MoFe3S4单立方烷原子簇研究II. MoFe3S4(C5H10NCSS)5的合成与结构

六氢吡啶基二硫代甲酸钠盐、氯化亚铁及四硫代钼酸铵在二甲基甲酰胺及二氯甲烷中,经一步自兜反应,分别得到了[MoFe3S4(C5H10NCSS)5]DMF及[MoFe3S4(C5H10NCSS)5]CH2Cl2.通过X射线衍射测定了后者的晶体结构,比较了它与[MoFe3S4(Et2NCSS)5]^-结构特点的异同,同时研究了反应物摩尔比对产物的影响以及溶剂分子的置换反应.     

MoFe3S4单立方烷原子簇研究 III: 三核链状簇合物向单立方烷簇合物的转化及MoFe3S4(Et2NCS2)5.CH3CN的结构

以Fe(DMF)6[(FeCl2)2MoS4]与Et2NCS2Na在DMF中反应实现了三核链状簇骼向单立方烷簇骼的转化, 得到了MoFe3S4(Et2NCS2)5并测定了它的晶体结构. 本文指出与配体有关的氧化还原过程及配体的配位特点对这一转化反应及其产物的影响, 同时比较了由于核心氧化态的差异而造成的簇骼结构面貌的变化.     

MoFe3S4单立方烷原子簇研究 IV:新型的双跨桥六配体单立方烷簇合物MoFe3S4(μ-Me2NCS2)2(Me2NCS2)4.2CH3CN的合成与结构

在二甲胺基二硫代甲酸钠、氯化亚铁及四硫代钼酸铵的自兜反应体系中, 以分步结晶法分离出MeFe3S4(Me2NCS2)5.CH2Cl2及MoFe3S1(Me2NCS2)6.2CH3CN等单立方烷簇合物, 并测定了后者的结构. 它的分子含两个Me2NCS2并具有最高核心氧化态[MoFe3S4]^6^+. 本文报道该化合物的结构特点, 指出在自兜反应体系中, 可能存在几种不同氧化态的单立方烷原子簇化合物.     

MoFe_3S_4单立方烷自兜合成及(Et_4 N)(MoFe_3S(Et_2dtc)_5]·MeCN的晶体结构

<正> 具有MoFe_3S_4单立方烷簇骼的化合物与固氮酶的钼铁蛋白及铁钼辅基存在着某些类似性,从而引起人们的极大注意。1973年卢嘉锡提出的固氮酶活性中心模型—福州模型(Ⅰ)—就具有网兜状缺口MoFe_3S_3单立方烷结构。迄今,还没有见到用简单化合物一步合成,即所谓自兜(Spontaneous self-assembly)合成单立方烷的报导。     

Synthesis and structure of the organometallic MFe2(mu3-S)2 clusters (M = Mo or Fe)

New organometallic clusters with the MFe2(mu3-S)2 core (M = Mo or Fe) have been synthesized from inorganic [MoFe3S4] or [Fe4S4] clusters under high pressure CO. The reaction of (Cl4-cat)2Mo2Fe6S8(PR3)6[R = Et, (n)Pr] with high pressure CO produced the crystalline [MoFe2S2]4+ clusters, (Cl4-cat)Mo(O)Fe2S2(CO)(n)(PR3)6-n[n= 4, Et =I, (n)Pr =II; n = 5, Et =III] after flash column chromatography. The similar [MoFe2S2]4+ cluster, (Cl4-cat)2MoFe2S2(CO)2(depe)(2)(IV), also has been achieved by the reactions of (Cl4-cat)MoFe3S3(CO)6(PEt3)2 with depe by reductive decoupling of the cluster. For the [Fe3(mu3-S)2]4+ cluster, [Fe4S4(PcHex3)4](BPh4) was reacted with high pressure CO to produce a new Fe3S2(CO)7(PcHex)(2)(V) compound. These reactions generalized the preparation of organometallic compounds from inorganic clusters. All the compounds have been characterized by single crystal X-ray crystallography. A possible reaction pathway for the synthesis of the MFe2(mu3-S) clusters (M = Mo or Fe) has also been suggested.     

