<Emphasis Type="Italic">In vitro</Emphasis> bioactivity of 70 wt.% SiO<Subscript>2</Subscript> — 30 wt.% CaO sol-gel glass,doped with 1, 3 and 5 wt.% NbF<Subscript>5</Subscript>

The 70SiO₂-30CaO (wt.%) sol-gel glasses doped with 1, 3 and 5 NbF₅ (wt.%) were prepared via polystep sol-gel route. The synthesized glasses were characterized by XRD, FTIR and SEM. Changes in 1.5 SBF solutions were measured by ICP-AES. XRD of the glasses stabilized at 700°C for 6 hours proved the presence of niocalite. FTIR was consistent with XRD data. The in vitro bioactivity study of all glasses prepared were carried out by soaking in 1.5 simulated body fluid (1.5 SBF) at 37°C for 6 and 12 days in static conditions. The FTIR reveals the formation of A-type and B-type carbonate containing hydroxyapatite (CO₃HA) layer. Changes in 1.5 SBF solutions, after 6 days of soaking, show that the Ca concentration increased significantly, compared to the initial Ca content in the 1.5 SBF solution before in vitro test. After 12 days of immersion, the Ca concentration decreased, i.e., the formation of HA phase consumed Ca from 1.5 SBF solution. For all soaking times, the concentration of P is much lower than that the used 1.5 SBF. Based on these results we suggest that Ca and P play an active role in the future of the glasses. SEM depicts that the different morphology of hydroxyapatite can be formed as a function of soaking time.     

Organic/Inorganic bioactive materials Part III: in vitro bioactivity of gelatin/silicocarnotite hybrids

In this work we present our experimental results on synthesis, structure evolution and in vitro bioactivity assessment of new gelatin/silicocarnotite hybrid materials. The hybrids were obtained by diluting gelatin (G) and silicocarnotite (S) ceramic powder with G:S ratios of 75:25 and 25:75 wt.% in hot (40°C) water. The hybrids were characterized using XRD, FTIR, SEM/EDS and XPS. FTIR depicts that the “red shift” of amide I and COO⁻ could be attributed to the fact that the gelatin prefers to chelate Ca²⁺ from S. The growth of calcium phosphates on the surface of the hybrids synthesized and then immersed in 1.5 SBF for 3 days was studied by using of FTIR, XRD and SEM/EDS. According to FTIR results, after an immersion of 3 days, A and B-type CO₃HA can be observed on the surface. XRD results indicate the presence of hydroxyapatite with well defined crystallinity. SEM/EDS of the precipitated layers show the presence of CO₃HA and amorphous calcium phosphate on the surface of samples with different G/S content when immersed in 1.5 SBF. XPS of the G/S hybrid with 25:75 wt.% proved the presence of Ca-deficient hydroxyapatite after an in vitro test for 3 days.     

Organic/inorganic bioactive materials part IV: <Emphasis Type="Italic">In vitro</Emphasis> assessment of bioactivity of gelatin-calcium phosphate silicate/wollastonite hybrids

Biohybrids consisting of gelatin (G) and calcium phosphate silicate/wollastonite (CPS/W) have not been prepared so far. In this work our results are focused on the possibility of obtaining G-CPS/W bioactive hybrids in vitro. XRD, FTIR, SEM/EDS techniques were employed to characterize the synthesized hybrid materials. FTIR shows that before immersion in 1.5 SBF the “red shift” of COO- band for pure G is observed. The presence of this bond could be attributed to the formation of COO-Ca²⁺ via non-biomimetic route. After immersion in 1.5 SBF, FTIR shows the presence of A- and B-type carbonate containing hydroxyapatite (A/B-CO₃HA). ESD and FTIR show that small amount of calcite (CaCO₃) are present after in vitro test in 1.5 SBF for 3 days. XRD reveals that CO₃HA and small amounts of CaCO₃ can be detected after in vitro test. SEM results obtained for immersed samples show that hydroxyapatite (HA) particles fully covered the surface of the hybrids by a layer composed of spherulites. At higher magnification, very small elongated crystallites could be observed.      

