新型锌铝水滑石紫外吸收剂的制备和紫外性能研究

以有机紫外吸收剂2-苯基苯并咪唑-5-磺酸(PBSA)、N,N-二甲氨基苯甲酸(DABA)为有机原料,采用共沉淀法,合成了有机紫外吸收剂插层水滑石Zn2Al-LDH/PBSA和Zn2Al-LDH/DABA,并测定了所得到的样品的XRD、FT IR、薄膜紫外吸收性质和氧化催化活性。结果表明,当有机紫外吸收剂以阴离子的形式进入水滑石层间后,仍有良好的紫外吸收性能并在可见光区有很好的透光性;通过测定插层水滑石的氧化催化活性,与纯有机物相比,Zn2Al-LDH/PBSA和Zn2Al-LDH/DABA的氧化催化活性明显降低。合成的新型的插层水滑石有望在防晒产品中得到应用。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

层板剥离水滑石的制备及影响因素

采用阴离子表面活性剂N-月桂酰基谷氨酸(LG)为插层分子，研究了烷烃-LG-水(O/W)微乳液中烷烃量的变化对插层水滑石层间距的影响，同时研究了烷烃分子大小和水滑石层板阳离子不同对水滑石剥离难易程度的影响。实验表明，随着微乳液中烷烃含量的增加，制备得到了由插层到层板剥离的水滑石，并且烷烃的链长越长，水滑石的剥离越容易实现。层板化学组成对剥离难易程度也有影响，难易程度依次是Mg/Al-LDH，Zn/Al-LDH和Ni/Al-LDH。     

Optimum conditions for intercalation of lacunary tungstophosphate(V) anions into layered Ni(II)-Zn(II) hydroxyacetate

Acetate containing nickel-zinc hydroxysalts (LHS-Ni-Zn) have been synthesized by coprecipitation and hydrothermal treatment. The acetate anions were exchanged with PW₁₂O₄₀³⁻ anions, and optimum conditions to attain the maximum level of W in the compound have been identified. The W intercalated compound was characterized by powder X-ray diffraction, FT-IR spectroscopy, thermogravimetric and differential thermal analyses, scanning electron microscopy and transmission electron microscopy.The exchange of LHS-Ni-Zn with PW₁₂O₄₀³⁻ at pH=3 for 72 h leads to a solid with a basal spacing of 9.62 Å and a W content (weight) of 37%. The hydrothermal treatment at 90 °C for 24 h increases this value to 48% with a W/Zn molar ratio of 1.38, which corresponds to a layered compound with lacunary tungstophosphate anions in the interlayer space. The intercalated solid is stable up to 250 °C, the layer structure collapses on dehydroxylation and amorphous compounds were identified at 500 °C. Two crystalline phases, NiO (rock salt) and a solid solution (Zn_1−xNi_x)WO₄, were identified by powder X-ray diffraction at high temperature (ca. 1000 °C).     

熔融插层法制备LLDPE/MgAl-LDH 剥离型纳米复合材料及其热性能研究

The interlayer surface of MgAl layered double hydroxide （MgAl-LDH） was modified by exchanging about half of the interlayer nitrate anions by dodecyl sulfate anions （DS） to get MgAl（H-DS） LDH, and then the MgAl（H-DS） was melt intercalated by LLDPE to get the LLDPE/MgAl-LDH exfoliation nanocomposites. The samples were characterized by Fourier transform infrared （PTIR） spectroscopy, X-ray diffraction （XRD）, ion chromatography, transmission electron microscopy （TEM）, and thermogravimetry analysis （TGA）. The nanoscale dispersion of MgAl-LDH layers in the LLDPE matrix was verified by the disappearance of （001） XRD reflection of the modified MgAl-LDH and by the TEM observation. The TGA profiles of LLDPE/MgAl-LDH nanocomposites show a faster charring process between 210 and 370 ℃ and a higher thermal stability above 370 ℃than LLDPE. The decomposition temperature of the nanocomposites with 10 wt% MgAl（H-DS） can be 42 ℃ higher than that of LLDPE at 40% weight loss.     

