Extraction and <Emphasis Type="Italic">ab initio</Emphasis> calculation studies on the complexation of Ca<Superscript>2+</Superscript> with valinomycin

From extraction experiments and γ-activity measurements, the exchange extraction constant corresponding to the equilibrium Ca²⁺ (aq)+1·Sr²⁺ (nb) ⇆ 1·Ca²⁺ (nb) + Sr²⁺ (aq) taking place in the two-phase water-nitrobenzene system (1 = valinomycin; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (Ca²⁺, 1·Sr²⁺) = 2.4±0.1. Further, the stability constant of the valinomycin-calcium complex (abbrev. 1·Ca²⁺) in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Ca²⁺) = 8.3±0.1. By using quantum mechanical DFT calculations, the most probable structure of the 1·Ca²⁺·2H₂O complex species was predicted. In this complex, the “central” Ca²⁺ cation is bound by strong bonds to two oxygen atoms of the respective water molecules and to four ester carbonyl oxygens of the parent valinomycin ligand 1. Finally, the calculated binding energy of the considered complex 1·Ca²⁺·2H₂O is −319.2 kcal/mol, which confirms the relatively high stability of this cationic complex species.     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Scalar-relativistic 5f-in-core pseudopotentials and core-polarization potentials for trivalent actinides: calibration calculations for Ac<Superscript>3+</Superscript>, Cm<Superscript>3+</Superscript> and Lr<Superscript>3+</Superscript> complexes

The performance of recently proposed 5f-in-core pseudopotentials for the trivalent actinides was investigated in calculations for model complexes An³⁺L ⁿ⁻ for three selected actinides (An³⁺ = Ac³⁺, Cm³⁺, Lr³⁺) and eight simple ligands with atoms from the first three periods of the table of elements (L ⁿ⁻ = F⁻, Cl⁻, OH⁻, SH⁻, CO, NH₂⁻, H₂O, H₂S, NH₃). Results of Hartree-Fock and Coupled Cluster with singles, doubles and perturbative triples calculations using basis sets of quadruple-zeta quality are compared to corresponding reference data obtained with scalar-relativistic energy-adjusted 5f-in-valence small-core pseudopotentials. The inclusion of core-polarization potentials in the 5f-in-core pseudopotential calculations and corrections of the basis set superposition error by the counterpoise correction leads to very good agreement between the 5f-in-valence and 5f-in-core pseudopotential results for bond lengths, bond angles and binding energies. Results from 5f-in-core pseudopotential calculations using different density functionals also show reasonable agreement with the more rigorous Coupled Cluster results. It is argued that the An 5f rather than the An f population is a useful criterion for the applicability of a specific An 5f-in-core pseudopotential.     

A Thermodynamic Study on the Binding of Calcium Ion with Myelin Basic Protein

The interaction of myelin basic protein (MBP) from the bovine central nervous system with divalent calcium ion was studied by isothermal titration calorimetry at 27 °C in aqueous solution. The extended solvation model was used to reproduce the enthalpies of Ca²⁺-MBP interaction over the whole range of Ca²⁺ concentrations. The solvation parameters recovered from the solvation model were attributed to the structural change of MBP due to the metal ion interaction. It was found that there is a set of two identical and non-interacting binding sites for Ca²⁺ ions. The association equilibrium constant is 0.021 μmol⋅dm⁻³. The molar enthalpy of binding is ΔH=−15.10 kJ⋅mol⁻¹.     