Organic/Inorganic bioactive materials Part II: in vitro bioactivity of Collagen-Calcium Phosphate Silicate/Wollastonite hybrids

In the present study, novel hybrid materials of Collagen (C) and Calcium Phosphate Silicate/Wollastonite (CPS/W) were synthesized. The CPS/W ceramic was prepared via polystep sol-gel method. The dissolution test of CPS/W ceramic was filled with TRIS-HCl buffer. FTIR depicts that hydroxyl carbonate apatite (OHCO₃HA) was observed after 3 days of immersion in TRIS-HCl buffer. Biohybrids of C-CPS/W were produced from diluted hydrochloric acid collagen type I and ceramic powder with different ratios of C and CPS/W equal to 25:75 and 75:25 wt.%. The synthesized hybrids were characterized by FTIR, XRD and SEM. FTIR depicts a “red shift” if amide I could be attributed to the fact that the collagen prefers to chelate Ca²⁺ from partial dissolution of CPS/W ceramic. The growth of B-type carbonate containing hydroxyapatite (B-CO₃HA) on the C-CPS/W hybrids soaked in 1.5SBF was observed. The negatively charged carboxylate groups from the collagen may be responsible for hydroxyapatite (HA) deposition. This fact was confirmed by the “red shift” of carboxylate groups of collagen in FTIR spectra. The formation of HA was observed by FTIR, XRD and SEM.     

Organic / inorganic bioactive materials Part I: Synthesis, structure and in vitro assessment of collagen/silicocarnotite biocoatings

The silicocarnotite, as an inorganic part of the coatings, has been synthesized using a polystep sol-gel method. The chemical composition of the prepared silicocarnotite sol is described as 58.12 CaO, 29.42 P₂O₅, 12.45 SiO₂ (wt%), where Ca/P+Si = 1,67. The acid soluble type I collagen, as an organic part of the obtained coatings, was mixed with silicocarnotite powder in a weight ratio of 25:75 and 75:25 weight ratio without cross-linkage. The acidity of the obtained mixture was readjust with 25% NH₄OH to pH = 9.0. The mixture was then dried at 37°C for 12 h. The growth of B-type carbonate containing hydroxyapatite (B-type CO₃HA) in which CO₃ ²⁺→PO₄ ³⁻ on the surface of collagen/silicocarnotite coatings soaked in 1.5 simulated body fluid (1.5 SBF) was observed. The nucleation of B-type CO₃HA was estimated on the obtained coatings after 3 days immersion in 1.5 SBF. The negatively charged carboxylate groups from the collagen surface may be responsible for the HA deposition. This was confirmed by the “red shift” of carboxylate groups of collagen molecules in the FTIR spectra. After soaking in 1.5 SBF, the morphology of prepared coatings and HA formation was observed by SEM.     

Sol-gel bioactive glass-ceramics Part II: Glass-ceramics in the CaO-SiO2-P2O5-MgO system

Ceramics, with basic composition based on the CaO-SiO₂-P₂O₅-MgO system with different Ca+ Mg/P+Si molar ratio (R), were prepared via polystep sol-gel technique. The structure of the obtained ceramic materials has been studied by XRD, FTIR spectroscopy, and SEM. X-ray diffraction showed the presence of akermanite and HA for the sample with R = 1.68 and Mg substituted β-TCP and silicocarnotite for the sample with R = 2.16, after thermal treatment at 1200°C/2 h. The obtained results are in good agreement with FTIR. In vitro test for bioactivity in static condition proved that the carbonate containing hydroxyapatite (CO₃HA) can be formed on the surface of the synthesized samples. CO₃HA consisted of both A- and B-type CO₃²⁻ ions. SEM micrographs depicted different forms of HA particles, precipitated on the surface after soaking in 1.5 simulated body fluid (SBF).      

Sol-gel bioactive glass-ceramics Part I: Calcium phosphate silicate/wollastonite glass-ceramics

In this work we present experimental results about synthesis, structure evolution and in vitro bioactivity of new calcium phosphate silicate/wollastonite (CPS/W) glass-ceramics. The samples obtained were synthesized via polystep sol-gel process with different Ca/P+Si molar ratio (R). The structure of the materials obtained was studied by XRD, FTIR spectroscopy and SEM. XRD showed the presence of Ca₁₅(PO₄)₂(SiO₄)₆, β-CaSiO₃ and α-CaSiO₃ for the sample with R=1.89 after thermal treatment at 1200°C/2h. The XRD results are in good agreement with FTIR analysis. SEM denotes that apatite formation can be observed after soaking in simulated body fluid (SBF).      

