Variation of activation volumes for aquation of chloroaminecobalt(III) complexes

Activation volumes for aquation of cis-[Co(en)₂(NO₂)Cl]⁺, trans-[Co(en)₂ (CN)Cl]⁺, cis-- and cis-β-[Co(trien)Cl₂]⁺ have been determined, and are compared with values reported for a range of chloroaminecobalt(III) complexes. Variation of reported ΔV^≠ in terms of, particularly, solvation effects is discussed.     

The ion-pair association constant of oxalate with fac-tris(2-aminomethylpyridine)cobalt(III)

The equilibrium constant K for the ion-pair formation fac-[Co(pic)₃]³⁺ + C₂O₂₂₋ fac-[Co(pic)₃]³⁺/C₂O₄²⁻¹ where pic = 2-aminomethylpyridine, has been determined spectrophotometrically at 0.35 M (KCl) ionic strength and 25.0°C, using four different calculation approaches. The best results were obtained when the concentration of the minor component (the cobalt complex ion) was not neglected in comparison with the oxalate ion concentration. The value of K (5.3 M⁻¹) increases when the supporting electrolyte is LiCl (K = 8.2 M⁻¹). The effect of the ionic strength variation from 0.35 to 2.0 M (LiCl) was also investigated.     

Optically active coordination compounds---XLVIII. Synthesis, resolution and interconversions of isomers of tris-salicylatocobaltate(III)

Stable aqueous solutions of the green ion [Co(sa1)₃]³⁻ (sa1 = dianion, C₆H₄( )(CO ), of salicylic acid, 2-hydroxybenzoic acid) are obtained from [Co(NH₃)₅ C1]C1₂ and an excess of salicylic acid. Several salts, [C][Co(sa1)₃] have been characterized, where C = [Co(NH₃)₆]³⁺ and [M(en)₃]³⁺ (M = Co or Rh, EN = 1,2-diamino-ethane). By using (+)-[Rh(en)₃]³⁺, optical resolution via less soluble diastereoisomeric salts has been achieved, and isomerization and racemization have been studied. Resolved tris-malonatocobaltate(III) has been used as a model. A novel thermochromism (77-293 K) in solid Δ(+)-[Rhen₃]Λ[Co(sa1)₃ is described.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Sterically demanding cyclopentadienyl chemistry: synthesis of iron and zirconium complexes of 1-phenyl-3-methyl-4,5,6,7-tetrahydroindenyl

Reaction of phenyl magnesium bromide with the ,β-unsaturated ketone 3-methyl-2,3,4,5,6,7-hexahydroind-8(9)-en-1-one, followed by an aqueous work-up, generates the pro-chiral tetra-substituted cyclopentadiene, 1-phenyl-3-methyl-4,5,6,7-tetrahydroindene, Cp^‡H, a precursor to the η⁵-cyclopentadienyl ligand in (Cp^‡)₂Fe and [(Cp^‡)Fe(CO)]₂(μ-CO)₂. Both complexes were generated as mixtures of rac-(RR and SS)- and meso-(RS)-isomers, and in either case pure meso-isomer was isolated by crystallisation and characterised by single crystal X-ray structure, both molecules having crystallographic C_i symmetry. Reduction with Na/Hg cleaves meso-(RS)-[(Cp^‡)Fe(CO)]₂(μ-CO)₂ and the resulting mixture of (R)- and (S)-[(Cp^‡)Fe(CO)₂]⁻ anions reacts with MeI to give racemic (Cp^‡)Fe(CO)₂Me, which was characterised by the X-ray crystal structure. The Cp^‡ ligand is more electron donating than (η-C₅H₅) as revealed by the reduction potential of the (Cp^‡)₂Fe⁺/(Cp^‡)₂Fe couple, E°=−0.127 V (vs. Ag  AgCl). Reaction of LiCp^‡ with ZrCl₄ yields the zirconocene dichloride [Zr(Cp^‡)₂Cl₂] as mixture of rac- and meso-isomers, from which pure rac-isomer is obtained as a mixture of RR and SS crystals by recrystallisation. The reaction of rac-[Zr(Cp^‡)₂Cl₂] with LiMe gives rac-[Zr(Cp^‡)₂Me₂]. The structures of RR-[Zr(Cp^‡)₂Cl₂] and rac-[Zr(Cp^‡)₂Me₂] have been determined by X-ray diffraction. The structural studies reveal the influence of the bulky substituted cyclopentadienyl ligand on the metal---Cp^‡ distances and other metric parameters.     

