Etude de vanadates du vanadium(V) par analyse thermique

Résumé Nous avons étudié, par absorption infrarouge, trois séries de vanadates du V (V) et leurs produits de transformation au cours du chauffage.Les o-vanadates montrent une structure tétraèdrique simple qui se conserve jusqu'à 950° C au moins.Lesp- etm-vanadates se présentent sous deux formes de structure un peu différente, selon la température à laquelle on les porte.Les pyrovanadates et un certain nombre de métavanadates possèdent une structure formée de chaînes de tétraèdres VO₄ liés par un sommet d'oxygène.Les autres métavanadates sont constitués de chaînes de bipyramides triangulaires liées par une arête.

---

Three series of vanadates of vanadium(V) and their decomposition products, obtained by thermal treatment, were subjected to investigation by infrared adsorption spectroscopy.o-vanadates have a tetrahedral structure which they preserve up to 950°.p-and m-vanadates appear in two slightly different structures depending on the temperature.Pyrovanadates and certain m-vanadates form chains of VO₄ tetrahedra which are connected at the apex. Other m-vanadates consist of trigonal bipyramidal chains linked along an edge.

---

Zusammenfassung Drei Serien der Vanadate des Vanadium (V) und ihrer durch thermische Behandlung erhaltenen Umwandlungsprodukte wurden einer Prüfung durch infrarote Absorptionspektroskopie unterworfen.Die o-Vanadate besitzen eine tetraedrische Struktur, welche sie mindestens bis 950° C beibehalten. Die p- und m-Vanadate erscheinen je nach der Erhitzungstemperatur in zwei wenig unterschiedlichen Strukturen.Pyrovanadate und gewisse Metavanadate bilden Ketten aus VO₄ Tetraedern, verbunden an den Sauerstoffspitzen. Die übrigen Metavanadate bestehen aus dreieckigen bipyramidalen Ketten, verbunden entlang einer Kante.

---

, , .- , 950°. - - , . - VO₄, . - , .

     

Cobalt-pyridine bond strength in RCo[N,N′-ethylenebis(salicyclideneaminato)] (pyridine) R=Me,Et,n-Pr,i-Pr,n-Bu,i-Bu

The use of differential scanning calorimetry has provided enthalpies,H (298 K), of the dissociation reactions RCo(salen) (pyridine) (c) RCo(salen) (c)+pyridine(g)R=Me 34.5, Et 21.9,n-Pr 12.8,i-Pr 11.1,n-Bu 8.3 andi-Bu 13.5 kJ mol^–1

---

Zusammenfassung Mit Hilfe der Differential-Scanning-Kalorimetrie wurden die EnthalpienH(298 K) der Dissoziationsreaktionen RCo(salen)(Pyridin)(c) RCo(saleo)(c)+Pyridin(g) bestimmt: R=Me 34,5, Et 21,9,n-Pr 12,8,i-Pr 11,1,n-Bu 8,3 undi-Bu 13,5 kJ·mol^–1.

---

(298 K) : R() () R ()+() R R = – 34,5; – 21,9; - –12,8; - 11,1; - –8,3 13,5 · ^–1.

     

Dissociative adsorption of propene on chromium molybdate

TPD studies of the interaction of propene with oxidized chromium molybdate have revealed that propene is reversibly chemisorbed on the Cr(MoO₄)₃ surface. The kinetic order of propene desorption is close to 2, which indicates a dissociative character of adsorption. It permits to suggest the presence of a -allyl complex of propene on the surface.

---

. , . , . - .

     

Specificity of states of Cu2+ ions in ZSM zeolites due to the cooperative Jahn-Teller effect

Crystalline silicate of ZSM zeolite structure was synthesized via hydrothermal crystallization at large contents of copper. ESR spectra of Cu²⁺ ions stabilized in this system are determined by the specific ordering due to the cooperative Jahn-Teller effect of Cu²⁺ ions with the d_x ²–y² ground state.

---

423° ZSM . Cu(II), , - Cu²⁺ cdx²–y²— .

     

Hydrogenolysis reactions during propane aromatization over Pt/ZSM-5

Propane aromatization has been investigated over Pt/ZSM-5 in the temperature range of 400–500°C. Hydrogenolysis of propane to methane occurs mainly on the platinum sites and becomes an important route in propane transformation when reactions leading to aromatics tend to reach thermodynamic equilibrium.

---

Pt/ZSM-5 400–500°C. , .

