Magnetic-sensitive behavior of intelligent ferrogels for controlled release of drug

An intelligent magnetic hydrogel (ferrogel) was fabricated by mixing poly(vinyl alcohol) (PVA) hydrogels and Fe3O4 magnetic particles through freezing-thawing cycles. Although the external direct current magnetic field was applied to the ferrogel, the drug was accumulated around the ferrogel, but the accumulated drug was spurt to the environment instantly when the magnetic fields instantly switched "off". Furthermore, rapid to slow drug release can be tunable while the magnetic field was switched from "off" to "on" mode. The drug release behavior from the ferrogel is strongly dominated by the particle size of Fe3O4 under a given magnetic field. The best "magnetic-sensitive effects" are observed for the ferrogels with larger Fe3O4 particles due to its stronger saturation magnetization and smaller coercive force. Furthermore, the amount of drug release can be controlled by fine-tuning of the switching duration time (SDT) through an externally controllable on-off operation in a given magnetic field. It was demonstrated that the highest burst drug amounts and best "close" configuration of the ferrogel were observed for the SDT of 10 and 5 min, respectively. By taking these peculiar magnetic-sensitive characteristics of the novel ferrogels currently synthesized, it is highly expected to have a controllable or programmable drug release profile that can be designed for practical clinical needs.     

Radiation curing of intelligent coating for controlled release and permeation

Intelligent membranes for pH and temperature-responsive drug releases were developed by coating and curing of polymer-drug composite film with electrolyte or N-isopropyl acrylamide curable mixture. It was proved that those intelligent membranes showed the stimule-sensitive and responsive release functions and could be produced efficiently by radiation curing prosessing with a conveyer system.     

Enhancing cell membrane phase separation for inhibiting cancer metastasis with a stimuli-responsive DNA nanodevice

Phase separation in cell membranes promotes the assembly of transmembrane receptors to initiate signal transduction in response to environmental cues. Many cellular behaviors are manipulated by promoting membrane phase separation through binding to multivalent extracellular ligands. However, available extracellular molecule tools that enable manipulating the clustering of transmembrane receptors in a controllable manner are rare. In the present study, we report a DNA nanodevice that enhances membrane phase separation through the clustering of dynamic lipid rafts. This DNA nanodevice is anchored in the lipid raft region of the cell membrane and initiated by ATP. In a tumor microenvironment, this device could be activated to form a long DNA duplex on the cell membrane, which not only enhances membrane phase separation, but also blocks the interaction between the transmembrane surface adhesion receptor and extracellular matrix, leading to reduced migration. We demonstrate that the ATP-activated DNA nanodevice could inhibit cancer cell migration both in vitro and in vivo. The concept of using DNA to regulate membrane phase separation provides new possibilities for manipulating versatile cell functions through rational design of functional DNA structures.

A DNA nanodevice is developed to enhance the cell membrane phase separation in a tumor microenvironment to weaken the formation of focal adhesion. As a result, the migration of cancer cells is inhibited both in vitro and in vivo.     

A Liouville equation for systems which exchange particles with reservoirs: transport through a nanodevice

A Redfield-like Liouville equation for an open system that couples to one or more leads and exchanges particles with them is derived. The equation is presented for a general case. A case study of time-dependent transport through a single quantum level for varying electrostatic and chemical potentials in the leads is presented. For the case of varying electrostatic potentials the proposed equation yields, for the model study, the results of an exact solution.     

Selective ionization for elemental analysis with an ion trap mass spectrometer

The ion storage capacity (<10⁶) of ion trap mass spectrometers (ITMS) can sometimes limit the ability to analyze trace components in complex mixtures. We demonstrate here that resonant laser ablation (RLA) can offer a degree of selectivity in the ionization process, thus allowing the preferential accumulation of analyte ions in the trap. Selectivities of 75 and 50, for chromium and iron, respectively, are reported here for RLA of stainless steel in an ITMS. We offer suggestions to improve both the selectivity and the ionization efficiency, relative to the results reported here.     

Hydrophilic core-shell microspheres: a suitable support for controlled attachment of proteins and biomedical diagnostics

Functional hydrophilic microspheres (latex particles) have found various applications in life sciences and in medicine - particularly in latex diagnostic tests. This paper presents a comprehensive review of studies on latex particles with a hydrophilic interfacial layer composed of various hydrophilic polymers with reactive groups at the ends of macromolecules or at each monomeric unit along the chain. Typical examples of these hydrophilic polymers are poly(2-hydroxyethyl methyl methacrylate), poly(acrylic acid), poly(N,N-dimethylacrylamide), polysaccharides, poly(ethylene oxide) and polyglycidol. Hydrophilic microspheres with different morphologies (uniform or core-shell, see Figure) have been synthesized by emulsion and dispersion polymerizations. The chemical structure of polymers which constitute the interfacial layer of microspheres has been investigated using a variety of instrumental techniques (such as XPS, SSIMS and NMR) and analytical methods based on specific chemical reactions suitable for the determination of particular functional groups. Microspheres are exposed to contact with proteins in the majority of medical applications. This paper presents examples of studies on the attachment of these biomacromolecules to microspheres. The relation between the structure of the interfacial layer of microspheres and the ability of these particles for the covalent binding of proteins is discussed. Several examples of diagnostic tests, in which hydrophilic microspheres with adsorbed or covalently immobilized proteins were used as reagents, are presented. The paper also contains a short review of the application of magnetic hydrophilic particles for protein separation. Examples of hydrophilic latex particles used for hemoperfusion or heavy metal ion separation are presented. Hydrophilic microspheres with uniform or core-shell morphologies.     

