Desorption of99Mo from spent99Mo/99mTc generator

A simple method for desorption and purification of⁹⁹Mo from spent⁹⁹Mo/^99mTc generators is described. The alumina column was washed successively with 0.9% saline water, 35% H₂O₂, and then the⁹⁹Mo was eluted with 2M NH₄OH. Ammonia and residual H₂O₂ were removed by heating the eluate. Finally,⁹⁹Mo solution was passed through a 0.2 m membrane filter to remove precipitated aluminium hydroxide.     

Pharmaceutical grade sodium [99mTc] pertechnetate from low specific activity 99Mo using an automated 99Mo/99mTc-TCM-autosolex generator

Performance study of a computer controlled automated closed cyclic module for the separation and recovery of ^99mTc from low specific activity (n, γ) ⁹⁹Mo using methyl ethyl ketone (MEK) solvent extraction technique named ⁹⁹Mo/^99mTc-TCM-AUTOSOLEX (Technetium automated solvent extraction) Generator is described. The entire system is automated and controlled by a user-friendly PC based graphical user interface that actually supervises process via an embedded system based electronic controller. The average yield of separation of ^99mTc was above 85 % and ⁹⁹Mo breakthrough in ^99mTc pertechnetate was <0.002 %. The sodium pertechnetate obtained was a clear solution having pH 6–7, Radiochemical (RC). Purity >99 %, MEK content <0.1 % (v/v), Al and Mo content <10 µg/ml. R. C. Purity of ^99mTc-radiopharmaceuticals studied was not less than 96 %. Bio-Quality control studies confirm that sodium pertechnetate obtained was sterile and pyrogen free. Imaging studies in animals and humans with limited radiopharmaceuticals show that the quality of ^99mTc-pertechenate obtained in the present module was good enough to do clinical study.     

Evaluation of proton induced reactions on 100Mo: New cross sections for production of 99 mTc and 99Mo

The use of the ⁹⁹Mo^99mTc generator in nuclear medicine is well established world wide. The production of the ⁹⁹Mo (T_1/2 = 66 h) parent as a fission product of ²³⁵U is largely based on the use of reactor technology. From the early 1990's accelerator based production methods to provide either direct produced ^99mTc or the parent ⁹⁹Mo, were studied and suggested as potential alternatives to the reactor based production of ⁹⁹Mo. A possible pathway for the charged particle production of ^99mTc and ⁹⁹Mo is irradiation of molybdenum metal with protons via the reaction ¹⁰⁰Mo(p,2n)^99mTc and ¹⁰⁰Mo(p,pn)⁹⁹Mo, respectively. The earlier published excitation functions show large differences in their maximum that result in large differences in the calculated yields. We therefore decided to study the excitation function for these proton-induced reactions. In this work the newly measured excitation functions as well as an evaluation of earlier measured data and a discussion of the observed disagreements are presented.     

Isotope exchange between 12-molybdocerate(IV) and sodium molybdate-99Mo in aqueous media

12-molybdocerate(IV) gel labelled with⁹⁹Mo has been prepared via isotope exchange between a column of inactive molybdate matrix and a mobile solution of⁹⁹-Mo-sodium molybdate(VI) in 0.1 mol·dm^–3 HNO₃. The composition and nature of the reaction mixture, concentration of Mo(VI) in the reactants, reaction temperature and/or drying temperature of the gel matrix on the exchange yeild of⁹⁹Mo and time of reaction are explored using the batch equilibration and/or the chromatographic column methods. The obtained material is evaluated for use in preparation of elution-type⁹⁹Mo-^99mTc generators.     

A novel technique for the separation of99mTc from99Mo

A new technique for the separation of^99mTc from low specific activity⁹⁹Mo is reported. A separation based on the principle of precipitation of⁹⁹Mo as calcium molybdate has been investigated. On precipitating⁹⁹MoO ₄ ^2– from alkaline solution as calcium molybdate under controlled conditions, the^99mTcO ₄ ^– is found to remain quantitatively in the supernatant solution with little carry-over of⁹⁹Mo. This calcium molybdate (⁹⁹Mo) could be redissolved and reprecipitated at regular intervals, yielding^99mTc quantitatively in aqueous neutral solutions. Calcium molybdate precipitates containing up to 1.5 GBq of⁹⁹Mo and 130–180 mg of molybdenum were prepared and evaluated. The performance in terms of repeated^99mTc separation gave yields of 75–93% with acceptable readionuclidic and radiochemical purity.     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