     

Kinetic and mechanistic studies on the oxidation of arginine and histidine by chloramine-T in hydrochloric acid medium

The oxidation of amino acids by chloramine-T (CAT) in HCl medium at 30°C indicates simultaneous catalysis by H⁺ and Cl^– ions in the HCl concentration range of 0.04–0.12 M. The reaction is first order with respect to concentrations [CAT], [H⁺] and [arginine], but zero order with respect to [histidine]. The rate depends also on Cl^– concentration following 0.7th order. At HCl concentrations >0.12 M, the rate equation is:w=k[CAT] [amino acid]^0.6 and is independent of the [Cl^–]. A suitable mechanism has been suggested.

---

-T (CAT) HCl (30°C) H⁺, Cl^– [HCl]=0,04–0,12M. [CAT], [H⁺] [] []. [Cl^–]^0,7. [HCl]>0,12M =k · [CAT][]^0,6 [Cl^–]. .

     

Dehydrogenation of methanol to formaldehyde over titanium alloys

The dehydrogenation of methanol to formaldehyde has been studied in the temperature range between 523 and 723 K over titanium alloys. The FeTi alloy showed a high selectivity for the formation of formaldehyde. Addition of zinc increased the specific rate of formaldehyde formation with a simultaneous decrease in its selectivity.

---

523 723 K . FeTi . Zn .

     

Computation in kinetics, IV. Regression estimation of Arrhenius equation parameters from non-isothermal kinetic data

Computer method for evaluation of Arrhenius equation parameters from non-isothermal kinetic data is offered in KILET program. Changes of temperature can be linear, hyperbolic or of any smooth function which could be expressed by a polynomial of up to 4th degree. The method is demonstrated on examples of linear and hyperbolic changes for simulated and experimental data. The advantage of non-isothermal experiment over isothermal one for evaluation of kinetic solution data is stressed.

---

KILET. , , 4- . . .

     

DTA study of the reactions of non-metal fluorides with inorganic compounds

On the basis of the calculated Gibbs energy change for the standard state, the possibility of carbon tetrafluoride, silicon tetrafluoride, dichlorodifluoromethane and sulfur hexafluoride reacting with a number of elements and their compounds was evaluated. The reactions were studied by differential thermal analysis. Fluorination reactions of metals and oxides with dichlorodifluoride were investigated, and the temperature conditions of the syntheses were determined by measuring the temperature at the start of interaction (t _si.).The existence of a correlation betweent _si.) andH _formation ^o for the fluorinating agents was assumed, and a sequence of the fluorinating power of the non-metal fluorides was established. The perspectives of using non metal fluorides in the synthesis of inorganic fluorides are discussed.

---

Zusammenfassung Auf Grund der berechneten Gibbsschen Energieänderungen des Standardzustandes wurde die Möglichkeit von Reaktionen zwischen Kohle und Silikontetrafluorid, Dichlordifluormethan, bzw. Schwefelhexafluorid, sowie einer Anzahl von Elementen und ihrer Verbindungen ausgewertet. Das tatsächliche Zustandekommen der Reaktionen wurde durch Differentialthermoanalyse untersucht. Fluorierungsreaktionen von Metallen und Oxiden mit Dichlordifluormethan, Silikontetrafluorid und Schwefelhexafluorid wurden untersucht und die Temperaturbedingungen der Synthesen durch Messungen der Temperatur am Anfang der Wechselwirkung (t _s.i) bestimmt.Unter Annahme der Existenz einer Korrelation zwischent(_s.i), undH _Bildung ^o der fluorierenden Substanzen wurde eine Sequenz des Fluorierungsvermögens der Nicht-Metallfluoride aufgestellt. Die Perspektive der Anwendung von Nicht-Metallfluoriden bei der Synthese anorganischer Fluoride wird erörtert.

---

Résumé A partir des variations de l'énergie de Gibbs calculée à l'état standard, on a évalué la possibilité qu'il se produise une réaction entre le carbone et la fluorure de silicium, le dichlorodifluorométhane et l'hexafluorure de soufre ainsi que plusieurs éléments et leurs composés. Le déroulement effectif des réactions a été étudié par analyse thermique différentielle. Les réactions des métaux et oxydes avec le dichlorodifluorométhane, le tétrafluorure de silicium et l'hexafluorure de soufre ont été examinées et les températures où s'effectuent les synthêses ont été difinies en mesurant la température du début de réaction (t _s.i).En supposant l'existence d'une corrélation entret _s.i). etH _formation ^o pour les agents de fluoration, une séquence du potentiel fluorant des fluorures non-métalliques a été établie. La perspective de l'utilisation des fluorures non-métalliques pour la synthèse des fluorures inorganiques est discutée.

---

, . - . - , . « » (t _..). t _... ° o. , . .