含有环己巯基配体的钨簇合物的合成及晶体结构研究

C6H11Na, Et4NBF4, FeCl2, (NH4)2WS4在20mL CH3OH溶剂的反应中, 标题簇合物(Et4N)3[W2Fe6S8(SC6H11)6(OCH3)3]被分离得到, 对其进行X-ray 单晶衍射和结构解析。 该化合物属正交晶系,空间群 Pmmn, 晶胞参数 a = 17.370(5), b = 15.986(4), c = 17.858(3), V = 4958.6(6)3, Z = 2,C63H135N3O3S14Fe6W2, Mr = 2134.47, Dc = 1.43g/cm3, F(000) = 2172.0, m(MoKa) = 3.49 mm-1, T = 293(2)K。 采用2966个I > 2.0s (I) 的衍射点对所有非氢原子参数进行结构修正。 得到最后的偏离因子为R = 0.072, Rw = 0.091。 这是一个双类立方烷的结构, 2个单类立方烷的端基金属钨原子通过3个甲氧基桥联。 [WFe3S4] 与 [MoFe3S4]簇核结构比较说明, 两者存在一定的相似性。     

铁铂硫原子簇化合物的合成与结构研究 V: [MoFe3S4]类立方烷簇合物的转化反应和[Et4N]3[Mo2Fe6S8(SC6H4CH3-m)3Cl6]的晶体结构

具[MoFe2S4]类立方烷结构单元的双类立方烷化合物[Et4N]4[Mo2Fe7S8(SR)12](1a,R=Ph; 1b, R=tolyl-m)或单类立方烷化合物[MoFe3S4(dteR2)5](2a, R=Me; 2b, R=Et)与酰氯在乙腈中反应, 分别得到不含Fe桥的双类立方烷化合物(Et4N)3[Mo2Fe6S8(SR)3Cl6](3a, R=Ph; 3b, R=toly-m)与[MoFe3S4]骨架支解后的Fe(dteR2)2Cl(4a, R=Me; 4b, R=Et)。说明在相同反应条件下, [MoFe3S4]单元在1中比在2中稳定, 本文首次将1型与3型结构通过一步化学反应连系起来。3型化合物的产生得到X射线衍射测定及^1H NMR谱的证实。本文报道3b的单晶结构及3的^!H NMR数据, 3b属六方晶系, P63/m, a=1.6827(3), c=1.5951(16)nm; V=3.91158nm^3; Dc=1.491g/cm^3;Z=2; F(000)=1780; 偏离因子R=0.048, 化合物2与酰氯反应产生4, 由红外及紫外可见光谱证实。     

Structural Features and Interrelation of Two New Trinuclear Mo－S Cluster Compounds

ＳｔｒｕｃｔｕｒａｌＦｅａｔｕｒｅｓａｎｄＩｎｔｅｒｒｅｌａｔｉｏｎｏｆＴｗｏＮｅｗＴｒｉｎｕｃｌｅａｒＭｏ－ＳＣｌｕｓｔｅｒＣｏｍｐｏｕｎｄｓＬｕＳｈａｏ－Ｆａｎｇ；ＷｕＱｉａｎｇ－Ｊｉｎ；ＣｈｅｎＨｏｎｇ－Ｂｉｎｇ；ＹｕＲｏｎｇ－Ｍｉｎ；Ｈｕａｎ...     

Molybdenum-iron-sulfur clusters of nuclearities eight and sixteen, including a topological analogue of the P-cluster of nitrogenase

