Theoretical investigation on regioselectivity of aromatic ketones in the addition with olefin catalyzed by RuH2(CO)(PPh3)3

Ab initio method is employed to study the structures of twelve aromatic ketones at HF/3-21G, HF/6-31G and HF/6-31G* levels, respectively. A theoretical analysis is also carried out to study the regioselectivity and reactivity of aromatic ketones in the addition with olefin catalyzed by RuH₂(CO)(PPh₃)₃. The results indicate that a U shape LUMO conjugation of aromatic ketones in a plane plays an important role in regioselectivity on the cleavage of β C-H bond and is a necessary factor to success of addition with olefin, and that steric effect is an indispensable factor in forming additional ortho-product. Meanwhile, electronic effect may influence the rate of addition for the structures alike which only have different replacements in the same site of aromatic ring, such as furan, thiophene and pyrole. A possible catalytic reaction mechanism is proposed that the addition of C-H bond may be carried out by a coordination of aromatic ketones with Ru complex.     

Catalytic addition of C-H bonds to multiple bonds with the aid of ruthenium complexes

Ruthenium complexes, e.g., RuH2(CO)(PPh3)3, have been found to catalyze the direct addition of ortho carbon-hydrogen bonds of aromatic ketones to olefins and acetylenes with high efficiency and selectivity. The C-H/olefin coupling reaction is applicable to not only C-H bonds in aromatic ketones but also to those in a,b-enones and aro-matic esters. Catalytic addition of ortho carbon-hydrogen bonds of aromatic imines to olefins is found to be catalyzed by Ru3(CO)12.     

Room-temperature regioselective C-H/olefin coupling of aromatic ketones using an activated ruthenium catalyst with a carbonyl ligand and structural elucidation of key intermediates

Mechanistic studies of the ruthenium-catalyzed reaction of aromatic ketones with olefins are presented. Treatment of the original catalyst, RuH(2)(CO)(PPh(3))(3), with trimethylvinylsilane at 90 °C for 1-1.5 h afforded an activated ruthenium catalyst, Ru(o-C(6)H(4)PPh(2))(H)(CO)(PPh(3))(2), as a mixture of four geometric isomers. The activated complex showed high catalytic activity for C-H/olefin coupling, and the reaction of 2'-methylacetophenone with trimethylvinylsilane at room temperature for 48 h gave the corresponding ortho-alkylation product in 99% isolated yield. The activated catalyst was thermally robust and showed excellent catalytic activity under refluxing toluene conditions. (1)H and (31)P NMR studies of the C-H/olefin coupling at room temperature suggested that an ortho-ruthenated complex, P,P'-cis-C,H-cis-Ru(2'-(6'-MeC(6)H(4)C(O)Me))(H)(CO)(PPh(3))(2), participated in the reaction as a key intermediate. Isotope labeling studies using acetophenone-d(5) indicated that the rate-limiting step was the C-C bond formation, not the C-H bond cleavage, and that each step prior to the reductive elimination was reversible. The rate of C-H/olefin coupling was found to exhibit pseudo first-order kinetics and to show first-order dependence on the ruthenium complex concentration.     

Theoretical study of the inclusion processes of octopamine with β-cyclodextrin: PM6, ONIOM,and NBO analysis

The inclusion process involving β-cyclodextrin with octopamine (OA) was investigated by using PM6, HF/3-21G*, B3LYP/6-31G (d), WB97XD/6-31G (d) methods and several combination of ONIOM2 hybrid calculations. The obtained results clearly indicate the orientation in which the guest molecule penetrates into the hydrophobic cavity of β-CD with the aromatic ring is energetically preferred. The structures show the presence of several intermolecular hydrogen bond interactions that were studied on the basis of natural bonding orbital (NBO) analysis, employed to quantify donor–acceptor interactions between host and guest molecules. A study of these complexes in solution was carried out using the CPCM model to examine the influence of solvation on the stability of the octopamine/β-CD complex.     

