Molecular structure and dynamics of poly(methacrylic acid) and poly(acrylic acid) complexes with dodecyl-substituted poly(ethylene glycol)

The molecular dynamics and the structure of molecular complexes formed by micelles of dodecyl-substituted poly(ethylene glycol) with poly(methacrylic acid) and poly(acrylic acid) in aqueous solutions were studied by viscosimetry, pH measurement, and electron spin resonance spin-probe techniques. At low surfactant concentrations, the conformation of the complex is a compact globule. The local mobility of surfactant molecules in such a complex is much slower than that in the free micelle. At high surfactant concentration, the nonionic micelles and polyacids form hydrophilic associates. The associates have the conformation of extended coils. In an associate, a major part of the micellar poly(ethylene glycol) groups is free. The local mobility of the micellar phase depends on the number of micelles involved in an associate. The mobility of surfactant molecules is slower in the complexes of poly(methacrylic acid) than in the complexes of poly(acrylic acid).     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Association of copolymers of methacrylic acid and 4-vinylpyridine in comparison with an intermacromolecular complex of poly(methacrylic acid) with poly(4-vinylpyridine)

Solution properties of copolymers [C(MA-Py)x] of methacrylic acid and 4-vinylpyridine and intermacromolecular complexes of poly(methacrylic acid) (PMAA) and poly(4-vinylpyridine) (PVP) in the presence or absence of a proton-accepting water-soluble polymer such as poly(ethylene glycol) (PEG) in water/methanol mixed solvent are studied by potentiometric titration, turbidity and viscosity methods. These copolymers behave like polyampholytes and their solubilities are strongly dependent with pH changes. The pH regions where they are precipitated around their isoelectric points are narrower than those of the intermacromolecular complex of PMAA with PVP. The polyampholyte can form an intermacromolecular complex with PEG in acidic solution but this complex is soluble in the medium.     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

Interpolymer complexes of poly(N-vinylpyrrolidone) with copolyimide-grafted side chains of poly(methacrylic acid)

The process of formation and structural organization of interpolymer complexes formed by macromolecules of poly(N-vinylpyrrolidone) and poly(methacrylic acid) chains grafted onto polyimide in solution is investigated via the method of polarized luminescence. A luminescent label of anthracene structure is covalently bound to both polymers. Relaxation times characterizing intramolecular mobility of each of the components in their interpolymer complex are measured in relation to the composition of the system.     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Complexation of sequence-ordered methacrylic acid copolymers with poly(4-vinylpyridine)

The complexation of three kinds of sequence-ordered acid (co)polymers with a base homopolymer was studied. The acid polymers used are poly(methacrylic acid) 1 , alternating (1:1) ethylene-methacrylic acid copolymer 2 , and periodic (2:1) ethylene-methacrylic acid copolymer 3 , and the base polymer is poly(4-vinylpyridine) 4. When mixing a methanol solution of 1, 2 , or 3 with that of 4 (0.1 M of each functional group), precipitate was formed immediately for all polymer pairs. All the precipitates contained carboxyl and pyridyl groups in ca. 1:1 molar ratio and showed IR spectra indicating the hydrogen bonding between carboxyl and pyridyl groups. When mixing dilute methanol solutions (10⁻⁴M) of the above polymer pairs, no precipitation was observed, but the extinction coefficient (ϵ_B) at 255 nm of pyridyl groups in 4 was found to increase with an increasing acid polymer concentration. This is ascribed to hydrogen bonding between carboxyl and pyridyl groups in methanol. Based on the ϵ_B variation, the order of complexation constants for acid/base polymer pairs was estimated as follows: 1/4 pair ∼ 2/4 pair ≫ 3/4 pair. © 1996 John Wiley & Sons, Inc.     

Binding of Cu(II) to poly(methacrylic acid)

The binding of Cu(II) ions to partly neutralized poly(methacrylic acid) (PMA) has been investigated by potentiometric titration and dialysis to determine the stoichiometry the Cu–PMA complexes formed. Partly ionized PMA was titrated with solutions of the metal ion to enable a large range of metal ion/polymer ratios to be studied. Combination of the results from these two techniques at ionic strength 0.1 indicates that at very low Cu(II)/polymer ratios, a 4:1 complex exists, but at higher ratios the complex breaks down to give a mainly 2:1 coordination with some 1:1 binding. Conductance titrations support these results. Viscometric titrations show strong interactions between the metal and polymer, preventing the full extension of the polyion at high degrees of ionization, and spectrophotometric titrations support the existence of at least two types of complexes in the solution.     

pH-responsive poly(methacrylic acid)-grafted hollow silica vesicles

Poly(methacrylic acid)-grafted hollow silica vesicles (PMAA-g-hollow silica vesicles) were obtained through a grafting-from approach. PMAA brushes were formed by performing atom-transfer radical polymerisation of sodium methacrylate with an initiator attached to the hollow silica spheres. PMAA-g-hollow silica vesicles were characterised by using TEM, thermogravimetric analysis (TGA) and FTIR spectroscopy. pH-dependent ξ potential and (1)H NMR spectra of PMAA-g-hollow silica vesicles were measured, and the results indicated that MAA brushes in PMAA-g-hollow silica vesicles had a lower ionisation degree and low solubility in acidic aqueous solution, for example, pH 3.4, but a higher ionisation degree and high solubility when the pH was higher than 7. Also it was demonstrated that calcein blue and fluorescein isothiocyanate (FITC) labelled dextran (M(n):10 kDa) could be encapsulated in the interiors of the PMAA-g-hollow silica vesicles with a negligible amount in PMAA brushes at pH 2, and pH-triggered release of calcein blue and FITC-labelled dextran from PMAA-g-hollow silica vesicles was observed at pH 7.4.     