Transformations of the edge-bridged double cubane cluster [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4] (1) under reducing conditions have been investigated as synthetic approaches to the clusters of nitrogenase. Cluster 1 is a versatile precursor to different Mo-Fe-S cluster types. The reaction system 1/K(C14H10) in THF yields the reduced cluster [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4]1- (2), which as its crystalline Et4N+ salt retains the edge-bridged structure of 1. X-ray structural and M?ssbauer spectroscopic results indicate an unsymmetrical electron distribution with localized [MoFe3S4]2+,1+ cubane-type units. The system 1/2K(C14H10)/2HS- in THF/acetonitrile affords [(Cl4cat)4(Et3P)4Mo4Fe12S20K3(DMF)]5- (3), whose structure was determined as the Ph3PMe+ salt. The cluster consists of two isostructural Mo2Fe6S9 fragments connected by two mu 2-S bridges. Three potassium ions are bound between the two fragments. In each fragment, the iron atoms are present in tetrahedral FeS4 and the molybdenum atoms in octahedral MoO2PS3 coordination units, and two MoFe3(mu 3-S)3 cuboidal units are bridged by a common mu 6-S atom. The fragments have idealized mirror symmetry and are isostructural with two of the fragments present in the previously reported high-nuclearity cluster [(Cl4cat)6(Et3P)6Mo6Fe20S30]8- (4) (Osterloh, F.; Sanakis, Y.; Staples, R. J.; Münck, E.; Holm, R. H. Angew. Chem., Int. Ed. Engl. 1999, 38, 2066). On the basis of overall shape, atom connectivities, and metric features, the Mo2Fe6S9 fragment is a topological analogue of the P-cluster of nitrogenase in the PN (reduced) state. A third cluster type, formed as a minor byproduct in the reaction system leading to 2, was crystallographically identified as [(Cl4cat)2(Et3P)2Mo2Fe6S8(PEt3)4]4-, whose core is made up of two MoFe3(mu 3-S)3 cuboidal units bridged by two mu 2-S atoms and connected by a direct Fe-Fe bond. Full structural details and the redox properties of 2 and 3 are reported.     

Addition products of a P(III)-isothiocyanate to dialkyl acetylenedicarboxylates: a spirocyclic phosphinimine and a triphosphorus heterocycle with tetra- and penta-coordinate phosphorus

Treatment of the P(III) isothiocyanate CH2[6-t-Bu-4-Me-C6H2O]2PNCS (1) with dimethyl acetylenedicarboxylate (DMAD) or diethyl acetylenedicarboxylate (DEAD) yields the spirocyclic phosphinimines CH2[6-t-Bu-4-Me-C6H2O]2P[NC(S)C(CO2R)C(CO2R)][R=Me (2), Et (3)], in a reaction unlike those of organic isocyanates. From the reaction of 1 with DEAD, a second product, the triphosphorus compound 5, with the composition [2x1+3] but with a completely reorganized structure {CH2[6-t-Bu-4-Me-C6H2O]2P=C(CO2Et)C(CO2Et)=CN-}{CH2[6-t-Bu-4-Me-C6H2O]2P(NCS)}-SC=N-P(S)[(OC6H2-6-t-Bu-4-Me)2CH2] with tetra- and penta-coordinate phosphorus, is also isolated. Structure and reactivity of these compounds are discussed. Addition of 2,2,2-trifluoroethanol to 2 or 3 leads to the pentacoordinate phosphorus compounds [CH2(6-t-Bu-4-Me-C6H2O)2P(OCH2CF3){C(CO2R)C(CO2R)-C(S)-NH-}][R=Me (6), Et (7)]. The phosphonate [CH2(6-t-Bu-4-Me-C6H2O)2P(O)C(CO2Et)=C(CO2Et)-C(S)-NH2] (8) is obtained by evaporating a solution of 7 in open air.     

Synthesis and characterization of sulfur-voided cubanes. Structural analogues for the MoFe(3)S(3) subunit in the nitrogenase cofactor.