Nitrous oxide as a 1,3-dipole: a theoretical study of its cycloaddition mechanism

The 1,3-dipolar cycloadditions of nitrous oxide and substituted alkynes have been studied at the B3LYP/6-31G(d,p) level. The reaction is controlled by LUMO (dipole)--HOMO (dipolarofile) and involves aromatic transition structures. The shape of the potential energy surface and the regioselectivity are not affected by the polarity of the solvents, except in the case of N2O + HC triple bond CSiH3. Different reactivity criteria including FMO coefficients product C, local softness differences Delta, magnetic susceptibility anisotropy chi(anis), and nucleus-independent chemical shifts NICS were used to predict the regioselectivity in all studied cases; the C, Delta criteria turn out to give the best results among them. The aromaticity of the transition structure is not a factor in determining the regiochemistry of the cycloaddtition reactions.     

Ab initio and DFT studies on the mechanism of the 1,3-dipolar cycloaddition reaction between nitrone and sulfonylethene chloride

The molecular mechanism for the 1,3-dipolar cycloaddition of nitrone with sulfonylethene chlorides has been studied using ab initio and DFT methods at the HF, MP2 and B3LYP levels together with the 6-31G* basis set. Relative rates, stereo and regioselectivity, have been analysed and discussed. For this cycloaddition four reactive channels associated with the formation of two pairs of diastereoisomeric regioisomers have been characterized. Analysis of the geometries of the corresponding transition structures shows that the cycloaddition takes place along a concerted but asynchronous mechanism. Activation energies as asynchronicity are dependent on the computation level. Thus, while HF calculations gave large barriers, MP2 calculations tend to underestimate them. DFT calculations gave reasonable values. These 1,3-dipolar cycloadditions present an endo stereoselectivity while the meta regioselectivity depends on the computational level. Thus, while HF and DFT calculations predict meta path, in agreement with the experimental results, MP2 calculation predict ortho regioselectivity. The frontier molecular orbitals analysis shows that the reaction is controlled by the (HOMO_dipole–LUMO_{dipolarophile}) interaction in agreement with the charge transfer analysis carried out at the transition structures. Inclusion of diffuse functions at the B3LYP/6-31+G* level increases the energy barriers about 4 kcal/mol, giving a similar endo/meta selectivity. Solvent effects have been taken into account, by means of self-consistent reaction field.     

1. 5-环辛二烯-3, 7-二炔(C~8H~4)结构和光谱性质的理论研究

采用量子化学从头算方法研究了1,5-环辛二烯-3,7-二炔(C~8H~4)的结构和光谱性质,根据等键反应分析和自然键轨道方法研究了它的稳定性、成键情况和共轭性。结果表明1,5-环辛二烯-3,7-二炔(C~8H~4)分子为平面刚性结构,可能稳定存在。分子中C≡C键与C=C键存在一定程度的共轭,可能具有芳香性。     

Conformations of dimethoxydimethylsilane: matrix isolation infrared and ab initio studies

Conformations of dimethoxydimethylsilane (DMDMS) were studied using matrix isolation infrared spectroscopy, by trapping the silane in argon and nitrogen matrixes. The matrix was deposited using both an effusive and a supersonic jet source. The effusive source was maintained at two different temperatures, viz. 298 and 433 K, during deposition to alter the conformational population of the silane. The experimental results were supported by computations performed at both the HF and B3LYP levels, using 6-31++G** basis set. Vibrational frequency calculations were carried out to assign the experimental features and also to ensure that the computed structures did indeed correspond to minima. A conformer with a G+/-G-/+ structure was found to be the ground state, while G+/-T and G+/-G+/- structures were the next higher energy conformers with energies of 1.32 and 1.48 kcal/mol, respectively. Natural bond orbital analysis was carried out at both HF/6-31++G** and B3LYP/6-31++G** level which indicated that the charge-transfer hyperconjugative interactions largely determine the conformational preferences in this molecule. This interaction appears to be smaller in DMDMS than in the corresponding carbon analogue, dimethoxypropane (DMP).     