Diffusion of dextran within poly(methacrylic acid) hydrogels

We describe an investigation of fluorescence correlation spectroscopy into the diffusion of fluorescein‐tagged dextran (FDEX) in a poly(methacrylic acid) (PMAA) hydrogel. The temperature dependence of FDEX diffusion is shown to follow Zimm behavior in pure water, and the decrease in the diffusion coefficient when in the PMAA hydrogel has been modeled. The addition of acid and alkali (HCl and NaOH, respectively) not only control the swelling and collapse of the hydrogel but also reveal a strong pH dependence of the dextran diffusion coefficient, which shows a (nonmonatonic) increase with pH. The addition of NaCl and CaCl₂ salts similarly showed evidence of network swelling, most notably at low salt concentration, but also that the diffusion coefficient within the gel at these low concentrations is larger than that in the equivalent solution without the hydrogel, indicating that the combination of hydrogel and salt works to increase the diffusion coefficient above that in pure water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Water-soluble interpolyelectrolyte complexes of polyisobutylene-block-poly(methacrylic acid) micelles: formation and properties

We report on interpolyelectrolyte complexes (IPECs) formed by micelles of ionic amphiphilic diblock copolymers with polyisobutylene (PIB) and poly(sodium methacrylate) (PMANa) blocks interacting with quaternized poly(4-vinylpyridine) (P4VPQ). The interpolyelectrolyte complexation was followed by turbidimetry and small angle neutron scattering (SANS). The data obtained by means of a combination of SANS, dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM) provide evidence on the core-shell-corona structure of the complex species with the shell assembled from fragments of electrostatically bound PMANa and quaternized P4VPQ fragments, original PIBx-b-PMAAy micelles apparently playing a lyophilizing part. The complex formation is followed by potentiometric titration as well. This process is initially kinetically controlled. In the second step larger aggregates rearrange in favor of smaller complexes with core-shell-corona structure, which are thermodynamically more stable. An increase in ionic strength of the solution results in dissociation of the complex species as proven by SANS and analytical ultracentrifugation (AUC). This process begins at the certain threshold ionic strength and proceeds via a salt-induced gradual release of chains of the cationic polyectrolyte from the complex species.     

Competitive complex forming reactions between monosubstituted and nonsubstituted poly(ethylene glycol)s with poly(methacrylic) acid

A competitive complex forming reaction between a number of monosubstituted poly(ethylene glycol)s (PEG*) containing a hydrophobic group of differing chemical nature and nonsubstituted PEG of various molecular weights with poly(methacrylic acid) (PMAA) was studied. A UV spectroscopy method was used. During the transfer of the hydrophobic chromophoric group from the aqueous medium into the hydrophobic domains of the polycomplex (PMAA.PEG*), a bathochromic effect was observed. The introduction of a hydrophobic group into the PEG chain leads to stabilization of the polycomplex (PMAA.PEG) that is formally the same as growing the chain length of PEG. The polymerization degree of PEG having the same competitive power as PEG* can be used as the peculiar scale of the complex forming ability of PEG* in the complexation with PMAA. © 1996 John Wiley & Sons, Inc.     

Reaction of syndiotactic poly(methacrylic acid hydrazide) with functional carboxylic acids

As a highly reactive tactic vinyl polymer, syndiotactic poly(methacrylic acid hydrazide) (s-PMH) was prepared from syndiotactic poly(methyl methacrylate) (s-PMMA) by hydrazinolysis. The s-PMH served as the starting polymer to prepare other tactic vinyl homopolymers having optically active functional carboxylic acids or N-protected amino acids as side chains. The condensation of the acids was carried out in water by water-soluble carbodiimides. Conversion was followed by pH and the resulting homopolymers characterized by ¹H- and ^13C-NMR spectroscopy. The NMR-spectra were assigned by comparison with low molecular weight model compounds, derived from pivalic acid hydrazide. In a third on-polymer reaction, the OH-groups present in the side chains of some of the polymers were employed for adding an optically active isocyanate to yield branched side chains.     

Stereoregular poly(methacrylic acids)

A convenient method is described for the preparation of isotactic and syndiotactic poly(trimethylsilyl methacrylates) by using the monomer trimethyl silyl methacrylate and butyllithium initiation in toluene and tetrahydrofuran, respectively. The structure of these polymers enables complete hydrolysis to the corresponding poly(methacrylic acids), which were characterized with respect to tacticity and molecular weight. The asymmetric induction in toluene produced 89% isotactic polymer, while that in tetrahydrofuran gave polymer <90% syndiotactic and heterotactic in terms of triads. A method of fractionation of the polyelectrolytes by gel-permeation chromatography on a preparative scale was shown to be applicable.