Optical band gap and optical constants in a-Se80Te20−xPbx thin films

The optical constants (absorption coefficient, refractive index, extention coefficient, real and imaginary part of dielectric constant) have been studied for a-Se₈₀Te_20−xPb_x (where x = 0, 2, 6, 10) thin films as a function of photon energy in the wave length range (500–1000 nm). It has been found that the optical band gap increases while the refractive index and the extinction coefficient (k) decreases on incorporation of lead in Se–Te system. The value of absorption coefficient (α) and the extinction coefficient (k) increases, while the value of refractive index (n) decreases with incident photon energy. The results are interpreted in terms of the change in concentration of localized states due to the shift in fermi level.     

Electrical and optical properties of GexFexSe100−2x chalcogenide thin films

Optical absorption at room temperature and electrical conductivity at temperatures between 283 and 333 K of vacuum evaporated Ge_xFe_xSe_100−2x (0≤x≤15) amorphous thin films have been studied as a function of composition and film thickness. It was found that the optical absorption is due to indirect transition and the energy gap increases with increasing both Ge and Fe content; on the other hand, the width of the band tail exhibits the opposite behavior. The optical band gap E_opt was found to be almost thickness independent. The electrical conductivity show two types of conduction, at higher temperature the conduction is due to extended states, while the conduction at low temperature is due to variable range hopping in the localized states near Fermi level. Increasing Ge and Fe contents were found to decrease the localized state density N(E_F), electrical conductivity and increase the activation energy for conduction, which is nearly thickness independent. Variation of the atomic densities ρ, molar volume V, glass transition temperature T_g cohesive energy C.E and number of constraints N_Co with average coordination number Z was investigated. The relationship between the optical gap and chemical composition is discussed in terms of the cohesive energy C.E, average heat of atomization and coordination numbers.     

Effect of annealing temperature on the optical and electrical properties of amorphous As45.2Te46.6In8.2 thin films

The optical absorption of the As-prepared and annealed As_45.2Te_46.6In_8.2 thin films are studied. Films annealed at temperatures higher than 453 K show a decrease in the optical energy gap (E_o). The value of E_o increases from 1.9 to 2.43 eV with increasing thickness of the As-prepared films from 60 to 140 nm. The effect of thickness on high frequency dielectric constant (?_∞) and carrier concentration (N) is also studied. The crystalline structures of the As_45.2Te_46.6In_8.2 thin films resulting from heat treatment of the As-prepared film at different elevated temperatures is studied by X-ray diffraction. An amorphous-crystalline transformation is observed after annealing at temperatures higher than 453 K. The electrical conductivity at low temperatures is found due to the electrons transport by hopping among the localized states near the Fermi level. With annealing the films at temperatures higher than 473 K (the crystallization onset temperature) for 1 h, the electrical conductivity increases and the activation energy decreases, which can be attributed to the amorphous-crystalline transformations.     

Effect of Y2O3 addition on the conductivity and elastic modulus of (CeO2)1 − x(YO1.5)x

The conductivity and elastic modulus of (CeO₂)_1 − x(YO_1.5)_x for x values of 0.10, 0.15, 0.20, 0.30, and 0.40 were investigated by experiments and molecular dynamics simulations. The calculated conductivity exhibited a maximum value at approximately 15 mol% Y₂O₃; this trend agreed with that of the experimental results. In order to clarify the reason for the occurrence of the maximum conductivity, the paths for the transfer of oxygen vacancies were counted. The numerical result revealed that as the content of Y₂O₃ dopant increases, the number of paths for the transfer of oxygen vacancies decreases, whereas the number of oxygen vacancies for conductivity increases. Thus, the trade-off between the increase in the number of vacancy sites and the decrease in the vacancy transfer was considered to be the reason for the maximum conductivity occurring at the Y₂O₃ dopant content of approximately 15 mol%. The calculated elastic modulus also exhibited a minimum value at approximately 20 mol% Y₂O₃, which also agreed with the experimental results. It was shown that the Y–O–Y bonding energy increased with the increasing content of Y₂O₃ dopant. Thus, the trade-off between the increase in the number of vacancy sites and that in the Y–O–Y bonding energy was considered to be the reason for the minimum elastic modulus occurring at the Y₂O₃ dopant content of approximately 20 mol%.     

