New multifunctional materials obtained by the intercalation of anionic dyes into layered zinc hydroxide nitrate followed by dispersion into poly(vinyl alcohol) (PVA)

Different anionic blue and orange dyes have been immobilized on a zinc hydroxide nitrate (Zn₅(OH)₈(NO₃)₂nH₂O — Zn–OH–NO₃) by anion exchange with interlayer and/or outer surface nitrate ions of the layered matrix. Orange G (OG) was totally intercalated, orange II (OII) was partially intercalated, while Niagara blue 3B (NB) and Evans blue (EV) were only adsorbed at the outer surface. Several composite films of poly(vinyl alcohol) — PVA were prepared by casting through the dispersion of the hybrid material (Zn–OH–OG) into a PVA aqueous solution and evaporation of water in a vacuum oven. The obtained composite films were transparent, colored, and capable of absorbing UV radiation. Improved mechanical properties were also obtained in relation to the nonfilled PVA films. These results demonstrate the onset of a new range of potential applications for layered hydroxide salts in the preparation of polymer composite multifunctional materials.     

Preparation and thermal decomposition study of pyridinedicarboxylate intercalated layered double hydroxides

Supramolecular 2,3- and 2,5-pyridinedicarboxylate (PDC) intercalated ZnAl-layered double hydroxides (2,3- and 2,5-PDC–ZnAl–LDHs) have been prepared by ion exchange method. The structure and composition of the intercalated materials have been studied by X-ray diffraction (XRD) and inductively coupled plasma emission spectroscopy (ICP). The study indicates that the 2,3-PDC and 2,5-PDC anions are accommodated as interdigitated bilayer and monolayer arrangement respectively between the sheets of LDHs. Furthermore, their thermal decomposition processes were studied by the use of in situ high temperature X-ray diffraction (HT-XRD), and the combined technique of thermogravimetry-differential thermal analysis-mass spectrometry (TG-DTA-MS) under N2 atmosphere. Based on the comparison study on the temperatures of both decarboxylation and complete decomposition of interlayer PDC, it can be concluded that 2,5-PDC–ZnAl–LDHs has higher thermal stability than that of 2,3-PDC–ZnAl–LDHs.     

Study of assembly of arachidic acid/LDHs hybrid films containing photoactive dyes

Hybrid monolayers formed with an floating arachidic acid (AA) anions monolayer binding with a densely packed layered double hydroxides (LDHs) monolayer at an air/LDHs suspension interface has been studied by pi-A isotherms and TEM images. An ordered multilayer film of AA/LDHs has been fabricated by Langmuir-Blodgett technique on various substrates. The photoactive dyes (methyl orange, MO, and Congo red, CR) can be incorporated into the galleries of LDHs in the AA/LDHs hybrid LB film by an ion intercalation method. The results of FTIR and UV-vis absorption spectra can approve the formation of AA/LDHs/dyes composite films. In addition, UV-vis absorption spectra and LAXRD analyses also provide evidence for the good vertical uniformity and stable layered periodic structure of AA/LDHs/dyes films. More interestingly, it was found that the dye molecules intercalated can be induced by a positively charged LDHs sheet to align in a special orientation and form different aggregates: MO molecules form sandwich H-type aggregates, while CR molecules form head-to-tail J-type aggregates. On the basis of these data, a possible model of the AA/LDHs/dyes composite films was proposed. Also, the dye molecules incorporated into AA/LDHs films exhibit excellent configuration stability under the irradiation of UV light because the LDHs matrix offers a more rigid and constrained environment for them.     

Synthesis of heptamolybdate‐intercalated MgAl LDHs and its application in polyurethane elastomer

