苯并噻吩在酸改性NaY分子筛上的吸附

以NaY分子筛为母体,通过柠檬酸、磷酸改性分别得到吸附剂NaY-C和NaY-P.采用SEM、XRD、XRF、N₂物理吸附及NH₃-TPD表征可知,柠檬酸改性后得到的NaY-C吸附剂介孔表面积增加,分子筛骨架结构保持不变.同时,磷酸改性使得NaY分子筛表面弱酸量减少强酸量增加,改性后所得吸附剂NaY-P的强酸量大于NaY-C.吸附实验表明,NaY-C和NaY-P均可完全脱除模拟油品中的苯并噻吩,同时NaY-C吸附剂对0^#柴油的脱硫能力优于NaY-P吸附剂.再生实验中NaY-C和NaY-P吸附剂对模拟油品的脱硫率由第一次的100%分别下降至第6次的91.97%和85.96%.由此可知,柠檬酸改性NaY分子筛所得NaY-C吸附剂的脱硫能力优于NaY-P,原因是吸附剂上的介孔更易于发生吸附脱硫.     

ADSORPTION OF LATERALLY INTERACTING 1-NAPHTHOL/1-NAPHTHYL-AMINE MIXTURES ON NONPOLAR SURFACES FROM AQUEOUS SOLUTIONS

The binary adsorption behavior of 1-naphthol/1-naphthylamine mixtures in water on nonpolar adsorbent Amberlite XAD4 was investigated at 293 K,303 K and 313 K,respectively.The experimental uptakes of 1-naphthol and l-naphthylamine in all binary-component systems of different molar ratios were obviously higher than the corresponding uptakes predicted by the extended Langmuir model,assuming no interaction between the adsorbed molecules of the two components.This phenomenon was attributed to the cooperative adsorption effect arising from the hydrogen bonding interaction between l-naphthol and l-napbthylamine molecules.A modified extended Langmuir model was proposed to describe the binary adsorption behavior by means of introducing a fitting parameter related with the cooperative adsorption effect of the adsorbates.     

Thermal behaviour of the system Fe(NO3)3?·?9H2O–Bi5O(OH)9(NO3)4?·?9H2O–glycine/urea and of their generated oxides (BiFeO3)

Activated carbons (AC), particularly those containing sulphur, are effective adsorbents for mercury (Hg) vapour at elevated temperatures. Activated carbon-based technologies are expected to become a major part of the strategy for controlling mercury emission from coal-fired power plants. Understanding the mechanism of mercury adsorption on sulphur impregnated activated carbons (SIAC) is essential to optimizing activated carbons for better mercury removal efficiency and to developing technologies for the handling of the spent AC. In this work thermal analysis before and after mercury uptake was carried out for the SIAC prepared under various conditions from oil-sand petroleum coke using a simultaneous differential thermal analyzer. Samples were heated at 20°C min⁻¹ under nitrogen in the temperature range from ambient to 1000°C. The DSC curves suggest both endothermic and exothermic changes during heating. The endothermic processes were attributed to evaporation of moisture and other volatile components. The exothermic processes existed in a wide temperature range of 150–850°C likely due to the oxidation reactions between carbon and adsorbed oxygen, oxygen-containing surface groups. The enthalpies of liquid mercury interaction with SIAC at different Hg/AC mass ratio were also measured at 30, 40 and 50°C using a differential scanning calorimeter. The combination of thermal analysis and calorimetry techniques enabled confirmation that the interaction of mercury with SIAC involves both physical and chemical processes.     

对二氯苄-聚乙烯咪唑型聚合离子液体的制备及对煤焦油中苯酚的吸附性能

以1-乙烯咪唑和1,4-对二氯苄为原料, 通过自由基聚合和季铵化交联反应, 制得了一种新型聚合离子液体吸附剂——聚乙烯基苄基咪唑氯(P[VBnim]Cl), 并用元素分析、 凝胶渗透色谱、 红外光谱、 扫描电子显微镜、 物理吸附分析仪及热重分析等方法对其组成、 结构、 颗粒形貌、 比表面积、 孔结构及热稳定性进行了表征. 结果表明, P[VBnim]Cl 结构中对二氯苄与乙烯咪唑的摩尔比约为1∶3; 产物为米黄色蓬松粉末, 易吸水, 其初始颗粒直径为50~80 nm, 比表面积为13.86 m²/g, 平均孔径9.94 nm, 属于介孔结构材料, 初始热分解温度为274 ℃, 具有较好的热稳定性. 同时, P[VBnim]Cl对中低温煤焦油模型油中的苯酚具有优异的吸附性能, 其吸附能力是活性炭的2~10倍, 该吸附剂用乙酸乙酯再生后, 吸附效果仍然较好, 可以循环使用.     