含10mol%氧化硅的钙磷酸盐玻璃陶瓷的合成及其体外生物活性

采用高分子网络凝胶法合成出SiO2-CaO-P2O5生物玻璃陶瓷,该材料具有较低含硅量和高钙磷比(nCa/nP=1.57)的特点,更接近人体硬组织的成分。将材料在SBF溶液浸泡研究材料的体外生物活性,通过TG/DTA,XRD,FTIR和SEM等方法对粉体和浸泡后的样品表面进行表征,ICP-AES对SBF溶液中钙、磷、硅离子的浓度进行检测。结果表明,氧化硅的添加有利于玻璃陶瓷表面磷灰石晶相的形成;随着浸泡时间的延长,沉积在样品表面的碳酸羟基磷灰石层逐渐由球型突起变为叶片状,溶液中钙、磷离子浓度降低,而硅离子浓度增加,说明材料具有良好的生物活性,适宜作为牙齿和骨骼的替代或修复材料。     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

介孔生物活性玻璃材料在模拟体液中的用量对考察其体外生物活性的影响

制备了具有骨修复性能的新型介孔生物玻璃(mesoporous bioactive glass, MBG)材料. 在其它条件相同时改变MBG在模拟生理体液(simulated body fluid, SBF)中的用量比(0.0001～0.002 g/mL), 考察了材料的体外生物活性. 用等离子体原子发射光谱测定了不同反应时间SBF中钙、磷、硅物种的浓度; 用傅立叶红外光谱和电子扫描显微镜对材料进行了表征. 结果表明: MBG材料表面羟基磷灰石的形成速度和材料在SBF中的用量比直接相关, 其中用量比在0.001 g/mL时表现出最佳的体外生物活性. 最佳用量比的确定, 对于深入理解MBG材料的结构与体外活性的关联, 筛选具有更佳生物活性的MBG材料有着重要的意义.     

5 V正极材料LiNi0.5Mn1.5O4的自蔓延燃烧合成及性能

通过自蔓延燃烧方法合成了性能优良的高电位5V锂离子电池正极材料LiNi0.5Mn1.5O4,利用傅立叶红外光谱(FTIR)、热分析(DSC/TG)、X射线衍射(XRD)、透射电镜(TEM)等方法对前驱物及样品的结构和物化性质等进行了分析和表征,考察了材料的电化学性能。结果表明,所制备样品具有单一的尖晶石相结构,具有4.7V充放电平台;在3.5V到5.2V之间进行充放电性能测试具有131mAh·g-1以上的可逆容量;在2C倍率下循环100次后的容量保持率为96%以上。     

Thermally stimulated crystallization of (20−x)LiO2-80TeO2-xWO3 glass system

Tellurite glasses of the (20−x)LiO₂-80TeO₂-xWO₃ system were synthesized (x=0, 5, and 10) and annealed at different temperatures, and the crystallization kinetics was studied using XRD, FTIR spectroscopy, and DSC techniques. XRD data evidenced the amorphous state of as-quenched samples, while thermally treated samples showed the growth of crystalline phases. FTIR spectroscopy was used to observe the evolution of the vibrational mode assigned to the TeO₂ phases. The presence of γ-TeO₂, α-TeO₂, and α-Li₂Te₂O₅ crystalline phases was observed for the sample TL, x=0, while only the first and second phases were observed for TLW5 and TLW10 samples, x=5 and 10, respectively, suggesting that WO₃ enters the structure preferentially as glass former, inhibiting the growth of the phase α-Li₂Te₂O₅.     

Efficiency of Fe3O4 Nanoparticles with Different Pretreatments for Enhancing Biogas Yield of Macroalgae Ulva intestinalis Linnaeus

In this work, different pretreatment methods for algae proved to be very effective in improving cell wall dissociation for biogas production. In this study, the Ulva intestinalis Linnaeus (U. intestinalis) has been exposed to individual pretreatments of (ultrasonic, ozone, microwave, and green synthesized Fe₃O₄) and in a combination of the first three mentioned pretreatments methods with magnetite (Fe₃O₄) NPs, (ultrasonic-Fe₃O₄, ozone-Fe₃O₄ and microwave-Fe₃O₄) in different treatment times. Moreover, the green synthesized Fe₃O₄ NPs has been confirmed by FTIR, TEM, XRD, SEM, EDEX, PSA and BET. The maximum biogas production of 179 and 206 mL/g VS have been attained when U. intestinalis has been treated with ultrasonic only and when combined microwave with Fe₃O₄ respectively, where sediment were used as inoculum in all pretreatments. From the obtained results, green Fe₃O₄ NPs enhanced the microwave (MW) treatment to produce a higher biogas yield (206 mL/g VS) when compared with individual MW (84 mL/g VS). The modified Gompertz model (R² = 0.996 was appropriate model to match the calculated biogas production and could be used more practically to distinguish the kinetics of the anaerobic digestion (AD) period. The assessment of XRD, SEM and FTIR discovered the influence of different treatment techniques on the cell wall structure of U. intestinalis.     