Dispersive optical constants of a-Se100−xSbx films

Thin films of amorphous Se_100−xSb_x (x=5,10 and 20 at%) system are deposited on a silicon substrate at room temperature (300 K) by thermal evaporation technique. The optical constant such as refractive index (n) has been determined by a method based on the envelope curves of the optical transmission spectrum at normal incidence by a Swanpoel method. The oscillator energy (E_o), dispersion energy (E_d) and other parameters have been determined by the Wemple–DiDomenico method. The absorption coefficient (α) has been determined from the reflectivity and transmitivity spectrum in the range 300–2500 nm. The optical-absorption data indicate that the absorption mechanism is a non-direct transition. We found that the optical band gap, E_g^opt, decreases from 1.66±0.01 to 1.35±0.01 eV with increase Sb content.     

Effect of Bi2O3 on EPR, optical transmission and DC conductivity of vanadyl doped alkali bismuth borate glasses

Glasses with composition xBi₂O₃·(30−x)M₂O·70B₂O₃ (M=Li, Na) containing 2 mol% V₂O₅ have been prepared over the range 0≤x≤15 (x is in mol%). The electron paramagnetic resonance spectra of VO²⁺ of these glasses have been recorded in the X-band (≈9.3 GHz) at room temperature (RT≈300 K). Spin Hamiltonian parameters, g_∥, g_⊥, A_∥, A_⊥, dipolar hyperfine coupling parameter, P, and Fermi contact interaction parameter, K, have been calculated. The molecular orbital coefficients, α² and γ², have been calculated by recording the optical transmission spectra. In xBi₂O₃·(30−x)Li₂O·70B₂O₃ glasses there is decrease in the tetragonality of the V⁴⁺O₆ complex for x up to 6 mol% whereas for x≥6 mol%, tetragonality increases. In xBi₂O₃·(30−x)Na₂O·70B₂O₃ glasses there is increase in the tetragonality of the V⁴⁺O₆ complex with increasing x. The 3d_xy orbit expands with increase in Bi₂O₃:M₂O ratio. Values of the theoretical optical basicity, Λ_th, have also been reported. The DC conductivity increases with increase in temperature. The order of conductivity is 10⁻⁵ ohm⁻¹ m⁻¹ at low temperature and 10⁻³ ohm⁻¹ m⁻¹ at high temperature. The DC conductivity decreases and the activation energy increases with increase in Bi₂O₃:M₂O ratio.     

Synthesis of earth-abundant Cu2SnS3 powder using solid state reaction

Cu₂SnS₃ (CTS) powder has been synthesized at 200 °C by solid state reaction of pastes consisting of Cu and Sn salts and different sulphur compounds in air. The compositions of the products is elucidated from XRD and only thiourea is found to yield CTS without any unwanted CuS_x or SnS_y. Rietveld analysis of Cu₂SnS₃ is carried out to determine the structure parameters. XPS shows that Cu and Sn are in oxidation states +1 and +4, respectively. Morphology of powder as revealed by SEM shows the powder to be polycrystalline with porous structure. The band gap of CTS powder is found to be 1.1 eV from diffuse reflectance spectroscopy. Cu₂SnS₃ pellets are p-type with electrical conductivity of 10⁻² S/cm. The thermal degradation and metal–ligand coordination in CTS precursor are studied with TGA/DSC and FT-IR, respectively, and a probable mechanism of formation of CTS has been suggested.     