Heptamolybdate (Mo₇O₂₄^6?) was intercalated in the interlayer space between MgAl‐layered double hydroxides (Mo‐MgAl LDHs) by the hydrothermal and ion exchange method, and then polyurethane elastomer (PUE) based composites were prepared by the prepolymerization method with different amounts of Mo‐MgAl LDHs. X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, laser Raman spectroscopy (LRS), and scanning electron microscopy (SEM) were employed to characterize the obtained LDHs. The performance of the PUE/LDHs were evaluated by measuring their thermal gravimetric, heat release rate (HRR), and smoke density (Ds). The results show that PUE/LDH composites exhibit a lower peak heat release rate (pk‐HRR), Ds, and a prolonged combustion time, in comparison with neat PUE. Comparison between NO₃‐MgAl LDHs and Mo‐MgAl LDHs containing composites show that the introduction of Mo⁶⁺ is able to facilitate flame retardance and smoke suppression efficiency, which results mainly from the presence of MoO₃ derived from the decomposition of Mo₇O₂₄^6? intercalated LDHs. Mo‐MgAl LDHs reduce the pk‐HRR of composites by 39% with only 1 wt.% content, and the maximum Ds of composites is reduced to a minimal value of 274 with 10 wt.% Mo‐MgAl LDHs. More importantly, LDHs would improve the mechanical properties at a low content. The experimental results reveal the potential of Mo₇O₂₄^6? intercalated LDHs to improve both the flame retardancy and smoke suppression of PUE. Copyright © 2015 John Wiley & Sons, Ltd.     

二元类水滑石层板组成、结构与性能的理论研究

采用晶体学理论建立二元类水滑石(LDHs)微观结构模型与静电势能模型，将层板金属离子间距、层板电荷密度、层间阴离子间距等微观结构参数定量化，并将层间阴离子的静电势能表示成层板金属离子半径和物质的量之比、插层阴离子尺寸和电荷的函数。研究结果表明：LDHs层板金属离子间距应用离子紧密堆积来估算和孔径按阴离子平面六方点阵分布来计算是可行的；调变层板金属离子种类与物质的量之比影响层间阴离子的稳定性，势能计算值与文献报道的LDHs热稳定性次序一致。所以该模型可用于预测LDHs的微观结构参数以及热稳定性，为新型层状双羟基材料的定向合成提供思路。     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

Synthesis and Characterization of Poly(ethylene terephthalate)/Modified Lithium‐Aluminum‐Layered Double Hydroxide Nanocomposites Prepared Using In‐situ Polymerization

Layered double hydroxides are a type of layered stacked compound, which can be intercalated with organic‐molecule modifiers. An ion‐exchange process for layered double hydroxide (LDH) was used to intercalate water‐soluble sulfanilic acid salt (SAS) and dimethyl 5‐sulfoisopthalate (DMSI) into lithium aluminum layered double hydroxides (LiAl LDHs). In this work, a hydrothermal process was used to modify LiAl LDHs, and the modified LiAl LDHs were treated with either SAS or DMSI through an ion‐exchange process and were then intercalated using bis‐hydroxyethylene terephthalate (BHET). The results indicate that the modified LiAl LDHs improved the interlayer compatibility between the PET and LiAl LDH layers; thus, enabling the oligomer molecules to more easily enter the gallery of the LiAl LDH layers so that polymer chains could be included between the LDH layers during polymerization of the matrix. The better barrier, mechanical properties, and thermal stability of these new types of PET nanocomposites are discussed.     

Mg–Al layered double hydroxide intercalated with sodium lauryl sulfate as a sorbent for <Superscript>152+154</Superscript>Eu from aqueous solutions

In the present study, Mg–Al layered double hydroxide intercalated with nitrate anions (LDH-NO₃) was synthesized, modified with the anionic surfactant, sodium lauryl sulfate, and applied for the removal of ^152+154Eu from aqueous solutions. Modification of the as-synthesized Mg–Al layered double hydroxide was carried out at surfactant concentration of 0.01 M (the organo-LDH produced denoted LDH-NaLS). The as-synthesized and surfactant-intercalated LDHs were characterized by FT-IR and energy-dispersive X-ray spectroscopy techniques. The effect of some variables such as solution pH, contact time and sorbate concentration on removal of ^152+154Eu was investigated. The kinetic data obtained were well fitted by the pseudo-second-order kinetic model rather than the pseudo-first-order model. Intraparticle diffusion model showed that sorption of ^152+154Eu proceed by intraparticle diffusion together with boundary layer diffusion. Experimental isotherm data were well described by Langmuir model. Organo-LDH was found to have higher capacity (156.45 mg g⁻¹) for europium than the as-synthesized LDH-NO₃ (119.56 mg g⁻¹). Comparing LDHs capacities obtained for Eu(III) in the present work with other sorbents reported in literature indicated that LDHs have the highest capacities. Application of the developed process for removal of ^152+154Eu(III) from radioactive process wastewaters was also studied and the obtained results revealed that these LDHs are promising materials for treatment of radioactive wastewaters.     