A new class of Mo/Fe/S clusters with the MoFe(3)S(3) core has been synthesized in attempts to model the FeMo-cofactor in nitrogenase. These clusters are obtained in reactions of the (Cl(4)-cat)(2)Mo(2)Fe(6)S(8)(PR(3))(6) [R = Et (I), (n)Pr (II)] clusters with CO. The new clusters include those preliminarily reported: (Cl(4)-cat)MoFe(3)S(3)(PEt(3))(2)(CO)(6) (III), (Cl(4)-cat)(O)MoFe(3)S(3)(PEt(3))(3)(CO)(5) (IV), (Cl(4)-cat)(Pyr)MoFe(3)S(3)(PEt(3))(2)(CO)(6) (VI), and (Cl(4)-cat)(Pyr)MoFe(3)S(3)(P(n)Pr(3))(3)(CO)(4) (VIII). In addition the new (Cl(4)-cat)(O)MoFe(3)S(3)(P(n)Pr(3))(3)(CO)(5) cluster (IVa), the (Cl(4)-cat)(O)MoFe(3)S(3)(PEt(3))(2)(CO)(6)cluster (V), the (Cl(4)-cat)(O)MoFe(3)S(3)(P(n)Pr(3))(2)(CO)(6) cluster (Va), the (Cl(4)-cat)(Pyr)MoFe(3)S(3)(P(n)Pr(3))(2)(CO)(6) cluster (VIa), and the (Cl(4)-cat)(P(n)Pr(3))MoFe(3)S(3)(P(n)Pr(3))(2)(CO)(6) cluster (VII) also are reported. Clusters III-VIII have been structurally and spectroscopically characterized. EPR, zero-field (57)Fe-M?ssbauer spectroscopic characterizations, and magnetic susceptibility measurements have been used for a tentative assignment of the electronic and oxidation states of the MoFe(3)S(3) sulfur-voided cuboidal clusters. A structural comparison of the clusters with the MoFe(3)S(3) subunit of the FeMo-cofactor has led to the suggestion that the storage of reducing equivalents into M-M bonds, and their use in the reduction of substrates, may occur with the FeMo-cofactor, which also appears to have M-M bonding. On the basis of this argument, a possible N(2)-binding and reduction mechanism on the FeMoco-cofactor is proposed.     

Double-stranded W/Ag/S chain structure generated from [syn-(WO(NCS)(2))(2)(mu-S)(2)] building blocks

The dimeric W(V) complex [Et(4)N](4)[syn-(O=W(NCS)(3))(2)(mu-S)(2)], 1, prepared from [Et(4)N](2)[WS(4)], SCN(-), and Cd(2+), shows interesting reactivity patterns in that the thiocyanate trans to the oxo group can in part be replaced, initiated by Mn(2+), by dimethylformamide (DMF) to form [Et(4)N](2.5)[(O=W(NCS)(2.25)(DMF)(1.25))(2)(mu-S)(2)], 2. With Ag(+), 1 undergoes partial replacement of SCN(-) by DMF and coordinates to the silver ions to generate ([Et(4)N](2.5)[(W(2)O(2)(NCS)(2)(mu-S)(2))(mu-NCS)(2)(DMF)(Ag(0.5)(SCN))])(n), 3. Compound 3 constitutes a polymeric double-stranded chain, with normal bonding interactions [via W-(mu-NCS)-Ag] between the two strands, and moderate intrastrand [W-(mu-NCS).Ag] bonding. The crystal and molecular structures of the three compounds are described.     

Borohydride, azide, and chloride anions as terminal ligands on Fe/Mo/S clusters. Synthesis, structure and characterization of [(Cl4-cat)(PPr3) MoFe3S4(X)2]2(Bu4N)4 and [(Cl4-cat)(PPr3)MoFe3S4 (PPr3)(X)]2(Bu4N)2 (X = N3-, BH4-, Cl-) double-fused cubanes. NMR reactivity studies of [(Cl4-cat)(PPr3) MoFe3S4(BH4)2]2(Bu4N)4

Our explorations of the reactivity of Fe/Mo/S clusters of some relevance to the FeMoco nitrogenase have led to new double-fused cubane clusters with the Mo2Fe6S8 core as derivatives of the known (Cl4-cat)2Mo2Fe6S8(PPr3)6 (I) fused double cubane. The new clusters have been obtained by substitution reactions of the PPr3 ligands with Cl-, BH4-, and N3-. By careful control of the conditions of these reactions, the clusters [(Cl4-cat)(PPr3)MoFe3S4(BH4)2]2(Bu4N)4 (II), [(Cl4-cat)(PPr3)MoFe3S4(PPr3)(BH4)]2(Bu4N)2 (III), [(Cl4-cat)(PPr3)MoFe3S4(N3)2]2(Bu4N)4 (IV), [(Cl4-cat)(PPr3)MoFe3S4(PPr3)(N3)]2(Bu4N)2 (V), and [(Cl4-cat)(PPr3)MoFe3S4Cl2]2(Et4N)4 (VI) have been obtained and structurally characterized. A study of their electrochemistry shows that the reduction potentials for the derivatives of I are shifted to more positive values than those of I, suggesting a stabilization of the reduced clusters by the anionic ligands BH4- and N3-. Using 1H NMR spectroscopy, we have explored the lability of the BH4- ligand in II in coordinating solvents and its hydridic character, which is apparent in its reactivity toward proton sources such as MeOH or PhOH.     