Binuclear methyplatinum and phenylplatinum complexes with bis(dimethylphosphino)methane ligands

Reaction of cis-[Ptph₂(SMe₂)₂] with Me₂PCH₂PMe₂ (dmpm) gave cis-[PtPh₂(dmpm-P)₂] (1) or cis,cis-[Pt₂Ph₄(μ-dmpm)₂] (2) and reaction of 1 with [Pt₂Me₄(μ-SMe₂)₂] gave cis,cis-[Ph₂Pt(μ-dmpm)₂PtMe₂] (3). Reaction of 1 with trans-[PtClR(SMe₂)₂] gave cis,trans-[Ph₂Pt(μ-dmpm)₂PtClR], R = Me (5) or Ph (6), and in polar solvents, these isomerized to give [Ph₂Pt(μ-dmpm)₂PtR]⁺Cl⁻. When R = Me, further isomerization via the phenyl group transfer gave [PhMePt(μ-dmpm)₂PtPh]⁺Cl⁻. Oxidative addition of methyl iodide occurred reversibly at the cis-[PtMe₂P₂ unit of 3 to give cis,fac-[Ph₂Pt(μ-dmpm)₂PtIMe₃] but complex 2 failed to react with MeI. A comparison with similar known complexes of Ph₂PCH₂PPh₂ (dppm) is made and differences are attributed primarily to the lower steric hindrance of dmpm.     

Oxidative condensation reactions of (diethylenetriamine)cobalt(III) complexes with substituted bis(pyridin-2-yl)methane ligands

The synthesis and characterisation of Co(III) complexes derived from a condensation reaction with a central or terminal nitrogen of a dien ligand and the -carbon of a range of substituted bis(pyridin-2-yl)methane ligands are described. Aerial oxidation of bpm {bis(pyridin-2-yl)methane with Co(II)/dien or direct reaction with Co(dien)Cl₃ provided in low yield a single C–N condensation product 1 (at the primary terminal NH₂) after the pyridyl –CH₂– is formally oxidised to –CH⁺–. The methyl substituted ligand bpe {1,1-bis(pyridin-2-yl)ethane} behaves likewise, except both terminal (prim) and central (sec) amines condense to yield isomeric products 2 and 3. Two of these three materials have been characterised by single crystal X-ray crystallography. The corresponding reactions for the bis(pyridyl) ligand bpk {bis(pyridin-2-yl)ketone} provided C–N condensation products without the requirement for oxidation at the -C center; two carbinolamine complexes in different geometrical configurations resulted, mer-anti-[Co(dienbpc)Cl]ZnCl₄, 5, and unsym-fac-[Co(dienbpc)Cl]ZnCl₄, 6, {dienbpc=[2-(2-aminoethylamino)-ethylamino]-di-pyridin-2-yl-methanol}. In addition, a novel complex, [Co(bpk)(bpd-OH)Cl]ZnCl₄, 4, in which one bidentate N, N-bonded bpk ligand and one tridentate N, O, N-bonded bpd (the diol from bpk+OH⁻) were coordinated, was obtained via the Co(II)/O₂ synthetic route. When the bpc ligand (bpc=bis(pyridin-2-yl)methanol) was employed directly as a reagent along with dien, no condensation reactions were observed, but rather a single isomeric complex [Co(dien)(bpc)]Cl.ZnCl₄, 7, in which the ligand bpc acted as a N,N,O-bonded tridentate ligand rather than as a N,N-bidentate ligand was isolated. ¹³C, 1D and 2D ¹H NMR studies are reported for all the complexes; they establish the structures unambiguously.     