Preparation,characterization, and thermal studies of γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and CuO dispersed polycarbonate nanocomposites

Polycarbonate with γ-Fe₂O₃ and CuO dispersions were carried out by solvent casting method to make polycarbonate-γ-Fe₂O₃ and polycarbonate-CuO composite films. These films were characterized for the molecular structure through FTIR spectroscopy and crystallinity by X-ray diffraction (XRD) measurements. The morphology of polycarbonate-γ-Fe₂O₃ was found to be different from that of polycarbonate-CuO composite films based on the scanning electron micrograph (SEM) images. The thermal traces of composites are different from that of pure polycarbonate which indicating the catalytic decomposition when compared with virgin polymer which is oxidative decomposition. An understanding of the structure, morphology, and thermal behaviour of the composite films are envisaged in the present study.     

Characterization of layered double hydroxide Mg-Al-CO<Subscript>3</Subscript> prepared by re-hydration of Mg-Al mixed oxide

Emanation thermal analysis, differential thermal analysis, thermogravimetry, X-ray diffraction, scanning electron microscopy (SEM) and surface area and porosity determination from nitrogen adsorption/desorption measurements were used to characterize the Mg-Al-CO₃ LDH compound with the Mg:Al ratio 3:1 prepared by re-hydration of the Mg-Al mixed oxide. The mixed oxide was obtained after heating of the intial Mg-Al-CO₃ LDH compound in air at 500°C for 2 h. The samples were re-hydrated by two ways namely in a distilled water at 20°C for 5 days or by moistening at 60°C in air with RH 80% during 10 days, respectively. The characteristics of the re-hydrated LDH samples were compared with the initial Mg-Al-CO₃ compound. The influence of the re-hydration conditions on the microstructure, surface morphology and thermal stability of the regenerated Mg-Al-CO₃ LDHs samples is discussed. It was demonstrated that the re-generation of the layered structure by the hydration of the mixed oxide in water or in air, respectively, took place via the dissolution-crystallization mechanism and that the layered double hydroxide with different surface area and thermal behavior were formed after re-hydration in water or humid air, respectively. The emanation thermal analysis revealed differences in the microstructure changes of the re-hydrated sample during heating. XRD patterns and results of the methods used supported the ETA results.     

Preparation,characterization, structure‐property relationships,and thermal degradation kinetics of poly (lactic acid)/amidated potassium hydrogen phthalate intercalated layered double hydroxides nanocomposites

A novel nucleating agent, amidated potassium hydrogen phthalate intercalated layered double hydroxides (AP‐LDHs) were prepared using an amidation reaction. Through the structural characterization, it was found that AP‐LDHs had been successfully prepared. Meanwhile, the antibacterial activity of AP‐LDHs was studied. In order to improve the performance of poly (lactic acid) (PLA), PLA/AP‐LDHs nanocomposites were prepared by melt blending. Morphological analysis showed that PLA nanocomposites had an exfoliated structure. Mechanical properties test showed that the mechanical properties of PLA nanocomposites were enhanced. And the fracture scanning electron microscope analysis indicated that the PLA/AP‐LDHs nanocomposites exhibited ductile fracture characteristics. Moreover, differential scanning calorimetry and polarized optical microscopy analysis results demonstrated that the crystallization rate, nucleation density, and crystallinity of PLA/AP‐LDHs were improved. Thermogravimetric analysis and thermal degradation kinetics showed that the thermal stability of the PLA nanocomposites was significantly improved.     

Layered double hydroxides intercalated with borate anions: Fire and thermal properties in ethylene vinyl acetate copolymer

Fire and thermal properties of ethylene vinyl acetate (EVA) composites prepared by melt blending with layered double hydroxides (LDH) have been studied. Two types of LDHs intercalated with borate anion were prepared using the coprecipitation method and the metals Mg²⁺, Zn²⁺ and Al³⁺. Characterization of the LDHs and the EVA composites was performed using X-ray diffraction, thermogravimetric analysis, and cone calorimetry. Thermal analyses show that the addition of LDHs improves the thermal stability of EVA. Fire properties evaluated using the cone calorimeter were significantly improved in the EVA/LDH composites. The peak heat release rate was reduced by about 40% when only 3% by weight of the LDH was added to the copolymer. Comparison of the fire properties of the LDHs with those of aluminum trihydrate (ATH), magnesium hydroxides (MDH), zinc hydroxide (ZH) and their combinations at 40% loading, reveal that the LDHs were more effective than when MDH and ZH are used alone.     