Study of phase transition in ZrO2 doped with Pb3O4

Electrical conductivity of ZrO₂ doped with Pb₃O₄ has been measured at different temperatures for different molar ratios (x=0, 0.01, 0.02, 0.03, 0.04, 0.05 and 0.06). The conductivity increases due to migration of vacancies, created by doping. The conductivity increases with increase in temperature till 180 °C and thereby decreases due to collapse of the fluorite framework. A second rise in conductivity at higher temperatures beyond 500-618 °C is due to phase transition of ZrO₂. DTA and X-ray powder diffraction were carried out for confirming doping effect and transition in ZrO₂.The addition of Pb₃O₄ to ZrO₂ shifted the phase transition of ZrO₂ due to the interaction between Pb₃O₄ and ZrO₂.     

Crystal structure, electronic and transport properties of AgSbSe2 and AgSbTe2

Undoped and p- and n-doped AgSbX₂ (X=Se and Te) materials were synthesized by direct fusion technique. The structural properties were investigated by X-ray diffraction and SEM microscopy. The electrical conductivity, thermal conductivity and Seebeck coefficient have been measured as a function of temperature in the range from 300 to 600 K.To enlighten electron transport behaviours observed in AgSbSe₂ and AgSbTe₂ compounds, electronic structure calculations have been performed by the Korringa-Kohn-Rostoker method as well as KKR with coherent potential approximation (KKR-CPA) for ordered (hypothetical AgX and SbX as well as AgSbX₂ approximates) and disordered systems (Ag_1−xSb_xX), respectively. The calculated density of states in the considered structural cases shows apparent tendencies to opening the energy gap near the Fermi level for the stoichiometric AgSbX₂ compositions, but a small overlap between valence and conduction bands is still present. Such electronic structure behaviour well agrees with the semimetallic properties of the analyzed samples.     

Electronic structures of mixed ionic-electronic conductors SrCoOx

Electronic structures of SrCoO_x with x=3, 2.875 and 2.75 were calculated by DFT technique in SLDA approximation. Two kinds of oxygen vacancy ordering with energies of 0.22 and 0.01 eV lower in comparison with random vacancy distribution were revealed. The transition between these ordered vacancy systems with the activation energy 0.34 eV can be a step in the ionic conductivity mechanism. The calculated ion charges, magnetic moments and electron density of states were used to analyze chemical bonding in the crystals. All calculated compounds have metal electronic conductivity.     

Zn incorporation and (CuIn)1−xZn2xSe2 thin film formation during the selenization of evaporated Cu and In precursors on Al:ZnO coated glass substrates

CuInSe₂ thin films with typical 1.0 eV gap energy and tetragonal chalcopyrite structure have been obtained on soda–lime glass substrates by the reaction of sequentially evaporated Cu and In layers with elemental selenium vapor, at 500 °C in flowing Ar. When analogous deposition and reaction processes were performed on Al:ZnO coated glasses, some increment in the band gap energy and diminution in the crystalline interplanar spacings have been detected for the resulting films with an extent that depends on the Cu/In atomic ratio of the evaporated precursor layers. This fact has been related to Zn incorporation into the selenized film, with quaternary (CuIn)_1−xZn_2xSe₂ compound formation that is influenced by the presence of copper selenide phases during the reaction process. Such deductions are supported by the optical, structural and compositional characterizations that have been performed comparatively on samples prepared by selenization of evaporated metallic precursors with two different Cu/In ratios (0.9 and 1.1) on bare and Al:ZnO coated glass substrates.     

Effect of composition and thermal annealing on the absorption and electrical conduction of Se85−xTe15Sbx glasses

The optical absorption of the as-prepared and thermally annealed Se_85−xTe₁₅Sb_x (0≤x≤9) thin films was measured. The mechanism of the optical absorption follows the rule of non-direct transition. The optical energy gap (E₀) decreased from 1.12 to 0.84 eV with increasing Sb content of the as-prepared films from 0 to 9 at.%. The as-prepared Se₇₆Te₁₅Sb₉ films showed an increase in (E₀) with increasing the temperature of annealing in the range above T_g (363 K). The electrical conductivity of the as-prepared and annealed films was found to be of Arrhenius type with temperature in the range 300-360 K. The activation energy for conduction was found to decrease with increasing both the Sb content and temperature of annealing. The results were discussed on the basis of the lone-pair electron effect and of amorphous crystalline transformation.     