Sorption behavior of Am<Superscript>3+</Superscript> on suspended pyrite

Sorption behavior of ²⁴¹Am (~10⁻⁹ M) on naturally occurring mineral pyrite (particle size: ≤70 μm) has been studied under varying conditions of pH (2–11), and ionic strength (0.01–1.0 M (NaClO₄)). The effects of humic acid (2 mg/L), other complexing anions (1 × 10⁻⁴ M CO₃ ²⁻, SO₄ ²⁻, C₂O₄ ²⁻ and PO₄ ³⁻), di- and trivalent metal ions (1 × 10⁻³ M Mg²⁺, Ca²⁺ and Nd³⁺) on sorption behavior of Am³⁺ at a fixed ionic strength (I = 0.10 M (NaClO₄)) have been studied. The sorption of ²⁴¹Am on pyrite increased with pH from 2.8 (84%) to 8.1 (97%). The sorption of ²⁴¹Am decreased with ionic strength at low pH values (2 ≤ pH ≤ 4), but was insensitive in the pH range of 4–10, suggesting the formation of outer-sphere complexes on pyrite surface at lower pH, and inner-sphere complexes at higher pH values. The sorption of ²⁴¹Am increased in the presence of (i) humic acid (5 < pH < 7.5), and (ii) C₂O₄ ²⁻ (2 < pH < 3). By contrast, other complexing anions such as (carbonate, phosphate, and sulphate) showed negligible influence on ²⁴¹Am sorption. The presence of Mg²⁺, Ca²⁺ ions showed marginal effect on the sorption profile of ²⁴¹Am; while the presence of Nd³⁺ ion suppressed its sorption significantly under the conditions of present study. The sorption of ²⁴¹Am on pyrite decreased with increased temperature indicating an exothermic process.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Thermochemical Properties of Palladium(II) Chelates Involving Dialkyldithiocarbamates

The standard molar enthalpies of formation of crystalline dialkyldithiocarbamates chelates, [Pd(S₂CNR₂)₂], with R=C₂H₅, n-C₃H₇, n-C₄H₉ and i-C₄H₉, were determined through reaction-solution calorimetry in acetone, at 298.15 K. From the standard molar enthalpies of formation of the gaseous chelates, the homolytic (172.4±3.8, 182.5±3.2,150.9±3.1 and 162.6±3.1 kJ mol⁻¹) and heterolytic (745.0±3.8, 803.7±3.3,834.3±3.1 and 735.2±3.0 kJ mol⁻¹) mean palladium-sulphur bond-dissociation enthalpies were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mixed-ligand complexation of calcium and magnesium ions with heparin and glycine

Chemical equilibria in dilute aqueous solutions containing high-molecular-weight heparin (Na₄hep) and Glycine (HGly), as well as in solutions of the MCl₂-Na₄hep-HGly-H₂O-NaCl system (M = Ca²⁺, Mg²⁺) against the background of 0.15 M NaCl at 37°C, have been studied by mathematical modeling of chemical equilibria on the basis of pH-metric titration data. The model of equilibria of the Na₄hep-HGly-H₂O-NaCl system for the range 2.30 ≤ pH ≤ 10.50 at different ratios of initial heparin and glycine concentrations showed that, in the pH range of blood plasma stability (pH 6.80–7.40), the protonated H H₃hepGly₃⁴⁻ species prevailed. This was supported by UV absorption spectra of heparin and glycine solutions in the presence of 0.15 M NaCl and absorbance dynamics for solutions containing heparin and glycine. The results of modeling equilibria in the five-component MCl₂-Na₄hep-HGly-H₂O-NaCl systems (M = Ca²⁺, Mg²⁺) showed that the Ca²⁺ and Mg²⁺ ions form with heparin and glycine stable protonated mixed-ligand complexes M H₃hepGly₃²⁻. The formation constants of these species are one order of magnitude higher than the formation constants of the homoligand calcium and magnesium with heparin. In the pH range 6.80–7.40, the calcium content decreases depending on the ratio of the initial concentrations of Na₄hep, HGly, and CaCl₂: at the 1 : 3 : 1 ratio, it decreases by a factor of 5.7 owing to the formation of the predominant species CaH₃hepGly₃²⁻, and at equimolar amounts of the reagents (1 : 1 : 1), the calcium content decreases by a factor of 3.5 (the CaH₃hepGly₃²⁻ concentration is three time as low as the NaCahep⁻ concentration).     