Calorimetric investigations of luminescent films polycarbonate (PC) doped with europium complex [Eu(TTA)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

Polymers doped with rare earth complexes are advantaged in film production for many applications in the luminescent field. In this luminescent polycarbonate (PC) films doped with diaquatris(thenoyltrifluoroacetonate)europium(III) complex [Eu(TTA)₃(H₂O)₂] were prepared and their calorimetric and luminescent properties in the solid state are reported. The thermal behavior was investigated by utilization of differential scanning calorimetry (DSC) and thermogravimetry (TG). Due of the addition of rare earth [Eu(TTA)₃(H₂O)₂] into PC matrix, changes were observed in the thermal behavior concerning the glass transition and thermal stability. Characteristic broadened narrow bands arising from the ⁵D₀ → ⁷F_J transitions (J = 4−0) of Eu³⁺ ion indicate the incorporation of the Eu³⁺ ions in the polymer. The luminescent films show enhancement emission intensity with an increase of rare earth concentration in polymeric matrix accompanied by decrease in thermal stability.     

Preparation of Co–Al and Ni–Al layered double hydroxide thin films by a sol–gel process with hot water treatment

Using hot water treatment of sol–gel derived precursor gel films, Co–Al and Ni–Al layered double hydroxide (LDH) thin films were prepared. The precursor gel films of Al₂O₃–CoO or Al₂O₃–NiO were prepared from cobalt or nickel nitrates and aluminum tri-sec-butoxide using the sol–gel method. Then, the precursor gel films were immersed in a NaOH aqueous solution of 100 °C. Nanocrystallites of Co–Al and Ni–Al LDH were precipitated with the hot water treatment with NaOH solution. The largest amounts of nanocrystals were obtained with a solution of pH = 10 for Co–Al LDH, and with that of pH = 9 for Ni–Al LDH. X-ray diffraction measurements confirmed that this process formed CO₃ ²⁻ intercalated LDHs. Both Co–Al and Ni–Al LDH thin films were confirmed to work as electrodes for electrochemical devices by cyclic voltammogram measurements.     

Importance of the interlayer orientation in borate-intercalating layered double hydroxides

Thermal decomposition kinetics and mechanism of layered double hydroxides (LDHs) intercalating different amounts and types of borate ions were studied using Coats–Redfern integral and Achar differential methods. The results revealed that the Coats–Redfern integral method is more appropriate than the Achar differential method for evaluation of the nonisothermal thermogravimetric decomposition data. The first-order Avrami-Erofe’ev A₁ mechanism was found to be the best fitting kinetic model for almost all samples. In addition to the amount and type of the intercalated borate ion, interlayer orientation was also of importance in determining the chemical and thermal stabilities and hence the decomposition kinetics of the studied compounds.     

A magnetic organic-inorganic composite: Synthesis and characterization of magnetic 5-aminosalicylic acid intercalated layered double hydroxides

A core-shell structured magnetic layered organic-inorganic material involving 5-aminosalicylic acid (5-ASA) intercalated Zn-Al layered double hydroxides (LDHs) and magnesium ferrite (MgFe₂O₄) is assembled by a coprecipitation method. The powder X-ray diffraction results show the coexistence of the clear but weak diffractions of MgFe₂O₄ and ordered relatively stronger reflections of 5-ASA intercalated LDHs. The TEM image of magnetic 5-ASA intercalated LDHs reveals that the LDHs layer covers the MgFe₂O₄ particles or their aggregates with particle size of 50-80 nm. The vibration sample magnetization (VSM) measurements exhibit the increase in saturation magnetization of magnetic 5-ASA intercalated LDHs samples with increasing amount of magnetic core. The XPS analyses account for a majority of Zn, Al and O atoms on the surface of magnetic particles. It is suggested that the magnetic core MgFe₂O₄ was coated with LDHs layer probably through Zn-O-Mg and Al-O-Mg linkages, and a core-shell structured model is tentatively proposed.     