A theoretical investigation of the special properties of SrFe1−xCoxO3

Using density-functional calculations, we investigate the special properties of SrFe_1−xCo_xO₃. The results show that the ground states have A-type antiferromagnetic order for x=0.1 and ferromagnetic order for x≥0.2 with Co ions distributed averagely. SrFe_1−xCo_xO₃ exhibits half-metallic nature for 0.2≤x≤0.7 and full-metallic nature for other values of x, and the half-metallic gap decreases with increasing x. The tunneling between the half-metallic ferromagnetic phases drives the large magnetoresistance. In addition, the Co cations are in the intermediate-spin state, while the Fe cations are in the intermediate-spin state for x≤0.5 and the high-spin state for x≥0.6.     

Microwave dielectric properties of high quality factor La(Mg0.5−xCaxSn0.5)O3 ceramics

The microwave dielectric properties of La(Mg_0.5−xCa_xSn_0.5)O₃ ceramics were examined with a view to their exploitation for wireless communications. The La(Mg_0.5−xCa_xSn_0.5)O₃ ceramics were prepared by the conventional solid-state method with various sintering temperatures. The La(Mg_0.5−xCa_xSn_0.5)O₃ ceramics contained Ca₂SnO_4, CaSnO₃, and La₂O₃. The amount of Ca₂SnO₄ increased with increasing sintering temperature. However, the relative amount of CaSnO₃ decreased with increasing sintering temperature. An apparent density of 6.52 g/cm³, a dielectric constant (ε_r) of 20.2, a quality factor (Q×f) of 80,500 GHz, and a temperature coefficient of resonant frequency (τ_f) of −79 ppm/°C were obtained for La(Mg_0.4Ca_0.1Sn_0.5)O₃ ceramics that were sintered at 1500 °C for 4 h.     

First-principles studies on Ti3Si0.5Ge0.5C2 under pressure

The structural, electronic and elastic properties of Ti₃Si_0.5Ge_0.5C₂ have been investigated by using the pseudopotential plane-wave method within the density-functional theory. Our calculated equation of state (EOS) is consistent with the experimental results. The density of states (DOS) indicates that Ti₃Si_xGe_1−xC₂ (x=0, 0.5, 1.0) are metallic, and these compounds have nearly the same electrical conductivity. The elastic constants for Ti₃Si_0.5Ge_0.5C₂ are obtained at zero pressure, which is compared to Ti₃SiC₂ and Ti₃GeC₂. We can conclude that Ti₃Si_0.5Ge_0.5C₂ is brittle in nature by analyzing the ratio between bulk and shear moduli. There appears to be little effect on the electronic and elastic properties with the Ge substitution to Si atoms in Ti₃SiC₂.     

Electrical properties of perovskite-type La(Cr1−xMnx)O3+δ

Perovskite-type La(Cr_1−xMn_x)O_3+δ (0.0x1.0) was synthesized using a sol–gel process. The crystal structure of La(Cr_1−xMn_x)O_3+δ changes from orthorhombic to rhombohedral at x=0.6. The Mn⁴⁺ ion content increases monotonically in the range 0.2x1.0. The magnetic measurement of La(Cr_1−xMn_x)O_3+δ indicates that a Mn³⁺ ion is a high-spin state with (d)³(dγ)¹. The variation of the average (Cr, Mn)-O distance is explained by ionic radii of the Cr³⁺, the Mn³⁺, the Mn⁴⁺ ions. Since the log σT–1/T curve is linear and the Seebeck coefficient (α) is independent of temperature, it is considered that La(Cr_1−xMn_x)O_3+δ is a p-type semiconductor and exhibits the hopping conductivity.     