Structure, stability, and activity of myoglobin adsorbed onto phosphate-grafted zirconia nanoparticles

The adsorption of myoglobin (Mb) onto phosphate grafted-zirconia (ZrO2-P) nanoparticles was studied in terms of conformational studies and thermal stability, determined by circular dichroism (CD), differential scanning calorimetry (DSC), and atomic force microscopy (AFM). The changes in protein structure have been correlated with the catalytic activity of free and adsorbed Mb. CD and DSC studies indicate marked rearrangements in Mb structure upon adsorption onto phosphate-grafted zirconia nanoparticles. These structural rearrangements of Mb could be responsible for the loss of catalytic activity observed for the adsorbed Mb. In particular, the conformational changes due to the adsorption process induced a reduction of kcat and KM. AFM measurements indicate that the interaction with the grafted-zirconia nanoparticles also affects the morphology of the bound protein, inducing the nucleation of prefibrillar-like aggregates.     

甲烷在石墨化热解碳黑和活性炭上的吸附

为研究影响碳基吸附剂吸附超临界温度气体的主要因素,选择石墨化热解碳黑BP280和Ajax活性炭,分析超临界温度高压甲烷在其上的吸附平衡。应用容积法,在压力0~20.5 MPa、温度253 K~313 K测定甲烷的吸附平衡数据,并由等量吸附线标绘和亨利定律常数确定等量吸附热。引入通用吸附等温方程,再由方程的Langmuir标绘确定最大吸附容量,进而通过方程的线性化计算吸附平衡态中甲烷分子的作用能。结果表明,甲烷在两种吸附剂上的最大吸附容量均随温度而变化,并都小于液态甲烷的密度;甲烷在碳黑和活性炭上的等量吸附热分别为11.9 kJ/mol~12.5 kJ/mol和17.5 kJ/mol~22.5 kJ/mol,体现了两种吸附剂不同的表面能量分布;甲烷分子间作用能随吸附量的变化特点反映了超临界温度甲烷以类似于压缩气体状态聚集的特点和吸附剂结构上的差异。碳基吸附剂的比表面积和微孔容积是影响其储存甲烷容量的重要因素。     

Measurement of adsorption energy between a solid adsorbent and a liquid adsorbate using differential scanning calorimetry

We report on a novel method involving the use of differential scanning calorimetry (DSC) in evaluation of adsorption energy between a liquid adsorbate and a solid adsorbent. The proof of concept is demonstrated by measuring the exothermic heat release due to the adsorption of automotive transmission fluid (ATF), the adsorbate, to a paper-based friction material used in automotive torque converters, the adsorbent. The novelty of the measurement technique involves initial freezing of the liquid adsorbate so that the initiation of the adsorption process can be identified. Our experimental results and theoretical calculations reveal that the adsorption energy of the friction paper and the summation of adsorption energies of each friction paper ingredient are in good agreement.     

硅沸石完美骨架上的吸附Ⅲ.氯氟烃在MFI和FAU上的吸附热

测定不同温度下三种氯氟烃F-11(CFCl3),F-12(CF2Cl2)和F-22(CHF2Cl)在疏水高硅MFI和FAU沸石上的吸附等温线,以研究其吸附热效应。根据Clapeyron-Clausius方程,由吸附等温线,计算不同覆盖度C的等量吸附热Qst(C)和平均吸附热Qst^*(△Ha)。上述吸附质在两种沸石上吸附热的大小顺序均为：△Ha(MFI)＞△Ha(FAU)。在同种沸石上,吸附热的大小顺序为：△Ha(F-11)＞△Ha(F-12)＞△Ha(F-22).298K时的吸附等温线和△Ha的变化趋势显示,对能允许氯氟烃分子自由进出其孔道的FAU沸石,吸附质分子越大,低分压吸附量(V)越大,吸附热(△Ha)也越大。而孔道对吸附质分子有空间限制作用的MFI沸石,其吸附热、分子尺寸与饱和吸附量(Vm)间关系比较复杂。选择去除氯氟烃的沸石吸附剂应综合考虑△Ha与饱和吸附容量Vm。     

Alumina catalyzed reactions of amino acids

Thermal reactions of glycine (Gly), alanine (Ala), leucine (Leu), valine (Val) and proline (Pro) adsorbed on activated alumina were studied by means of thermal analysis. In the absence of alumina, decomposition of amino acids was detected as a sharp endotherm above 200°C, whereas no thermal effects were detectable by differential thermal analysis (DTA) and differential scanning calorimetry (DSC) for amino acid/alumina mixtures. This could be explained by a continuous amino acid condensation to peptides and simultaneous absorption of formed water by alumina, the latter being gradually released at higher temperatures. Thermogravimetry (TG) and differential thermogravimetry (DTG) measurements revealed that the reactions of the amino acids adsorbed on alumina surface were spread over a wide range of temperatures. The catalysis of peptide bond formation on alumina surface at 85°C was proven directly by the identification of the reaction products, mainly dipeptides and cyclic anhydrides. This revised version was published online in August 2006 with corrections to the Cover Date.     