Chelation-assisted Rh(I)-catalyzed ortho-alkylation of aromatic ketimines or ketones with olefins

Described herein is the Rh(I)-catalyzed ortho-alkylation of aromatic ketimines or ketones with olefins. This method showed high reactivity and selectivity to monoalkylation for a variety of olefins including 1-alkenes with an allylic proton, alpha,omega-dienes, and internal olefins. For a mechanistic study, H/D exchange experiments were carried out, which demonstrated that the ortho C-H bond could be easily cleaved even at the low temperature of 45 degrees C. The key step of this reaction is the formation of a stable five-membered metallacycle by a chelation-assisted ortho C-H bond activation. Furthermore, the direct ortho-alkylation of aromatic ketones with the Rh(I) complex was successfully achieved by adding 50 mol % of benzylamine as a chelation-assistant tool.     

Theoretical study on the hydrogen bonding of five-membered heteroaromatics with water

The hydrogen-bonding ability of five-membered heteroaromatic molecules containing one chalcogen and two heteroatoms with nitrogen in addition to chalcogen, respectively, have been analyzed using density functional and molecular orbital methods through adduct formation with water. The stabilization energies for all the adducts are established at B3LYP/6-31+G* and MP2/6-31+G* levels after correcting for the basis set superposition error by using the counterpoise method and also corrected for zero-point vibrational energies. A natural bond orbital analysis at B3LYP/6-31+G* level and natural energy decomposition analysis at HF/6-31+G* using MP2/6-31+G* geometries have been carried out to understand the nature of hydrogen-bonding interaction in monohydrated heterocyclic adducts. Nucleus-independent chemical shift have been evaluated to understand the correlation between hydrogen bond formation and aromaticity.     

镍催化氮杂环丁酮和丁二烯环加成反应机制的理论研究

采用密度泛函理论(DFT)方法对镍催化1-Boc-3-氮杂环丁酮和2,3-二甲基-1,3-丁二烯的环加成反应进行了理论研究. 计算结果表明, 该反应采用氧化加成机制而非实验推测的β-碳消除机制. 氧化加成机制主要由3个基元反应步骤组成, 分别为氮杂环丁酮底物中C—C(=O)键的氧化加成、 二烯顺式插入Ni—C(=O)键、 以及还原消除生成八元氮杂环产物, 其中烯烃插入是整个反应的决速步骤, 反应能垒为86.74 kJ/mol. 通过探讨烯烃分别插入到Ni—C(=O) 键和Ni—C(sp³) 键的2种反应途径分析了烯烃插入步骤的区域选择性, 得到了与实验数据基本一致的结果.     

Ab initio study of some peroxides. HOOH, CH3OOH and, CH3OOCH3

The geometries of HOOH, CH₃OOH, and CH₃OOCH₃, were optimized with different basis sets (3-21G, 6-31G^*(*) and D95^**) at different levels of theory (HF, MP2, MP4, and CI). HF/3-21G optimizations result in planar trans conformations for all three peroxides. HF/6-31G^** calculations predict skew conformations for HOOH and CH₃OOH, but a planar trans struture for CH₃OOCH₃. For the larger basis set the calculated bond lengths, especially the O-O bonds, are too short. Optimizations for HOOH including electron correlation at the MP2, MP3, MP4, CI, and CCD level improve the agreement for bond lengths and the OOH angle, but result in dihedral angles Which are too large by 3– 8°. In the case of CH₃OOCH₃, similar calculations at the MP2 and CI level predict planar trans structures instead of the experimentally observed skew conformation. On the other hand, MP4 single point calculations at MP2 optimized parameters result in a correct skew structure. For all three peroxides a computationally “economic” method, i.e., single point calculations at MP2 or MP4 level with HF/3-21G optimized parameters, result in close agreement between calculated and experimental structures.     

