单向声传播结构研究

受到电子二极管整流效应的启发,对单向声传播结构展开了一系列的理论与实验研究：将超晶格结构与非线性声学材料组合构成了可实现声整流效应的声二极管结构;通过将反对称弹性结构引入到复合结构板来产生Lamb波的不对称模式转化,设计了可实现Lamb波单向传播的线性声学结构;基于声子晶体的部分禁带特性,在有限尺度声学系统中设计并实现了单向声学波导结构;设计并实现了由纯板与声栅构成的声单向传播结构,具有小尺寸与高效率的特点,且声波出射角度可调;基于声学梯度材料设计了可在极宽频带内实现不对称声传播的声学结构。     

旋转对二维正方晶格介质柱内空结构光子晶体禁带的影响

采用平面波展开的方法计算了三种旋转操作下二维正方晶格各向异性材料(Te)介质柱内空结构光子晶体TE,TM模式能带.讨论了三种旋转操作对TE,TM模式带隙及完全光子禁带的影响.发现TM模式高频带隙与结构的旋转对称性有着密切的关系.而TE模式的带隙不仅受到晶体旋转对称性的影响同时也受到介质在x-y平面分布情况的影响.     

一种具有大带隙的各向异性二维光子晶体结构

提出一种新型各向异性材料(碲)二维光子晶体结构,应用有限时域差分法,对该结构特性进行数值分析,结果表明:通过优化结构参量,该结构具有较大的绝对光子禁带,禁带宽度为0.064ω_e(ω_e=2πc/a,a为晶格常量,c为光速),且该光子晶体的带隙具有很好的稳定性.     

In掺杂ZnO电子结构的第一性原理研究

采用第一性原理平面波超软赝势,计算了纤锌矿ZnO和不同掺杂量下In掺杂ZnO晶体的能带结构、态密度和分波态密度.计算表明,In的掺杂导致ZnO禁带宽度变窄.随着掺杂量的增大,In_xZn_1－xO的导带底和价带顶同时下降,但是导带底比价带顶下降得多,这导致了带隙的变窄.此外,In掺杂使晶胞晶格常数增大,这对带隙的变窄也有一定作用.     

两耦合半无限超晶格中的局域界面声子-极化激元

采用转移矩阵方法，研究了含结构缺陷层的两耦合半无限超晶格(GaAs/AlAs)中的局域界面声子-极化激元模性质. 研究发现，含不同介电特性的缺陷超晶格结构中的局域界面声子-极化激元模在剩余射线区［ω_TO, ω_LO］的分布情况与数量存在不同，而且反对称模表现出不同的特征. 文中着重研究了缺陷层介电常数与角频率无关的缺陷超晶格，发现该结构中的局域界面声子-极化激元模对组分层的排列顺序与厚度、缺陷层的厚度以及横向波数有着不同程度的依赖.     

三元硅化物CaAlSi的结构和超导电性

应用线性响应的线性糕模轨道方法计算AlB₂型结构的新超导体CaAlSi的电子能带、声子谱及电子-声子耦合常数，并讨论了它们的超导电性.通过比较两种结构模型的计算结果可以看出：若CaAlSi中Al，Si原子沿c轴方向以—Al—Al—Al—(或—Si—Si—Si—) 排列，低频B_1g模式的声子频率沿A-L方向出现虚频, 使得这种结构处于不稳定状态，电子-声子耦合表现异常增大；若Al，Si原子沿c轴     

二元衍射光栅式偏光器件的设计

本文利用双折射晶体刻划成的二元衍射光栅的衍射偏振特性,设计了偏光器件(可分别对o光或e光起偏);偏光分束器件(包括非对称及对称偏振分束两类),并对有关参数对设计的影响进行了讨论.     

新型功能材料——声子晶体

声子晶体是20世纪90年代初提出的一种新型声学功能材料，这种周期性弹性结构具有许多重要性质，如声波带隙特性，即处于禁带频率范围内的振动或声波将被禁止在晶体中传播。通过求解声波在晶体中的运动方程可以设计一定的声子禁带和允带，而声子禁带与声波异质结构中声子的安德森局域化问题密切相关。文章重点阐述了声子晶体的主要特征、理论研究方法、潜在应用及前景展望。     

新型二维压电声子晶体板带隙可调性研究

设计了一种由涂有硬质材料涂层的柱状压电散射体周期性连接在四个环氧树脂薄板上构成的具有大带宽的新型二维压电声子晶体板,并利用有限元方法计算了该声子晶体板的能带结构、传输损失谱和位移矢量场.研究表明：与二组元材料构成的传统声子晶体板相比,新设计的声子晶体板的第一完全带隙频率更低,并且带宽扩大了5倍;通过在压电体表面上施加不同的电边界条件,可以实现多条完全带隙的主动调控;压电效应对能带结构有很大的影响,并且有利于完全带隙的扩大与形成.基于带隙的可调谐性,分析了可切换路径的压电声子晶体板波导,结果表明可以通过改变电边界条件来限制弹性波能量流.     