99mTc generator with hydrated MnO2 as adsorbent of 99Mo

An ^99mTc generator with MnO₂ as adsorbent of ⁹⁹Mo was investigated. Through batch experiments the retention of ⁹⁹Mo onto MnO₂was studied as a function of the shaking time and the pH value of the ⁹⁹Mo solution. It was found that ⁹⁹Mo showed a retention of 100% onto MnO₂ at the pH range from 3 to 11, and the equilibrium distribution was reached in less than 10 minutes. In column experiments the retention of ⁹⁹Mo onto MnO₂ was also high: 99.72%. In this case, the pH of the utilized ⁹⁹Mo solution was 5. The ^99mTc could be eluted from the MnO₂-⁹⁹Mo column by using either distilled water with a pH of 5 or an aqueous solution of 0.9% NaCl. With the saline solution, the ^99mTc elution yields were higher than 80%, and only one aliquot of 5 ml was needed to get these yields. The best results were obtained when the column was packed with 1 g of MnO₂. The water and the saline solution were passed through the column at a rate of 1.25 ml/min.     

Preparation of 99Mo/99mTc generator based on alumina 99Mo-molybdate (VI) gel

In this work alumina ⁹⁹Mo-molybdate (VI) gel is evaluated as a column matrix for use in the preparation of small chromatographic column type ^99mTc generator. Alumina molybdate (VI) gel is prepared by dissolving inactive MoO₃ with aluminum foil in 5 M NaOH solution containing ⁹⁹Mo radiotracer. After complete dissolution, 0.5 H₂O₂ was added to the reaction mixture solution and acidified to pH 5.5 with concentrated HNO₃. The formed AlMo precipitate was washed with NaNO₃ solution, dried at 50 °C for 24 h and then packed in the form of a chromatographic column for elution of the generated ^99mTc radionuclide with physiological saline solution (0.9 % NaCl). Greater than 86 % of the generated ^99mTc activity is immediately and reproducibly eluted with passing 10 mL of the saline solution through 2.0 g of alumina ⁹⁹Mo-molybdate column bed at a flow rate of about 1.0 mL/min. The high radiochemical ≥98.6 % TcO₄ ^?, radionuclidic ≥99.90 % ^99mTc and chemical purities of the eluates satisfy the specifications for use in nuclear medicine.     

Separation of99Mo from132Te using thiourea as complexing agent. Application to the separation of99Mo from fission products

A radiochemical method to isolate⁹⁹Mo from¹³²Te, both produced in the fission of²³⁵U, has been developed. The method is based on the formation of a cationic complex of tellurium with thiourea in acid medium which is retained (98.7±0.5)% on a cation exchange resin (Dowex 50W-X8, 100–200 mesh), while (99.8±0.05)%⁹⁹Mo passes through it, due to the non-formation of such complex in the same experimental conditions. The radionuclidic purity of⁹⁹Mo was found to be suitable for the preparation of⁹⁹Mo–^99mTc generators. The retention of⁹⁹Mo on an alumina column as a function of pH was investigated and the best pH range for this purpose was found to be 4.0–4.5.     

The feasibility of producing a99Mo:99mTc generator using the Miniature Neutron Source Reactor (MNSR)

A theoretical investigation of the feasibility of producing a molybdenum-99: technetium-99m generator from MoO₃ using a 30 kW Miniature Neutron Source Reactor (MNSR) has been made. At the rated thermal neutron flux of 10¹² n·cm^–2·s^–1 and irradiation time of 2.5 hours per day, for 8 consecutive days, activities of 7.1 mCi and 5.2 mCi were calculated for⁹⁹Mo and^99mTc, respectively. A 20 g sample of 99.5% chemically pure MoO₃ was used. The advantage for operating the reactor for 8 days instead of 6 days would be an increase of 11.4% and 15.5%, respectively, in the amount of⁹⁹Mo and^99mTc produced. it is calculated that an optimum irradiation scheme is achieved when the reactor is operated for an extended period of 5 hours a day for 5 days a week at a lower flux level of 7.5·10¹¹ n·cm^–2·s^–1. With this optimum operation scheme, there would be an increase in the weekly specific activity of 36% and 37.9% for⁹⁹Mo and^99mTc, respectively.     

