Sm_(0.5)Sr_(0.5)CoO_3阴极氧还原动力学

利用极化、交流阻抗技术考察了担载于La0.9Sr0.1Ga0.8Mg0.2O3(LSGM)电解质上的Sm0.5Sr0.5CoO3-La0.8Sr0.2Ga0.8Mg0.15Co0.05O3(SSC-LSGMC5)复合阴极的氧还原反应动力学.在SSC-LSGMC5阴极氧还原反应的阻抗谱中可以观察到明显的两个半圆.高频环的电导与氧分压无关,低频环的电导正比于氧分压的0.5次方.并且低频环的氧分压级数随着反应温度的降低而减小,可能对应于吸附氧原子的扩散过程.SSC-LSGMC5极化曲线与经典的Butler-Volmer方程吻合.阴、阳极的电荷转移系数均为1左右,交换电流密度的氧分压级数为1/4,对应于电荷转移过程.实验结果显示SSC-LSGMC5上的氧还原反应机制随反应条件的不同而发生变化.     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.     

Open-framework Borophosphate:(NH4)_(0.5)Fe~II_(0.5)Fe~III_(0.5)(H_2O)_2BP_2O_8·0.5H_2O

We are investigating the synthesis and properties of a new class of open framework borophosphate solids with the goal of being able to use in optical devices and magnetic materials. Only a few open-framework ferric borophosphate compounds with a chiral tetraheda-tetraheda helices, KFe(H2O)2BP2O8)H2O(1), Fe(H2O)2BP2O8H2O(2), (NH4)0.4-FeII0.55FeIII0.5(H2O)[BP2O8]0.6H2O(3) have been reported by Boy et al.1, Ylmaze et al.2 and Huang and Schfer et al.3. However, Huang and Schfer et…     

Bi_(0.5)Na_(0.5)TiO_3的制备及光催化性能研究

以Bi(NO3)3·5H2O、Na OH、Ti(OC4H9)4为原料,采用水热法制备Bi0.5Na0.5Ti O3纳米光催化剂。用XRD、TEM表征了Bi0.5Na0.5Ti O3光催化剂的结构和形貌。以亚甲基蓝为模型污染物,考察了不同浓度的Na OH对Bi0.5Na0.5Ti O3晶体在紫外光和可见光照射下光催化活性的影响。通过荧光技术研究了Bi0.5Na0.5Ti O3光催化剂表面羟基自由基的生成,探究了清除剂对光催化降解污染物活性的影响。结果表明:Na OH的浓度对Bi0.5Na0.5Ti O3光催化剂的紫外光和可见光活性有很大的影响,当Na OH浓度为8mol·L-1时制备的Bi0.5Na0.5Ti O3晶体光催化活性最高,光照1h,亚甲基蓝的紫外及可见光催化降解率分别达到69.8%、53.4%,在光催化降解过程中·O2ˉ和·OH起主要作用,尤其是·O2-起了重要作用。     

Novel Ba_(0.5)Sr_(0.5)Fe_(0.8)Zn_(0.2)O_(3-δ) membranes for POM

A novel cobalt-free perovskite based on Ba_(0.5)Sr_(0.5)Fe_(0.8)Zn_(0.2)O_(3-δ)(BSFZ)were prepared by EDTA-citric acid method.The lattice constants of the BSFZ perovskite were characterized by in situ high-temperature X-ray diffraction(HTXRD).The thermal expansion coefficient of BSFZ is 10.5×10~(-6)K~(-1),which is lower than that of cobalt-based perovskite materials.The BSFZ membrane was also used to construct reactors for the partial oxidation of methane(POM)to syngas.Results show that the BSFZ membrane...     

THE PREPARATION,STRUCTURE AND PROPERTES OF Sr_(0.5)Ca(0.5)CuO_2

Sr_(0.5)Ca_(0.5)CuO_2 has been synthesized by the solid state reaction.Thecompound crystallizes in an orthorhombic unit cell,space group D_(2h)~(17)-Cmcmwith a=3.444 ,b=16.11 ,c=3.868 .It decomposes shove 1038℃.Sr_(0.5)Ca_(0.5)CuO_2 is s black p-type semiconductor with resistivity 53Ω.cmat room tempersture.     

KTa_(0.5)Nb_(0.5)O_3电子结构的第一性原理研究

用全电势线性缀加平面波法 (FLAPW )计算了KTa0 .5Nb0 .5O3 铁电相和顺电相的态密度、能带结构 .通过对两相态密度的对比分析我们发现在铁电相 ,钽原子的d电子和氧原子的 2p电子以及铌原子d电子与氧原子的 2p电子之间存在强烈的轨道杂化 ,对能带的分析也得出同样的结论 .这种轨道杂化对KTa0 .5Nb0 .5O3 铁电性的稳定有着重要的意义 .钽原子在四方铁电体KTa1 xNbxO3 中的作用与在纯钽酸钾中的作用有明显的差别 .     

