Comparison of analytical techniques for purity evaluation of single-walled carbon nanotubes

We compare popular analytical techniques, including scanning and transmission electron microscopy (SEM and TEM), thermogravimetric analysis (TGA), and Raman and near-infrared (NIR) spectroscopy, for the evaluation of the purity of bulk quantities of single-walled carbon nanotubes (SWNTs). Despite their importance as imaging techniques, SEM and TEM are not capable of quantitatively evaluating the purity of typical inhomogeneous bulk SWNT samples because the image frame visualizes less than 1 pg of SWNT material; furthermore, there is no published algorithm to convert such images into numerical data. The TGA technique is capable of measuring the amount of metal catalyst in an SWNT sample, but does not provide an unambiguous separation between the content of SWNTs and carbonaceous impurities. We discuss the utilization of solution-phase near-infrared spectroscopy and solution-phase Raman spectroscopy to quantitatively compare arbitrary samples of bulk SWNT materials of different purities. The primary goal of this paper is to provide the chemical community with a realistic evaluation of current analytical tools for the purity evaluation of a bulk sample of SWNTs. The secondary goal is to draw attention to the growing crisis in the SWNT industry as a result of the lack of quality control and the misleading advertising by suppliers of this material.     

RBM band shift-evidenced dispersion mechanism of single-wall carbon nanotube bundles with NaDDBS

The dispersion process of single-wall carbon nanotube (SWNT) by using sodium dodecylbenzene sulfonate (NaDDBS) was studied by means of surface tension measurements, ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), and transmission electron spectroscopy (TEM). The critical micelle concentration (CMC) and the concentration where the surface tension begins to drop increase by the presence of SWNT. The isotherm of NaDDBS amount adsorbed on SWNT shows the plateau region at 0.2-6 mM and the saturated region above 40 mM. The external surface of SWNT bundle is fully covered with adsorbed NaDDBS at the plateau region, showing that SWNTs can be dispersed with the bundle form. On the other hand, SWNTs are dispersed in individual tubes at the saturated region, where the adsorption amount corresponds to coating of individual tube surfaces with NaDDBS. This dispersion state was confirmed by SEM and TEM observations. The effect of the dispersion state of SWNTs on radial breathing mode in Raman spectrum gave inherent peak shifts, being the in situ evidences on the step-wise dispersion mechanism of the SWNT bundle to the individual tubes.     

Human fibrinogen adsorption onto single-walled carbon nanotube films

The adsorption behavior of human fibrinogen (Hfg) on single-walled carbon nanotube (SWNT) films was investigated using scanning electron microscopy (SEM) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was shown in the SEM images that fibrinogen was adsorbed strongly on the surface of SWNT when the samples were incubated in the Hfg solutions for 10 min. The dependence of adsorption on the concentration of fibrinogen was also investigated and it was found that adsorption increased with increasing concentration. In order to further explore the adsorption of fibrinogen on SWNT surface, NEXAFS spectra were obtained at the N K-edge and the C K-edge. The results confirmed the conclusion regarding the dependence of adsorption on fibrinogen concentration. It is demonstrated that, due to its high sensitivity to the surface elements, NEXAFS spectroscopy is a powerful tool to investigate the adsorption of fibrinogen on SWNT films.     

Mediated amperometric immunosensing using single walled carbon nanotube forests

A prototype amperometric immunosensor was evaluated based on the adsorption of antibodies onto perpendicularly oriented assemblies of single wall carbon nanotubes called SWNT forests. The forests were self-assembled from oxidatively shortened SWNTs onto Nafion/iron oxide coated pyrolytic graphite electrodes. The nanotube forests were characterized using atomic force microscopy and resonance Raman spectroscopy. Anti-biotin antibody strongly adsorbed to the SWNT forests. In the presence of a soluble mediator, the detection limit for horseradish peroxidase (HRP) labeled biotin was 2.5 pmol ml(-1) (2.5 nM). Unlabelled biotin was detected in a competitive approach with a detection limit of 16 nmol ml(-1) (16 microM) and a relative standard deviation of 12%. The immunosensor showed low non-specific adsorption of biotin-HRP (approx. 0.1%) when blocked with bovine serum albumin. This immunosensing approach using high surface area, patternable, conductive SWNT assemblies may eventually prove useful for nano-biosensing arrays.     