Preparation and thermal decomposition study of pyridinedicarboxylate intercalated layered double hydroxides

Supramolecular 2,3- and 2,5-pyridinedicarboxylate (PDC) intercalated ZnAl-layered double hydroxides (2,3- and 2,5-PDC–ZnAl–LDHs) have been prepared by ion exchange method. The structure and composition of the intercalated materials have been studied by X-ray diffraction (XRD) and inductively coupled plasma emission spectroscopy (ICP). The study indicates that the 2,3-PDC and 2,5-PDC anions are accommodated as interdigitated bilayer and monolayer arrangement respectively between the sheets of LDHs. Furthermore, their thermal decomposition processes were studied by the use of in situ high temperature X-ray diffraction (HT-XRD), and the combined technique of thermogravimetry-differential thermal analysis-mass spectrometry (TG-DTA-MS) under N2 atmosphere. Based on the comparison study on the temperatures of both decarboxylation and complete decomposition of interlayer PDC, it can be concluded that 2,5-PDC–ZnAl–LDHs has higher thermal stability than that of 2,3-PDC–ZnAl–LDHs.     

Fourier Transform Infrared Spectra of Naphthalene Disulfonates between Layers of Mg and Al double Hydroxide: Intercalation by Means of Coprecipitation and Direct Observation of Coordination from the Interlayer Anion to the Metal Cation in the Layer

A Mg/Al-layered double hydroxide with interlayernaphthalene-2,6-disulfonate having a basal spacing of1.68 nm was prepared by means of the coprecipitationmethod. The results of powder X-ray diffractionare compared with those of other intercalates whichhave interlayer naphthalene disulfonates. Fouriertransform infrared spectra of the LDH intercalatedcompounds reveal that the organic molecules located inthe interlayer region are stable. Coordinationfrom the oxygen atom in the –SO₃ ^- group of the interlayer molecules to the metal cation in the layeris observed.     

Biopolymer-layered polysilicate micro/nanocomposite based on chitosan intercalated in magadiite

On the basis of their high adsorption and cation exchange capacity, swelling potential and low toxicity, layered sodium silicate magadiite (Na–magadiite) is an attractive solid for intercalation of polymers. This study envisages the intercalation of cationic biopolymer chitosan (Chit) in Na–magadiite to prepare a Chit/magadiite micro/nanocomposite. Characterisation of starting-magadiite, pure chitosan and Chit/magadiite were investigated using powder X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy and thermal analysis. XRD confirmed that the chitosan had been intercalated into the interlayer space of magadiite by increasing the basal spacing, d₀₀₁ from 15.6 Å to 21.45 Å. The presence of characteristic bands of biopolymer and layered silicate in Chit/magadiite were confirmed by FTIR analysis. The thermal stability of micro/nanocomposite was evaluated by thermogravimetry analysis. The results suggested the formation of electrostatic interactions by protonated amine groups with the negatively charged magadiite surface as well as intercalation in the form of a predominant monolayer arrangement of chitosan chains in layered silicate magadiite.     

Characterisation of organoclays and adsorption of p-nitrophenol: environmental application

Organoclays were synthesised through ion exchange of a single surfactant for sodium ions, and characterised by a range of method including X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and transmission electron microscopy (TEM). The change in surface properties of montmorillonite and organoclays intercalated with the surfactant, tetradecyltrimethylammonium bromide (TDTMA) were determined using XRD through the change in basal spacing and the expansion occurred by the adsorbed p-nitrophenol. The changes of interlayer spacing were observed in TEM. In addition, the surface measurement such as specific surface area and pore volume was measured and calculated using BET method, this suggested the loaded surfactant is highly important to determine the sorption mechanism onto organoclays. The collected results of XPS provided the chemical composition of montmorillonite and organoclays, and the high-resolution XPS spectra offered the chemical states of prepared organoclays with binding energy. Using TGA and FT-IR, the confirmation of intercalated surfactant was investigated. The collected data from various techniques enable an understanding of the changes in structure and surface properties. This study is of importance to provide mechanisms for the adsorption of organic molecules, especially in contaminated environmental sites and polluted waters.     