Thermal stability and glass transition behavior of PANI/γ-Al2O3 composites

Polyaniline/γ-Al₂O₃ (PANI/γ-Al₂O₃) composites were synthesized by in-situ polymerization at the presence of HCl as dopant by adding γ-Al₂O₃ nanoparticles into aniline solution. The composites were characterized by FTIR and XRD. The thermogravimetry (TG) and modulated differential scanning calorimetry (MDSC) were used to study the thermal stability and glass transition temperature (T _g) of the composites, respectively. The results of FTIR showed that γ-Al₂O₃ nanoparticles connected with the PANI chains and affected the absorption characteristics of the composite through the interaction between PANI and nano-sized γ-Al₂O₃. And the results of XRD indicated that the peaks intensity of the PANI/γ-Al₂O₃ composite were weaker than that of the pure PANI. From TG and derivative thermogravimetry (DTG) curves, it was found that the pure PANI and the PANI/γ-Al₂O₃ composites were all one step degradation. And the PANI/γ-Al₂O₃ composites were more thermal stable than the pure PANI. The MDSC curves showed that the nano-sized γ-Al₂O₃ heightened the glass transition temperature (T _g) of PANI.     

Crystal structure,physical properties and bond valence analysis of NaLuP2O7

Single crystals of a diphosphate NaLuP₂O₇ have been synthesized by the flux method and characterized by single-crystal X-Ray diffraction. NaLuP₂O₇ crystallizes in the monoclinic system with P2₁/n space group with cell parameters: a = 8.9985(8) Å, b = 5.3473(5) Å, c = 12.756(1) Å, β = 103.174° (1), V = 597.67 (9) Å³, Z = 4. Its structure consists of a three-dimensional framework of P₂O₇ units that are corner-shared by LuO₆ octahedra, forming tunnels running parallel to [010] which are occupied by Na atoms. NaLuP₂O₇ powder was characterized by XRD, SEM, FTIR and Raman spectroscopy. The activation energy of (1.49 eV) obtained by electrical measurements suggests the charge carriers to be the sodium cations. The activation energies obtained from impedance and loss spectra were analyzed in order to explain the mechanism of conduction. The correlation between ionic conductivity of NaLuP₂O₇ and its crystallographic structure was investigated and the most probable transport pathway model was determined.     

Novel polyaniline-LiNi0.5La0.02Fe1.98O4 nanocomposites prepared via an in situ polymerization

Polyaniline (PANI)-LiNi_0.5La_0.02Fe_1.98O₄ nanocomposites were synthesized by an in situ polymerization of aniline in the presence of LiNi_0.5La_0.02Fe_1.98O₄ ferrite. The products were characterized by Fourier transform infrared (FTIR), atomic force microscopy (AFM), powder X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). FTIR spectra and XRD indicated the formation of the PANI-LiNi_0.5La_0.02Fe_1.98O₄ composites. AFM study was shown that the average size of samples was less than 100 nm and the ferrite particles had an effect on the morphology of composites. The nanocomposites under applied magnetic field exhibited the hysteresis loops of the ferrimagnetic nature, the saturation magnetization and the coercivity varied with the ferrite content. The bonding model for the composites was also studied.     

Mechanical Properties and In Vitro Physico‐chemical Reactivity of Gel‐derived SiO2–Na2O–CaO–P2O5 Glass from Sand

In the present report, a bioactive glass was synthesized from silica sand as economic substitute to alkoxy silane reagents. Sodium metasilicate (Na₂SiO₃) obtained from the sand was hydrolyzed and gelled using appropriate reagents before sintering at 950 °C for 3 h to produce glass in the system SiO₂? Na₂O? CaO? P₂O₅. Compression test was conducted to investigate the mechanical strength of the glass, while immersion studies in simulated body fluid (SBF) was used to evaluate reactivity, bioactivity and degradability. Furthermore, the glass samples were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and energy dispersive X‐ray spectroscopy (EDX) to evaluate the microstructure and confirm apatite formation on the glass surface. The glass, dominated by bioactive sodium calcium silicate, Na₂Ca₂Si₃O₉ (combeite) crystals, had mechanical strength of 0.37 MPa and showed potentials for application as scaffold in bone repair.     