Synthesis and characterization of novel optically active polyarylene vinylenes with controlled effective conjugation length

New chiral and soluble binaphthyl derivatives (12 and 13) endowed with carboxaldehyde or cyanomethyl functional groups have been prepared as suitable building blocks for the synthesis by Knoevenagel condensation of a series of optically active block copolymers (1-7) with controlled effective conjugation length. A variety of functionalized co-monomers (14-19) have been prepared by different synthetic procedures to be used in further polymerization reactions with binaphthyl derivatives 12 and 13. Depending upon the nature of the co-monomers, it is possible to tune the wavelength of the new polymers, which is very close to that of the respective repeating units. Fluorescence measurements on polymers 1-3 reveal a strong blue-green emission with Stokes shifts of 74-107 nm. Theoretical calculations at the semiempirical AM-1 level have been carried out on model compounds, and the calculated torsion angles are in agreement with the electronic spectra data. Finally, the redox properties of the polymers prepared (1-7) were determined by cyclic voltammetry, and an amphoteric behavior with oxidation potentials ranging from 1.1 to 1.6 V and reduction potentials close to -1.5 V was found.     

Selective multiplex advantage with an electro-optic Hadamard transform spectrometer for multielemental atomic emission

A liquid-crystal spatial light-modulator Hadamard transform spectrometer is adapted for multielemental atomic spectrochemical analysis. The flame emissions of alkali metals are studied as a preliminary example. The multiplex disadvantage normally plaguing application of Hadamard and Fourier transform methods to atomic analysis is circumvented. Permanent electro-optic "closure" of certain Hadamard mask slits (corresponding to intense major element emissions) improves the signal-to-noise ratio (SNR) of the remaining trace element emissions. This approach to SNR enhancement of weaker spectral features by blocking known intense features is called the selective multiplex advantage. A problem with the contrast ratio (relative transmissions of the transparent and opaque states) of the liquid-crystal Hadamard mask has been identified in terms of "optical leakage". This produces an offset in the Hadamard encodegram, and leads to concentration-dependent baseline-offset effects in the transformed spectrum. A mathematical correction procedure was devised and evaluated experimentally.     

A project for an intelligent system: Vision and learning

One of the most critical aspects of a truly intelligent system is the ability to learn, that is, to improve its own functionality by interacting with the environment and exploring it. In this paper, we argue that learning from exploring the environment should be the main goal in developing artificial intelligence. We also argue in favor of an integrated system—combining several state-of-the-art aspects of artificial intelligence, such as speech, vision, natural language, expert systems—as the experimental platform with which to approach this problem. We then describe the main features of a project of this type, MAIA, which is under development at I.R.S.T. The vision components of the system will be discussed in some detail, especially the navigation architecture of the indoor robot available to MAIA. We will conclude outlining some initial learning problems that will be approached within the MAIA project, such as learning to recognize faces and learning to update the map of the Institute used for indoor navigation.     

氟的离子选择电极瞬时电位法测定

研究了氟离子选择电极瞬时电位分析法，其检出限和Nernst响应下限均低于传统电位分析法，空白液切换到试液时瞬时电位达到稳定的峰电位Vp比传统电位法的响应快得多，可以实现小体积试液的快速准确分析；用该法测定了自来水和矿泉水中氟的含量；利用校正曲线的截距和检出限计算了LaF3的溶度积，在0.1mol/L KNO3介质中Ksp(LaF3)=10^-28.45，在0.001mol/L柠檬酸钠＋HAc-NaAc缓冲液（pH=5.50，离子强度I＝0.10mol/L)介质中溶度积K′sp(LaF3)=10^-26.26；据此，计算得柠檬酸与La^3 络合物的稳定常数K1=10^5.46和K2=10^3.99；用离子水合吉氏自由能ΔGh(F^-,g)解释了不同浓度F^-试液瞬时电位的跃迁时间。     

Development of a tabletop time-of-flight mass spectrometer with an ion attachment ionization technique

We report a new type of mass spectrometry based on a time-of-flight mass spectrometer combined with an ion attachment ionization technique (IA-TOF). In contrast to electron ionization mass spectra, IA-TOF mass spectra are not complicated by peaks due to fragmentation of the molecular ion; the adduct ion formed in IA does not fragment. We developed a tabletop IA-TOF system and evaluated its performance by analyzing specimens originally in the gas, liquid, and solid phases. We obtained fragment-free spectra covering a mass range up to m/z 3400 with a mass resolution of about 4700. Our IA-TOF system realizes accurate and versatile real-time mass spectrometry.     

