Effect of the polymer nature on the structural organization of lipid/polymer particle assemblies

The nano-organized LipoParticle assemblies, consisting of polymer particles coated with lipid layers, are investigated with the aim of evidencing the impact of the particle chemical nature on their physicochemical behavior. To this end, these colloidal systems are elaborated from anionic submicrometer poly(styrene) (P(St)) or poly(lactic acid) (PLA) particles, and lipid mixtures composed of zwitterionic 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC) and cationic 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP). As revealed by various experimental techniques, such as quasielastic light scattering, zeta potential measurements, transmission electron microscopy, and 1H NMR spectroscopy, the features of both LipoParticle systems are similar when cationic lipid formulations (DPPC/DPTAP mixtures) are used. This result emphasizes the major role of electrostatic interactions as driving forces in the assembly elaboration process. Conversely, the assemblies prepared only with the zwitterionic DPPC lipid are strongly dependent on the particle chemical nature. The structural characteristics of the assemblies based on PLA particles are not controlled and correspond to aggregates, contrary to P(St) particles. To understand this specific phenomenon, and to consequently improve the final organization of these assemblies which are potentially of great interest in biotechnology and biomedicine, numerous investigations are carried out such as the studies of the impact of the ionic strength and the pH of the preparation media, as well as the presence of ethanol (involved in the PLA particle synthesis) or the mean size of the lipid vesicles. From the resulting data and according to the nature of spherical solid support, hydrophobic effects, hydrogen bonds, or dipole-dipole interactions would also appear to influence the LipoParticle elaboration in the case of zwitterionic lipid formulation.     

Combined SPM investigation on the interfacial structure of a phthalocyanine/conjugated polymer composite film

The morphology of the composite film of organic semiconductors determines the properties and performances of devices to a large extent. In this work, we present a combined AFM and STM study on the interfacial structures of CuPcOC8 and CuPcOC8/PmPV composite films on graphite surface. For CuPcOC8 thin films, the face-on epitaxial growth of CuPcOC8 could persist within 3 to 5 monolayers and the formation of π-π stacked columns will occur with edge-on configuration when the film thickness further increases. For the CuPcOC8/PmPV composite film with 1:1 weight ratio, STM results reveal a preferential adsorption of PmPV on graphite surface, while AFM results indicate the phase segregation in the upper layer. STM also reveals in the molecular scale good compatibility of CuPcOC8 with PmPV.     

Improved interfacial adhesion of membrane electrode assemblies using polymer binders and pore-filling membranes in alkaline membrane fuel cells

The development of alkaline membrane fuel cells (AMFCs) will enable the use of non-platinum catalysts and hydrocarbon-based electrolyte membranes. Such catalysts are intrinsically stable and have activities similar to that of platinum in an alkaline environment. A pore-filling membrane has been made from a porous, high-density polyethylene substrate to fabricate durable, AMFC membrane electrode assemblies (MEAs). Because of the low binding ability of the hydrocarbon ionomer in the preparation of AMFC MEAs, polymer binders were added to the catalyst slurries to form a firmly bound interface. A content of 20 wt% polyethylene (PE) binder, the same material as the porous substrate in the pore-filling membrane, exhibits the best attachment of the non-platinum catalyst particles to the pore-filling, hydrocarbon anion-exchange membranes. The addition of a PE binder improves adhesion at the MEA interface and diminished contact resistance. The improved durability of the MEA is confirmed by continuous, constant-voltage operation. Adhesion between the cathode catalyst layer and the pore-filling membrane is also investigated after mild hot-pressing to test the use of decal method in the fabrication of AMFCs. The catalyst layer with the PE binder was completely transferred to the pore-filling membrane at 50 °C and 30 bar?cm^?2, but not for the PTFE binder.     

Polymerization of organized polymer assemblies

Supramolecular chemistry has provided the means by which to selectively assemble small and large molecules into intricate two- and three-dimensional nanostructures. The past 2 years have witnessed considerable increase in extending such self-assembled structures into stable, single macromolecular nano-objects, through intra-assembly covalent bond formation. The selective polymerization of specific domains within organized polymer assemblies allows for the preparation of crosslinked, nanostructured bulk or particulate materials, with a variety of possible morphologies and properties.     

