Low-valent vanadium oxide nanostructures with controlled crystal structures and morphologies

Low-valent vanadium oxide nanostructures have been synthesized in large quantities using commercial V2O5 powder as the precursor by a facile reduction method. The crystal structures and morphologies of vanadium oxide nanostructures can be adjusted by altering the concentrations and types of reductants. VO2(B) nanostructures are fabricated using oxalic acid as the reductant. VO2(B) nanobelts with widths of 80-150 nm, thicknesses of 20-30 nm, and lengths up to several micrometers can evolve to olive-like nanostructures composed of nanosheets with thicknesses of several nanometers and lateral dimensions of several micrometers as the concentration of oxalic acid increases. H2V3O8 nanobelts with widths of 200-300 nm, thicknesses of 10-20 nm, and lengths up to several 10s of micrometers are obtained under the reduction of V2O5 powder with ethanol. The belt-shaped morphologies of H2V3O8 are not affected by the concentration of ethanol.     

Formation of crystalline Na2V6O16·3H2O ribbons into belts and rings

Single-crystalline nanobelts and nanorings of Na(2)V(6)O(16)·3H(2)O structures have been facilely synthesized through a direct hydrothermal reaction between NaVO(3) and H(3)PO(4), without the addition of any harmful solvents or surfactants. The analytical techniques of scanning electron microscopy, transmission electron microscopy (TEM), powder X-ray diffraction, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, Fourier transform infrared, high-resolution TEM, and selected-area electron diffraction have been used to characterize the morphology, composition, and structure of the synthesized products. The Na(2)V(6)O(16)·3H(2)O nanobelts are up to several hundreds of micrometers in length and 100-300 nm in thickness, and for nanorings, the diameters are 4.5-6.5 μm. H(3)PO(4) plays a key role in maintaining the pH of the solution as well as producing PO(4)(3-) ions in solution. The chemical reactions and a possible growth mechanism involved in the formation of Na(2)V(6)O(16)·3H(2)O nanobelts and nanorings are briefly discussed.     

Synthesis and electrical transport of single-crystal NH4V3O8 nanobelts

Monoclinic NH(4)V(3)O(8) single-crystalline nanobelts with widths of 80-180 nm, thicknesses of 50-100 nm, and lengths up to tens of micrometers have been synthesized at large scale in an ammonium metavanadate solution by a templates/catalysts-free route. Such nanobelts grow along the direction of [010]. The individual NH(4)V(3)O(8) nanobelt exhibits nonlinear, symmetric current/voltage (I/V) characteristics, with a conductivity of 0.1-1 S/cm at room temperature and a dielectric constant of approximately 130. The dominant conduction mechanism is based on small polaron hopping due to ohmic mechanism at low electric field below 249 V/cm due to Schottky emission at medium electric field between 249 and 600 V/cm and due to the Poole-Frenkel emission mechanism at high field above 600 V/cm.     

Morphological evolution of (NH4)(0.5)V2O5·mH2O fibers into belts, triangles, and rings

In this contribution, single-crystalline (NH(4))(0.5)V(2)O(5)·mH(2)O xerogels made of belts, rings, triangles, and ovals have been synthesized using a surfactant-free hydrothermal method. The analytical techniques of scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR), high-resolution TEM (HRTEM), and selected area electron diffraction (SAED) have been used to characterize the morphology, composition, and structure of the as-prepared products. On the basis of SEM and TEM observations, we suggested that the as-prepared (NH(4))(0.5)V(2)O(5)·mH(2)O rings, triangles, and ovals have been formed by connecting two ends of the vanadium oxide sheet made of edge and corner sharing VO(5) square pyramids. The as-prepared (NH(4))(0.5)V(2)O(5)·mH(2)O nanobelts are up to several hundreds of micrometers long, 402-551 nm wide, and 235-305 nm thick. The thickness and width of the rings are respectively ～454 nm and ～1 μm. Triangles with three unequal sides having a thickness of ～143 nm and a width of ～1 μm were also formed. The crystalline orthorhombic phase of shcherbianite V(2)O(5) was obtained on calcination of (NH(4))(0.5)V(2)O(5)·mH(2)O at 350 °C for 2 h. The SEM image of this V(2)O(5) product retains the parent morphology of the preheated compound. A possible reaction mechanism and the growth process involved in the formation of belts/rings/triangles and ovallike microstructures are discussed.     