Multivalent nanofibers of a controlled length: regulation of bacterial cell agglutination

Control of the size and shape of molecular assemblies on the nanometer scale in aqueous solutions is very important for the regulation of biological functions. Among the well-defined supramolecular structures of organic amphiphiles, one-dimensional nanofibers have attracted much attention because of their potential applications in biocompatible materials. Although much progress has been made in the field of self-assembled nanofibers, the ability to control the fiber length remains limited. The approach for control of the fiber length presented herein overcomes this limitation through the coassembly of amphiphilic rod-coil molecules in which the crystallinity of the aromatic segment can be regulated by π-π stacking interactions. The introduction of carbohydrate segments into the fiber exterior endows the nanofibers with the ability to adhere to bacterial cells. Notably, the fiber length systematically regulates the agglutination and proliferation of bacterial cells exposed to these fibers.     

Covalent attachment of glucose oxidase to an Au electrode modified with gold nanoparticles for use as glucose biosensor

A feasible method to fabricate glucose biosensor was developed by covalent attachment of glucose oxidase (GOx) to a gold nanoparticle monolayer modified Au electrode. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of ferrocyanide followed and confirmed the assemble process of biosensor, and indicated that the gold nanoparticles in the biosensing interface efficiently improved the electron transfer between analyte and electrode surface. CV performed in the presence of excess glucose and artificial redox mediator, ferrocenemethanol, allowed to quantify the surface concentration of electrically wired enzyme (Gamma(E)(0)) on the basis of kinetic models reported in literature. The Gamma(E)(0) on proposed electrode was high to 4.1 x 10(-12) mol.cm(-2), which was more than four times of that on electrode direct immobilization of enzyme by cystamine without intermediate layer of gold nanoparticles and 2.4 times of a saturated monolayer of GOx on electrode surface. The analytical performance of this biosensor was investigated by amperometry. The sensor provided a linear response to glucose over the concentration range of 2.0 x 10(-5)-5.7 x 10(-3) M with a sensitivity of 8.8 microA.mM(-1).cm(-2) and a detection limit of 8.2 microM. The apparent Michaelis-Menten constant (K(m)(app)) for the sensor was found to be 4.3 mM. In addition, the sensor has good reproducibility, and can remain stable over 30 days.     

Selective formation of covalent protein heterodimers with an unnatural amino acid

We report a strategy for the generation of heterodimeric protein conjugates using an unnatural amino acid with orthogonal reactivity. This paper addresses the challenges of site-specificity and homogeneity with respect to the synthesis of bivalent proteins and antibody-drug conjugates. There are numerous antibody-drug conjugates in preclinical and clinical development, yet these are based either on nonspecific lysine coupling chemistry or on disulfide modification made difficult by the large number of cysteines in antibodies. Here, we describe a recombinant approach that can be used to rapidly generate a variety of constructs with defined conjugation sites. Moreover, this methodology results in homogeneous antibody conjugates whose biological, physical, and pharmacological properties can be quantitatively assessed and subsequently optimized. As proof of concept, we have generated anti-Her2 Fab-Saporin conjugates that demonstrate excellent potency in vitro.     

Selective attachment and release of a chemotherapeutic agent from the interior of a protein cage architecture

The antitumor agent doxorubicin was covalently bound and selectively released in a pH dependent manner from the interior surface of a genetically modified small heat shock protein (Hsp) cage.     

Selective gas-chromatographic detection using an ion-selective electrode-II Selective detection of fluorine compounds

Components in samples are separated on a gas chromatography column using hydrogen as carrier gas. The individual components from the column are passed through a platinum tube heated at 1000 degrees , where they undergo hydrogenolysis, and fluorine compounds are converted into hydrogen fluoride. The hydrogen fluoride is dissolved in a slow stream of an absorption solution, and the fluoride ion concentration in the resulting solution is monitored in a flow-cell with a fluoride ion electrode. The potentiometric output of the cell is converted into a signal, which is proportional to the concentration of fluoride ion, by an antilogarithmic converter, and recorded. The response of the detector to fluorine compounds was about 10,000 times that to an equal quantity of other organic compounds, and 5 x 10(-11) mole of fluorobenzene could be detected.     

Selective effect of guest molecule length and hydrogen bonding on the supramolecular host structure

A host supramolecular structure consisting of bis-(2,2':6',2' '-terpyridine)-4'-oxyhexadecane (BT-O-C16) is shown to respond to guest molecules in dramatic ways, as observed by using scanning tunneling microscopy (STM) on a highly oriented pyrolytic graphite surface under ambient conditions. It is observed that small linear molecules can be encapsulated within the host supramolecular lattice. The characteristics of the host structure were nearly unaffected by the encapsulated guest molecules of terphthalic acid (TPA) dimers, whereas appreciable changes in cavity dimension can be observed with azobenzene-4,4'-dicarboxylic acid. The STM study and density functional theory (DFT) analysis reveal that intermolecular hydrogen bonding interaction plays an essential role in forming the assembling structures. The difference in guest molecule length is considered the important cause for the different guest-host complexes.