La_(0.5)Na_(0.5)TiO_3纳米晶的制备及光致发光研究

以硬脂酸、硝酸镧、氢氧化钠和钛酸四丁酯为原料制备了La0 .5Na0 .5TiO3 纳米晶 ,粒度最小可达 1 4nm ,烧成温度为 50 0℃ ,低于传统固相反应的合成温度。光致发光研究表明 :用 392nm光作激发光 ,在室温下观察到了一个强的蓝光发射带 ,并且它的强度和半宽度随粒度发生明显变化。     

KTa_(0.5)Nb_(0.5)O_3电子结构的第一性原理研究

用全电势线性缀加平面波法（FLAPW）计算了KTa_(0.5)Nb_(0.5)O_3铁电相和 顺电相的态密度、能带结构。通过对两相态密度的对比分析我们发现在铁电相，钽 原子的d电子和氧原子的2p电子以及铌原子d电子与氧原子的2p电子之间存在强烈的 轨道杂化，对能带的分析也得出同样的结论。这种轨道杂化对KTa_(0.5)Nb_(0.5) O_3铁电性的稳定有着重要的意义。钽原子在四方铁电体KTa_(1-x)Nb_xO_3中的作 用与在纯钽酸钾中的作用有明显的差别。     

钙钛矿锰氧化物(La_(1-x)Gd_x)_(0.5)Sr_(0.5)MnO_3的磁电阻效应

采用传统的高温固相法制备了多晶样品(La1-xGdx)0.5Sr0.5MnO3(x=0,0.1,0.2,0.3,0.4),利用X射线衍射仪(XRD)、超导量子磁强计(SQUID)、标准四端引线法分别对样品结构、磁性、电性以及磁电阻效应进行了研究。研究表明:Gd的少量替代并没有引起结构变化;随着Gd含量的增加,所有样品的居里温度TC和金属-绝缘体转变温度Tp都降低了;在TC附近发现了磁电阻效应,同时在低温下发现了更大的磁电阻;并且Gd的少量替代可使磁电阻MR增大。     

La_(0.5)Pr_(0.5)Ni_(0.7)Co_(0.3)O_3在乙醇水蒸气重整中催化性能研究

用共沉淀法制备了La_(0.5)Pr_(0.5)Ni_(0.7)Co_(0.3)O_3钙钛矿氧化物催化剂,用XRD、SEM、TPR、TG等对La_(0.5)Pr_(0.5)Ni_(0.7)Co_(0.3)O_3钙钛矿氧化物的晶相结构、还原性能及反应50 h后的La_(0.5)Pr_(0.5)Ni_(0.7)Co_(0.3)O_3钙钛矿氧化物表面积碳情况进行了分析,同时用微反色谱装置在不同的反应温度条件下的La_(0.5)Pr_(0.5)Ni_(0.7)Co_(0.3)O_3钙钛矿氧化物的初活性、氢气平均选择性和积碳性能进行了探讨。结果表明,La_(0.5)Pr_(0.5)Ni_(0.7)Co_(0.3)O_3钙钛矿氧化物在乙醇水蒸气重整反应中具有较好的低温初活性和氢气的选择性,乙醇的平均转化率和氢气的选择性随着反应温度的升高而增大。当温度大于550℃时,转化率增幅不大,氢气的平均选择性在600℃时有所下降。反应温度升高催化剂的积碳量有所增多,积碳主要是不定型碳。     

Pd/CuO-Ce_(0.5)Mn_(0.5)O_2催化氧化合成葡萄糖醛酸及其内酯

用柠檬酸络合法制备了掺杂铈锰复合金属氧化物载体,采用沉淀法负载活性组分钯得到催化剂Pd/CuO-Ce0.5Mn0.5O2,用XRD、SEM和XPS对催化剂结构进行了表征分析,考察了不同CuO掺入量对葡甲苷的伯羟基选择氧化合成葡萄糖醛酸及其内酯的催化活性的影响。结果表明,CuO的掺入对载体的孔结构及活性组分在载体表面的分散都得到了不同程度的改善;Ce-Cu-Mn的协同作用有利于提高Pd的氧化还原性能。当CuO添加量为9%及Pd负载量为0.5%时,葡萄糖醛酸及其内酯的总收率可达70%。     

