Synthesis and characterization of ferrocene containing block copolymers

Narrowly dispersed diblock copolymers containing poly(methyl methacrylate) [PMMA] or poly(nonafluorohexyl methacrylate) [PF9MA] as the first block and poly(ferrocenylmethyl methacrylate) [PFMMA] as the second block, were prepared by anionic polymerization for the first time. Disordered bulk morphologies in the case of PMMA‐b‐PFMMA were observed and explained in terms of low Flory–Huggins interaction parameter (χ ≤ 0.04). In the case of PF9MA‐b‐PFMMA hexagonally packed cylinder morphology (HEX) was substantiated from TEM and SAXS observations. Furthermore, high incompatibility between PF9MA and PFMMA blocks allowed for the formation of well‐ordered ferrocene containing cylinders on silica substrate upon exposure of the thin films to a saturated solvent vapor. It was shown that the cylinder orientation, parallel or perpendicular to the surface, could easily be controlled by appropriate choice of the solvent and without the need for preliminary surface modification, for example by means of grafted brush layer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 495–503     

Synthesis and surface properties of fluorinated block copolymers containing sulfonic groups

A series of fluorinated block copolymers with different fluorinated block lengths and compositions were synthesized by atom transfer radical polymerization (ATRP), and then the block copolymers containing sulfonic groups with various sulfonation levels were successfully prepared further via a sulfonation reaction. These well‐defined block copolymers were characterized by means of Fourier transform infrared (FTIR), ¹H‐nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The surface activities of the fluorinated block copolymers containing sulfonic groups in N‐methyl pyrrolidone solution and the surface properties of the films prepared from such a solution were examined, and the experimental results showed that the fluorinated block copolymers exhibited a high surface activity in solution and quite a low solid surface energy of films, even though they contain hydrophilic sulfonic groups. The critical surface tensions of these copolymers were estimated and were comparable to that of polytetrafluoroethylene. Even more interestingly, the surface activities of the block copolymers containing sulfonic groups or sodium sulfonate groups in aqueous solution were also measured. It was found that the surface activity in aqueous solution was weaker than that in N‐methyl pyrrolidone solution and depended on both the length of the fluorinated block and the sulfonation level of the block copolymers. The surface properties of the films prepared from the block copolymers in aqueous solution were tested, and most of these films exhibited a hydrophilic surface property. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4809–4819, 2004     

Synthesis and characterization of amphiphilic block copolymers with allyl side‐groups

The synthesis of a new cyclic carbonate monomer containing an allyl group was reported and its biodegradable amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MAC)] was synthesized by ring‐opening polymerization (ROP) of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) in the presence of poly (ethylene glycol) as a macroinitiator, with diethyl zinc as a catalyst. ¹³C NMR and ¹H NMR were used for microstructure identification of the copolymers. The copolymer could form micelles in aqueous solution. The core of the micelles is built of the hydrophobic P(LA‐co‐MAC) chains, whereas the shell is set up by the hydrophilic PEG blocks. The micelles exhibited a homogeneous spherical morphology and unimodal size distribution. By using the cyclic carbonate monomer containing allyl side‐groups, crosslinking of the PEG‐b‐P(LA‐co‐MAC) inner core was possible. The adhesion and spreading of ECV‐304 cells on the copolymer were better than that on PLA films. Therefore, this biodegradable amphiphilic block copolymer is expected to be used as a biomaterial for drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5518–5528, 2007     

Preparation and characterization of phenyl and undecyl oxazoline block copolymers

Undecyl and phenyl oxazolines were synthesized. They were copolymerized in different mole ratios using methyl nosylate as initiator. A series of di- and triblock copolymers with narrow molecular weight distributions as indicated by GPC were obtained. A three-armed block copolymer was also obtained by using 1,3,5-tris(bromomethyl)benzene as initiator. When the nonpolar undecyl block crystallized as a coating, the critical surface energy approached 21.0 dyn/cm, and the contact angle of water on the surface could be higher than 107°. The melting point increased as the chain length of crystallizable undecyl block increased, and the melting peak on DSC was very sharp when the length was equal to or longer than 25 monomer units. When these copolymers were coated on substrates, the work of adhesion with pressure sensitive adhesives was greatly reduced.     