Experimental cross section evaluation for innovative 99Mo production via the (α,n) reaction on 96Zr target

The high-specific activity ⁹⁹Mo accelerator-based production, via the (α,n) reaction on ⁹⁶Zr-enriched target, has been investigated in the present work. The excitation function measurement has been performed in the energy range 8–34 MeV at the ARRONAX facility, using the well-known stacked foils technique on natural zirconium as target. A general good agreement in the cross section trend has been observed, once compared to former measurements. A different (i.e. higher) peak value and a shift of about 2 MeV towards larger energies have however been found. Assuming a fully enriched ⁹⁶Zr target irradiated by an α-beam at suitable energy (E = 25 MeV), the ⁹⁹Mo production yield has thus been estimated. At last the alternative production routes, based on the ⁹⁶Zr(α,n)⁹⁹Mo and ¹⁰⁰Mo(p,x)⁹⁹Mo/^99mTc reactions, are compared.     

Radiochemical separation of99Mo from natural uranium irradiated with thermal neutrons

⁹⁹Mo was separated from uranium and insoluble fission product hydroxides. More than 98% of⁹⁹Mo radioactivity was extracted with bis (2-ethylhexyl)phosphoric acid. The organic phase was washed and⁹⁹Mo was back-extracted from the organic phase with NH₄OH solution. The percent recovery from the organic phase was 91% and the purity of⁹⁹Mo was more than 99%. Pure^99mTc was also extracted from the organic phase with a saline solution. Reversed-phase partition chromatography was used for the purification of⁹⁹Mo from¹³¹I and other fission products (10% HDEHP on kieselguhr bed).¹³¹I and other isotopes were quantitatively eluted with 0.1M H₂SO₄,⁹⁹Mo was eluted using a mixture of 0.5 M HCl and 30% H₂O₂.     

A99Mo-99mTc generator based on the use of zirconium molybdophosphate-99Mo gel

A modified⁹⁹Mo–^99mTc gel generator is described. The present generator uses an insoluble zirconium molybdophosphate (ZrMP) gel tagged with⁹⁹Mo. Molybdenum-99 is chemically combined in the gel structure and cannot be eluted from the matrix. The presence of phosphate increases the chemical stability of the gel and decreases the molybdenum breakthrough. The prepared gel is sufficiently porous to permit ready diffusion of^99mTcO ₄ ^– which can be cluted with saline in yields of up to 90%. The gel was found to contain 25.1% Mo, 21.9% Zr, and 0.7% P in a molar ratio of 1.09:1.0:0.09, respectively. The high molybdenum content of the gel allows the use of cheap, non-polluting (n, )⁹⁹Mo. The eluted^99mTc was of high purity and can be used for medical and pharmaceutical applications.     

Preparation of99Mo,132Te isotopes and99mTc,132I generators

Adsorption and desorption of⁹⁵Zr−⁹⁵Nb,⁹⁹Mo,¹⁰³Ru,¹³²Te and²³⁹Np in a HCl-alumina system were studied in order to purify⁹⁹Mo and¹³²Te obtained by the cation-exchange separation of fission products and to prepare highly pure^99mTc and¹³²I generators.⁹⁹Mo and¹³²Te, of which radionuclidic purity was over 99.99% and 99.999%, respectively, could be obtained by passing the cation-exchange separated Mo and Te fractions through alumina columns, by washing with HCl and finally by eluting⁹⁹Mo with 1M NH₄OH and¹³²Te with 3M NaOH. In order to raise the recovery of⁹⁹Mo and¹³²Te from the alumina columns, they should be eluted as quickly as possible after the adsorption. The direct use of the alumina column containing⁹⁹Mo or¹³²Te as the generator allowed milking of^99mTc or¹³²I, of which radionuclidic purity was over 99.999%. Milking yields of^99mTc with 0.1M HCl and¹³²I with 0.01M NH₄OH were 77% and 90%, respectively. The latter value was much higher than that in usual performance of the generator.     

A simple and sensitive separation technique of 99Mo and 99mTc from their equilibrium mixture

The present work describes a simple and inexpensive separation method of ⁹⁹Mo from the equilibrium mixture. The liquid–liquid extraction technique has been employed to separate ⁹⁹Mo and ^99mTc using triisooctylamine (TIOA). The ⁹⁹Mo and ^99mTc were quantitatively separated out in 2 M TIOA with tripled distilled water; ^99mTc was back extracted from TIOA organic phase to aqueous phase by 0.1 M DTPA. The species information or indirect speciation of molybdenum was also established by the extraction profile of the molybdenum.     