High performance and stability of double perovskite-type oxide NdBa_(0.5)Ca_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ) as an oxygen electrode for reversible solid oxide electrochemical cell

In this study,we successfully synthesized double perovskite-type oxide NdBa_(0.5)Ca_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(NBCCF) using a conventional wet chemical method as the oxygen electrode for reversible solid oxide electrochemical cells (RSOCs).The polarization resistance (R_p) of the composite electrode NBCCFGd_(0.1)Ce_(0.9)O_2 (GDC) is only 0.079Ωcm~2 at 800℃under air.The single cell based on NBCCF-GDC electrode displays a peak power density of 0.941 W/cm~2 in fuel cell mode and a low R_p value of 0.134Ωcm~2.In electrolysis cell mode,the cell displays an outstanding oxygen evolution reaction (OER) activity and shows current density as high as 0.92 A/cm~2 with 50 vol%AH (Absolute Humidity) at 800℃and applied voltage of 1.3 V.Most importantly,the cell exhibits admirable durability of 60 h both in electrolysis mode and fuel cell mode with distinguished reversibility.All these results suggest that NBCCF is a promising candidate electrode for RSOC.     

Hydrothermal Synthesis of Pb_(1-1.5x)La_xZr_(0.5)Ti_(0.5)O_3 (x = 0.01-0.06) Nanocrystallites

Lanthanum doped lead zirconate titanate (PLZT) ceramics display excellent electrooptic and photostriction properties because of the existence of cavities in the perovskite structure1-3. The PLZT powders are conventionally prepared by solid state reaction4-5, and the wet chemical methods such as sol-gel techniques are then introduced6-7. However, the homogeneity, morphology and size of the particles, which greatly affect the sinterability and the property of the resulting ceramics, are dif…     

铁掺杂浓度对Ba_(0.5)Sr_(0.5)Co_xFe(1-x)O(3-δ)混合导体膜性质的影响

用湿化学法合成了Ba0 .5Sr0 .5CoxFe1 xO3 δ系列混合导体透氧膜材料 ,并用XRD ,O2 TPD ,H2 TPR和透氧测定等手段考察了铁离子掺杂浓度对导体膜相结构及其稳定性、氧脱附性能和透氧能力等的影响 .在氧浓度为 2 .13× 10 4 ～ 0 .1Pa的范围内 ,x =0 .2～ 0 .8时材料保持为立方钙钛矿结构 .铁含量的增加有利于材料钙钛矿结构在低温的稳定化 ,并提高了材料的热化学稳定性 .然而 ,导体膜的透氧量却随着铁含量的增加而减小 .这可能是由于导体膜表面的氧交换动力学过程在透氧速率控制步骤中的分量随铁含量的增加而变大之故     

Redox chemistry and magnetism of LaSrM(0.5)Ru(0.5)O(4±δ) (M = Co, Ni and Zn) Ruddlesden-Popper phases

The n = 1 Ruddlesden-Popper (RP) phases LaSrM(0.5)Ru(0.5)O(4±δ) (M = Co, Ni and Zn) have been prepared by solid state reactions and structurally characterized by powder X-ray and electron diffraction. All the samples adopt the tetragonal I4/mmm space group with random M and Ru cation occupation on the B-sites. The potential causes of no cation ordering are discussed. A combined analysis of the tolerance factors, the distortion of the octahedral coordination of M and Ru cations and the magnetic interactions between M and Ru cations provide a better understanding for forming a phase with 3D cation ordering on the B-sites in the n = 1 RP phases. The investigation of XPS spectra suggests that the transition element species exist as mixed ion pairs, Ru((4-δ)+)-Ru(4+)? Co(2+)-Co(3+) in LaSrCo(0.5)Ru(0.5)O(4), and Ru(4+)-Ru((4+δ)+)? Ni(+)-Ni(2+) in LaSrNi(0.5)Ru(0.5)O(4), which is consistent with cation disorder over the B sites. LaSrCo(0.5)Ru(0.5)O(4) shows a weakly ferromagnetic behaviour below 50 K; LaSrNi(0.5)Ru(0.5)O(4) is evidenced by the presence of long-range magnetic ordering at a Néel temperature of 125 K, and LaSrZn(0.5)Ru(0.5)O(4) exhibits a paramagnetic behaviour down to 5 K. Due to atomic disorder, Ru4d, O2p covalent coupling is weakened, strengthening the intraatomic spin-spin coupling among the π* electrons. Charge transfer between Ru and Co or Ru and Ni, as well as the increasing overlap of both nearest-neighbour and next-nearest-neighbour Ru 4d electrons due to atomic disorder, favour the formation of ferromagnetic interactions. Although antiferromagnetism is dominant, particularly in LaSrNi(0.5)Ru(0.5)O(4), ferromagnetic interactions are stronger in the title compounds than in the related La(2)MRuO(6) (M = Co, Ni) double perovskites where the B-site cations are ordered.     