Theoretical Study on the Hetero-Diels-Alder Reactions between 3-Pyridinedithioesters and 1-Phenylsulfanylbutadiene

The mechanism, catalytic effect and solvent effect of the hetero-Diels-Alder reac- tions between 3-pyridinedithioesters and 1-phenylsulfanylbutadiene have been studied theoretically using density functional theory (DFT) at the B3LYP/6-31G(d) level. The results show that all of these reactions proceed in a concerted but asynchronous way. In some reactions the formation of C-S bond is prior to that of C-C bond and the opposite results are found in other reactions. The BF3 catalyst may lower the activation barriers by changing the energies of LUMO for 3-pyridine- dithioester. THF solvent has trivial influence on the potential energy surface of these reactions. With the BF3-catalyzed reactions, regioselectivity and stereoselectivity observed experimentally were predicted correctly by calculations and these results originate probably from C-H···F interaction in two transition states.     

All-trans- and t,T,t,C,t,T,t-deca-1,3,5,7,9-Pentaenes: Ab Initio Structures,Vibrational Analyses,and Some Regularities in the Series of Related Molecules

Total geometry optimization and calculation of the force constants for all-transand t,T,t,C,t,T,tdeca-1,3,5,7,9-pentaene were carried out at the ab initio, HF/6-31G level. The HF/6-31G//HF/ 6-31G force fields were modified using empirical scale factors transferred from trans-buta-1,3-diene augmented by an additional scale factor for the central formal carbon-carbon double bond coordinates (determined previously for all-trans-hexa-1,3,5-triene). The total number of scale factors was seven. The vibrational problems for both decapentaenes were solved using the respective scaled HF/6-31G//HF/6-31G force field. Infrared intensities and Raman activities were calculated from the unscaled HF/6-31G//HF/6-31G force fields. Complete assignment of all the fundamental vibrational frequencies is given. Geometrical parameters, vibrational frequencies and force constants are compared with the corresponding values of buta-1,3-diene, hexa-1,3,5-triene and octa-1,3,5,7-tetraene. Regularities in the properties of this molecular series are discussed. Special attention is given to the possibility of using the vibrational spectra for detection of distortions from the regular trans structure of these oligoenes.     

Geometric isotope effect of various intermolecular and intramolecular C-H...O hydrogen bonds, using the multicomponent molecular orbital method

The geometric isotope effect (GIE) of sp- (acetylene-water), sp(2)- (ethylene-water), and sp(3)- (methane-water) hybridized intermolecular C-H...O and C-D...O hydrogen bonds has been analyzed at the HF/6-31++G level by using the multicomponent molecular orbital method, which directly takes account of the quantum effect of proton/deuteron. In the acetylene-water case, the elongation of C-H length due to the formation of the hydrogen bond is found to be greater than that of C-D. In contrast to sp-type, the contraction of C-H length in methane-water is smaller than that of C-D. After the formation of hydrogen bonds, the C-H length itself in all complexes is longer than C-D and the H...O distance is shorter than D...O, similar to the GIE of conventional hydrogen bonds. Furthermore, the exponent (alpha) value is decreased with the formation of the hydrogen bond, which indicates the stabilization of intermolecular C-H...O hydrogen bonds as well as conventional hydrogen bonds. In addition, the geometric difference induced by the H/D isotope effect of the intramolecular C-H...O hydrogen bond shows the same tendency as that of intermolecular C-H...O. Our study clearly demonstrates that C-H...O hydrogen bonds can be categorized as typical hydrogen bonds from the viewpoint of GIE, irrespective of the hybridizing state of carbon and inter- or intramolecular hydrogen bond.     

Nonclassical carbocations as C-H hydrogen bond donors

Computed [B3LYP/6-31+G(d,p) and MP2/6-31+G(d,p)] structures and binding energies for complexes of nonclassical cations (carbonium ions) with ammonia, in the gas phase and several solvents, are described. Overall, nonclassical cations are found to be competent C-H hydrogen bond donors. The potential relevance of the C-H...N interactions holding the carbocation.amine complexes together for enzyme-catalyzed terpenoid synthesis is discussed.     