Single wall carbon nanotube amplification: en route to a type-specific growth mechanism

With the desire to mass produce any specific n,m type of single wall carbon nanotube (SWNT) from a small sample of the same material, we disclose here the preliminary work directed toward that goal. The ultimate protocol would involve taking a single n,m-type nanotube sample, cutting the nanotubes in that sample into many short nanotubes, using each of those short nanotubes as a template for growing much longer nanotubes of the same type, and then repeating the process. The result would be an amplification of the original tube type: a parent SWNT serving as the prolific progenitor of future identical SWNT types. As a proof-of-concept, we use here a short SWNT seed as a template for vapor liquid solid (VLS) amplification growth of an individual long SWNT. The original short SWNT seed was a polymer-wrapped SWNT, end-carboxylated, and further tethered with Fe salts at its ends. The Fe salts were to act as the growth catalysts upon subsequent reductive activation. Deposition of the short SWNT-Fe tipped species upon an oxide surface was followed by heating in air to consume the polymer wrappers, then reducing the Fe salts to Fe(0) under a H2-rich atmosphere. During this heating, the Fe(0) can etch back into the short SWNT so that the short SWNT acts as a template for new growth to a long SWNT that occurs upon introduction of C2H4 as a carbon source. Analysis indicated that the templated VLS-grown long SWNT had the same diameter and surface orientation as the original short SWNT seed, although amplifying the original n,m type remains to be proven. This study could pave the way for an amplified growth process of SWNTs en route to any n,m tube type synthesis from a starting sample of pure nanotubes.     

Functionalization of single-walled carbon nanotube by the covalent modification with polymer chains

A single-walled carbon nanotube (SWNT), which had been oxidized by incubation with a mixture of nitric acid and sulfuric acid to afford carboxyl groups at its ends, was incubated with an azo-type radical initiator carrying poly(2-methacryloyloxyethyl D-glucopyranoside) blocks at both ends (PMEGlc-initiator). Due to its high radical trapping activity, the SWNT could be coated with glycopolymers corresponding to the cloven macro-initiator (PMEGlc-SWNT). The PMEGlc-SWNT indicated a lectin (concanavalin A, Con A)-induced aggregation, and a buckey sheet composed of PMEGlc-SWNT could be used for the recovery of Con A from its aqueous solution. Furthermore, the carboxylated SWNT was also incubated with a terminal-aminated poly(N-isopropyl acrylamide) (PIPA) and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide HCl salt (PIPA-SWNT). The PIPA-SWNT indicated a definite temperature-responsiveness in the turbidity of its dispersion. These methods would be promising to modify SWNT with various functional polymers.     

Electrochemical detection of amino acids at carbon nanotube and nickel-carbon nanotube modified electrodes

The oxidation and enhanced detection of traditionally 'non-electroactive' amino acids at a single-wall carbon nanotube (SWNT) surface and at a nickel hydroxide film electrochemically deposited and generated upon the SWNT layer is reported. Different CNT are compared, with Nafion-dispersed SWNT offering the most favorable layer for constant-potential amperometric detection. Factors affecting the oxidation process, including the pH or applied potential, are assessed. The response of the SWNT-Nafion coated electrode compares favorably with that of copper and nickel disk electrodes under flow injection analysis (FIA) conditions. The electrodeposition of nickel onto the SWNT-Nafion layer (Ni-CNT) led to a dramatic enhancement of the analytical response (vs. that observed at the SWNT or nickel electrodes alone). The oxidative process at the Ni(OH)(2) layer has been studied and the increase in sensitivity rationalized. In the presence of amino acid the Ni-CNT layer undergoes an electrocatalytic process in which the amino acid reduces the newly formed NiO(OH) species. Furthermore, the attractive response of both the CNT and Ni-CNT layers has allowed these electrodes to be used for constant-potential FIA of various amino acids and indicates great promise for monitoring chromatographic effluents. Once again an improved signal was observed at the Ni-CNT electrode compared to nickel deposited upon a bare glassy carbon electrode (Ni-GC).     