二维声子晶体带结构的多散射分析及解耦模式

利用多散射方法研究了二维声子晶体中的带结构，通过对柱散射波各阶分波之间的耦合分析，发现在带隙边缘的模式存在与对称性相关的解耦现象. 由此在低阶带隙边缘出现独立的自洽的零阶多散射模式. 通过引入周期结构因子和Mie散射因子，得到表征低阶带隙起始频率的解析公式. 利用该公式，采用图解法，定量地说明了带隙起始频率随周期性和单散射体Mie散射特性变化的规律. 关键词： 声子晶体 多散射     

Propagation characteristics of the laser-generated lower-order lamb waves in one-dimensional periodic thin plates

Using the finite element method (FEM), we study the thermoelastic generation and the transmitted power spectra (TPS) of Laser-generated lower-order Lamb wave mode in an one-dimensional thin aluminum plate engraved by a periodic rectangular grating. The calculation verified that the equally good Lamb waves band gaps can also exist in an one-component periodic structure and the width and location of the band gaps can be regulated by the parameters of the depth of the grooves (h), the ratio of the lattice period to the plate thickness (D/L) and the ratio of the width of the grooves to the lattice period (d/D). Specially, we suggest that Lamb wave band gaps can be substantially enlarged by using multiple periodic systems which consist of several pieces of periodic structure with different D/L.     

Lamb waves in phononic crystal slabs: truncated plane parallels to the axis of periodicity

A theoretical study is presented on the propagation properties of Lamb wave modes in phononic crystal slabs consisting of a row or more of parallel square cylinders placed periodically in the host material. The surfaces of the slabs are parallel to the axis of periodicity. The dispersion curves of Lamb wave modes are calculated based on the supercell method. The finite element method is employed to calculate the band structures and the transmission power spectra, which are in good agreement with the results by the supercell method. We also have found that the dispersion curves of Lamb waves are strongly dependent on the crystal termination, which is the position of the cut plane through the square cylinders. There exist complete or incomplete (truncated) layers of square cylinders with the change of the crystal termination. The influence of the crystal termination on the band gaps of Lamb wave modes is analyzed by numerical simulations. The variation of the crystal termination leads to obvious changes in the dispersion curves of the Lamb waves and the widths of the band gaps.     

Propagation of guided elastic waves in 2D phononic crystals

The phononic band structure of two-dimensional phononic guides is numerically studied. A plane wave expansion method is used to calculate the dispersion relations of guided elastic waves in these periodic media, including 2D phononic plates and thin layered periodic arrangements. We show that, for any guided elastic wave, Lamb or generalised Lamb modes, stop bands appear in the dispersion curves, displaying a phononic band structure in both cases.     

Investigation of a silicon-based one-dimensional phononic crystal plate via the super-cell plane wave expansion method

The super-cell plane wave expansion method is employed to calculate band structures for the design of a silicon-based one-dimensional phononic crystal plate with large absolute forbidden bands. In this method, a low impedance medium is introduced to replace the free stress boundary, which largely reduces the computational complexity. The dependence of band gaps on structural parameters is investigated in detail. To prove the validity of the super-cell plane wave expansion, the transmitted power spectra of the Lamb wave are calculated by using a finite element method. With the detailed computation, the band-gap of a one-dimensional plate can be designed as required with appropriate structural parameters, which provides a guide to the fabrication of a Lamb wave phononic crystal.     

Symmetric and Anti-Symmetric Lamb Waves in a Two-Dimensional Phononic Crystal Plate

It is weft known that Lamb waves in a plate with a mirror plane can be separated into two uncoupled sets： symmetric and anti-symmetric modes. Based on this property, we present a revised plane wave expansion method （PWE） to calculate the band structure of a phononie crystal （PC） plate with a mirror plane. The developed PWE method can be used to calculate the band structure of symmetric and anti-symmetric modes separately, by which the depending relationship between the partial acoustic band gap （PABG）, which belongs to the symmetric and anti-symmetric modes alternatively, and the position of the scatterers can be determined. As an example of its application, the band structure of the Lamb modes in a two-dimensional PC plate with two layers of void circular inclusions is investigated. The results show that the band structure for the symmetric and anti-symmetric modes can be changed by the position of the scatterers drastically, and larger PABGs will be opened when the scatterers are inserted into the area of the plate, where the elastic potential energy is concentrated.     