Tris-chelate complexes with chiral ligands: In search of diastereoisomeric selectivity with remote stereogenic centres

The chiral ligands, 4,4′-bis{(1S,2R,4S)-(−)-bornyloxy}-2,2′-bipyridine, (1S,2R,4S)-1, and 4,4′-bis{(1R,2S,4R)-(+)-bornyloxy}-2,2′-bipyridine, (1R,2S,4R)-1, have been prepared and characterized by spectroscopic techniques and, for (1S,2R,4S)-1, by single crystal X-ray diffraction. Despite the use of enantiomerically pure ligands, the formation of the complexes [Fe((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)(bpy)₂]²⁺ and [Ru((1R,2S,4R)-1)(bpy)₂]²⁺ proceeds without preference for either the Δ or Λ-diastereoisomers.     

The lively chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes, analogues of surface reactions in heterogeneous catalysis

The chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes is reviewed. The complex [{(η⁵-C₅Me₅)RhCl₂}₂] (1a) reacted with MeLi to give, after oxidative work-up, blood-red cis-[{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂], 2. This has the two rhodiums in the +4 oxidation state (d⁵), and linked by a metal-metal bond (2.620 Å). Trans-2 was formed on isomerisation of cis-2 in the presence of Lewis acids, or by direct reaction of 1a with Al₂Me₆, followed by dehydrogenation with acetone. The Rh-methyls in [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂] were readily replaced under acidic conditions (HX) to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(X)₂] (X = Cl, Br or I); these latter complexes reacted with a variety of RMgX to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)₂] (R = alkyl, Ph, vinyl, etc.). Trans-2 also reacted with HBF₄ in the presence of L to give first [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)(L)]⁺ and then [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(L)₂]²⁺ (L = MeCN, CO, etc.). The {(η⁵-C₅Me₅)Rh(μ-CH₂)}₂ core is rather kinetically inert and also forms a variety of complexes with oxy-ligands, both cis-, e.g. [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(μ-OAc)]⁺ and trans-, such as [(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(H₂O)₂]²⁺. The complexes [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)L]⁺ (R = Me or aryl) in the presence of CO, or [{(η⁵-C₄Me₅)Rh(μ-CH₂)}₂(R)₂] (R = Me, Ph or CO₂Me) in the presence of mild oxidants, readily yield the C---C---C coupled products RCH=CH₂. The mechanisms of these couplings have been elucidated by detailed labelling studies: they are more complex than expected, but allow direct analogies to be drawn to C---C couplints that occur during Fischer-Tropsch reactions on rhodium surfaces.     

Syntheses, X-ray structures, and reactions of ruthenium carbonyl complexes containing 1,1-dithiolates

Treatment of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ or [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] with uni-negative 1,1-dithiolate anions via potassium dimethyldithiocarbamate, sodium diethyldithiocarbamate, potassium tert-butylthioxanthate, and ammonium O,O′-diethylthiophosphate gives both monomeric and dimeric products of cis-[Ru(CO)₂(η²-(SS))₂] ((SS)⁻=Me₂NCS₂⁻ (1), Et₂NCS₂⁻ (2), ^tBuSCS₂⁻ (3), (EtO)₂PS₂⁻ (4)) and [Ru(CO)(η²-(Me₂NCS₂))(μ,η²-Me₂NCS₂)]₂ (5). The lightly stabilized MeCN ligands of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ are replaced more readily than the bound acetate ligands of [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] by thiolates to produce cis-[Ru(CO)₂(η²-(SS))₂] with less selectivity. Structures 1 and 5 were determined by X-ray crystallography. Although the two chelating dithiolates are cis to each other in 1, the dithiolates are trans to each other in each of the {Ru(CO)(η²-Me₂NCS₂)₂} fragment of 5. The dimeric product 5 can be prepared alternatively from the decarbonylation reaction of 1 with a suitable amount of Me₃NO in MeCN. However, the dimer [Ru(CO)(η²-Et₂NCS₂)(μ,η²-Et₂NCS₂)]₂ (6), prepared from the reaction of 2 with Me₃NO, has a structure different from 5. The spectral data of 6 probably indicate that the two chelating dithiolates are cis to each other in one {Ru(CO)(η²-Et₂NCS₂)₂}fragment but trans in the other. Both 5 and 6 react readily at ambient temperature with benzyl isocyanide to yield cis-[Ru(CO)(CNCH₂Ph)(η²-(SS))₂] ((SS)=Me₂NCS₂⁻ (7) and Et₂NCS₂⁻ (8)). A dimerization pathway for cis-[Ru(CO)₂(η²-(SS))₂] via decabonylation and isomerization is proposed.     