Mechanisms of single-walled carbon nanotube probe-sample multistability in tapping mode AFM imaging

When using single-walled carbon nanotube (SWNT) probes to create AFM images of SWNT samples in tapping mode, elastic deformations of the probe and sample result in a decrease in the apparent width of the sample. Here we show that there are two major mechanisms for this effect, smooth gliding and snapping, and compare their dynamics to the case when a conventional silicon tip is used to image a bare silicon surface. Using atomistic and continuum simulations, we analyze in detail the shape of the tip-sample interaction potential for three model cases and show that in the absence of adhesion and friction forces, more than two discrete, physically meaningful solutions of the oscillation amplitude are possible when snapping occurs (in contrast to the existence of one attractive and one repulsive solution for conventional silicon AFM tips). We present experimental results indicating that a continuum of amplitude solutions is possible when using SWNT tips and explain this phenomenon with dynamic simulations that explicitly include tip-sample adhesion and friction forces. We also provide simulation results of SWNT tips imaging Si(111)-CH3 surface step edges and Au nanocrystals, which indicate that SWNT probe multistability may be a general phenomenon, not limited to SWNT samples.     

Raman studies of solutions of single-wall carbon nanotube salts

Polyelectrolyte solutions of Na-doped single-wall carbon nanotube (SWNT) salts are studied by Raman spectroscopy. Their Raman signature is first compared to undoped SWNT suspensions and dry alkali-doped SWNT powders, and the results indicate that the nanotube solutions consist of heavily doped (charged) SWNT. Raman signature of doping is then used to monitor in situ the oxidation reaction of the nanotube salt solutions upon exposure to air and to an acceptor molecule (benzoquinone). The results indicate a direct charge-transfer reaction from the acceptor molecule to the SWNT, leading to their gradual charge neutralization and eventual precipitation in solution. The results are consistent with a simple redox titration process occurring at the thermodynamical equilibrium.     

Layer-by-layer electrostatic self-assembly of single-wall carbon nanotube polyelectrolytes

We have used anionic and cationic single-wall carbon nanotube polyelectrolytes (SWNT-PEs), prepared by the noncovalent adsorption of ionic naphthalene or pyrene derivatives on nanotube sidewalls, for the layer-by-layer self-assembly to prepare multilayers from carbon nanotubes with polycations, such as poly(diallyldimethylammonium) or poly(allylamine hydrochloride) (PDADMA or PAH, respectively), and polyanions (poly(styrenesulfonate), PSS). This is a general and powerful technique for the fabrication of thin carbon nanotube films of arbitrary composition and architecture and allows also an easy preparation of all-SWNT (SWNT/SWNT) multilayers. The multilayers were characterized with vis-near-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), surface plasmon resonance (SPR) measurements, atomic force microscopy (AFM), and imaging ellipsometry. The charge compensation in multilayers is mainly intrinsic, which shows the electrostatic nature of the self-assembly process. The multilayer growth is linear after the initial layers, and in SWNT/polyelectrolyte films it can be greatly accelerated by increasing the ionic strength in the SWNT solution. However, SWNT/SWNT multilayers are much more inert to the effect of added electrolyte. In SWNT/SWNT multilayers, the adsorption results in the deposition of 1-3 theoretical nanotube monolayers per adsorbed layer, whereas the nominal SWNT layer thickness is 2-3 times higher in SWNT/polyelectrolyte films prepared with added electrolyte. AFM images show that the multilayers contain a random network of nanotube bundles lying on the surface. Flexible polyelectrolytes (e.g., PDADMA, PSS) probably surround the nanotubes and bind them together. On macroscopic scale, the surface roughness of the multilayers depends on the components and increases with the film thickness.     

Thermal physics in carbon nanotube growth kinetics

The growth of single wall carbon nanotubes (SWNTs) mediated by metal nanoparticles is considered within (i) the surface diffusion growth kinetics model coupled with (ii) a thermal model taking into account heat release of carbon adsorption-desorption on nanotube surface and carbon incorporation into the nanotube wall and (iii) carbon nanotube-inert gas collisional heat exchange. Numerical simulations performed together with analytical estimates reveal various temperature regimes occurring during SWNT growth. During the initial stage, which is characterized by SWNT lengths that are shorter than the surface diffusion length of carbon atoms adsorbed on the SWNT wall, the SWNT temperature remains constant and is significantly higher than that of the ambient gas. After this stage the SWNT temperature decreases towards that of gas and becomes nonuniformly distributed over the length of the SWNT. The rate of SWNT cooling depends on the SWNT-gas collisional energy transfer that, from molecular dynamics simulations, is seen to be efficient only in the SWNT radial direction. The decreasing SWNT temperature may lead to solidification of the catalytic metal nanoparticle terminating SWNT growth or triggering nucleation of a new carbon layer and growth of multiwall carbon nanotubes.     