Crystal Structure of Complex （Et4N）[VFe3S4Cl3（CH3CN）3]

1　ＩＮＴＲＯＤＵＣＴＩＯＮＳｉｎｃｅ1980,ｍａｎｙＶ/Ｆｅ/Ｓｈｅｔｅｒｏｍｅｔａｌｌｉｃｓｕｌｆｕｒｃｌｕｓｔｅｒｃｏｍｐｏｕｎｄｓｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄ.ＲａｕｃｈｆｕｓｓｅｔａｌｏｂｔａｉｎｅｄｔｗｏｋｉｎｄｓｏｆＶ/Ｆｅ/Ｓｃｏｍｐｏｕｎｄｓ[1]ｕｓｉｎｇ(ＣＨ3Ｃ5Ｈ4)2Ｖ2Ｓ4ａｓａｎｏｒｇａｎｏｍｅｔａｌｌｉｃｌｉｇａｎｄ,ｏｎｅｉｓ(ＭｅＣｐ)2Ｖ2Ｆｅ2(ＮＯ)2Ｓ4ｗｉｔｈａｃｕｂａｎｅｌｉｋｅｓｔｒｕｃｔｕｒｅａｎｄａｎｏｔｈｅｒｉｓ(ＭｅＣｐ)2Ｖ2Ｓ4Ｆｅ(ＮＯ)2ａｎｄ(ＭｅＣｐ)2Ｖ2Ｓ4…     

Selenium-centered, undecanuclear silver cages surrounded by iodo and dialkyldiselenophosphato ligands. Syntheses, structures, and photophysical properties

Three clusters [Ag11(mu9-Se)(mu3-I)3{Se2P(OR)2}6] (R = Et, 1; iPr, 2; 2Bu, 3) were isolated from the reaction of [Ag(CH3CN)4](PF6), NH4[Se2P(OR)2], and Bu4NI in a molar ratio of 4:3:1 in CH2Cl2 in 47-55% yield. Compounds 1 and 2 can also be synthesized with high yield from the reaction of Ag10(Se)[Se2P(OR)2]8 with 8 equiv of Bu4NI. In the positive fast atom bombardment mass spectra of 1-3, two major peaks that correspond to the intact molecule with the loss of an iodide ion, [Ag11(mu9-Se)(mu3-I)(2){Se2P(OR)2}6]+, and a diselenophosphate ligand, [Ag11(mu9-Se)(mu3-I)3{Se2P(OR)2}5]+, were identified. Single-crystal X-ray analyses of 2 and 3 reveal an Ag11Se core stabilized by three iodide anions and six diselenophosphato ligands in a tetrametallic tetraconnective (mu2,mu2) coordination mode. The central core adopts the geometry of a 3,3,4,4,4-pentacapped trigonal prism with a selenium atom in the center. In addition, weak intermolecular Se...I interactions exist in 2 and form a one-dimensional polymeric chain structure. Furthermore, all compounds exhibit orange-red luminescence in both the solid state and solution.     

Hydroxide-promoted core conversions of molybdenum-iron-sulfur edge-bridged double cubanes: oxygen-ligated topological PN clusters