Thermal,structural, and impedance analysis of nanocrystalline magnesium chromite spinel synthesized via hydrothermal process

Nanocrystalline magnesium chromite spinel was synthesized through hydrothermal reaction of metal nitrate solutions in stoichiometric amount at different pH, temperature and time intervals. The synthesized products were characterized for crystallinity, phase identification, and surface morphology by X-ray diffraction (XRD) and scanning electron microscope (SEM). XRD patterns showed that as-synthesized product remained amorphous up to 250 °C. However, well-crystallized magnesium chromite spinel structure is formed after calcination at 850 °C. Rietveld refinement study confirms the formation of single-phase cubic structure MgCr₂O₄ with lattice parameter a = 8.3347 Å, and Fd3m space group. The as-processed MgCr₂O₄ products showed extensive XRD line broadening, and the mean crystallite size of such crystals was found to be mainly in size range of 85–124 nm. Surface SEM images of calcined specimens revealed that the matrix is uniform, and no separation of secondary phase was detected. Thermal stability was examined by thermogravimetry (TG), differential thermal analysis (DTA), and differential scanning calorimetry. TG/DTA reveals that MgCr₂O₄ is thermally stable above 700 °C. Fourier transform infrared (FTIR) spectra studies shows two strong bands, one around 600 cm^?1 which is attributed to the intrinsic vibrations of tetrahedral and other at 400 cm^?1 is due to octahedral one. FTIR confirms the formation of metal oxides. The bandgap energy was estimated by absorption spectroscopy in ultraviolet–visible range and was found to be 0.693 eV for MgCr₂O₄ specimen sintered at 1,000 °C. Isothermal shrinkage characteristic and coefficient of thermal expansion were determined by dilatometry. The powder specimens showed excellent densification at 1,250 °C temperature and uniformly fine grain sintered ceramics (>90 % relative density) with submicron grain size (2–5 μm) were obtained after sintering at 1,000–1,250 °C. Impedance studies were carried out at room temperature and equivalent circuit model (R ₁ Q ₁) (R ₂ Q ₂) (R ₃ Q ₃) is used to explain different relaxation processes. We report largest impedance values i.e., 6.74 × 10⁸ Ω, reduced dielectric constant (≈1.0), and low tangent loss (0.8) for MgCr₂O₄ sintered at 1,250 °C.     

Synthesis of La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript> by thermal treatment of mechanically activated salt mixture

A lanthanum zirconate La₂Zr₂O₇ was synthesized by soft mechanochemical method using zirconium oxynitrate ZrO(NO₃)₂·6H₂O and lanthanum carbonate La₂(CO₃)₃·8H₂O as reagents. Mechanical activation of the reagents was carried out in a centrifugal planetary ball mill. The processes occurring during calcination of the jointly and the separately mechanically activated salt mixture were studied using DSC, TG coupled with mass spectrometry, XRD analysis, and FTIR spectroscopy. It was shown that in the course of joint mechanical activation in the mill alongside with intimate mixing of the reagents and their amorphization exchange reaction occurred, producing lanthanum nitrate, basic lanthanum nitrate, basic zirconium carbonate, and hydrated zirconium oxide. The DSC curve of the jointly mechanically activated salt mixture showed a strong exothermic peak at 878 °C which was not associated with mass loss. This peak was attributed to La₂Zr₂O₇ crystallization in agreement with XRD data. Nanocrystalline lanthanum zirconate synthesized by annealing of the jointly mechanically activated salt mixture was characterized using XRD analysis, scanning, and transmission electron microscopy.     

Study of nano-sized (ZnFe2O4)y particles/CuTl-1223 superconductor composites

Zinc ferrite (ZnFe₂O₄)_y nanoparticles/Cu_0.5Tl_0.5Ba₂Ca₂Cu₃O_10−δ (CuTl-1223) superconductor composites with y = 0–2 wt.% were prepared by adding ZnFe₂O₄ nanoparticles into CuTl-1223 superconductor matrix and characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transforms infrared (FTIR) spectroscopy and dc-resistivity (ρ) measurements. The bulk CuTl-1223 superconductor matrix was synthesized by solid-state reaction and Zinc ferrite (ZnFe₂O₄) nanoparticles were separately prepared by sol–gel method. XRD analysis revealed the tetragonal and spinel structure of CuTl-1223 superconductor and ZnFe₂O₄ nanoparticles, respectively. The XRD analysis showed that increased concentration of ZnFe₂O₄ nanoparticles doesn't disturb the tetragonal structure of host CuTl-1223 superconductor matrix and has no appreciable effect on its lattice parameters. The SEM images confirm the granular structure of the host superconductor matrix. The presence of ZnFe₂O₄ nanoparticles in host superconductor matrix is confirmed by using FTIR study. Variation of zero resistivity critical temperature {T_c (0)} depends upon the concentration of the nanoparticles in the host superconductor matrix. The overall suppression of T_c (0) and diamagnetism with increasing nanoparticles concentration is most probably due to trapping of mobile free carriers and reflection of spin charge due to presence of paramagnetic ZnFe₂O₄ nanoparticles. There is possibility for the incorporation of Fe and Zn in the lattice sites during the synthesis process, which may also cause the reduction of T_c (0) of the final composites.