Reactivity of tri- and tetra-nuclear ethylidyne cyclopentadienylcobalt clusters towards protonic acids

The bis(μ₃-ethylidyne) tricobalt cluster [(CpCo)₃(μ₃-CCH₃)₂] (1b) is protonated by trifluoroacetic acid to give the dicobalt edge-protonated cation [H(CpCo)₃(μ₃-CCH₃)₂]⁺ [lb + H]⁺. Protonation of the μ₃-ethylidyne tetracobalt cluster hydride [H(CpCo)₄(μ₃-CCH₃)] (3) takes place in two consecutive steps. At low temperature [H₂(CpCo)₄(μ₃-CCH₃)]⁺ [3 + H]⁺ is formed first, and is then slowly converted into [H₃(CpCo)₄(μ₃-CCH₃)]²⁺ [3 + 2H]²⁺ by an excess of acid. As judged by the ¹H NMR data and the crystal structure of [3 + X]⁺[(CF₃COO)₂X]⁻ (X = H or D) the endo hydrogens in [3 + H]⁺ and [3 + 2H]²⁺ occupy μ₃-(Co₃) face capping hydridic positions. The cations [1b + H]⁺ and [3 + H]⁺ show hydride fluxionality in solution, which in the case of [3 + H]⁺ can be frozen out on the NMR timescale at low temperature (ΔG ^≠ (203 K) = 40.8 kJ/mol). The structure of [3 + X]⁺ [(CF₃COO)₂X]⁻ (X = H or D) was determined by X-ray crystallography. One of the hydrides/deuterides is located on the crystallographic mirror plane, capping a tricobalt face of the cluster cation. The other endo hydrogen atom is believed to be disordered between the other two μ₃-(Co₃) sites, which are related by space group symmetry. Deuteronation of 3 shows a strong normal kinetic deuterium isotope effect. From the temperature independence of the ¹H NMR spectrum of [3 + 2D]²⁺ a non-fluxional solution structure can be inferred. In all the systems studied, hydridic (μ₂- or μ₃-) sites are thermodynamically preferred to possible isomeric agostic CoHC or Co₂HC sites for the endo hydrogens. Agostic interactions cannot, however, be ruled out in transient intermediates during the course of the protonations.     

Nido-6-metalladecaborane chemistry: Molecular structure and fluxionality of [6,6,6,6-(CO)2(PPh3)2-nido-6-WB9H13]

The molecular and crystal structure of the nido-6-tungstadecaborane [6,6,6,6-(CO)₂(PPh₃)₂-nido-6-WB₉H₁₃] (1) has been determined showing that the tungsten atom is incorporated into the 6-position of a nido 10-vertex (WB₉) cage. The tungsten atom has a seven-coordinate capped trigonal prismatic environment and is bonded to two hydrogen and three boron atoms of the {B₉H₁₃} cage, in addition to two CO groups and two PPh₃ ligands. Variable-temperature (−90°C to +50°C) ³¹P{¹H} NMR spectroscopy of 1 reveals that the exo-polyhedral ligands about the tungsten atom are fluxional with respect to PPh₃ site exchange with an activation energy (ΔG‡), at the coalescence temperature (−73°C), of <38 kJ mol⁻¹.     

The dependence of photoinduced energy transfer on the orientation of the acceptor with respect to the π-plane of the donor in naphthalene-linked crown ether–Tb complexes