C59H3N异构体的结构与稳定性的理论研究

分别用MNDO,AM1和PM3三种半经验方法对C59HN所有1-2,1-4和1-6氢加成物C59H3N的异构体进行几何构型全优化,结合频率分析及HF/6-31G单点能计算,确定了各异构体的基态结构及其相对稳定性,计算结果表明,C59HN氢加成物的立体选择性规律与C60和C60H2的不同,最稳定异构体不是1-2加成物,而是1-4加成的6,18-或12,15-异构体,次稳定异构体为1-2加成物,三种半经验方法计算得到的两者能量差为13～15kJ/mol,N原子取代碳笼骨架C原子后,改变了碳笼氢加成物的立体选择性规律.     

Stable conformations of CH3CH2OCH2CH2OH: A comparison of theoretical methods

This article presents the results of an extensive examination of the stable conformations of CH₃CH₂OCH₂CH₂OH at various levels of theory. In particular, 41 initial conformations are optimized using the MM2 force field in BIGSTRN-3; the MINDO/3, MNDO, and AM1 Hamiltonians in AMPAC 2.2; the PM3 Hamiltonian in MOPAC 7.0; and at the HF/STO-3G and HF/3-21G levels using Gaussian 92. The optimized HF/3-21G structures are reoptimized at the HF/6-31G(d) level, and the unique structures are optimized again at the MP2 = FULL/6-31G(d) level. In addition, single-point MP2/6-31G(d) calculations are performed using the HF/6-31G(d) geometries. The goal is to determine the relative accuracy of each method and discuss their strengths and weaknesses. © 1994 by John Wiley & Sons, Inc.     

Infrared and ab initio studies on 1,2,4,5-tetrafluorobenzene clusters with methanol and 2,2,2-trifluoroethanol: presence and absence of an aromatic C-H...O hydrogen bond

The (1:1) clusters of 1,2,4,5-tetrafluorobenzene (TFB) with methanol and with 2,2,2-trifluoroethanol (TFE) were studied both experimentally and computationally. Through use of fluorescence-detected infrared spectroscopy, the (1:1) clusters were identified in supersonic jets. Intermolecular interactions in the clusters were characterized by the spectral shifts of the aromatic C-H stretching modes in the TFB moiety owing to the cluster formation. The molecular structures, stabilization energies, and vibrational frequencies of the clusters were computed at the MP2/6-31+G level. Both computational and experimental data indicate that an aromatic C-H...O hydrogen bond is present in the TFB-methanol cluster, while it is absent in the TFB-TFE cluster.     

Addition reactions of alkyl and carboxyl radicals to vinylidene fluoride

The addition reactions of alkyl radicals CF3* and CH3* and carboxyl radicals C2H5O*, C2H5OCOO*, CF3COO*, and CH3COO* to a vinylidene fluoride (VDF) molecule are studied using ab initio calculations. These radicals were selected because they are intermediate or final products of diacyl peroxides decomposition in the initiation reactions of VDF polymerization. Two combinations of methods for energetics and structure optimization are applied: QCISD/6-311G(d,p)//HF/6-31G(d) and B3LYP/6-311G+(3df, 2p)//B3LYP/6-31G(d). It is found that the formed bond length of the product, the forming bond length of the transition state, and the attack angle of the product structures are not sensitive to the level of theory even though the attack angle of the transition state structures is. Early transition states are obtained upon attack at both high-substituted and nonsubstituted carbon atom VDF ends. Kinetic and thermodynamic control rules play different roles on governing the reactivity of the addition with the studied radicals. Both theoretical methods yield the same trends for the preferential attack site in terms of regioselectivity, barrier energies, and reaction enthalpies. It is shown that the addition reactions of the intermediate radicals C2H5OCOO*, CF3COO*, and CH3COO* of the decomposition of diethyl peroxydicarbonate, trifluoroacetyl peroxide, and diacetyl peroxide initiators yield smaller energy barriers than the additions of the corresponding final radicals, C2H5O*, CF3*, and CH3*; therefore, the reactions of the intermediate radicals should not be ignored when analyzing the initiation process of the VDF polymerization using those initiators.