Electrospun V2O5 nanostructures with controllable morphology as high-performance cathode materials for lithium-ion batteries

Porous V(2)O(5) nanotubes, hierarchical V(2)O(5) nanofibers, and single-crystalline V(2)O(5) nanobelts were controllably synthesized by using a simple electrospinning technique and subsequent annealing. The mechanism for the formation of these controllable structures was investigated. When tested as the cathode materials in lithium-ion batteries (LIBs), the as-formed V(2)O(5) nanostructures exhibited a highly reversible capacity, excellent cycling performance, and good rate capacity. In particular, the porous V(2)O(5) nanotubes provided short distances for Li(+)-ion diffusion and large electrode-electrolyte contact areas for high Li(+)-ion flux across the interface; Moreover, these nanotubes delivered a high power density of 40.2?kW?kg(-1) whilst the energy density remained as high as 201?W?h?kg(-1), which, as one of the highest values measured on V(2)O(5)-based cathode materials, could bridge the performance gap between batteries and supercapacitors. Moreover, to the best of our knowledge, this is the first preparation of single-crystalline V(2)O(5) nanobelts by using electrospinning techniques. Interestingly, the beneficial crystal orientation provided improved cycling stability for lithium intercalation. These results demonstrate that further improvement or optimization of electrochemical performance in transition-metal-oxide-based electrode materials could be realized by the design of 1D nanostructures with unique morphologies.     

Synthesis, field-emission and electric properties of metastable phase VO2 (A) ultra-long nanobelts

High quality single crystalline metastable phase VO(2) (A) ultra-long nanobelts were synthesized by hydrothermal method using inorganic V(2)O(5) sol as precursor and polyethylene glycol (PEG) as both surfactant and reducing agent. It was found that the oriented attach growth mechanism is responsible for the formation of VO(2) (A) nanobelts. In addition to an endothermic peak, an unusual exothermic peak was detected in DSC curve of the nanobelts. The temperature dependence of the lattice parameters have been studied, and it was found that the a-axis expands while the c-axis contracts in the high-temperature XRD test. The VO(2) (A) nanobelt has a low turn-on field of 3.8 V μm(-1) and a high field enhancement factor of 1739 in the field emission measurement. Electrical transport measurement of a single VO(2) (A) nanobelt gives a relative low hoping activation energy of 0.28 eV.     

A simple and direct method for synthesis of vanadium oxide ribbon-like manobelts

A low-cost, a high-yielding of vanadium oxide nanobelts 2 was simply synthesized by hydrothermal treatment of our (NH₄)₂V₃O₈, 1, with deionized water at 200 °C for 3 days. The SEM observations show that ribbon-like nanobelts are about 150–300 nm wide and thousands of nanometers long. The XRD pattern reveals a set of the paper form reflections, characteristic of (001) reflections for layered phases. Based on FT-IR results and the EDX spectra, the chemical formula of the as-obtained ribbon-like could be described as V_xO_y.nH₂O with a mixed valence V(V) and V(IV).     

基于插层化学的单晶氧化钨纳米片的制备、表征与形成机制

结合插层化学与湿化学方法的优点, 建立了一种高比表面积、大径厚比、易分散的二维氧化钨(WO3)纳米片单晶的制备新方法. 微米级WO3与Bi2O3在800 ℃通过固相反应生成层状化合物Bi2W2O9; 所得到的Bi2W2O9经盐酸选择性溶出[Bi2O2]层后得到质子化形式的H2W2O7·xH2O相. 以H2W2O7·xH2O为钨源, 以辛胺插层所得无机-有机混杂纳米带为前驱物, 经硝酸氧化除去前驱物中的有机组分后得到正交相WO3·H2O纳米片; 将所得到的WO3·H2O纳米片在250~ 450 ℃和空气气氛中热处理2~5 h(升温速率为2 ℃/min), 得到单斜相WO3单晶纳米片. TEM与SEM分析结果表明, 单晶WO3·H2O与WO3纳米片的形貌相似, 其大小为(200~500) nm×(200~500) nm, 厚度为10~30 nm; 所得WO3·H2O与WO3纳米片单晶的厚度方向分别为[010]和[001]. N2吸附结果表明, WO3·H2O与WO3纳米片的比表面积分别可达到250与180 m2/g.     

硼酸镁纳米带的制备、结构和生长机理

以晶态B和纳米MgO粉末为原料, 在1100 ℃含水的气氛下反应制备了新型准一维纳米材料硼酸镁纳米带. 采用多种表征方法, 如X射线衍射(XRD), 扫描电镜(SEM), 透射电镜(TEM), 能量色散谱仪(EDS)和傅立叶红外(FT-IR)等, 研究了产物的形貌和结构. 结果表明, 除了部分附着的Mg₂B₂O₅颗粒外, 产物主要为单晶的Mg₃B₂O₆纳米带. 其宽度在100～200 nm, 长度达到几十微米, 生长方向大致为[010]方向. 简要讨论了硼酸镁纳米带的生长机理和反应温度对产物的影响.     