Controlled confinement and release of gases in single-walled carbon nanotube bundles

A simple procedure is described that locks small quantities of SF6, CO2, and 13CO2 into opened single-walled carbon nanotube (SWNT) bundles and keeps the gas in the SWNTs above the desorption temperature of these molecules. The technique involves opening the SWNTs with ozonolysis at 300 K followed by vacuum-annealing at 700 K. Gases are then cryogenically adsorbed into the opened SWNTs and locked into the SWNT pores by functionalizing the sample with a low-temperature ozone treatment. The low-temperature ozone treatment functionalizes the entry ports into the SWNT pores, which in turn create a physical barrier for gases trying to desorb through these functionalized ports. The samples are stable under vacuum for periods of at least 24 h, and the trapped gases can be released by vacuum-heating to 700 K. Reduced quantities of the trapped gases remain in the SWNTs even after exposure to room air. Fourier transform infrared spectroscopy is used to monitor the functionalities resulting from the ozone treatment and to detect the trapped gas species.     

High-performance hydrogen production and oxidation electrodes with hydrogenase supported on metallic single-wall carbon nanotube networks

We studied the electrocatalytic activity of an [FeFe]-hydrogenase from Clostridium acetobutylicum (CaH2ase) immobilized on single-wall carbon nanotube (SWNT) networks. SWNT networks were prepared on carbon cloth by ultrasonic spraying of suspensions with predetermined ratios of metallic and semiconducting nanotubes. Current densities for both proton reduction and hydrogen oxidation electrocatalytic activities were at least 1 order of magnitude higher when hydrogenase was immobilized onto SWNT networks with high metallic tube (m-SWNT) content in comparison to hydrogenase supported on networks with low metallic tube content or when SWNTs were absent. We conclude that the increase in electrocatalytic activities in the presence of SWNTs was mainly due to the m-SWNT fraction and can be attributed to (i) substantial increases in the active electrode surface area, and (ii) improved electronic coupling between CaH2ase redox-active sites and the electrode surface.     

A targetable fluorescent sensor for hypochlorite based on a luminescent europium complex loaded carbon nanotube

A new europium complex covalently modified single-walled carbon nanotube (SWNT) was reported here as an emissive nanosensor for the determination of hypochlorite. FT-IR, UV-vis, TEM and SEM proved that it was successfully linked to the SWNT surface. A luminescence quenching effect of this nanoprobe was rapidly observed in the presence of ClO(-). Moreover, the quenching process can be detected within 1 s and the detection limit could reach 9 × 10(-8) M. We regarded that the ligand exchange process and the high vibration energy of the ClO(-) resulted in this selective recognition behavior.     

Large-scale fabrication of aligned single-walled carbon nanotube array and hierarchical single-walled carbon nanotube assembly

Aligned single-walled carbon nanotubes (SWNTs) and hierarchical SWNT assembly were fabricated by electrospinning. The high fiber elongation and high DC electric field applied during the electrospinning process result in the orientation of the SWNTs along the axial direction of the fiber. The alignment of the electropsun composite fiber transfers this local SWNT orientation to macroscopically aligned SWNTs. After removing the polymer component from the aligned composite fiber, we produced large area aligned SWNTs. The results show that the directional control of SWNT alignment and debundling of SWNTs into individual tubes can be simultaneously realized.     

Catalytic polymerization and facile grafting of poly(furfuryl alcohol) to single-wall carbon nanotube: preparation of nanocomposite carbon

A nanocomposite carbon was prepared by grafting a carbonizable polymer, poly(furfuryl alcohol) (PFA), to a single-wall carbon nanotube (SWNT). The SWNT was first functionalized with arylsulfonic acid groups on the sidewall via a method using a diazonium reagent. Both Raman and FTIR spectroscopies were used to identify the functional groups on the nanotube surface. HRTEM imaging shows that the SWNT bundles are exfoliated after functionalization. Once this state of the SWNTs was accomplished, the PFA-functionalized SWNT (PFA-SWNT) was prepared by in situ polymerization of furfuryl alcohol (FA). The sulfonic acid groups on the surface of the SWNT acted as a catalyst for FA polymerization, and the resulting PFA then grafted to the SWNTs. The surfaces of the SWNTs converted from hydrophilic to hydrophobic when they were wrapped with PFA. The formation of the polymer and the attraction between it and the sulfonic acid groups were confirmed by IR spectra. A nanocomposite carbon was generated by heating the PFA-SWNT in argon at 600 degrees C, a process during which the PFA was transformed to nanoporous carbon (NPC) and the sulfonic acid groups were cleaved from the SWNT. Based upon the Raman spectra and HRTEM images of the composite, it is concluded that SWNTs survive this process and a continuous phase is formed between the NPC and the SWNT.     