Study on physicochemical properties of U<Superscript>3+</Superscript> in LiCl–KCl eutectic media at 773 K

In order to enhance the efficiency of pyrochemical technology, especially electrorefining process, physicochemical data of trivalent uranium in LiCl–KCl eutectic at 773 K were measured, including molar absorptivity, formal potential and diffusion coefficient of U³⁺ ions. The molar absorptivities of U³⁺ were determined to be 765 ± 48 and 686 ± 39 M⁻¹ cm⁻¹ at 465 and 550 nm, respectively. The formal potential of U³⁺/U⁴⁺ redox couple and diffusion coefficient of U³⁺ ions were measured to be −0.308 V vs. Ag/Ag⁺ and 8.7 × 10⁻⁶ M⁻¹ cm⁻¹, respectively. To elucidate the chemical behavior of U³⁺ ions under the existence of oxide ions, U³⁺ ions were reacted with oxides ions in situ produced at the LiCl–KCl media. Surprisingly, it was revealed from XRD patterns that UO₂ was formed from the reaction between U³⁺ ions and O²⁻ ions with the molar ratio of 1:1.     

Density functional theoretical study on attachment sites of Mg<Superscript>2+</Superscript> and Ca<Superscript>2+</Superscript> and metal ion affinity to Crenulatin molecule

Crenulatin (C₂₅H₂₀O₁₀) is a flavonol derivative and has been isolated from the roots of Rhodiola crenulata (Hook. F. et Thoms.), a widely used medicinal herb. Magnesium and calcium cations play an important physiological role in biological systems. In this work, interactions of magnesium and calcium divalent cations with Crenulatin molecule were studied. Density functional theory (DFT) was used to determine coordination geometries and absolute metal ion affinities (MIA) for all possible stable complexes. The results show that calcium and magnesium cations are able to interact with the Crenulatin molecule through mono-, bi-, and tricoordination. B3LYP/6-31G(d) bond energies for all complexes reveal that magnesium cation has a greater affinity to Crenulatin molecule than calcium cation. The calculated value of Mg²⁺ cation affinity, including the zero-point vibrational energy (ZPE) and basis set superposition error (BSSE), is 231.8 kcal mol⁻¹ for the most stable complex. Entropy (ΔS) and free energy (ΔG) variations for the metalation processes considered here have also been reported. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Thermodynamic characteristics of the complexation between Pb<Superscript>2+</Superscript> and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Bis(carboxymethyl)aspartic acid in aqueous solution

The enthalpies of complexation between N,N-bis(carboxymethyl)aspartic acid (H₄Y) and the Pb²⁺ ion at 298.15 K were determined from calorimetric data for a wide range of the ionic strengths (KNO₃). The thermodynamic characteristics ΔH, ΔG, and ΔS, of formation of the complexes PbHY⁻ and PbY²⁻ were calculated for zero and fixed ionic strengths. The results obtained were interpreted.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Complexes of Zr<Superscript>IV</Superscript> and Hf<Superscript>IV</Superscript> with monolacunary Keggin-and Dawson-type anions

The reactions of the tetranuclear hydroxo complexes [M₄(μ₂-OH)₈(H₂O)₁₆]⁸⁺ (M = Zr or Hf) with the lacunary Keggin-type ([α-PW₁₁O₃₉]⁷⁻) and Dawson-type ([α ₂-P₂W₁₇O₆₁]¹⁰⁻) phosphotungstates in aqueous solutions produce the sandwich polyoxometalate complexes [M(α-PW₁₁O₃₉)₂]¹⁰⁻ (M = Zr (1) or Hf (2)) and [M(α ₂-P₂W₁₇O₆₁)₂]¹⁶⁻ (M = Zr (3) and Hf (4)). The complexes were isolated and structurally characterized as salts with potassium and dimethylammonium cations. The zirconium and hafnium atoms have a square antiprismatic coordination environment (coordination number is 8). In all complexes, the mutual arrangement of the ligands corresponds to the syn isomer. Hafnium complexes 2 and 4 are the first structurally characterized polyoxometalate complexes of this metal. The structures of the resulting compounds were confirmed also by ³¹P NMR spectroscopy in solution. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 214–218, February, 2007.     