TSDC and DSC Study of Effects of Physical Aging on Polybutylene Terephthalate (PBT)

The impact of the physical aging process on the electrical and thermal properties of semicrystalline polybutylene terephthalate (PBT) was investigated by means of thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry (DSC). The TSDC technique was used to study the relaxation modes of PBT in the temperature range ?50° to + 120°C. The obtained spectra revealed two peaks located at temperature maxima of 45° and 93°C. The peak appearing at 45°C corresponds to the dielectric manifestation of the glass transition phenomenon (α-relaxation). The aim of this work is to study the effect of physical aging on this relaxation. The recording of TSDC peaks of aged PBT at different temperatures for different times revealed a reduction in their intensities and their shift towards higher temperatures when the aging becomes significant. This result can be explained by the diminution of molecular chain mobility, which is directly related to the area under the peak representing the polarization of the sample. This result was confirmed by DSC measurements, which revealed the growth and the shift of the peak, which is superimposed on the jump of the heat capacity, located around 38°C and characteristic of the glass transition, towards higher temperatures where aging becomes significant.     

Heating rate effect on the DSC kinetics of oil shales

This research was aimed to investigate the combustion and kinetics of oil shale samples (Mengen and Himmetoğlu) by differential scanning calorimetry (DSC). Experiments were performed in air atmosphere up to 600°C at five different heating rates. The DSC curves clearly demonstrate distinct reaction regions in the oil shale samples studied. Reaction intervals, peak and burn-out temperatures of the oil shale samples are also determined. Arrhenius kinetic method was used to analyze the DSC data and it was observed that the activation energies of the samples are varied in the range of 22.4–127.3 kJ mol⁻¹ depending on the oil shale type and heating rate.     

DSC and spectroscopic investigation of human serum albumin adsorbed onto silica nanoparticles functionalized by amino groups

Human serum albumin (HSA) adsorbed onto silica nanoparticles modified by 3-aminopropyltriethoxysilane (APTES) and polyethyleneimine (PEI) was investigated by differential scanning calorimetry, IR spectroscopy, and photon correlation spectroscopy. The structural alterations of the protein molecules induced from adsorption process were estimated on the basis of temperatures of denaturation transition (T _d) of the protein in free (native) and adsorbed form. It was found that adsorption of the protein onto the APTES-modified silica nanoparticles results in an increase in the temperature of denaturation transition from 42 to 47.4 °C. HSA adsorbed onto the PEI-modified silica nanoparticles unfolds extensively.     

单宁酸与苯酚在复合功能树脂上的竞争吸附研究

研究了水源水和生化尾水中的代表性模拟背景污染物单宁酸和代表性有机毒物苯酚之间的竞争吸附行为,开展了单组分、同时竞争吸附和预负载竞争吸附实验.研究表明,单宁酸对苯酚在复合功能树脂上的吸附有显著削弱作用.竞争吸附机理包括孔堵塞和吸附质间作用:单宁酸对树脂上微孔的堵塞,减少了苯酚优势吸附位点的数量,降低了吸附剂表面的异质性;吸附质间作用削弱了树脂对苯酚的吸附作用力.     

Compatibility study of quetiapine fumarate with widely used sustained release excipients

The drug-excipient compatibility study of quetiapine fumarate, with widely used sustained release excipients, was carried out employing differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). The selected excipients were HPMC K100M, sodium alginate, xanthan gum, Eudragit RSPO, hydrogenated castor oil, carnauba wax, and PEO WSR 303. Equal proportion of drug and excipients was utilized in the interaction study. FT-IR spectra indicated the absence of interaction between drug and excipients. The DSC curve showed a sharp endothermic melting peak at 173.26 °C for quetiapine fumarate. Post melting interaction was observed for carnauba wax, Eudragit RSPO, and hydrogenated castor oil probably due to solubilization of drug in the melted excipient. No interaction was observed for other excipients. The physical mixtures stored at 30 ± 2 °C/65 ± 5% RH did not show any significant degradation of the drug. The concept of systemically conducted preformulation studies will facilitate dossier submission to the drug control authority.     