Focusing and waveguiding of Lamb waves in micro-fabricated piezoelectric phononic plates

This paper presents results on the numerical and experimental studies of focusing and waveguiding of the lowest anti-symmetric Lamb wave in micro-fabricated piezoelectric phononic plates. The phononic structure was based on an AT-cut quartz plate and consisted of a gradient-index phononic crystal (GRIN PC) lens and a linear phononic plate waveguide. The band structures of the square-latticed AT-cut quartz phononic crystal plates with different filling ratios were analyzed using the finite element method. The design of a GRIN PC plate lens which is attached with a linear phononic plate waveguide is proposed. In designing the waveguide, propagation modes in square-latticed PC plates with different waveguide widths were studied and the results were served for the experimental design. In the micro-fabrication, deep reactive ion etching (Deep-RIE) process with a laboratory-made etcher was utilized to fabricate both the GRIN PC plate lens and the linear phononic waveguide on an 80 μm thick AT-cut quartz plate. Interdigital transducers were fabricated directly on the quartz plate to generate the lowest anti-symmetric Lamb waves. A vibro-meter was used to detect the wave fields and the measured results on the focusing and waveguiding of the piezoelectric GRIN PC lens and waveguide are in good accordance with the numerical predictions. The results of this study may serve as a basis for developing an active micro plate lens and related devices.     

Large Lamb wave band gap in phononic crystals thin plates

We suggest that Lamb wave band gaps in one-dimensional phononic crystals can be substantially enlarged by using multiple heterostructures which consist of several pieces of phononic crystal with different ratios of the thickness to the lattice period. This is possible because each substructure shows a different band gap and the band structure of a Lamb wave is strongly affected by the ratio of the plate thickness to the lattice period. This effect has been demonstrated by using finite element simulations on two different one-dimensional systems. PACS 63.20.-e; 62.65.+k; 41.20.Jb; 43.20.+g     

兰姆波检测信号的匹配追踪时频分析

为有效去除兰姆波检测信号中的冗余信息和识别多个模态,应用匹配追踪方法对兰姆波信号进行处理。在Chirplet原子基础上添加弯曲算子进行改进,以更好地匹配频散和多模式兰姆波信号的特征。由改进的Chirplet原子组成过完备字典,使用基于遗传算法的匹配追踪(GAMP)信号稀疏分解方法,从过完备字典中选出与待分析信号相匹配的最佳原子,利用最佳匹配原子和对应的分解系数进行信号重构和时频分析。研究结果表明,改进后的Chirplet原子更能反映出兰姆波信号的非线性时频变化特征,得到的时频分布与频散曲线的弯曲特性能很好的吻合。采用改进后的Chirplet原子匹配追踪方法可以获取更加精确的走时信息,为后续兰姆波损伤定位成像奠定基础。      

Large complete band gap in two-dimensional phononic crystal slabs with elliptic inclusions

Phononic band structure with periodic elliptic inclusions for the square lattice is investigated based on the plane wave expansion method. The numerical results show the systems composed of tungsten (W) elliptic rods embedded in a silicon (Si) matrix can exhibit a larger complete band gap than the conventional circular phononic crystal (PC) slabs. The phononic band structure of the plate-mode waves and the width of the first complete band gap can be tuned by varying the ratio of the minor axis and the major axis, the orientation angle of the elliptic rods and the thickness of the PC slabs. We also study the band structure of plate-mode waves propagating in two-dimensional (2D) slabs with periodic elliptic inclusions coated on uniform substrate.     

基于频散补偿和分数阶微分的多模式兰姆波分离

由于兰姆波的多模和频散特性,实际检测时在同一激发频率下存在多种模式的混合信号,而各模式信号有不同的频散特性,使得在时频混叠的情况下兰姆波的检测变得十分复杂.本文在频散补偿的基础上,通过时延函数建模,依靠不同模式频散趋势的差异性,将时频混叠信号的分离问题转化为部分模式混叠信号的分离问题.基于分数阶微分的理论,用信号幅值谱分数阶微分极大值和对应频率分别与微分阶次拟合多项式实现特征参数的提取并依靠特征参数重建幅值谱.结合相位谱重构时域信号以实现部分混叠信号中频散补偿后的模式的分离.最后恢复频散获得分离后的兰姆波信号.仿真和实验结果表明,本文方法不仅可以实现时频混叠多模式兰姆波信号的分离,更能保证分离精度,有助于复杂多模式频散信号的分离与处理的进一步研究.