酸性黄25插层水滑石薄膜的制备及其性能研究

采用原位生长法在铝片基底表面制备了ZnAl-NO3-LDHs水滑石薄膜,以其为前驱体,在弱酸性条件下通过离子交换反应将酸性黄25阴离子插层至ZnAl-LDHs/Al薄膜层间,制备了酸性黄25插层水滑石薄膜,并采用XRD、SEM、FTIR、TG-DTA、UV-Vis和色差计等手段对薄膜进行了表征。XRD和FTIR表征结果表明,酸性黄25阴离子成功地插层到了水滑石薄膜层间,ZnAl-LDHs的层间距由0.87 nm增加到2.96 nm,NO3-阴离子在1 384 cm-1处的特征吸收峰消失,同时出现了酸性黄25阴离子的特征吸收峰。SEM照片显示,水滑石晶片主要以c轴平行于铝片基底生长。TG-DTA分析、UV-Vis分析、色差分析和紫外光老化结果表明,插层后酸性黄25阴离子的耐热性和耐光性均得到了提高。     

Dodecyl sulfate-hydrotalcite nanocomposites for trapping chlorinated organic pollutants in water

A series of hybrid organic-inorganic nanocomposite materials was synthesized by three different procedures using sodium dodecyl sulfate (DDS) and magnesium-aluminum layered double hydroxide (Mg/Al LDH with a Mg/Al molar ratio of 2 to 5). Both the pH of the exchange medium (6.5 to 10) and the Mg/Al molar ratio of the LDH affected the basal spacing, the content of DDS retained and the orientation of the DDS chains within the interlamellar space. For LDH with higher charge density (Mg/Al=2 and 3), DDS molecules likely formed a perpendicular monolayer within the LDH interlayer and the solution pH had little effect on the basal spacing, with a mean and standard deviation of 25.5+/-0.4 A. However, for LDH with lower charge density (Mg/Al=4 and 5), DDS molecules more likely formed an interpenetrating bilayer, and the basal spacing significantly increased with increasing pH, with a mean and standard deviation of 32.7+/-5.2 A. Sorption of trichloroethylene and tetrachloroethylene by DDS-LDH varied with synthesis conditions, LDH type and DDS configuration in the interlayer. DDS-Mg(3)Al-LDH had the highest affinity for both trichloroethylene and tetrachloroethylene in water, either comparable to or as much as four times higher than other clay-derived sorbents, followed by DDS-Mg(4)Al-LDH and DDS-Mg(5)Al-LDH. DDS-Mg(2)Al-LDH had the lowest sorption affinity although the highest amount of DDS. The pH of the exchange solution also affected the amount of DDS retained by the LDH as well as the sorption efficiency. Mg(3)Al-LDH has a charge equivalent area of 32.2 A(2)/charge, which allows the formation of optimal DDS configuration within its interlayer, thus resulting in the highest affinity for the chlorinated compounds. The DDS-Mg/Al-LDHs can be easily synthesized either ex situ or in situ at low temperature, indicating the feasibility of practical applications. The results obtained by controlling the synthesis procedure suggest that different arrangements of DDS molecules in the LDH interlayers can be obtained and optimized for the sorption of specific sorbates.     

Zirconium and hafnium hydrogen monothiophosphates, H2Zr(PO3S)2 and H2Hf(PO3S)2. Syntheses and selective ion-exchange properties of sulfur-containing analogues of H2M(PO4)2 (M = Zr, Hf)

The reactions between aqueous solutions of M4+ (M = Zr, Hf) and PO3S3- each result in the precipitation of a white gel that can be dried to a powder. Elemental analysis results for the white polycrystalline product yield a stoichiometry of H2M(PO3S)2. These new compounds are characterized by thermal analysis (DSC, TG-MS), vibrational spectroscopy (FT-IR, FT-Raman), 31P MAS NMR spectroscopy, energy-dispersive spectroscopy (EDS), and powder X-ray diffraction (XRD). On the basis of the characterizations and the results of trialkylamine intercalation experiments, we conclude that the H2M(PO3S)2 compounds have a layered structure that is likely similar to that of alpha-H2Zr(PO4)2.H2O. The interlayer spacing for both H2M(PO3S)2 compounds, determined by XRD, is approximately 9.4 A. Our characterization results suggest that the sulfur atom of each PO3S3- group is preferentially pointed into the interlayer region of the compound and is protonated. Two of the many potentially interesting properties of H2Zr(PO3S)2, its ion-exchange capacity and selectivity, are investigated. H2Zr(PO3S)2 is demonstrated to be an effective and recyclable ion-exchange material for both Zn2+(aq) and Cd2+(aq). Mass balance experiments indicate that the removal of Cd2+(aq) and Zn2+(aq) ions by solid H2Zr(PO3S)2 occurs by an ion-exchange process. Ion exchange results in the formation of the new compounds H0.2Cd0.9Zr(PO3S)2 and H0.50Zn0.75Zr(PO3S)2. The extraction of metal ions is monitored by XRD, vibrational spectroscopy, and elemental analysis. H2Zr(PO3S)2 reversibly intercalates Zn2+(aq) ions through three complete cycles of intercalation and deintercalation without any loss of ion-exchange capacity.     