The occurrence of a heteroatom X (C, N, or O) in the MoFe7S9X core of the iron-molybdenum cofactor of nitrogenase has encouraged synthetic attempts to prepare high-nuclearity M-Fe-S-X clusters containing such atoms. We have previously shown that reaction of the edge-bridged double cubane [(Tp)2Mo2Fe6S8(PEt3)4] (1) with nucleophiles HQ- affords the clusters [(Tp)2Mo2Fe6S8Q(QH)2](3-) (Q = S, Se) in which HQ- is a terminal ligand and Q(2-) is a mu2-bridging atom in the core. Reactions with OH- used as such or oxygen nucleophiles generated in acetonitrile from (Bu3Sn)2O or Me3SnOH and fluoride were examined. Reaction of 1 with Et4NOH in acetonitrile/water generates [(Tp)2Mo2Fe6S9(OH)2]3- (3), isolated as [(Tp)2Mo2Fe6S9(OH)(OC(=NH)Me)(H2O)](3-) and shown to have the [Mo2Fe6(mu2-S)2(mu3-S)6(mu6-S)] core topology very similar to the P(N) cluster of nitrogenase. The reaction system 1/Et4NOH in acetonitrile/methanol yields the P(N)-type cluster [(Tp)2Mo2Fe6S9(OMe)2(H2O)](3-) (5). The system 1/Me3SnOH/F- affords the oxo-bridged double P(N)-type cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}5- (7), convertible to the oxidized cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}4- (6), which is prepared independently from [(Tp)2Mo2Fe6S9F2(H2O)](3-)/(Bu3Sn)2O. In the preparations of 3-5 and 7, hydroxide liberates sulfide from 1 leading to the formation of P(N)-type clusters. Unlike reactions with HQ-, no oxygen atoms are integrated into the core structures of the products. However, the half-dimer composition [Mo2Fe6S9O] relates to the MoFe7S9 constitution of the putative native cluster with X = O. (Tp = hydrotris(pyrazolyl) borate(1-)).     

Coordination chemistry of Group 12 metals with phosphorodiselenoates: syntheses, structures and VT 31P NMR study of monomer-dimer exchange equilibrium

The reactions of diselenophosphates, [dsep, (RO)2PSe2-; R = Et, (n)Pr and (i)Pr] with cadmium(II) and mercury(II) perchlorates in a 2 : 1 molar ratio formed compounds of stoichiometry M[Se2P(OR)2]2{M = Cd, R = Et (1), (n)Pr (2), (i)Pr (3); Hg, Et(4), (n)Pr (5), (i)Pr (6)}, and with zinc(II) perchlorates, chalcogen centered tetranuclear clusters, [Zn4(micro4-E){Se2P(OR)2}6]{E = Se, R = Et (7), (n)Pr (8), (i)Pr (9); E = O, R = Et (10), (n)Pr (11), (i)Pr (12)} were formed. All these complexes have been characterized with the help of analytical data, X-ray crystallography (1, 3, 6, 10, 11 and 12), and FAB-mass spectrometry (7-12). Compound 1 is a linear double-chain polymer, in which each pair of Cd atoms is bridged by two dsep ligands; the mercury 6 polymer has a helical chain structure, in which two Hg atoms are bridged by one dsep ligand, and the other ligand chelates the Hg atom. The chelating dsep ligands lie on either side of the helical chain. Compound 3 exists as a dimer in which two cadmium atoms are connected by two bridging dsep ligands, and each cadmium atom is further chelated by a dsep ligand. The metal atoms in 1, 3 and 6 are each coordinated by four selenium atoms in a distorted tetrahedral geometry. Clusters 10-12 have tetrahedral array of zinc atoms with an oxygen atom in the center with edge-bridging dsep ligands. Positive FAB-mass spectra support the formation of selenium-centered clusters,7-9, of which the cluster 8 was structurally confirmed earlier. The solution state behavior of compounds 1-12 has been studied by using multinuclear NMR spectroscopy. Dimer 3 in CD2Cl2 showed monomer-dimer exchange equilibrium in the temperature range 20 to -90 degrees C and the free energy of activation is calculated from the coalescence temperature as DeltaG++(223 K)= 38.5 kJ mol(-1). Polymer undergoes depolymerization in CDCl3 and exhibits monomer-dimer exchange equilibrium in the temperature range 20 to -60 degrees C.     