Narrow pore-diameter polypyrrole nanotubes

Bulk quantities of electrically conducting nanotubes of polypyrrole having narrow pore diameter (6 nm) can be synthesized rapidly by chemical oxidative polymerization of pyrrole in the presence of stoichiometric amounts of V2O5 nanofibers. The V2O5 nanofibers act as templates for polymerization and yield, as the initial product, polypyrrole nanotubes with pores filled with V2O5. The V2O5 dissolves readily in aq. 1.0 M HCl, yielding hollow polypyrrole nanotubes having conductivity of approximately 2 S/cm. As-synthesized polypyrrole nanotubes spontaneously reduce noble metal ions to the corresponding metal nanoparticles at room temperature without any capping or dispersing agents. For example, 3-5 nm size nanoparticles of Ag, Au, and Pd, etc., deposit readily on the surface of the tubes which then migrate spontaneously to the pore, and, in the case of Ag, coalesce in the core, yielding 4-8 nm diameter coaxial cables of Ag surrounded by a 20-30 nm thick polypyrrole fiber sheath.     

Preparation and Characterization of Cu3V2O7(OH)2·2H2O Hollow Spheres from NazV6O16·3HzO Nanobelts

Monoclinic Cu3V2O7(OH)2·2H2O(copper polyvanadate) hollow spheres were prepared with Na2V6O16·3H2O nanobelts as V-precursor by hydrothermal method.The purity and structure of the products were characterized by X-ray powder diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,Raman spectroscopy,thermogravimetric analysis(TGA) and X-ray photoelecton spectroscopy(XPS).The morphology and size were observed by scanning electron microscopy(SEM).We found that the Kagomé staircase-structural copper polyvanadate hollow spheres with an average diameter of 7 μm could be easily synthesized via the reaction of Na2V6O16·3H2O nanobelts with sufficient copper sulfate.The dielectric property of the copper polyvanadate demonstrates that dielectric loss hardly changes when the frequency of applied electric field is higher than 100 kHz.The formation process of the hollow spheres is discussed in detail by the observation of a series of products prepared for different reaction time.     

Electronic spectra of pure uranyl(V) complexes: characteristic absorption bands due to a U(V)O2+ core in visible and near-infrared regions

To clarify the electronic spectral properties of uranyl(V) complexes systematically, we measured absorption spectra of three types of pure uranyl(V) complexes: [U(V)O2(dbm)2DMSO]-, [U(V)O2(saloph)DMSO]-, and [U(V)O2(CO3)3]5- (dbm = dibenzoylmethanate, saloph = N,N'-disalicylidene-o-phenylenediaminate, DMSO = dimethyl sulfoxide). As a result, it was found that these uranyl(V) complexes have characteristic absorption bands in the visible-near-infrared (NIR) region, i.e., at around 640, 740, 860, 1470, and 1890 nm (molar absorptivity, epsilon = 150-900 M(-1).cm(-1)) for [U(V)O2(dbm)2DMSO]-, 650, 750, 900, 1400, and 1875 nm (epsilon = 100-300 M(-1).cm(-1)) for [U(V)O2(saloph)DMSO]-, and 760, 990, 1140, 1600, and 1800 nm (epsilon = 0.2-3.6 M(-1).cm(-1)) for [U(V)O2(CO3)3]5-. These characteristic absorption bands of the uranyl(V) complexes are attributable to the electronic transitions in the U(V)O2+ core because the spectral features are similar to each other despite the differences in the ligands coordinated to the equatorial plane of the U(V)O2+ moiety. On the other hand, the epsilon values of [U(V)O2(CO3)3]5- are quite smaller than those of [U(V)O2(dbm)2DMSO]- and [U(V)O2(saloph)DMSO]-. Such differences can be explained by the different coordination geometries around the center uranium in these uranyl(V) complexes. Consequently, the absorption bands of the uranyl(V) complexes in visible-NIR region were assigned to f-f transitions in the 5f1 configuration.     

Preparation of Single Crystalline V6O13 Nanobelts

Ultralong beltlike nanostructures was successfully synthesized for V6O13 crystal by a hydrothermal route. The products are characterized by means of X-ray powder diffraction, transmission electron microscopy and high-resolution transmission electron microscopy. The experimental results give the evidence that the V6O13 nanobelts are pure, structurally uniform and single crystalline, with typical widths of 50 to 300 nm and lengths of up to a few millimeters.     