Synthesis and characterization of double hydrophilic block copolymers containing semi-rigid and flexible segments

3-Methyl-(E)-stilbene (3MSti) and 4-(diethylamino)-(E)-stilbene (DEASti) monomers are synthesized and polymerized separately with maleic anhydride (MAn) in a strictly alternating fashion using reversible addition-fragmentation chain transfer (RAFT) polymerization techniques. The optimal RAFT chain transfer agents (CTAs) for each copolymerization affect the reaction kinetics and CTA compatibilities. Psuedo-first order polymerization kinetics are demonstrated for the synthesis of poly((3-methyl-(E)-stilbene)-alt-maleic anhydride) (3MSti-alt-MAn) with a thiocarbonylthio CTA (methyl 2-(dodecylthiocarbonothioylthio)−2-methylpropionate, TTCMe). In contrast, a dithioester CTA (cumyl dithiobenzoate, CDB) controls the synthesis of poly((4-(diethylamino)-(E)-stilbene)-alt-maleic anhydride) (DEASti-alt-MAn) with pseudo-first order polymerization kinetics. DEASti-alt-MAn is chain extended with 4-acryloylmorpholine (ACMO) to synthesize diblock copolymers and subsequently converted to a double hydrophilic polyampholyte block copolymers (poly((4-(diethylamino)-(E)-stilbene)-alt-maleic acid))-b-acryloylmorpholine) (DEASti-alt-MA)-b-ACMO) via acid hydrolysis. The isoelectric point and dissociation behavior of these maleic acid-containing copolymers are determined using ζ-potential and acid–base titrations, respectively. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 219–227     

Polyimide-polydimethylsiloxane copolymers containing nitrile groups

A novel series of nitrile-containing polyimide-polydimethylsiloxane copolymers was prepared by polycondensation reaction of 4,4′-oxydiphthalic anhydride with a mixture of an aromatic diamine, namely 2,6-bis(3-aminophenoxy)benzonitrile, and bis(aminopropyl)oligodimethylsiloxane of controlled molecular weight, in different ratios. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidone, N,N-dimethylformamide as well as in less polar solvents such as chloroform, and can be cast from solution into thin flexible films. The inherent viscosity was in the range of 0.43-0.55 dL/g. The polymers showed good thermal stability, the decomposition temperature being above 430 °C. They exhibited a glass transition temperature in the range of 149-219 °C, with reasonable interval between glass transition temperature and decomposition temperature. The surface morphology was investigated by scanning electron microscopy. The water dynamic contact angles were measured by tensiometric method. The free surface energy was evaluated based on Owens and Wendt equation. A composite film based on a polyimide-polydimethylsiloxane copolymer and pyrite ash powder has been prepared and its nanoactuation has been investigated.     

Preparation and characterization of polyimides containing triaryl imidazole side groups

A novel triaryl imidazole‐containing diamine, 3,5‐diamino‐N‐(4‐(4,5‐diphenyl‐1H‐imidazol)phenyl)benzamide, was successfully synthesized via the condensation of 4‐(4,5‐diphenyl‐1H‐imidazol)benzenamine and 3,5‐dinitrobenzoyl chloride, followed by reduction of the dinitro compound. A series of new aromatic polyimides with pendent triaryl imidazole moieties were prepared from the reaction of this diamine with various tetracarboxylic dianhydrides by a conventional two‐step polymerization process via thermal and chemical imidizations. The polyimides were obtained in quantitative yields with inherent viscosities of 0.21–0.44 dL/g. All the polymers are readily soluble in polar organic solvents. Flexible and strong films of polyimides were obtained by solution casting. The glass transition temperature of these polymers was in the range of 261–264°C. They were fairly stable up to a temperature around 300°C and lost 10% weight at 408°C under nitrogen. The ultraviolet–visible absorption spectra showed that all of the polymers had absorption maxima around 320 nm with a fluorescence emission maxima around 388–407 nm in N‐methyl‐2‐pyrrolidinone solution. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.7 V. Copyright © 2016 John Wiley & Sons, Ltd.     