A Route to Organyl(trialkoxysilyl)chalcogenides and Dichalcogenides, Bis(trialkoxysilylmethyl)chalcogenides and Dichalcogenides

Reactions of organylchalcogenomagnesium halides RYMgX (in situ) (R = Me, Et, Ph; Y = S, Se, Te; X = Br, I) with (halomethyl)trialkoxysilanes X'CH₂Si(OR')3 (X' = Cl, I; R' = Me, Et) at reflux in tetrahydrofuran and the systems of tetrahydrofuran-acetonitrile 1:2, and ether-acetonitrile 1:2 are studied. These reactions are shown to lead to formation of mixtures of corresponding organyl(trialkoxysilylmethyl)chalcogenide and -dichalcogenide, bis(trialkoxysilyl methyl)chalcogenide and -dichalcogenide, as well as the contaminants 2,2,6,6-tetraalkoxy-2,6-disila-4-chalcogen-1-oxane, diorganylchalcogenide and -dichalcogenide, and other organic and organosilicon compounds. Composition of the formed mixtures debends considerably on the structure of R, nature of the chalcogen Y (S, Se, Te), and halides X and X' in the initial reagents, and reaction conditions. The most of synthesized and isolated organosilicon chalcogenides are newly obtained compounds.     

Multimetallic assemblies using piperazine-based dithiocarbamate building blocks

Treatment of cis-[RuCl2(dppm)2] (dppm = bis(diphenylphosphino)methane) with dithiocarbamates, NaS2CNR2 (R = Me, Et) and [H2NC5H10][S2CNC5H10], yields cations [Ru(S2CNR2)2(dppm)2](+) and [Ru(S2CNC5H10)2(dppm)2](+), respectively. The zwitterions S2CNC4H8NHR (R = Me, Et) react with the same metal complex in the presence of base to yield [Ru(S2CNC4H8NR)(dppm)2](+). Piperazine or 2,6-dimethylpiperazine reacts with carbon disulfide to give the zwitterionic dithiocarbamate salts H2NC4H6(R2-3,5)NCS2 (R = H; R = Me), which form the complexes [Ru(S2CNC4H6(R2-3,5)NH2)(dppm)2](2+) on reaction with cis-[RuCl2(dppm)2]. Sequential treatment of [Ru(S2CNC4H8NH2)(dppm)2](2+) with triethylamine and carbon disulfide forms the versatile metalla-dithiocarbamate complex [Ru(S2CNC4H8NCS2)(dppm)2] which reacts readily with cis-[RuCl2(dppm)2] to yield [{Ru(dppm)2}2(S2CNC4H8NCS2)]. Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with [Os(CH=CHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] (BTD = 2,1,3-benzothiadiazole), [Pd(C6H4CH2NMe2)Cl]2, [PtCl2(PEt3)2], and [NiCl2(dppp)] (dppp = 1,3-bis(diphenylphosphino)propane) results in the heterobimetallic complexes [(dppm)2Ru(S2CNC4H8NCS2)ML(n))](m+) (ML(n) = Os(CH=CHC6H4Me-4)(CO)(PPh3)2](+), m = 1; ML(n) = Pd(C,N-C6H4CH2NMe2), m = 1; ML(n) = Pt(PEt3)2, m = 2; ML(n) = Ni(dppp), m = 2). Reaction of [NiCl2(dppp)] with H2NC4H8NCS2 yields the structurally characterized compound, [Ni(S2CNC4H8NH2)(dppp)](2+), which reacts with base, CS2, and cis-[RuCl2(dppm)2] to provide an alternative route to [(dppm)2Ru(S2CNC4H8NCS2)Ni(dppp)](+). A further metalla-dithiocarbamate based on cobalt, [CpCo(S2CNC4H8NH2)(PPh3)](2+), is formed by treatment of CpCoI2(CO) with S2CNC4H8NH2 followed by PPh3. Further reaction with NEt3, CS2, and cis-[RuCl2(dppm)2] yields [(Ph3P)CpCo(S2CNC4H8NCS2)Ru(dppm)2](2+). Heterotrimetallic species of the form [{(dppm)2Ru(S2CNC4H8NCS2)}2M](2+) result from the reaction of [Ru(S2CNC4H8NCS2)(dppm)2] and M(OAc)2 (where M = Ni, Cu, Zn). Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with Co(acac)3 and LaCl3 results in the formation of the compounds [{(dppm)2Ru(S2CNC4H8NCS2)}3Co](3+) and [{(dppm)2Ru(S2CNC4H8NCS2)}3La](3+), respectively. The electrochemical behavior of selected examples is also reported.