Dendritic surface functionalization of biodegradable polymer assemblies

The functionalization of nanomaterials with dendritic surface moieties was recently demonstrated to be an effective means of displaying biological ligands and potentially modulating the biological properties of these materials. With the aim of extending this surface functionalization approach to biodegradable polymer assemblies, poly(ethylene oxide)‐polycaprolactone (PEO‐PCL) block copolymers with terminal azide or methoxy groups were prepared and were assembled to form micelles or vesicles with varying loadings of surface azides. Dendrons bearing peripheral amines, guanidines, or hydroxyls were prepared and conjugated to the assemblies, and the conjugation yields were measured and compared as a function of azide loading and assembly type (micelle versus vesicle). A small molecule rhodamine derivative was also conjugated, allowing the effect of sterics to be studied. The effects of the surface functionalization on the aggregation state of the assemblies were studied by light scattering and transmission electron microscopy. Overall, the results revealed interesting differences between the two systems with respect to both the reaction yields and the stabilities. Furthermore, micelles functionalized with dendrons bearing peripheral guanidines were found to exhibit enhanced cell uptake relative to control micelles, demonstrating that this approach can be used to modulate the biological properties of the materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Mesoscopic pattern formation of nanostructured polymer assemblies

Hierarchical mesoscopic structures of the nanoscopic supramolecular assemblies, which consist of polyelectrolytes and bilayer-forming amphiphiles, are prepared by a simple and new solvent-casting method. Submicron scale 2-D structures, e.g. regular dots, stripes, and networks, are formed when highly diluted organic solutions of polymer assemblies are cast on solid surfaces. Dynamic mesoscopic regular structures, the so-called ‘dissipative structures’, formed in the non-equilibrium processes of solvent-casting are fixed as hierarchically structured polymer assemblies.     

Bulk and interfacial properties of binary polymer mixtures

A microscopic density functional theory is used to investigate a binary mixture of polymers, built of freely jointed tangent hard spheres. The difference in the chain length and in the segment diameter of polymers gives rise to a demixing transition. We evaluate the bulk fluid phase equilibria (binodal) and the limit of stability of a mixed state (spinodal) for selected systems, and analyze the decay of the critical packing fraction, critical mole fraction, and critical pressure with an increase of the chain length. The bulk results are subsequently used in the calculations of the density profiles across the fluid-fluid interface. The obtained profiles are smooth and do not exhibit any oscillations on the length scale of the segment diameter. Upon approaching the critical point the interfacial tension vanishes as (Deltarho)3, where Deltarho is the difference between bulk densities of one component in bulk phases rich and poor in that species. This indicates that the microscopic density functional theory applied here is of a mean-field type.     

Physicochemical properties of nevirapine-loaded solid lipid nanoparticles and nanostructured lipid carriers

Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) coated with human serum albumin (HSA) were fabricated for formulating nevirapine (NVP). Here, NLCs contained low-melting-point oleic acid (OA) in the internal lipid phase. The results revealed that the two nanoparticles were uniformly distributed with the average diameter ranging from 145 to 180 nm. The surface HSA neutralized the positive charge of dimethyldioctadecyl ammonium bromide (DODAB) on SLNs and NLCs and reduced their zeta potential. In a fixed ratio of solid lipids, SLNs entrapped more NVP than NLCs. The incorporation of OA also reduced the thermal resistance of NLCs and accelerated the release of NVP from the nanocarriers. When incubated with DODAB-stabilized SLNs, the viability of human brain-microvascular endothelial cells (HBMECs) reduced. However, the surface HSA increased the viability of HBMECs about 10% when the concentration of SLNs was higher than 0.8 mg/mL. HSA-grafted SLNs and NLCs can be effective formulations in the delivery of NVP for viral therapy.     