Vibrational spectroscopic characterization of ethylene-Co-vinyl cinnamate copolymers before and after UV exposure

Vibrational spectroscopic studies of a series of ethylene-co-vinyl cinnamate (EVCIN) copolymers, before and after exposure to UV radiation, are reported. The purpose of these studies is to determine whether or not significant reaction (photo-crosslinking) of the cinnamate groups in EVCIN copolymers occurs upon UV exposure in the solid state as the concentration (fraction) of cinnamate groups is systematically reduced. By increasing the ethylene concentration in the EVCIN copolymers the cinnamate groups are “diluted” and progressively spaced apart in the copolymer. Somewhat surprisingly, we find that an EVCIN copolymer containing only 5 mole % vinyl cinnamate still undergoes a facile crosslinking in the solid state upon UV exposure.     

Synthesis of stimuli-responsive and adsorbable block copolymers with phosphonate anchor groups

By introducing phosphonate anchor groups into stimuli-sensitive polymers and adsorbing them onto pigments, a new and versatile kind of sensor could be built. At first, nitroxide-mediated radical polymerization was utilized to produce block copolymers of diethyl-4-vinyl-benzyl phosphonate and N-isopropylacrylamide/N,N-dimethylacrylamide or 2-vinyl pyridine, which could be hydrolyzed and adsorbed onto aluminum and titanium oxide, afterwards. The adsorption characteristics and the phase transitions were examined using surface plasmon resonance spectrometry, dynamic light scattering, differential scanning calorimetry, and UV/VIS spectroscopy. Herein, tunable temperature responsive block-co-polymers showed Langmuir-type adsorption behavior, whereas, pH-responsive particles varied in adsorption to Brunauer–Emmett–Teller isotherms. Finally, particle sizes and layer stabilities were characterized as well.     

Preparation, characterization and application of ZnO sol containing quaternary ammonium salts

The zinc oxide sol containing quaternary ammonium salts (DMDAAC-ZnO) was synthesized by zinc acetate and dimethyldiallyl ammonium chloride via the sol–gel process. Effects of zinc acetate concentration, diethanolamine dosage and dimethyldiallyl ammonium chloride dosage on the absorbance-ratio and viscosity of the sol were investigated. Zinc oxide sols were characterized by XRD, TEM and FT-IR. DMDAAC-ZnO was applied to cotton samples and cotton samples treated were tested by antibacterial activity, UV resistance and breaking strength. The antibacterial activity and UV resistance of samples treated by zinc oxide sol containing quaternary ammonium salt were both better than sample treated by zinc oxide sol.     

Some complexes containing carbon chains end-capped with tungsten or ruthenium groups and tricobalt carbonyl clusters

The Pd(0)/Cu(I)-catalysed reactions between Co₃(μ₃-CBr) (CO)₉ and W(CCCCH)(CO)₃Cp gives the C₅ complex {Cp(OC)₃W}CCCCC{Co₃(CO)₉} (2). Similarly, Co₃(μ₃-CBr)(μ-dppm)(CO)₇ and W(CCCCH)(CO)₃Cp or Ru(CCCCH)(dppe)Cp* give {Cp(OC)₃W}CCCCC{Co₃(μ-dppm)(CO)₇} and {Cp*(dppe)Ru}CCCCC{Co₃(μ-dppmn)(CO)₇} (5). An attempt to prepare a C₃ analogue from Ru(CCH)(PPh₃)₂Cp and Co₃(μ₃-CBr)(CO)₉ gave instead the acyl derivative {Cp(Ph₃P)₂Ru}CCC(O)C{Co₃(CO)₈(PPh₃)} (7). The X-ray structures of 2, 5 and 7 are reported: the C₅ chains in 2 and 5 have an essentially unperturbed -CC-CC-C formulation.     