Structural properties and Raman spectroscopy of orthorhombic (Eu1−xPrx)0.6Sr0.4MnO3 (0≤x≤1.0)

The effect of Pr doping on structural properties and room temperature Raman spectroscopy measurements is investigated in manganites (Eu_1−xPr_x)_0.6Sr_0.4MnO₃ (0≤x≤1.0) with fixed carrier concentration. The result of the Rietveld refinement of x-ray powder diffraction shows that these compounds crystallize in an orthorhombic distorted structure with a space group Pnma. It is evident that, with increasing Pr substitution, three types of orthorhombic structures can be distinguished. The phonon frequencies of the three main peaks, in room temperature Raman-scattering measurements, have been discussed together with their structural characteristics, such as bond-length, bond-angles, and the change of orthorhombic structure type. With the increase of Pr content, the mode at 491  cm⁻¹ also shows a corresponding change. A step effect becomes evident, which seems to indicate the close dependence between the frequency shift of this mode and the change in crystal symmetry. This further supports the notion that the mode at 491  cm⁻¹ is closely correlated with the Jahn–Teller distortion. Moreover, we have found that the lowest frequency peak (assigned as an A_1g phonon mode) depends linearly on the tolerance factor t.     

Electrical and magnetic features in the perovskite-type system Y(Co, Mn)O3

Electrical and magnetic properties of the perovskite-type solid solution YCo_xMn_1−xO₃ (x=0.20-0.60) have been studied at different temperatures and magnetic fields. Electrical conductivity measurements show a semi-conducting behaviour throughout the solid solution. The room-temperature conductivity increases with the Co content up to 33 at.%, and then decreases. The effective moment in the paramagnetic state shows a non-monotonic decrease, when the Co content increases. In the ordered state, the behaviour at low or null magnetic fields corresponds to a spin-glass or antiferromagnetic system, with a transition temperature, which raises with the Co content (up to 50 at.% Co), and then decreases. At high fields, all the solid solutions show a ferromagnetic behaviour, although there is a marked difference in their ferromagnetic cycles, at a threshold value of 33 at.% Co.     

Photoconductivity of Se85−xTe15Hgx thin films

The photoconductive properties such as dark conductivity, steady state and transient characteristics of a-Se_85−xTe₁₅Hg_x thin films, prepared by thermal vacuum evaporation technique have been studied in the temperature range 312–380 K. Analysis of data shows that the activation energy of dark current is greater as compared to the activation energy of photocurrent. The activation energy increases at higher concentration of Hg which shows that the defect density of states decreases. Analysis of intensity dependent photoconductivity shows that the bimolecular recombination is predominant. The transient photoconductivity shows that the carrier lifetime decreases with the increase in Hg concentration and increases at higher concentration of Hg. This decrease is due to the transition trapping process. Further the photosensitivity and carrier lifetime increases at higher concentration of Hg which also confirms that the density of defect states decreases.     

Complex impedance spectroscopic analysis of Mn-modified Pb(Zr0.65Ti0.35)O3 electroceramics

The polycrystalline samples of Pb(Zr_0.65−xMn_xTi_0.35)O₃ (PZMT) (x=0, 0.05, 0.10, 0.15) were prepared by a high-temperature solid-state reaction technique. Detailed studies on the effect of compositional variation of manganese (Mn) on the electrical behavior (complex impedance Z*, complex modulus M*, electrical conductivity and relaxation mechanisms) of the PZMT systems have been carried out by a nondestructive complex impedance spectroscopy (CIS) technique at 400 °C. The Nyquist plots suggest that the grains only are responsible in the conduction mechanism of the materials. The occurrence of single arc in the complex modulus spectrum of all the compositions of Mn confirms the single-phase characteristics of the PZMT compounds, and also confirms the presence of non-Debye type of multiple relaxation in the material.