A low-cost Raman spectrometer design used to study Raman scattering from a single-walled carbon nanotube

The paper discusses the design of a low cost Raman spectrometer. Single-walled nanotubes (SWNT) have been studied to demonstrate the reach of such a system. We observe both the radial-breathing mode (RBM) and the tangential mode from the SWNT. The tube diameters of the SWNT used in these experiments have been determined using RBM to be predominantly 1.4 and 1.6 nm. These are consistent with the TEM images taken of the same sample. The new method of producing SWNT using Ni-Y catalyst in electric-arc discharge method produces nanotubes with very small dispersion in diameter and high yields. The chirality of the SWNT can be deduced from their radial breathing modes, and it suggests that they are metallic in nature. Dedicated to Professor C N R Rao on his 70th birthday     

Rheological, thermal, and mechanical characterizations of polystyrene/single-walled carbon nanotube composites

For preparation of polystyrene (PS) composites, a polymeric dispersant, pyrene-capped polystyrene (PyPS), was applied for noncovalent functionalization of single-walled carbon nanotubes (SWNTs) to improve both dispersion quality and PS–SWNT interfacial interactions. To demonstrate the critical role of PyPS, the composites with the absence of PyPS (PS/SWNT) were also prepared for comparison. Rheological studies suggest that addition of SWNTs, particularly of PyPS-functionalized SWNTs, suppresses significantly large-scale relaxation of PS chains but has little effect on their short-range dynamics. Relative to PS, moderately improved thermal and mechanical properties took place on the composites with either pristine or PyPS-functionalized SWNTs. The PS/PyPS/SWNT composite usually presents better performance than the PS/SWNT one at a fixed SWNT content.     

Atomic force microscopy measurements of peptide-wrapped single-walled carbon nanotube diameters.

With a vertical resolution of 0.1 nm, atomic force microscopy (AFM) height measurements can be used to determine accurately the diameter of single-walled carbon nanotubes (SWNT) with the assumption that they have circular cross sections. The aim of this article is to draw attention to the need to optimize operating parameters in tapping mode for quantitative AFM height (diameter) analysis of SWNTs. Using silicon tip/cantilever assemblies with force constants ranging from 0.9 to 40 N m(-1), we examined the effect of applied force on the apparent diameter of SWNT wrapped with a 29-residue amphiphilic alpha-helical peptide. A decrease in apparent height (SWNT diameter) with increasing applied force was observed for the higher force constant cantilevers. Cantilevers having force constants of 0.9 and 3 N m(-1) demonstrated minimal vertical sample compression with increasing applied force. The effects of AFM image pixel density and scan speed on the measured height (diameter) of SWNTs were also assessed.     

Electrochemical and conductivity measurements of single-wall carbon nanotube network electrodes

The electrochemical response of two-dimensional networks of pristine single-wall carbon nanotubes (SWNTs) has been investigated. SWNTs were grown by catalyzed chemical vapor deposition on an insulating SiO2 substrate, and then electrically contacted by lithographically defined Au electrodes. Subsequent insulation of the contact electrodes enabled the electrochemical properties of the SWNT network to be isolated and directly studied for the first time. The electrochemical activity of the SWNT network was found to be strongly dependent on the applied potential. For the same SWNT electrode, the limiting current for the oxidation of 5 mM Fe(phen)32+ was found to be much greater than expected based on the signal for the reduction of 5 mM Ru(NH3)63+. Simultaneous conductance and electrochemical measurements demonstrated decreasing conductance as the potential was scanned negative (versus Ag/AgCl) with the minimum conductance at around the reduction potential for Ru(NH3)63+. These results are consistent with the presence of both metallic and semiconducting SWNTs in the SWNT network electrode. Moreover, these results show that through appropriate choice of mediator and electrode potential, metallic SWNTs can be electrochemically addressed independently of semiconducting SWNTs.