The photoinduced energy transfer (ET) from naphthalene (N) to Tb³⁺ has been studied in the complexes of Tb³⁺ ion with 2,3-naphtho-17-crown-5 ether(I), 2,3-naphtho-20-crown-6 ether(II), 1,8-naphtho-21-crown-6 ether(III) and 1,5-naphtho-22-crown-6 ether(IV), respectively, using nitrate (NO₃⁻) ion as the counter anion in EtOH glass at 77 K. The ligands are so designed that the Tb³⁺ ion can be complexed with a predetermined orientation with respect to the naphthalene molecular plane. In systems I and II, the Tb³⁺ ion is along the Z-axis; in system III, it is along the Y-axis and in IV, it is along the X-axis, where Z- and Y- are the molecular in-plane long and short axes of the naphthalene molecular plane respectively and X- is the out-of plane axis perpendicular to the naphthalene molecular plane. Present studies indicate that the efficiency of energy transfer (ET) and the quenching of naphthalene phosphorescence show a strong dependence on the orientation of the acceptor metal ion (Tb³⁺) with respect to the π-plane of the donor naphthalene moiety. The ET studies suggest that an exchange mechanism involving the lowest (ππ^*) triplet state of N and the ⁵D₄ state of Tb³⁺ ion is predominantly operating. Our observation further indicates that for a given orientation in a complex the emission intensity of the various transitions (⁵D₄ → ⁷F_J, J=2–6) for Tb³⁺, vis-a-vis ET efficiency varies considerably with ΔJ values (=0, +1 and +2).     

Steric effects of the 2-(diphenylphosphino)pyridine bridging ligand in the synthesis of binuclear palladium(II) complexes

Treatment of [Pd{CH₂C(CH₃)CH₂}(Ph₂PPy)Cl] (Ph₂PPy = 2-(diphenylphosphino)pyridine) with cis-[Pd(^tBuNC)₂Cl₂] in dichloromethane affords the mixed isocyanide-tertiary phosphine complex cis-[Pd(^tBuNC)Ph₂PPy)Cl₂], in which the Ph₂PPy is a monodentate P-donor, and [{Pd[CH₂C(CH₃)CH₂]Cl}₂]. The steric effects of the Ph₂PPy bridging ligand in determining the reaction course is discussed. The complex cis-[Pd(^tBuNC)(Ph₂PPy)Cl₂] was crystallographically characterized: P2₁/n, a = 15.143(2), b = 9.527(1), c = 17.517(4) Å, β = 113.96(1)°, V= 2309.4(7) ų, Z = 4. The final R value was 0.044, R^w= 0.046 for the 3078 reflections with I > 3σ(I).     

Macropolyhedral boron-containing cluster chemistry. Aspects of the S2B16H16 system. Preparation, structure, NMR spectroscopy and isomerism

Thermolysis of [arachno-4-SB₈H₁₂] (1) in boiling cyclohexane gives two isomers 2 and 3 of 18-vertex [S₂B₁₆H₁₆], together with known 12-vertex [closo-1-SB₁₁H₁₁] (4) and known 11-vertex [nido-7-SB₁₀H₁₂] (5). Compounds 2 and 3 are characterised by single-crystal X-ray diffraction analyses and single- and double-resonance ¹¹B- and ¹H-NMR spectroscopy. The [n-S₂B₁₆H₁₆] isomer 2 takes the form of nido ten-vertex: nido ten-vertex [anti-B₁₈H₂₂] with the 9 and 9′ positions occupied by S vertices, whereas the [iso-S₂B₁₆H₁₆] isomer 3 takes the form of a nido 11-vertex {SB₁₀} subcluster fused via a common two-boron edge to a nido-type {B₈} subcluster that is additionally linked exo to the {SB₁₀} subcluster by a bridging S atom that is held endo to the {B₈} unit. Isomer 2 is readily deprotonated and its monoanion 6 is characterised by NMR spectroscopy and by a single-crystal X-ray diffraction analysis of its [tmndH]⁺[n-S₂B₁₆H₁₅] salt 6b; deprotonation has occurred from an open-face B---H---B bridging site.     

