dynamic Self‐Assembly of Gold/Polymer Nanocomposites: pH‐Encoded Switching between 1D Nanowires and 3D Nanosponges

The design of tunable dynamic self‐assembly of nanoparticles with switchable assembled dimensions and morphologies is a challenging goal whose realization is vital for the evolution of smart nanomaterials. Herein, we report on chitosan polymer as an effective supramolecular “glue” for aldehyde‐modified Au nanoparticles to reversibly modulate the states of self‐assembled nanocomposites. By simultaneous integration of dynamic covalent Schiff base interactions and noncovalent hydrogen bonds, the chitosan/Au nanocomposites could reversibly transform their assembled morphologies from one‐dimensional nanowires to three‐dimensional nanosponges in response to the variation of pH value. Moreover, the obtained nanosponges could be used as an efficient pH‐controlled cargo release system.     

Self‐Assembly Studies of a Chiral Bisurea‐Based Superhydrogelator

A chiral bisurea‐based superhydrogelator that is capable of forming supramolecular hydrogels at concentrations as low as 0.2 mM is reported. This soft material has been characterized by thermal studies, rheology, X‐ray diffraction analysis, transmission electron microscopy (TEM), and by various spectroscopic techniques (electronic and vibrational circular dichroism and by FTIR and Raman spectroscopy). The expression of chirality on the molecular and supramolecular levels has been studied and a clear amplification of its chirality into the achiral analogue has been observed. Furthermore, thermal analysis showed that the hydrogelation of compound 1 has a high response to temperature, which corresponds to an enthalpy‐driven self‐assembly process. These particular thermal characteristics make these materials easy to handle for soft‐application technologies.     

A Chiral Recognition System Orchestrated by Self‐Assembly: Molecular Chirality,Self‐Assembly Morphology,and Fluorescence Response

The newly developed oligophenylenevinylene (OPV)‐based fluorescent (FL) chiral chemosensor (OPV‐Me) for the representative enantiomeric guest, 1,2‐cyclohexanedicarboxylic acid (1,2‐CHDA: RR ‐ and SS ‐form) showed the high chiral discrimination ability, resulting in the different aggregation modes of OPV‐Me self‐assembly: RR ‐CHDA directed the fibrous supramolecular aggregate, whereas SS ‐CHDA directed the finite aggregate. The consequent FL intensity toward RR ‐CHDA was up to 30 times larger than that toward SS ‐CHDA. Accordingly, highly enantioselective recognition was achieved. Application to the chirality sensing was also possible: OPV‐Me exhibited a linear relationship between the FL intensity and the enantiomeric excess through the morphological development of stereocomplex aggregates. These results clearly show that the chiral recognition ability is manifested by the amplification cascade of the chirality difference through self‐assembly.     

Metallopolymer–Peptide Hybrid Materials: Synthesis and Self‐Assembly of Functional,Polyferrocenylsilane–Tetrapeptide Conjugates

Conjugates of poly(ferrocenyldimethylsilane) (PFDMS) with Ac‐(GA)₂‐OH, Ac‐A₄‐OH, Ac‐G₄‐OH and Ac‐V₄‐OH have been prepared by reaction of the tetrapeptide units with the amino‐terminated metallopolymer. The number average degree of polymerisation (DP_n) of the PFDMS was approximately 20 and comparable materials with shorter (DP_n≈10) and/or amorphous chains have been prepared by the same procedure. Poly(ferrocenylethylmethylsilane) (PFEMS) was employed for the latter purpose. All conjugates were characterised by GPC, MALDI‐TOF MS, NMR and IR spectroscopy. With the exception of Ac‐V₄‐PFDMS₂₀, all materials exhibited some anti‐parallel β‐sheet structure in the solid state. The self‐assembly of the conjugates was studied in toluene by DLS. The vast majority of the materials, irrespective of peptide sequence or chain crystallinity, afforded fibres consisting of a peptidic core surrounded by a PFS corona. These fibres were found in the form of cross‐linked networks by TEM and AFM. The accessibility of the chemically reducing PFS corona has been demonstrated by the localised formation of silver nanoparticles on the surface of the fibres.     

Self‐Assembly of Proteins: Towards Supramolecular Materials

The study of protein self‐assembly has attracted great interest over the decades, due to the important role that proteins play in life. In contrast to the major achievements that have been made in the fields of DNA origami, RNA, and synthetic peptides, methods for the design of self‐assembling proteins have progressed more slowly. This Concept article provides a brief overview of studies on native protein and artificial scaffold assemblies and highlights advances in designing self‐assembling proteins. The discussions are focused on design strategies for self‐assembling proteins, including protein fusion, chemical conjugation, supramolecular, and computational‐aided de novo design.     