Application of simplified version of advanced isoconversional procedure in non-isothermal kinetic study

Thermogravimetric analysis (TG) and powder X-ray diffraction (PXRD) were used to study some selected Mg/Al and Zn/Al layered double hydroxides (LDHs) prepared by co-precipitation. A Mg/Al hydrotalcite was investigated before and after reformation in fluoride and nitrate solutions. Little change in the TG or PXRD patterns was observed. It was proposed that successful intercalation of nitrate anions has occurred. However, the absence of any change in the d ₍₀₀₃₎ interlayer spacing suggests that fluoride anions were not intercalated between the LDH layers. Any fluoride anions that were removed from solution are most likely adsorbed onto the outer surfaces of the hydrotalcite. As fluoride removal was not quantified it is not possible to confirm that this has happened without further experimentation. Carbonate is probably intercalated into the interlayer of these hydrotalcites, as well as fluoride or nitrate. The carbonate most likely originates from either incomplete decarbonation during thermal activation or adsorption from the atmosphere or dissolved in the deionised water. Small and large scale co-precipitation syntheses of a Zn/Al LDH were also investigated to determine if there was any change in the product. While the small scale experiment produced a good quality LDH of reasonable purity; the large scale synthesis resulted in several additional phases. Imprecise measurement and difficulty in handling the large quantities of reagents appeared to be sufficient to alter the reaction conditions causing a mixture of phases to be formed.     

FT-IR and FT-Raman spectroscopic investigations of adsorption of 2,2′-biquinoline by smectite group clay minerals from Anatolia

The sorption of 2,2′-biquinoline onto natural and ion-exchanged montmorillonite (Fe-, Co- or Cu-montmorillonite) and saponite from Anatolia have been investigated using FT-IR and FT-Raman Spectrometry. The intercalation of 2,2′-biquinoline within natural and ion-exchanged montmorillonite and saponite has been shown by X-ray diffraction to increase the interlayer spacing. The difference of basal spacing of air-dried clays and biquinoline treated ones shows monolayer arrangement. Raman spectroscopy was particularly useful for investigation of clay-organic interaction. Vibrational spectroscopy indicates that intercalated 2,2′-biquinoline molecules are coordinated to exchangeable cations (directly and indirectly through water bridges) and/or Lewis acid sites or as bidentate ligand.     

Covalent Grafting of Ethylene Glycol into the Zn-Al-CO(3) Layered Double Hydroxide

Zn-Al-CO(3) layered double hydroxide was synthesized at room temperature using a procedure reported elsewhere. After characterization, 0.5 g of the Zn-Al-CO(3) layered compound was reacted under air with 15 cm(3) of ethylene glycol at 80 degrees C for a period of 5 days. After washing with acetone and drying at 50 degrees C, the resulting white powder was characterized by X-ray powder diffraction, thermal analysis (simultaneous TG/DSC), elemental analysis (C, H, N, Al, and Zn content), and FTIR spectroscopy. All of the experimental data were consistent with the bidentade grafting of ethylene glycol into the interlayer surface of the Al-Zn double hydroxide. The stoichiometry obtained [Zn(0.66)Al(0.34)(OCH(2)CH(2)O)](OH)(0.34).0.4H(2)O] showed that all of the surface hydroxide groups were replaced by ethylene glycol through Al-(Zn)-O-C bonds. Carbonate could not be detected by FTIR, proving that OH(-) was probably the actual intercalated counteranion. Copyright 2000 Academic Press.     