Rhenium(I) methoxo carbonyl complexes containing tetraphosphine or triphosphine ligands; facile separation and X-ray crystallographic studies of d/l- and meso-[{Re2(μ-OMe)2(CO)6}2(μ,μ′-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetra-phosphadecane)]

Reaction of the activated mixture of Re₂(CO)_10, Me₃NO and MeOH with a 1:1 mixture of rac (d/l)- and meso-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane (hptpd) yields a mixture of (d/l)- and meso-[{Re₂(μ-OMe)₂(CO)₆}₂(μ,μ′-hptpd)] 1. The diastereomers can be easily separated by selective dissolution of d/l-1 in benzene, and give clearly distinguishable ¹H- and ³¹P-NMR spectra. The fluxional behavior of d/l-1 in solution has been studied by variable-temperature ¹H- and ³¹P-{¹H}-NMR spectroscopy. The crystal structures of both d/l- and meso-1 have been determined. Both molecules consist of two {Re₂(μ-OMe)₂(CO)₆} moieties which are bridged by the two P---CH₂---CH₂---P moieties of the hptpd ligand. Whilst the molecules of meso-1 possess crystallographic i-symmetry, those of d/l-1 do not have any crystallographic symmetry. These diastereomers therefore give clearly distinguishable Raman spectra in the solid state. Reaction of tris[2-(diphenylphosphino)ethyl]phosphine (tdppep) with the activated mixture affords the complex [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-tdppep)] 2, and the analogous reaction involving bis[2-diphenylphospinoethyl)phenylphosphine (triphos) gives [{Re₂(μ-OMe)₂(CO)₆}(μ,μ′,η³-triphos){Re₂(CO)₉}] 3 and [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-triphos)] 4.     

Thermal cis—trans isomerization of bis(diamine) cobalt(III) and chromium(III) complexes in a solid phase

Thermal cis—trans isomerization of the simple bis(diamine) complexes [MX₂(aa or bb)₂]X · HX · n H₂O and the mixed bis(diamine) complexes [MX₂(aa)(bb)]X · HX · n H₂O was investigated in a solid phase, where M = Co(III) or Cr(III) ion, X = Cl or Br, aa and bb are one of the diamines selected from ethylenediamine (en), d, l-1,2-propane-diamine (pn), d,l-2,3-butanediamine (dl-bn), d,l-1,2-cyclohexanediamine (chxn), 1,3-propanediamine (ln) and d,l-2,4-pentanediamine (ptn), and n = 0–2. The information obtained may be summarized as follows. (1) The features of isomerization are considerably dependent upon the kind of metal ions, halide ions and diamines contained in the complexes. (2) Trans-cis isomerization was identified in the simple bis(diamine) complexes containing en, pn, dl-bn or chxn which can form five-membered chelate rings with metal ions, whereas cis-trans isomerization was detected in the simple bis(diamine) complexes containing tn or ptn which forms six-membered rings; all the mixed bis(diamine) complexes isomerize from trans to cis even when they have a combination of five- and six-membered chelate rings. (3) The cobalt(III) complexes isomerize in a temperature range of dehydration and/or dehydrohalogenation with activation energies of about 100 kJ mole⁻¹, whereas the chromium(III) complexes usually isomerize in the anhydrous state and the activation energies amount to as much as 150–190 kJ mole⁻¹. (4) “Aquation-anation” and “bond rupture” were proposed for the isomerization of the cobalt(III) and the chromium(III) complexes, respectively.     

Paramagnetic ruthenium(III) cyclometallated complex. Synthesis, spectroscopic studies and electron-transfer properties

The reaction of Ru^II(PPh₃)₃X₂ (X = Cl, Br) with o-(OH)C₆H₄C(H)=N-CH₂C₆H₅ (HL) under aerobic conditions affords Ru^II(L)₂(PPh₃)₂, 1, in which both the ligands (L) are bound to the metal center at the phenolic oxygen (deprotonated) and azomethine nitrogen and Ru^III(L¹)(L²)(PPh₃), 2, in which one L is in bidentate N,O form like in complex 1 and the other ligand is in tridentate C,N,O mode where cyclometallation takes place from the ortho carbon atom (deprotonated) of the benzyl amine fragment. The complex 1 is unstable in solution, and undergoes spontaneous oxidative internal transformation to complex 2. In solid state upon heating, 1 initially converts to 2 quantitatively and further heating causes the rearrangement of complex 2 to the stable RuL₃ complex. The presence of symmetry in the diamagnetic, electrically neutral complex 1 is confirmed by ¹H and ³¹P NMR spectroscopy. It exhibits an Ru^II → L, MLCT transition at 460 nm and a ligand based transition at 340 nm. The complex 1 undergoes quasi-reversible ruthenium(II)—ruthenium(III) oxidation at 1.27V vs. SCE. The one-electron paramagnetic cyclometallated ruthenium(III) complex 2 displays an L → Ru^III, LMCT transition at 658 nm. The ligand based transition is observed to take place at 343 nm. The complex 2 shows reversible ruthenium(III)—ruthenium(IV) oxidation at 0.875V and irreversible ruthenium(III)—ruthenium(II) reduction at −0.68V vs. SCE. It exhibits a rhombic EPR spectrum, that has been analysed to furnish values of axial (6560 cm⁻¹) and rhombic (5630 cm⁻¹) distortion parameters as well as the energies of the two expected ligand field transitions (3877 cm⁻¹ and 9540 cm⁻¹) within the t₂ shell. One of the transitions has been experimentally observed in the predicted region (9090 cm⁻¹). The first order rate constants at different temperatures and the activation parameter ΔH^#/ΔS^# values of the conversion process of 1 → 2 have been determined spectrophotometrically in chloroform solution.     