Synthesis and characterization of novel liquid‐crystalline copolymers containing thermally stable photochromic groups

To overcome the defects of the thermal instability of azobenzene, a series of novel photochromic, chiral, liquid‐crystalline monomers and polymers were synthesized from (+)‐camphor. The copolymerization of the photochromic monomers with comonomers was carried out. The synthesized monomers and polymers were identified with nuclear magnetic resonance, Fourier transform infrared, and elemental analysis. The composition of the copolymers was estimated with elemental analysis. The specific rotation of the chiral compounds and polymers was evaluated. The thermal stability and phases of the polymers during heating and cooling cycles were studied with differential scanning calorimetry and thermogravimetric analysis. The phases of the polymers were identified with polarized optical microscopy textures and X‐ray diffraction analysis. The distance between the layers of smectic liquid crystals was estimated from the diffraction angles. Photoisomerization of the configurational E/Z structures was investigated with an ultraviolet–visible spectrophotometer with 300‐nm ultraviolet irradiation. The thermal stability of the Z‐structural segment in the polymers was confirmed through the heating of the polymer at 70 °C for over 10 h. The photoisomerization and thermal stability of the C?C bond in the polymeric materials were demonstrated through a series of novel chiral polymers synthesized in this investigation. Both the polarity of the center part and the molecular length at the ends of the molecules were found to be necessary factors for the formation of liquid‐crystalline molecules. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2026–2037, 2007     

Side-chain liquid-crystalline copolymers containing charge transfer groups

A series of side-chain liquid crystal copolymers have been prepared based on a polystyrene backbone and having 4-nitro-4'-oxyazobenzenealkyloxy and 4-methoxy-4'-oxyazobenzenealkyloxy pendant groups. All the polymers exhibit solely smectic behaviour. The thermal stability of the smectic phase is significantly enhanced in the copolymers when compared to the homopolymers. This is compared to the behaviour of the analogous monomeric compounds. The enhancement of the thermal stability is attributed to a specific interaction, possibly charge transfer.     

Photochromic liquid-crystalline copolymers containing crown ether groups

An approach was developed for the synthesis of new multifunctional photosensitive liquid-crystalline copolymers of the acryl series containing azobenzene, ionophoric, and mesogenic groups in the same macromolecule. The phase behavior of the copolymers was studied. Most of these copolymers were demonstrated to form nematic mesophases. An increase in the concentration of crown-containing groups to 26 mol.% leads to amorphization of the copolymers. The influence of complexation of the crown ether groups of the copolymers with potassium perchlorate on the mesomorphic properties of the systems was investigated. A comparative study of the photooptical properties of the copolymers in solution and thin films was performed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2332–2242, December, 2007.     

Hydroxyl end-capped macromers of N-vinyl-2-pyrrolidinone as precursors of amphiphilic block copolymers

Telechelic N-vinyl-2-pyrrolidinone (NVP) oligomers terminated by hydroxyl groups were prepared by radical polymerization in the presence of functional chain transfer agents. Then hydroxy-terminated poly(NVP) was used as initiator in the ring opening polymerization of ε-caprolactone (ε-CL). Experiments were performed either under basic conditions or by using SnOct₂ or ZnEt₂ as catalyst. The resulting amphiphilic AB-type block copolymers were thoroughly characterized by spectroscopic and thermal techniques. These data and fractionation in protic solvents indicated that the copolymerization products are constituted by a mixture of copolymers with a wide composition range. The water-soluble copolymer fractions formed micelles and nanoaggregates that showed an appreciable capacity of loading piroxicam, a hydrophobic non-steroidal anti-inflammatory drug. Contact angle measurements, atomic force microscopy, and surface plasmon resonance measurements indicated that the surface of films prepared from the insoluble fractions does not have antiopsonizing properties in spite of their high hydrophilicity.     