Immobilization of oxomolybdenum species in a layered double hydroxide pillared by 2,2'-bipyridine-5,5'-dicarboxylate anions

A Zn,Al layered double hydroxide (LDH) with Zn/Al = 1.45 and containing nitrate anions was prepared by coprecipitation and characterized by powder X-ray diffraction, Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS), thermogravimetric analysis, FTIR and FT Raman spectroscopy, and (27)Al MAS NMR spectroscopy. Three Zn...O and four Zn...M (M = Zn, Al) shells could be fitted to the low-temperature (40 K) EXAFS spectrum, in accordance with a model for an ordered cationic sheet. The nitrate anions were easily exchanged by 2,2'-bipyridine-5,5'-dicarboxylate anions, resulting in an increase in the basal spacing from 9 to 18 A. The basal spacing of the pillared derivative indicates that the anions are arranged with their longest dimension nearly perpendicular to the host layers. This material exhibits a high encapsulating ability, as evidenced by its interaction with a dichloromethane solution of the dioxomolybdenum(VI) complex MoO(2)Cl(2)(THF)(2). A material with a metal loading of 11.2 wt % was obtained. Molybdenum K-edge EXAFS analysis could not substantiate the formation of a supported complex of the type MoO(2)Cl(2)(N-N) but instead indicated the formation of unidentate-bridged entities of the type [O(2)Mo-O-MoO(2)] with a metal-metal separation of 3.29 A. The molybdenum-containing LDH was active as a catalyst for the liquid-phase epoxidation of cis-cyclooctene, 1-octene, and trans-2-octene using tert-butyl hydroperoxide as the oxygen source, yielding the corresponding epoxides as the only products. For reactions carried out with no additional solvent (other than n-decane) or in the presence of 1,2-dichloroethane, the solid catalyst could be recycled with no major loss of activity. Other tests confirmed that the systems functioned as true heterogeneous catalysts.     

大黄素/Mg-Al-LDHs纳米杂化物的制备及缓释性能研究

以Mg-Al型层状双金属氢氧化物(Mg-Al-LDHs)为载体,将大黄素分子通过二次组装法成功插入其层间,得到大黄素/Mg-Al-LDHs纳米杂化物。XRD结果显示,Mg-Al-LDHs粒子层间距由0.48 nm增大到3.35 nm。差热曲线(DTA曲线)分析结果表明,该纳米杂化物分子中大黄素的分解温度比纯大黄素的分解温度高50℃。分别在pH 4.8和pH 7.5的缓冲溶液中测定了大黄素/LDHs的缓释性能,结果表明大黄素/LDHs的药品释放速率明显低于二者的物理混合物,并探讨了释放机理。     

An Indigo Carmine‐Based Hybrid Nanocomposite with Supramolecular Control of Dye Aggregation and Photobehavior

Zn‐Al layered double hydroxides (LDHs) containing solely indigo carmine (IC) or 1‐hexanesulfonate (HS) anions, or a mixture of the two with different HS/IC molar ratios, were prepared by the direct synthesis method and characterized by various techniques. Hydrotalcite‐type phases were obtained with basal spacings of 17.6 Å for the LDH intercalated by IC (IC‐LDH) and 18.2–18.3 Å for the other materials containing HS. From the basal spacing for IC‐LDH and UV/Vis spectroscopic data, it is proposed that the dye molecules assemble within the interlayer galleries to form a J‐type stacking arrangement. A comprehensive electronic spectral and photophysical study was undertaken for IC in solution and all materials, aiming to obtain a detailed characterization of the host–guest and guest–guest interactions. In solution (the solvent surrounded “isolated” molecule), IC presents a fast excited state proton transfer with rate constants of ～1.2–1.4×10¹¹ s^?1, which is linked to the very efficient radiationless deactivation channel. In the solid state it is shown that incorporation of IC within the LDH decreases the level of aggregation, and that further addition of HS induces the appearance of isolated IC units within the LDH galleries. The indigo carmine‐based nanocomposites reported constitute a step forward in the design of hybrid materials with tunable properties.     

四苯基卟啉在改性磷酸锆层间的插入及荧光增强

近年来,出于节约一次性能源的考虑,人们已经加大对太阳能等天然资源的利用,致力于模拟天然光合作用的研究[1￣3],而光合作用中的捕光复合物又称为光子天线。光子天线中往往存在一种或几种猝灭剂,猝灭剂吸收光子后产生激发态的能量可以在不同分子或者同一分子的不同生色团之间转移,转移出能量的一方为能量给体,另一方为能量受体。