Adsorption of cyclic amines on graphitized thermal carbon black

Thermodynamic characteristics of adsorption (TCA) for aniline and its methyl derivatives on the surface of graphitized thermal carbon black (GTC, Carbopack C HT trade mark) were determined using equilibrium gas adsorption chromatography in the range of the lowest adsorbate concentrations in the gas phase. A series of relationships relating the TCA of the studied amines to their physicochemical parameters was obtained. The theoretical values of entropy of adsorption were calculated in the framework of the model of two-dimensional ideal gas and compared with the corresponding experimental values, which allowed one to reveal specific features of the molecular structure of the adsorbates. A similarity between the thermal component of entropy of the studied compounds in the adsorbed state and that of the entropy of the pure liquid adsorbates made it possible to refine the physical state and mobility of the adsorbate molecules in the force field of the adsorbent. The regression equation relating the heats of adsorption on the GTC to such molecular constants of adsorbates as polarizability, molecular surface area, and molecular weight were proposed for the first time. A high predictive power of the equations derived in the work for the preliminary estimation of the adsorption characteristics of alkylanilines and alkylbenzenes on the GTC was shown.     

Bulk and adsorbed monolayer phase behavior of binary mixtures of undecanoic acid and undecylamine: catanionic monolayers

Differential scanning calorimetry (DSC) and X-ray powder diffraction (PXRD) have been used to determine the phase behavior of the binary mixtures of undecanoic acid (A) and undecylamine (B) in the bulk. In addition, we report DSC data that indicates very similar behavior for the solid monolayers of these materials adsorbed on the surface of graphite. The two species are found to form a series of stoichiometric complexes of the type AB, A(2)B, and A(3)B on the acid rich side of the phase diagram. Interestingly, no similar series of complexes is evident on the amine rich side. As a result of this complexation, the solid monolayers of the binary mixtures exhibit a very pronounced enhancement in stability relative to the pure adsorbates.     

Adsorption desulfurization performance and mechanism over nanocrystalline NiO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-1 adsorbent

Desulfurization performance was evaluated by an adsorption model or real oil (diesel and kerosene) at low temperature using nanocrystalline NiO/Al₂O₃-1 adsorbent in static equipment. The properties of the NiO/Al₂O₃ adsorbent samples were characterized by BET surface areas, transmission electron microscopy, FTIR spectra, and TG-DTG curves. Desulfurization experimental results indicated that the desulfurization efficiency for kerosene is much higher than that for diesel due to the π-electronic interaction and S–M bonds with NiO/Al₂O₃-1 adsorbent. Also, a performance of adsorbent regeneration was kept well for multiple cycles.     

介孔硅胶在柴油氧化-吸附组合脱硫中的应用研究

以硅胶(SG)为吸附剂,采用自制的双亲催化剂与H₂O₂组成的催化氧化体系将柴油进行氧化,利用固定床动态吸附法考察了硅胶性质、氧化过程及吸附条件等对硅胶吸附脱硫性能的影响,并对硅胶进行了表征。小角XRD和氮气吸脱附结果表明,实验所用硅胶具有介孔结构。吸附脱硫实验结果表明,在油剂比(柴油与吸附剂的体积比)相同时,氧化-吸附脱硫过程脱硫率明显高于吸附脱硫过程脱硫率;选用硅胶作吸附剂,吸附温度为40℃,吸附空速为6.0 h^-1时脱硫效果较好,当油剂比为1时,脱硫率高达94.57%,且该介孔硅胶具有较大的吸附硫容,随油剂比增大下降缓慢,当油剂比增大到15时,脱硫率仍达85.89%。     

Physical Aging of Maltose Glasses as Measured by Standard and Modulated Differential Scanning Calorimetry

The physical aging characteristics of maltose glasses aged at two temperatures below the glass transition temperature, T_g, (T_g-10°C and T_g-20°C) from 5 to 10 000 min were measured by standard differential scanning calorimetry (SDSC) and modulated differential scanning calorimetry (MDSC). The experimentally measured instrumental T_g, the calculated T_g, and the excess enthalpy values were obtained for aged glasses using both DSC methods. The development of excess enthalpy as a function of aging time, as measured by both SDSC and MDSC, was fit using the Cowie and Ferguson and Tool-Narayanswamy-Moynihan models. The change in the T_g values and the development of the excess enthalpy resulting from physical aging measured by the two DSC methods are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.