由钯纳米溶胶制备Pd/Ce_(0.5)Zr_(0.5)O_2催化剂及其表征研究

采用超声膜扩散还原法制备出金属Pd纳米溶胶,然后从Pd纳米溶胶出发,采用不同方法制备出系列纳米Pd/Ce0.5Zr0.5O2催化剂。采用TEM观察Pd纳米粒子的形貌,采用N2吸/脱附,XRD,TPR和ICP对Pd/Ce0.5Zr0.5O2催化剂进行表征,并考察比较了各催化剂对CO+O2的催化活性差别,结果表明:先制备Pd纳米溶胶,再负载于载体上的方法制得的催化剂金属负载量较低,但是其活性最高,CO在150℃就能完全转化,金属分散度较高,活性Pd物种还原温度低,催化剂的CO低温活性与H2还原温度和金属分散度有关。这种催化剂制备方法为在提高催化剂活性的同时降低贵金属用量提供了可能。     

聚苯胺/Co_(0.5)Zn_(0.5)Fe_2O_4纳米复合材料的制备及电磁性能

采用高分子凝胶法制备尖晶石型Co0.5Zn0.5Fe2O4,原位聚合法制备纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4纳米复合材料.使用傅立叶红外光谱(FTIR)、紫外可见吸收光谱(UV-Vis)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对复合材料进行了表征.FTIR和XRD的结果表明样品为纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4.UV-Vis光谱表明聚苯胺/Co0.5Zn0.5Fe2O4苯环上的π-π*和n-π*分别红移了23nm和5nm.TEM照片可知,聚苯胺和聚苯胺/Co0.5Zn0.5Fe2O4粒子的平均粒径分别约为50nm和70nm.在8.2～12.4GHz测试频率范围内,聚苯胺/Co0.5Zn0.5Fe2O4的ε″数值在9.2～12.3之间,u″数值在0.15～0.16之间;聚苯胺/Co0.5-Zn0.5Fe2O4介电损耗低于纯聚苯胺,而磁损耗高于纯聚苯胺.     

Efficient CO_2 Electrolysis with Fluorite Structure Nanoparticles Modified Perovskite Structure La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_(3-δ) Cathode

Perovskite structure La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_(3-δ)(LSCM) cathode with unique structure can electrolyze CO_2 to CO in solid oxide electrolysers(SOEs).However,the cell performance is restricted by its electro-catalysis activity.In this work,fluorite structure nanoparticles(CeO_(2-δ)) are impregnated on LSCM cathode to improve the electro-catalysis activity.X-ray diffraction(XRD),scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) together approve that the fluorite structure nanoparticles are uniformly distributed on the perovskite structure LSCM scaffold.Electrochemical measurements illustrate that direct CO_2 electrolysis with 10%mol CeO_(2-δ) impregnated LSCM cathode exhibits excellent performance for current density(0.5 A×cm~(-2)) and current efficiency(～95%) at 800 ℃ under 1.6 V.It is believed that the enhanced performance of directed CO_2 electrolysis may be due to the synergetic effect of fluorite structure CeO_(2-δ) nanoparticles and perovskite structure LSCM ceramic electrode.     

草酸盐共沉淀法制备锂离子电池正极材料LiNi_(0.5)Mn_(0.5)O_2及其电化学性能

使用草酸盐共沉淀法合成了LiNi0.5Mn0.5O2,并研究了共沉淀时的pH条件对终产物的结构、形貌及电化学性能的影响.采用X射线衍射(XRD)和扫描电镜(SEM)表征了在pH值为4.0、5.5、7.0和8.5时得到的共沉淀和终产物LiNi0.5Mn0.5O2的结构和形貌.使用充放电实验研究了不同pH条件下得到的LiNi0.5Mn0.5O2的电化学性能.结果表明,pH为7.0时,合成的材料颗粒更小、分布最均匀,材料具有良好的层状特征,且材料中锂镍的混排程度最小.电化学测试结果印证了pH为7.0时合成的材料具有更好的电化学性能,在0.1C的倍率下,材料的首次放电比容量达到了185 mAh.g-1,在循环20周后,放电比容量仍然保持在160 mAh.g-1.X射线光电子能谱(XPS)测试结果表明,pH为7.0时合成的LiNi0.5Mn0.5O2中Ni为+2价,Mn为+4价.