Synthesis of AB‐type block copolymers containing benzoxazole and anthracene groups by ATRP and fluorescent property

Two functional monomers, methacrylic acid 4‐(2‐benzoxazol)‐benzyl ester (MABE) containing the benzoxazole group and 4‐(2‐(9‐anthryl))‐vinyl‐styrene (AVS) containing the anthracene group were synthesized by rational design. The MABE was polymerized via atom transfer radical polymerization (ATRP) using ethyl 2‐bromoisobutyrate (EBIB) as initiator in CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) catalyst system; block copolymers poly(MABE‐b‐AVS) was obtained, which was conducted by using poly(MABE) as macro‐initiator, AVS as the second monomer, and CuBr/PMDETA as catalyst. The constitute of two monomers in block copolymers poly(MABE‐b‐AVS) by ATRP could be adjusted, that is the constitute of the benzoxazole group and the anthracene group could be controlled in AB‐type block copolymers. Moreover, the fluorescent properties of homopolymers poly(MABE) and block copolymers poly(MABE‐b‐AVS) were discussed herein. With the excitation at λ_ex = 330 nm, the fluorescent emission spectrum of poly(MABE) solution showed emission at 375 nm corresponding to the benzoxazole‐based part; with the same excitation, the fluorescent emission spectrum of poly(MABE‐b‐AVS) solution showed a broad peek at 330–600 nm when the monomer AVS to the total monomers mole ratio was 0.31, and the fluorescent emission spectrum of poly(MABE‐b‐AVS) in film state only showed one peak at 525 nm corresponding to the anthracene‐based unit that indicated a complete energy transfer from the benzoxazole group to the anthracene group. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3894–3901, 2007     

Electroluminescent block copolymers containing oxadiazole and thiophene via ATRP

Block copolymers containing thiophene units in one block and oxadiazole (OXD) units in the other were prepared. Atom transfer radical polymerization method was used to obtain the thiophene‐containing mesogen‐jacketed polymers, and the kinetic study indicated that the polymerization was controllable and the polymers could be used to initiate the polymerization of the OXD‐containing monomers. Photoluminescent spectra indicated that the fluorescence quantum yields of the polymers increased with increasing content of OXD. And, more OXD domains, that is, more interfaces between the hole‐transport parts and electron‐transport parts, resulting in the higher probability of exciplex formation. The electroluminescent devices containing the block copolymer with 64 mol % OXD as the emissive layer had a maximum brightness of 127 cd/m² and an extremely low onset voltage of 7.7 V, which indicated that the injection and transport of charge carriers were facilitated and the number of charge carriers was sufficiently high in early time after the voltage was turned on. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of pH-responsive diblock copolymers with cadaverine side groups

In this paper, we report the synthesis and characterization of a new pH-responsive diblock copolymer, methoxy poly(ethylene glycol)-b-poly[N¹-(4-vinylbenzyl) pentane-1,5-diamine dihydrochloride] (mPEG-b-PVBPDA). The monomer with cadaverine side group (N¹-(4-vinylbenzyl)pentane-1,5-diamine dihydrochloride, VBPDA) and the macroinitiator (mPEG-ACVA) were synthesized, respectively, and mPEG-b-PVBPDA was then obtained by free radical polymerization. The structure and molecular weight of mPEG-b-PVBPDA was confirmed by FTIR, ¹H NMR, and GPC-MALLS measurements. At low pH, it is hydrophilic due to the protonation of the amine groups. With increasing pH, deprotonation occurs, and the hydrophobicity of PVBPDA block increases. This molecular feature leads to interesting aggregation behavior of mPEG-b-PVBPDA in aqueous solutions at different pH as revealed by DLS measurements, TEM observations, and fluorescence spectrometry. This polymer was further subjected to gene delivery evaluations, and promising DNA transfection capacity has been found.