Healing of interfacial surfaces in polymer systems

Literature data on the problems related to the healing of interfacial surfaces in polymers are revisited. Specific features and behavior of the contacting surfaces of polymer films in the rubbery and glassy states, as well as in heterophase polymer systems, are analyzed. Particular details associated with the healing of interfacial surfaces in polymers, which are capable of chemical interactions with each other, are considered. Special attention is focused on the analysis of the phenomena taking place on the newborn interfaces formed owing to the deformation of polymers in different physical states. Processes providing healing of shear bands and crazes during annealing of deformed polymer glasses are discussed. The above phenomena are shown to present evident practical interest from the viewpoint of the development of advanced nanocomposites based on polymer matrices.     

Surface-guided templating of particle assemblies inside drying sessile droplets

The particles suspended inside evaporating sessile droplets can be assembled into microscopic objects with long-ranged ordered structure. The air-water droplet interface guides the assembly and determines the shape of the resulting micropatches. We report the results of a systematic study of the mechanism of interface-templated assembly on substrates of controlled contact angle. The kinetics of drying were examined by measurements of droplet profiles, and it was found that the rate matched diffusion-limited evaporation well. The shape of the droplets and of the resulting assemblies was correlated to the dynamics of the receding contact line. The effects of major parameters controlling the process, including contact angle, particle concentration, and electrolyte, were investigated in detail. A variety of micropatch shapes were observed and categorized within the parameter space. The in-depth characterization of the process allowed the optimization of the assembly and the formulation of protocols for the deposition of nanostructured patches of different diameter, thickness, and shape.     

基底界面效应对聚苯乙烯薄膜分子运动行为的影响

本文研究了Si／Si02、Si／Si—H基底与聚苯乙烯（Ps）之间的界面相互作用对Ps薄膜的玻璃化转变及相关力学性能的影响．结果显示,无论何种基底,Ps薄膜的玻璃化转变温度（L）都随其厚度降低而降低．但相同厚度（〈110nm）下,以Si／Si-H为基底时Ps薄膜的瓦比以Si／Si02为基底的PS薄膜高．Si／Si02表面Ps薄膜疋开始下降的临界厚度为110nm,远高于以Si／Si—H为基底时的40nm．对Ps薄膜的膨胀系数和弹性模量进行研究,也得到相似的临界厚度．另外,与Si／Si02基底相比,在Si／Si-H上的Ps薄膜具有更低的膨胀系数以及较高弹性模量．可能原因是Si／Si-H与Ps具有较强的相互作用,限制了该界面分子的运动能力,导致基底／PS界面效应对薄膜分子运动的影响力增强,造成该薄膜瓦的厚度依赖性下降,并呈现出相对较硬的力学特征．     

Fluorescence of polymers: A probe of polymer assemblies

In this paper we discuss some general aspects of the use of fluorescence spectroscopy in the characterization of polymers and processes involving polymers. In particular we focus on the use of probes to detect formation of hydrophobic domains or to detect environmental changes because of solvation or pH changes, fluorescence quenching to determine the accessibility of the probe to solution phase small molecules, the use of fluorescence depolarization to characterize segmental motions and the use of energy transfer to characterize morphologies on the length scale of 1-5 nm. We also will compare direct energy transfer (DET) with down-chain electronic energy transfer (EET).     

Evanescent-wave cavity ring-down investigation of polymer/solvent interactions

Evanescent-wave cavity ring-down spectroscopy (EW-CRDS) is used to measure interfacial phenomena when methanol or water is placed in contact with a film of poly(dimethylsiloxane) (PDMS), which is attached to the face of a fused-silica prism that constitutes part of a ring cavity. In the first few minutes after contact, the uptake of methanol is slower than that of water, but after this initial period the methanol diffuses more rapidly in the film than water does. Bulk weight-gain measurements confirm this result and yield diffusion coefficients of (25.1 +/- 0.7) x 10(-7) cm(2)/s for methanol in PDMS and (7 +/- 2) x 10(-7) cm(2)/s for water in PDMS. The interfacial optical losses found in the EW-CRDS measurements result primarily from scatter. In particular, we find that delamination of the film from the fused-silica substrate dominates the optical losses in the case of methanol. This conclusion is confirmed by separate surface plasmon resonance experiments.     