Calculations of chemical equilibria in heparin-arginine-H<Subscript>2</Subscript>O-NaCl and MCl<Subscript>2</Subscript>-heparin-arginine-H<Subscript>2</Subscript>O-NaCl systems (M = Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>) in a physiological solution

Chemical equilibria in the high-molecular-weight heparin (Na₄hep)-arginine (HArg)-H₂O-NaCl and MCl₂-Na₄hep-HArg-H₂O-NaCl systems of electrolytes (M = Ca²⁺, Mg²⁺) were calculated by the method of mathematical simulation of chemical equilibria from representative planned pH-metric titration experiment at 2.30 ≤ pH ≤ 10.50 in a physiological solution medium in the presence of 0.154 M NaCl as a background electrolyte at 37°C. The initial concentrations of the basic components were n × 10⁻³ M (n ≤ 4).     

Reactions of [Cp*Ru(H<Subscript>2</Subscript>O)(NBD)]<Superscript>+</Superscript> with diynes

Abstract  Formal [2 + 2 + 2] addition reaction of [Cp*Ru(H₂O)(NBD)][BF₄] (NBD = norbornadiene) with 4,4′-Diethynylbiphenyl generates [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂. The reaction of [Cp*Ru(H₂O)(NBD)][BF₄] with 1,4-diphenylbutadiyne generates the unusual [2 + 2 + 2] additional organic compound Ph–C≡C–C₉H₈–Ph in addition to the organometallic compound [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄]. [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BPh₄]₂ is generated after the reaction of compound [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂ with Na[BPh₄]. The structure of this compound was confirmed by X-ray diffraction. A possible approach to form Ph–C≡C–C₉H₈–Ph and [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄] is suggested. Graphical Abstract  Formal [2 + 2 + 2] addition reaction of [Cp*Ru(H₂O)(NBD)]BF₄ (NBD = norbornadiene) with 4,4′-Diethynylbiphenyl generates [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂. The reaction of [Cp*Ru(H₂O)(NBD)][BF₄] with 1,4-diphenylbutadiyne simply generates unusual [2 + 2 + 2] additional organic compound Ph–C≡C–C₉H₈–Ph in addition to the organometallic compound [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄]. [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BPh₄]₂ is generated after the reaction of compound [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂ with Na[BPh₄]. The structure of this compound was confirmed by X-ray diffraction. And the possible approach to form Ph–C≡C–C₉H₈–Ph and [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄] was suggested. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cellulose wet wiper sheets prepared with cationic polymer and carboxymethyl cellulose using a papermaking technique

Carboxymethyl cellulose (CMC)-rich cellulose sheets were prepared with a cationic retention aid, poly[N,N,N-trimethyl-N-(2-methacryloxyethyl)ammonium chloride] (PTMMAC), using a papermaking technique. When 5% PTMMAC and 5% CMC were added to cellulose slurries, approximately 94% of the polymers were retained in the sheets by formation of polyion complexes between the two polymers. When the PTMMAC/CMC/cellulose sheets were soaked in solutions consisting of ethanol, water and calcium chloride (EtOH/H₂O/CaCl₂) with a weight ratio of 75:24:1, almost all PTMMAC and CMC molecules remained in the sheets, forming the structures of PTMMAC-N⁺Cl⁻ and CMC-COO⁻Ca²⁺Cl⁻ without dissolution of these molecules in the soaking solution. Thus, PTMMAC, CMC and calcium contents in the sheets were able to be determined on the basis of these PTMMAC and CMC structures from analytical data such as nitrogen, calcium and chlorine contents. The trade-off properties between sufficient wet strength in use and water-disintegrability after use can be added to the PTMMAC/CMC/cellulose sheets by selecting weight ratios of the EtOH/H₂O/CaCl₂ solution used as the impregnation liquid.     