图案化锥形氧化锌纳米带的原位热氧化法制备与发光性质

采用光刻技术制备出图案的锌膜,所得锌膜与纯氧在700℃氧化反应10 min,在锌膜的表面上原位生长出具有图案的锥形ZnO纳米带阵列,实现了ZnO纳米带生长位置的可控生长。锌膜上得到的锥形ZnO纳米带为单晶六方纤锌矿结构,长度在1～4μm,纳米带根部和顶部的宽度分别在300～700 nm和100～300 nm。提出了锥形ZnO纳米带的可能生长机理。在波长为300nm光的激发下,发现了锌膜上锥形ZnO纳米带具有发光峰位于395 nm弱的紫外光发光和510 nm强的蓝绿光发光,它们分别起源于ZnO宽带隙的激子发射以及表面上离子化氧空位中的电子与价带中光激发的空穴之间的复合。     

Crystal structure of a novel two-dimensional supramolecular network based on polyoxoanion and yttriumIII coordination cation

A novel compound (NH4)2Y(H2O)8[PMo10V2O40]·10H2O has been prepared in an aqueous solution and characterized by elemental analysis, IR, and TG-DTG analysis. X-ray diffraction analysis was carried out on (NH4)2Y(H2O)8 [PMo10V2O40]·10H2O single crystal, which crystallizes in the monoclinic system of a space group P21/c with a=0.9871(3) nm,b=1.5424(5) nm, c=2.7924(9) nm, β= 94.183(5)° and Z=2. In the compound, a two-dimensional network is constructed by the PMo10V2O54-0 anion and the Y(H2O)83+ cation building blocks via hydrogen bonding exhibiting the porous structure.     

一维链状配位聚合物[Cu(en)2]2[Cu(en)2·α-AsⅢ8VⅣ14O42(HPO4)]·8H2O的合成与晶体结构

通过在As-V反应体系中加入H3PO4制得了内含HPO2-4基团的[As8V14O42(HPO4)]6-笼, 并对其结构进行了表征.     

Hydrothermal Synthesis of Na0.28V2O5 Nanobelts and their Electrochemical Behavior in Lithium Batteries

A simple low temperature hydrothermal method was found to yield Na_0.28V₂O₅ nanobelts after two days at 130 °C in acidic medium (H₂SO₄) without using any surfactant. The obtained products were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), and Raman spectroscopy. Their morphology was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Additionally, their electrochemical behavior in a lithium battery was investigated. The XRD pattern shows that the product is composed of monoclinic Na_0.28V₂O₅ nanobelts. From the FTIR spectrum, the band centered at 961 cm^–1 is assigned to V=O stretching vibration, which is sensitive to intercalation and suggests that Na⁺ ions are inserted between the vanadium oxide layers. SEM/TEM analyses reveal that the products consist of a large quantity of nanobelts which have a thickness of 60–150 nm and a length of several tens of micrometers. The electrochemical results show that the nanobelts exhibit an initial discharge specific capacity of 390 mAh · g^–1, and its stabilized capacity still remained around 200 mAh · g^–1 after the 18th cycle.     

A simple and general method for the synthesis of multicomponent Na2V6O16.3H2O single-crystal nanobelts

Multicomponent Na2V6O16.3H2O (barnesite) single-crystalline nanobelts were synthesized by a direct reaction-crystallization growth of bulk V2O5 and NaF powders under hydrothermal treatment without using any templates or catalysts. This new strategy could be extended to prepare other one-dimensional multicomponent nanomaterials including ammonium, alkali-metal or alkali-earth metal vanadium oxide bronzes and other transition metal oxyfluorides. This is an efficient and mild solution method with clear advantages over the traditional high-temperature approach for the large-scale production of 1D multicomponent nanomaterials. The applicability of this approach toward the preparation of other inorganic systems, such as tungstates and molybdates, will be explored.     

Sonochemical route for self-assembled V2O5 bundles with spindle-like morphology and their novel application in serum albumin sensing

Novel self-assembled V2O5 bundles with highly ordered superstructures and spindle-like morphology were synthesized by a rapid high-yielding sonochemical method. The as-prepared samples were characterized by X-ray diffraction, a field-emission scanning electron microscope, and a transmission electron microscope. The spindle-like V2O5 bundles are composed of several tens of homogeneous nanowires with diameters of 30-50 nm and lengths of 3-7 microm. A sensitive resonance light scattering method for the detection of bovine serum albumin (BSA) based on the self-assembled V2O5 bundles was developed. The results of the polarized resonance light scattering demonstrated that the Cabannes factor for the V2O5 bundles-BSA aggregates was BSA concentration-dependent.     

Self-coiling of Ag2V4O11 nanobelts into perfect nanorings and microloops

Free-standing Ag2V4O11 nanorings and microloops have been synthesized by a simple hydrothermal process without any template or surfactant. The Ag2V4O11 nanorings and microloops have preferred growth direction along the [30] plane and are formed by the self-rolling of Ag2V4O11 nanobelts.