Hydrated titanium dioxide as an adsorbent for99Mo−99mTc generator

The adsorption behaviour of⁹⁹Mo in the form of molybdate and of^99mTc in the form of pertechnetate on hydrated titanium dioxide was investigated at different molarities of hydrochloric acid. The adsorption capacity of molybdate on hydrated TiO₂ is higher than on Al₂O₃. A^99mTc-generator is suggested. This generator is based on the adsorption of (⁹⁹Mo) molybdate on hydrated TiO₂, at acidities of 0.05–0.1M. HCl.^99mTc is eluted with 0.9% NaCl. Radionuclidic, radiochemical and chemical purities of the eluates were checked. This generator seems to have a great potential as compared to the traditional alumina generators.     

Initial generation and separation of99Mo at Sandia National Laboratories

The radioisotope^99mTc, used in greater than 80% of nuclear medicine applications, has traditionally been produced and supplied to radiopharmaceutical companies in the form of its precursor⁹⁹Mo. Nuclear fission produced⁹⁹Mo had been supplied by Nordion International of Canada and Cintichem, Inc. of New York, USA. With the shutdown of Cintichem's reactor in 1989, a need was recognized for a US supply, and the US Department of Energy recently published a record of decision designating Sandia National Laboratories (SNL) to meet that need. A recent campaign was launched which utilized the SNL Annular Core Research Reactor to irradiate UO₂ coated targets fabricated by Los Alamos National Laboratory to produce⁹⁹Mo. The irradiated targets were chemically processed in the SNL Hot Cell Facility to separate and purify the⁹⁹Mo. The campaign also included final product quality analysis, and process waste handling. The campaign was accomplished with high⁹⁹Mo recovery. Final product quality was assessed at SNL, and samples were sent to an outside laboratory for independent verification. The campaign provided data and experience useful in pursuing US Food and Drug Administration and radiopharmaceutical company approval.     

<Superscript>99</Superscript>Mo/<Superscript>99m</Superscript>Tc generators based on aluminum molybdate gel matrix prepared by nano method

A procedure for preparation of ⁹⁹Mo/^99mTc radioisotope generator based on low specific activity neutron activated ⁹⁹Mo was developed. Aluminum molybdate(VI)-⁹⁹Mo of high Mo(VI) content (~?364 mg/g Al⁹⁹Mo) was prepared by mixing low specific activity molybdate(VI)-⁹⁹Mo and aluminum mixture solution with isoamyl alcohol. Al⁹⁹Mo gel matrix was precipitated when the pH of the mixture solution was raised to ~?5 by addition of NaOH to the mixture. Radiometric measurements indicate the strong fixation of Molybdate(VI)-⁹⁹Mo species in the form of the sparingly insoluble Al⁹⁹Mo gel matrix. The prepared AlMo gel matrix was physiochemically characterized. Al⁹⁹Mo gel matrix was used as a base material for preparation of ⁹⁹Mo/^99mTc generator. The ^99mTc eluted from ⁹⁹Mo/^99mTc radioisotope generator was found to have relatively high elution yield (84?±?2.3%), radionuclidic (≥?99.99%), radiochemical (98.1?±?0.9%) and chemical purity.     

Absolute intensity of the 140.5 keV gamma-ray of99Mo

The induced activity of the⁹⁹Mo isotope is mostly determined via the 140.5 keV γ-line, which is the strongest gamma-ray of its daughter,^99mTc. Some recent literature, however, indicates a direct feeding of this energy level from the mother isotope as well. Considering the importance of this line in practice as well as the large controversy and scattering in relevant nuclear data available at present, a combined effort was made to remeasure this questionable absolute intensity. A relative method of irradiating a Mo-target with reactor neutrons and repeatedly measuring its (n,γ) induced activity relative to the 181.1 keV and 739.5 keV gamma lines of⁹⁹Mo as internal references was used. The weighted average of different runs yielded γ(⁹⁹Mo, 140.5 keV)=(5.07±0.37)%. As a consequence, when the 140.5 keV gamma line is used, the contribution from the⁹⁹Mo mother isotope should always be taken into account, e.g. in neutron cross-section measurements and neutron activation analysis.     

Preliminary study of quality control of99m Tc from99Mo generators

The separation of Tc(VII) from Mo(VI) by thin-layer and paper-chromatography is discussed. Some aspects concerning the formation and identification of lower oxidation states of Tc(VII) are also mentioned. Finally, a spot test is recommended for the determination of Mo(VI) and Al, which can be contaminants in the Tc(VII) solution eluted from the⁹⁹Mo column, filled with Al₂O₃.