Fabrication and properties of MgF<Subscript>2</Subscript> composite film modified with carbon nanotubes

Carbon nanotubes (CNTs) were used to modify magnesium fluoride (MgF₂) film via the spin coating technique. Nanoparticles of MgF₂ were in situ synthesized on surfaces of CNTs resulted in the composites (MgF₂–CNTs) by means of sol–gel technique. The sizes of the MgF₂ nanoparticles in situ synthesized on CNTs surfaces could be modulated by processing the MgF₂ sol–gel in different ways. The MgF₂–CNTs as prepared was mixed with MgF₂ sol to fabricate composite films (MgF₂–CNTs/MgF₂). Instead of adding directly CNTs, adding MgF₂–CNTs, into MgF₂ sol could effectively improve the dispersion of CNTs, avoid emergence of carbon clusters in the compsite film, decrease surface roughness of the film, and enhance the interaction between the CNTs and MgF₂ matrix. In the paper, the MgF₂ nanoparticles were in situ synthesized on the surfaces of multi-walled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs) respectively to prepare MgF₂–SWCNTs/MgF₂ and MgF₂–MWCNTs/MgF₂ composite films. Experimental results showed that the transparency of the MgF₂–SWCNTs/MgF₂ composite film was higher than that of the MgF₂–MWCNTs/MgF₂ film in the range of ultraviolet, visible and near-infrared wavelengths. The results showed SWCNTS could be an ideal reinforcement of MgF₂ films to get good toughness, and retain its optical transmittance at the same time.     

ZnO nanorods decorated calcined Mg–Al layered double hydroxides as photocatalysts with a high adsorptive capacity

The nanocomposites of magnesium–aluminium–carbonate–layered double hydroxides (Mg–Al–CO₃–LDHs) and ZnO nanorods were prepared via a homogeneous precipitation process. The presence of ZnO nanorods made the calcined Mg–Al–CO₃–LDHs, the strong adsorptive adsorbents for anions, have a photocatalytic activity. Both Mg–Al–CO₃–LDHs and the nanocomposites with various ZnO/Mg–Al–CO₃–LDHs mass ratios from 0.5:1 to 3:1 were characterized by X-ray diffraction, transmission electron microscope and UV–vis diffuse reflectance spectra. The nanocomposites quickly adsorbed the anionic dyes such as acid red G (ARG) without the light illumination, and the adsorbed dyes on the recovered nanocomposites were then degraded in a separated photocatalytic reactor. The adsorption ability of the nanocomposites and their photocatalytic activities for the removal of ARG were evaluated by the Fourier transform infrared spectra and UV–vis extinction spectra. The sample at 3:1 ZnO/Mg–Al–CO₃–LDHs mass ratio was shown to have higher photocatalytic efficiencies.     

Stable UV absorption material synthesized by intercalation of squaric acid anion into layered double hydroxides

A novel UV absorption material of squaric acid (SA) anion (O₄O₄^2?) intercalated layered double hydroxides (LDHs) was successfully synthesized by the co-precipitation method. After intercalation, the interlayer distance of MgAl-SA-LDHs increased to 1.04 nm compared to those of MgAl-CO₃-LDHs and SA anions present in form of a monolayer in the interlayer of LDHs. Thermal stability of SA clearly enhanced by the intercalation and the suppression of the deintercalation ability of MgAl-SA-LDHs was superior to that of 4-hydroxy-3-methoxybenzoic acid intercalated LDHs. The results of UV-DRS indicate the potential application of MgAl-SA-LDHs as UV absorbers.     

酸性黄25插层水滑石薄膜的制备及其性能研究

采用原位生长法在铝片基底表面制备了ZnAl-NO3-LDHs水滑石薄膜,以其为前驱体,在弱酸性条件下通过离子交换反应将酸性黄25阴离子插层至ZnAl-LDHs/Al薄膜层间,制备了酸性黄25插层水滑石薄膜,并采用XRD、SEM、FTIR、TG-DTA、UV-Vis和色差计等手段对薄膜进行了表征。XRD和FTIR表征结果表明,酸性黄25阴离子成功地插层到了水滑石薄膜层间,ZnAl-LDHs的层间距由0.87 nm增加到2.96 nm,NO3-阴离子在1 384 cm-1处的特征吸收峰消失,同时出现了酸性黄25阴离子的特征吸收峰。SEM照片显示,水滑石晶片主要以c轴平行于铝片基底生长。TG-DTA分析、UV-Vis分析、色差分析和紫外光老化结果表明,插层后酸性黄25阴离子的耐热性和耐光性均得到了提高。