Bivalent cholesterol-based coupling of oligonucletides to lipid membrane assemblies

By mimicking Nature's way of utilizing multivalent interactions, we introduce in the present work a novel method to improve the strength of cholesterol-based DNA coupling to lipid membranes. The bivalent coupling of DNA was accomplished by hybridization between a 15-mer DNA and a 30-mer DNA, being modified with cholesterol in the 3' and 5' end, respectively. Compared with DNA modified with one cholesterol moiety only, the binding strength to lipid membranes appears to be significantly stronger and even irreversible over the time scale investigated ( approximately 1 hr). First, this means that the bivalent coupling can be used to precisely control the number of DNA per lipid-membrane area. Second, the strong coupling is demonstrated to facilitate DNA-hybridization kinetics studies. Third, exchange of DNA between differently DNA-modified vesicles was demonstrated to be significantly reduced. The latter condition was verified via site-selective and sequence-specific sorting of differently DNA-modified lipid vesicles on a low-density cDNA array. This means of spatially control the location of different types of lipid vesicles is likely to find important applications in relation to the rapid progress currently made in the protein chip technology and the emerging need for efficient ways to develop membrane protein arrays.     

Dynamic surface and interfacial tensions of surfactant and polymer solutions

Dynamic surface and interfacial tensions are the most frequently measured non-equilibrium properties of adsorption layers at liquid interfaces. The review presents the theoretical basis of adsorption kinetics, taking into consideration different adsorption mechanisms, and specific experimental conditions, such as liquid flow and interfacial area changes. Analytical solutions, if available, approximations as well as numerical procedures for direct solution of the physical models are presented.Several experimental techniques are discussed frequently used in studies of the dynamic adsorption behaviour of surfactants and polymers at liquid interfaces: drop volume, maximum bubble pressure, and pendent drop technique, drop pressure tensiometry, pulsating bubble and elastic ring method. Experimental results, most of all obtained with different technique on one and the same surfactant system, are then discussed on the basis of current theories.Finally, the role of dynamic interfacial properties in several practical applications is discussed: foam and emulsion film formation and stabilisation, rising of bubbles and drops in a surfactant solution.     

Characteristics of interfacial layers of polymer composite materials

Design diagrams are given based on which engineering models are developed allowing one to calculate the characteristics of interfacial layers of polymer composite materials are given. Theoretical and experimental investigations of interfacial layer thicknesses are comparatively evaluated.     

Challenges and rewards of the electrosynthesis of macroscopic aligned carbon nanotube array/conducting polymer hybrid assemblies

Hybrid assemblies based on conducting polymers and carbon nanomaterials with organized nanoscale structure are excellent candidates for various application schemes ranging from thermal management to electrochemical energy conversion and storage. In the case of macroscopic samples, however, precise control of the nanoscale structure has remained a major challenge to be solved for the scientific community. In this study we demonstrate possible routes to homogeneously infiltrate poly(3‐hexylthiophene), poly(3,4‐ethylenedioxythiophene), and polyaniline into macroscopic arrays of vertically aligned multiwalled carbon nanotubes (MWCNTAs). Electron microscopic images and Raman spectroscopic analysis (performed along the longitudinal dimension of the hybrid samples) both confirmed that optimization of the electropolymerization circumstances allowed fine tuning of the hybrid structure towards the targeted application. In this vein, three different application avenues were tested. The remarkable anisotropy in both the electrical and thermal conductivity of the nanocomposites makes them eminently attractive candidates to be deployed in thermal management. Thermoelectric studies, aimed to understand the effect of organized nanoscale morphology on the important parameters (Seebeck coefficient, electrical‐, and thermal conductivity) compared to their non‐organized hybrid counterparts. Finally, extraordinary high charge storage capacity values were registered for the MWCNTA/PANI hybrids (500 F g^?1 and 1–3 F cm^?2). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1507–1518     

Physicochemical properties of low-dimension systems: Micellar solutions of surfactants and surfactant/polymer complexes

As shown in theoretical papers [1] and confirmed by experiments, the transport coefficients in micellar aqueous solutions exhibit a number of anomalies (minima and maxima in the concentration dependences). The studies revealed the existence of four critical micellization concentrations. At approximately 30°C, the critical micellization concentrations have a minimum. Measurements of the dynamic surface tension furnish information on surfactant/polymer complexation.