Synthesis,characterization and DNA-binding studies of 1-(pyridin-2-yl)-3-tosylurea and its Nd<Superscript>III</Superscript>, Eu<Superscript>III</Superscript> complexes

1-(Pyridin-2-yl)-3-tosylurea(HL) and its two lanthanide complexes, LnL₃ · H₂O [Ln = Nd(1), Eu(2)], have been synthesized and characterized on the base of elemental analyses, molar conductivities, IR spectra and thermal analyses. In addition, the DNA-binding properties of the two complexes have been investigated by absorption, fluorescence and viscosity measurements. The experimental results indicated that the complex (1) and (2) can bind to DNA; the binding affinity of the complex (1) is higher than that of complex (2) and the intrinsic binding constants of complex (1) and complex (2) with DNA were 1.24 × 10⁴ m ⁻¹ and 8.7 × 10³ m ⁻¹, respectively. In addition, some factors that influence the fluorescent intensity were also discussed.     

Investigation on sonocatalytic damage of BSA under ultrasonic irradiation by Fe<Superscript>III</Superscript> complexes with some aminocarboxylic acid

The interaction of BSA and Fe^III complexes ([Fe^III(gly)(H₂O)₄]²⁺, [Fe^III(ida)(H₂O)₃]⁺, and [Fe^III(nta)(H₂O)₂], gly—glyane, ida—iminodiacetic acid, nta—triglycolamic acid) as well as the sonocatalytic damage to BSA was studied by UV-vis and fluorescence spectra. In addition, the influences of ultrasonic irradiation time and Fe^III complex concentration were also examined on the sonocatalytic damage to BSA. The results showed that the fluorescence quenching of BSA solution caused by the Fe^III complexes belonged to the static quenching process. The BSA and Fe^III complexes interacted with each other mainly through weak interaction and coordinate actions. The binding association constants (K) and binding site numbers (n) were calculated. The results were as follows: K ₁ = 0.5353 × 10⁴ l mol⁻¹ and n ₁ = 0.9812 for [Fe^III(gly)(H₂O)₄]²⁺, K ₂ = 1.4285 × 10⁴ l mol⁻¹ and n ₂ = 1.0899 for [Fe^III(ida)(H₂O)₃, and K ₃ = 0.4411 × 10⁴ l mol⁻¹ and n ₃ = 0.9471 for [Fe^III(nta)(H₂O)₂]. Otherwise, under ultrasonic irradiation the BSA were obviously damaged by the Fe^III complexes. The damage degree rose up with the increase of ultrasonic irradiation time and Fe^III complex concentration. And that, [Fe^III(nta)(H₂O)₂] exhibited in a way higher sonocatalytic activity than [Fe^III(gly)(H₂O)₄]²⁺ and [Fe^III(ida)(H₂O)₃]⁺.     

Syntheses,Structures of Two Rare Earth-Vanadyl Complexes and Highly Selective Fluorescence Detection of Zn<Superscript>2+</Superscript>

Two rare earth vanadyl complexes incorporating N-(p-benzoic acid methylene)imino dimethylene phosphonic acid, {[Ce(H₂O)₇]₂[V₁₀O₂₈]}·11H₂O (1) and {[Gd(H₂O)₇]₂[V₁₀O₂₈]}·11H₂O (2) were synthesized and characterized by IR spectra, UV-Vis spectra, Fluorescence spectra and single crystal X-ray analysis. In complexes 1 and 2, they are isomorphism, triclinic, space group P-1, V⁵⁺ ion for the hexa-coordinate with oxygen constitute [V₁₀O₂₈] ⁶⁻ cluster, in which oxygen were taken μ1, μ2, μ3, μ6 method of allocation. Ce³⁺ ion is nine-coordinate. Complex 1 has a very strong selective of Zn²⁺ from the fluorescence spectra, and can as highly selective probes for Zn²⁺.