Magnifying the Structural Components of Biomembranes: A Prototype for the Study of the Self‐Assembly of Giant Lipids

How biomembranes are self‐organized to perform their functions remains a pivotal issue in biological and chemical science. Understanding the self‐assembly principles of lipid‐like molecules hence becomes crucial. Herein, we report the mesostructural evolution of amphiphilic sphere‐rod conjugates (giant lipids), and study the roles of geometric parameters (head–tail ratio and cross‐sectional area) during this course. As a prototype system, giant lipids resemble natural lipidic molecules by capturing their essential features. The self‐assembly behavior of two categories of giant lipids (I‐shape and T‐shape, a total of 8 molecules) is demonstrated. A rich variety of mesostructures is constructed in solution state and their molecular packing models are rationally understood. Giant lipids recast the phase behavior of natural lipids to a certain degree and the abundant self‐assembled morphologies reveal distinct physiochemical behaviors when geometric parameters deviate from natural analogues.     

Metal‐Ion‐Coated Graphitic Nanotubes: Controlled Self‐Assembly of a Pyridyl‐Appended Gemini‐Shaped Hexabenzocoronene Amphiphile

The assembly line : Hexabenzocoronene amphiphiles appended with pyridyl‐terminated triethylene glycol side chains, in combination with trans‐[Pt(PhCN)₂Cl₂], lead to the formation of graphitic nanotubes. The structural features and dimensions of the nanotubes depend on the assembly conditions. A platinum(II)‐bridged cyclic dimer having two HBC units self‐assembles into a nanotubular structure.

     

Structural Diversity in the Self‐Assembly of Pseudopeptidic Macrocycles

The self‐assembling abilities of several pseudopeptidic macrocycles have been thoroughly studied both in the solid (SEM, TEM, FTIR) and in solution (NMR, UV, CD, FTIR) states. Detailed microscopy revealed large differences in the morphology of the self‐assembling micro/nanostructures depending on the macrocyclic chemical structures. Self‐assembly was triggered by the presence of additional methylene groups or by changing from para to meta geometry of the aromatic phenylene backbone moiety. More interestingly, the nature of the side chain also plays a fundamental role in some of the obtained nanostructures, thus producing structures from long fibers to hollow spheres. These nanostructures were obtained in different solvents and on different surfaces, thus implying that the chemical information for the self‐assembly is contained in the molecular structure. Dilution NMR studies (chemical shift and self‐diffusion rates) suggest the formation of incipient aggregates in solution by a combination of hydrogen‐bonding and π–π interactions, thus implicating amide and aryl groups, respectively. Electronic spectroscopy further supports the π–π interactions because the compounds that lead to fibers show large hypochromic shifts in the UV spectra. Moreover, the fiber‐forming macrocycles also showed a more intense CD signature. The hydrogen‐bonding interactions within the nanostructures were also characterized by attenuated total‐reflectance FTIR spectroscopy, which allowed us to monitor the complete transition from the solution to the dried nanostructure. Overall, we concluded that the self‐assembly of this family of pseudopeptidic macrocycles is dictated by a synergic action of hydrogen‐bonding and π–π interactions. The feasibility and geometrical disposition of these interactions finally render a hierarchical organization, which has been rationalized with a proposal of a model. The understanding of the process at the molecular level has allowed us to prepare hybrid soft materials.     

Self‐Assembled Prussian Blue Nanoparticles Based Electrochemical Sensor for High Sensitive Determination of H2O2 in Acidic Media

In this paper, self‐assembled Prussian blue nanoparticles (PBNPs) on carbon ceramic electrode (CCE) were developed as a high sensitive hydrogen peroxide (H₂O₂) electrochemical sensor. The PBNPs film was prepared by a simple dipping method. The morphology of the PBNPs‐modified CCE was characterized by scanning electron microscopy (SEM). The self‐assembled PB film exhibited sufficient mechanical, electrochemical stability and high sensitivity in compare with other PB based H₂O₂ sensors. The sensor showed a good linear response for H₂O₂ over the concentration range 1 μM–0.26 mM with a detection limit of ca. 0.7 μM (S/N=3), and sensitivity of 754.6 mA M^?1 cm^?2. This work demonstrates the feasibility of self‐assembled PBNPs‐modified CCE for practical sensing applications.