On the positronium spin conversion reactions caused by some macrocyclic Co complexes

The rate constants, k_CR, of ortho- into para-positronium (o-Ps→p-Ps) spin conversion reactions, CR, caused by the high-spin [Co^IIsep]²⁺, [Co^IIdinosar]²⁺ and [Co^IIdiamsar]²⁺ macrocyclic complexes and also by high-spin [Co^II sen]²⁺ tripod complex were measured at several temperatures. The delocalizations, β, of Co^II unpaired electrons, promoted by the mentioned ligands, were determined by using the previously established correlations between k_CR and the electron delocalization β of unpaired metal electrons. β is given by the ratio between the Racah inter-electronic repulsion parameters of complexes, B, and that of the free ions, B₀. The β values are compared with those of the Co^II complexes with en (1,2-ethanediamine), pn (1,2 propanediamine) and dien (2,2′ diamino diethylamine) ligands. The k_CR rate constants are also compared with those of the Ps oxidation reactions, OR, promoted by the corresponding Co^III complexes. It is concluded that, unlike OR's, the CR's do not occur by formation of hepta-coordinate adducts with Ps atoms.     

Das Reaktionsverhalten von Cp2NbCl2 gegenüber WF6—Struktur von [Cp2NbCl2]4[WF6]2[WCl6]

The oxidation of Cp₂NbCl₂ with pure WF₆ in SO₂ solution yielded the cationic metallocene species [Cp₂NbCl₂]⁺[WF₆]⁻ essentially in quantitative yield. The same reaction carried out in the presence of either equimolar amounts or a two-fold excess of HCN led to the preparation of the new niobocenium salt [Cp₂NbCl₂]₄⁺[WF₆]²⁻ which was studied by single crystal X-ray diffraction. This compound represents the first example of a structurally characterized metallocene-WF₆⁻ complex, and crystallizes in the tetragonal system: space group, P4₁2₁2(No. 92), a = 11.083(8) Å, c = 48.285 (9) Å; Z = 8; R = 0.0759, R_W = 0.0841. ab]Die Oxidation von Cp₂NbCl₂ mit reinem WF₆ führt in SO₂-Lösung zur Synthese von [Cp₂NbCl₂ ]⁺[WF₆]⁻ in nahezu quantitativer Ausbeute. Die analoge Reaktion führt unter Anwesenheit der äquimolaren Menge oder eines zweifachen Überschusses an HCN zur Ausbildung des Niobocenium-Komplexsalzes [Cp₂NbCl₂]₄⁺ [WF₆]₂⁻[WCl₆]²⁻, von dem eine Röntgenstrukturanalyse angefertigt wurde. Diese Verbindung repräsentiert den ersten structurell charakterisierten Vertreter eines Metallocen-WF₆⁻-Komplexes und kristallisiert im tetragonalen System: Raumgruppe P4₁2₁2 (Nr. 92), a = 11.083(8) Å, c = 48.285(9) Å; Z = 8; R = 0.0759, R_W = 0.0841. kw]Niobium; X-ray diffraction; Oxidation; Metallocenes